From patchwork Wed Feb 9 08:47:47 2011 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jan Beulich X-Patchwork-Id: 543251 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by demeter1.kernel.org (8.14.4/8.14.3) with ESMTP id p198lEbQ003180 for ; Wed, 9 Feb 2011 08:47:14 GMT Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752952Ab1BIIrN (ORCPT ); Wed, 9 Feb 2011 03:47:13 -0500 Received: from vpn.id2.novell.com ([195.33.99.129]:36332 "EHLO vpn.id2.novell.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752415Ab1BIIrM convert rfc822-to-8bit (ORCPT ); Wed, 9 Feb 2011 03:47:12 -0500 Received: from EMEA1-MTA by vpn.id2.novell.com with Novell_GroupWise; Wed, 09 Feb 2011 08:47:09 +0000 Message-Id: <4D5262C30200007800030F9C@vpn.id2.novell.com> X-Mailer: Novell GroupWise Internet Agent 8.0.1 Date: Wed, 09 Feb 2011 08:47:47 +0000 From: "Jan Beulich" To: Cc: , , , , "Jesse Barnes" , Subject: [PATCH] move some .pci_fixup_* sections into .init Mime-Version: 1.0 Content-Disposition: inline Sender: linux-kbuild-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kbuild@vger.kernel.org X-Greylist: IP, sender and recipient auto-whitelisted, not delayed by milter-greylist-4.2.6 (demeter1.kernel.org [140.211.167.41]); Wed, 09 Feb 2011 08:47:14 +0000 (UTC) --- 2.6.38-rc4/arch/x86/kernel/pci-dma.c +++ 2.6.38-rc4-pci-fixup-sections/arch/x86/kernel/pci-dma.c @@ -312,7 +312,7 @@ rootfs_initcall(pci_iommu_init); #ifdef CONFIG_PCI /* Many VIA bridges seem to corrupt data for DAC. Disable it here */ -static __devinit void via_no_dac(struct pci_dev *dev) +static __init void via_no_dac(struct pci_dev *dev) { if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI && forbid_dac == 0) { dev_info(&dev->dev, "disabling DAC on VIA PCI bridge\n"); --- 2.6.38-rc4/arch/x86/kernel/quirks.c +++ 2.6.38-rc4-pci-fixup-sections/arch/x86/kernel/quirks.c @@ -8,7 +8,7 @@ #if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_SMP) && defined(CONFIG_PCI) -static void __devinit quirk_intel_irqbalance(struct pci_dev *dev) +static void __init quirk_intel_irqbalance(struct pci_dev *dev) { u8 config, rev; u16 word; --- 2.6.38-rc4/arch/x86/pci/fixup.c +++ 2.6.38-rc4-pci-fixup-sections/arch/x86/pci/fixup.c @@ -249,7 +249,7 @@ static struct pci_ops quirk_pcie_aspm_op * the root port in an array for fast indexing. Replace the bus ops * with the modified one. */ -static void pcie_rootport_aspm_quirk(struct pci_dev *pdev) +static void __init pcie_rootport_aspm_quirk(struct pci_dev *pdev) { int cap_base, i; struct pci_bus *pbus; @@ -413,7 +413,7 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_V */ static u16 toshiba_line_size; -static const struct dmi_system_id __devinitconst toshiba_ohci1394_dmi_table[] = { +static const struct dmi_system_id toshiba_ohci1394_dmi_table[] = { { .ident = "Toshiba PS5 based laptop", .matches = { @@ -449,7 +449,7 @@ static void __devinit pci_pre_fixup_tosh DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TI, 0x8032, pci_pre_fixup_toshiba_ohci1394); -static void __devinit pci_post_fixup_toshiba_ohci1394(struct pci_dev *dev) +static void pci_post_fixup_toshiba_ohci1394(struct pci_dev *dev) { if (!dmi_check_system(toshiba_ohci1394_dmi_table)) return; /* only applies to certain Toshibas (so far) */ --- 2.6.38-rc4/drivers/clocksource/acpi_pm.c +++ 2.6.38-rc4-pci-fixup-sections/drivers/clocksource/acpi_pm.c @@ -73,7 +73,7 @@ static struct clocksource clocksource_ac #ifdef CONFIG_PCI -static int __devinitdata acpi_pm_good; +static int acpi_pm_good; static int __init acpi_pm_good_setup(char *__str) { acpi_pm_good = 1; @@ -102,7 +102,7 @@ static inline void acpi_pm_need_workarou * incorrect when read). As a result, the ACPI free running count up * timer specification is violated due to erroneous reads. */ -static void __devinit acpi_pm_check_blacklist(struct pci_dev *dev) +static void acpi_pm_check_blacklist(struct pci_dev *dev) { if (acpi_pm_good) return; @@ -120,7 +120,7 @@ static void __devinit acpi_pm_check_blac DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, acpi_pm_check_blacklist); -static void __devinit acpi_pm_check_graylist(struct pci_dev *dev) +static void acpi_pm_check_graylist(struct pci_dev *dev) { if (acpi_pm_good) return; --- 2.6.38-rc4/drivers/pci/quirks.c +++ 2.6.38-rc4-pci-fixup-sections/drivers/pci/quirks.c @@ -97,7 +97,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI * key system devices. For devices that need to have mmio decoding always-on, * we need to set the dev->mmio_always_on bit. */ -static void __devinit quirk_mmio_always_on(struct pci_dev *dev) +static void quirk_mmio_always_on(struct pci_dev *dev) { if ((dev->class >> 8) == PCI_CLASS_BRIDGE_HOST) dev->mmio_always_on = 1; @@ -108,7 +108,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ * Mark this device with a broken_parity_status, to allow * PCI scanning code to "skip" this now blacklisted device. */ -static void __devinit quirk_mellanox_tavor(struct pci_dev *dev) +static void __init quirk_mellanox_tavor(struct pci_dev *dev) { dev->broken_parity_status = 1; /* This device gives false positives */ } @@ -117,7 +117,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ME /* Deal with broken BIOS'es that neglect to enable passive release, which can cause problems in combination with the 82441FX/PPro MTRRs */ -static void quirk_passive_release(struct pci_dev *dev) +static void __devinit quirk_passive_release(struct pci_dev *dev) { struct pci_dev *d = NULL; unsigned char dlc; @@ -143,7 +143,7 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_I This appears to be BIOS not version dependent. So presumably there is a chipset level fix */ -static void __devinit quirk_isa_dma_hangs(struct pci_dev *dev) +static void __init quirk_isa_dma_hangs(struct pci_dev *dev) { if (!isa_dma_bridge_buggy) { isa_dma_bridge_buggy=1; @@ -185,7 +185,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I /* * Chipsets where PCI->PCI transfers vanish or hang */ -static void __devinit quirk_nopcipci(struct pci_dev *dev) +static void __init quirk_nopcipci(struct pci_dev *dev) { if ((pci_pci_problems & PCIPCI_FAIL)==0) { dev_info(&dev->dev, "Disabling direct PCI/PCI transfers\n"); @@ -195,7 +195,7 @@ static void __devinit quirk_nopcipci(str DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5597, quirk_nopcipci); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_496, quirk_nopcipci); -static void __devinit quirk_nopciamd(struct pci_dev *dev) +static void __init quirk_nopciamd(struct pci_dev *dev) { u8 rev; pci_read_config_byte(dev, 0x08, &rev); @@ -210,7 +210,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AM /* * Triton requires workarounds to be used by the drivers */ -static void __devinit quirk_triton(struct pci_dev *dev) +static void __init quirk_triton(struct pci_dev *dev) { if ((pci_pci_problems&PCIPCI_TRITON)==0) { dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n"); @@ -233,7 +233,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN * Updated based on further information from the site and also on * information provided by VIA */ -static void quirk_vialatency(struct pci_dev *dev) +static void __devinit quirk_vialatency(struct pci_dev *dev) { struct pci_dev *p; u8 busarb; @@ -289,7 +289,7 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_V /* * VIA Apollo VP3 needs ETBF on BT848/878 */ -static void __devinit quirk_viaetbf(struct pci_dev *dev) +static void __init quirk_viaetbf(struct pci_dev *dev) { if ((pci_pci_problems&PCIPCI_VIAETBF)==0) { dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n"); @@ -298,7 +298,7 @@ static void __devinit quirk_viaetbf(stru } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C597_0, quirk_viaetbf); -static void __devinit quirk_vsfx(struct pci_dev *dev) +static void __init quirk_vsfx(struct pci_dev *dev) { if ((pci_pci_problems&PCIPCI_VSFX)==0) { dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n"); @@ -327,7 +327,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL * Natoma has some interesting boundary conditions with Zoran stuff * at least */ -static void __devinit quirk_natoma(struct pci_dev *dev) +static void __init quirk_natoma(struct pci_dev *dev) { if ((pci_pci_problems&PCIPCI_NATOMA)==0) { dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n"); @@ -412,7 +412,7 @@ static void __devinit quirk_io_region(st * ATI Northbridge setups MCE the processor if you even * read somewhere between 0x3b0->0x3bb or read 0x3d3 */ -static void __devinit quirk_ati_exploding_mce(struct pci_dev *dev) +static void __init quirk_ati_exploding_mce(struct pci_dev *dev) { dev_info(&dev->dev, "ATI Northbridge, reserving I/O ports 0x3b0 to 0x3bb\n"); /* Mae rhaid i ni beidio ag edrych ar y lleoliadiau I/O hyn */ @@ -721,7 +721,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_V * TI XIO2000a PCIe-PCI Bridge erroneously reports it supports fast back-to-back: * Disable fast back-to-back on the secondary bus segment */ -static void __devinit quirk_xio2000a(struct pci_dev *dev) +static void __init quirk_xio2000a(struct pci_dev *dev) { struct pci_dev *pdev; u16 command; @@ -748,7 +748,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TI * TODO: When we have device-specific interrupt routers, * this code will go away from quirks. */ -static void quirk_via_ioapic(struct pci_dev *dev) +static void __devinit quirk_via_ioapic(struct pci_dev *dev) { u8 tmp; @@ -772,7 +772,7 @@ DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDO * Set this bit to get rid of cycle wastage. * Otherwise uncritical. */ -static void quirk_via_vt8237_bypass_apic_deassert(struct pci_dev *dev) +static void __devinit quirk_via_vt8237_bypass_apic_deassert(struct pci_dev *dev) { u8 misc_control2; #define BYPASS_APIC_DEASSERT 8 @@ -795,7 +795,7 @@ DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDO * noapic specified. For the moment we assume it's the erratum. We may be wrong * of course. However the advice is demonstrably good even if so.. */ -static void __devinit quirk_amd_ioapic(struct pci_dev *dev) +static void __init quirk_amd_ioapic(struct pci_dev *dev) { if (dev->revision >= 0x02) { dev_warn(&dev->dev, "I/O APIC: AMD Erratum #22 may be present. In the event of instability try\n"); @@ -954,7 +954,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_V * do this even if the Linux CardBus driver is not loaded, because * the Linux i82365 driver does not (and should not) handle CardBus. */ -static void quirk_cardbus_legacy(struct pci_dev *dev) +static void __devinit quirk_cardbus_legacy(struct pci_dev *dev) { if ((PCI_CLASS_BRIDGE_CARDBUS << 8) ^ dev->class) return; @@ -970,7 +970,7 @@ DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_ANY_I * To be fair to AMD, it follows the spec by default, its BIOS people * who turn it off! */ -static void quirk_amd_ordering(struct pci_dev *dev) +static void __devinit quirk_amd_ordering(struct pci_dev *dev) { u32 pcic; pci_read_config_dword(dev, 0x4C, &pcic); @@ -1020,7 +1020,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_T * datasheets found at http://www.national.com/analog for info on what * these bits do. */ -static void quirk_mediagx_master(struct pci_dev *dev) +static void __devinit quirk_mediagx_master(struct pci_dev *dev) { u8 reg; pci_read_config_byte(dev, 0x41, ®); @@ -1038,7 +1038,7 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_C * the BIOS but in the odd case it is not the results are corruption * hence the presence of a Linux check */ -static void quirk_disable_pxb(struct pci_dev *pdev) +static void __devinit quirk_disable_pxb(struct pci_dev *pdev) { u16 config; @@ -1081,7 +1081,7 @@ DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDO /* * Serverworks CSB5 IDE does not fully support native mode */ -static void __devinit quirk_svwks_csb5ide(struct pci_dev *pdev) +static void quirk_svwks_csb5ide(struct pci_dev *pdev) { u8 prog; pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog); @@ -1097,7 +1097,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SE /* * Intel 82801CAM ICH3-M datasheet says IDE modes must be the same */ -static void __init quirk_ide_samemode(struct pci_dev *pdev) +static void quirk_ide_samemode(struct pci_dev *pdev) { u8 prog; @@ -1116,7 +1116,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_IN * Some ATA devices break if put into D3 */ -static void __devinit quirk_no_ata_d3(struct pci_dev *pdev) +static void quirk_no_ata_d3(struct pci_dev *pdev) { /* Quirk the legacy ATA devices only. The AHCI ones are ok */ if ((pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) @@ -1573,7 +1573,7 @@ static void __init quirk_alder_ioapic(st DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EESSC, quirk_alder_ioapic); #endif -static void __devinit quirk_pcie_mch(struct pci_dev *pdev) +static void __init quirk_pcie_mch(struct pci_dev *pdev) { pci_msi_off(pdev); pdev->no_msi = 1; @@ -1587,7 +1587,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN * It's possible for the MSI to get corrupted if shpc and acpi * are used together on certain PXH-based systems. */ -static void __devinit quirk_pcie_pxh(struct pci_dev *dev) +static void quirk_pcie_pxh(struct pci_dev *dev) { pci_msi_off(dev); dev->no_msi = 1; @@ -1603,7 +1603,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_IN * Some Intel PCI Express chipsets have trouble with downstream * device power management. */ -static void quirk_intel_pcie_pm(struct pci_dev * dev) +static void __init quirk_intel_pcie_pm(struct pci_dev * dev) { pci_pm_d3_delay = 120; dev->no_d1d2 = 1; @@ -1638,7 +1638,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN * that a PCI device's interrupt handler is installed on the boot interrupt * line instead. */ -static void quirk_reroute_to_boot_interrupts_intel(struct pci_dev *dev) +static void __devinit quirk_reroute_to_boot_interrupts_intel(struct pci_dev *dev) { if (noioapicquirk || noioapicreroute) return; @@ -1676,7 +1676,7 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_I #define INTEL_6300_IOAPIC_ABAR 0x40 #define INTEL_6300_DISABLE_BOOT_IRQ (1<<14) -static void quirk_disable_intel_boot_interrupt(struct pci_dev *dev) +static void __devinit quirk_disable_intel_boot_interrupt(struct pci_dev *dev) { u16 pci_config_word; @@ -1701,7 +1701,7 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_I #define BC_HT1000_MAP_IDX 0xC00 #define BC_HT1000_MAP_DATA 0xC01 -static void quirk_disable_broadcom_boot_interrupt(struct pci_dev *dev) +static void __devinit quirk_disable_broadcom_boot_interrupt(struct pci_dev *dev) { u32 pci_config_dword; u8 irq; @@ -1739,7 +1739,7 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_S #define AMD_813X_REV_B1 0x12 #define AMD_813X_REV_B2 0x13 -static void quirk_disable_amd_813x_boot_interrupt(struct pci_dev *dev) +static void __devinit quirk_disable_amd_813x_boot_interrupt(struct pci_dev *dev) { u32 pci_config_dword; @@ -1763,7 +1763,7 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_A #define AMD_8111_PCI_IRQ_ROUTING 0x56 -static void quirk_disable_amd_8111_boot_interrupt(struct pci_dev *dev) +static void __devinit quirk_disable_amd_8111_boot_interrupt(struct pci_dev *dev) { u16 pci_config_word; @@ -1840,7 +1840,7 @@ static void __devinit quirk_netmos(struc } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NETMOS, PCI_ANY_ID, quirk_netmos); -static void __devinit quirk_e100_interrupt(struct pci_dev *dev) +static void __init quirk_e100_interrupt(struct pci_dev *dev) { u16 command, pmcsr; u8 __iomem *csr; @@ -1912,7 +1912,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN * The 82575 and 82598 may experience data corruption issues when transitioning * out of L0S. To prevent this we need to disable L0S on the pci-e link */ -static void __devinit quirk_disable_aspm_l0s(struct pci_dev *dev) +static void __init quirk_disable_aspm_l0s(struct pci_dev *dev) { dev_info(&dev->dev, "Disabling L0s\n"); pci_disable_link_state(dev, PCIE_LINK_STATE_L0S); @@ -1975,7 +1975,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I * The IOBL_ADR gets re-written to 4k boundaries in pci_setup_bridge() * in drivers/pci/setup-bus.c */ -static void __devinit quirk_p64h2_1k_io_fix_iobl(struct pci_dev *dev) +static void __init quirk_p64h2_1k_io_fix_iobl(struct pci_dev *dev) { u16 en1k, iobl_adr, iobl_adr_1k; struct resource *res = dev->resource + PCI_BRIDGE_RESOURCES; @@ -2000,7 +2000,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN * Force it to be linked by setting the corresponding control bit in the * config space. */ -static void quirk_nvidia_ck804_pcie_aer_ext_cap(struct pci_dev *dev) +static void __devinit quirk_nvidia_ck804_pcie_aer_ext_cap(struct pci_dev *dev) { uint8_t b; if (pci_read_config_byte(dev, 0xf41, &b) == 0) { @@ -2016,7 +2016,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NV DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE, quirk_nvidia_ck804_pcie_aer_ext_cap); -static void __devinit quirk_via_cx700_pci_parking_caching(struct pci_dev *dev) +static void __init quirk_via_cx700_pci_parking_caching(struct pci_dev *dev) { /* * Disable PCI Bus Parking and PCI Master read caching on CX700 @@ -2079,7 +2079,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VI * We believe that it is legal to read beyond the end tag and * therefore the solution is to limit the read/write length. */ -static void __devinit quirk_brcm_570x_limit_vpd(struct pci_dev *dev) +static void __init quirk_brcm_570x_limit_vpd(struct pci_dev *dev) { /* * Only disable the VPD capability for 5706, 5706S, 5708, @@ -2121,7 +2121,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BR * the DRBs - this is where we expose device 6. * http://www.x86-secret.com/articles/tweak/pat/patsecrets-2.htm */ -static void __devinit quirk_unhide_mch_dev6(struct pci_dev *dev) +static void quirk_unhide_mch_dev6(struct pci_dev *dev) { u8 reg; @@ -2145,7 +2145,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_IN * supports link speed auto negotiation, but falsely sets * the link speed to 5GT/s. */ -static void __devinit quirk_tile_plx_gen1(struct pci_dev *dev) +static void quirk_tile_plx_gen1(struct pci_dev *dev) { if (tile_plx_gen1) { pci_write_config_dword(dev, 0x98, 0x1); @@ -2176,7 +2176,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VI DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8380_0, quirk_disable_all_msi); /* Disable MSI on chipsets that are known to not support it */ -static void __devinit quirk_disable_msi(struct pci_dev *dev) +static void __init quirk_disable_msi(struct pci_dev *dev) { if (dev->subordinate) { dev_warn(&dev->dev, "MSI quirk detected; " @@ -2194,7 +2194,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AT * we use the possible vendor/device IDs of the host bridge for the * declared quirk, and search for the APC bridge by slot number. */ -static void __devinit quirk_amd_780_apc_msi(struct pci_dev *host_bridge) +static void __init quirk_amd_780_apc_msi(struct pci_dev *host_bridge) { struct pci_dev *apc_bridge; @@ -2234,7 +2234,7 @@ static int __devinit msi_ht_cap_enabled( } /* Check the hypertransport MSI mapping to know whether MSI is enabled or not */ -static void __devinit quirk_msi_ht_cap(struct pci_dev *dev) +static void __init quirk_msi_ht_cap(struct pci_dev *dev) { if (dev->subordinate && !msi_ht_cap_enabled(dev)) { dev_warn(&dev->dev, "MSI quirk detected; " @@ -2248,7 +2248,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SE /* The nVidia CK804 chipset may have 2 HT MSI mappings. * MSI are supported if the MSI capability set in any of these mappings. */ -static void __devinit quirk_nvidia_ck804_msi_ht_cap(struct pci_dev *dev) +static void __init quirk_nvidia_ck804_msi_ht_cap(struct pci_dev *dev) { struct pci_dev *pdev; @@ -2302,7 +2302,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_A * for the MCP55 NIC. It is not yet determined whether the msi problem * also affects other devices. As for now, turn off msi for this device. */ -static void __devinit nvenet_msi_disable(struct pci_dev *dev) +static void nvenet_msi_disable(struct pci_dev *dev) { if (dmi_name_in_vendors("P5N32-SLI PREMIUM") || dmi_name_in_vendors("P5N32-E SLI")) { @@ -2325,7 +2325,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NV * we have it set correctly. * Note this is an undocumented register. */ -static void __devinit nvbridge_check_legacy_irq_routing(struct pci_dev *dev) +static void nvbridge_check_legacy_irq_routing(struct pci_dev *dev) { u32 cfg; @@ -2558,11 +2558,11 @@ DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDO DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_ANY_ID, nv_msi_ht_cap_quirk_all); DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AL, PCI_ANY_ID, nv_msi_ht_cap_quirk_all); -static void __devinit quirk_msi_intx_disable_bug(struct pci_dev *dev) +static void __init quirk_msi_intx_disable_bug(struct pci_dev *dev) { dev->dev_flags |= PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG; } -static void __devinit quirk_msi_intx_disable_ati_bug(struct pci_dev *dev) +static void __init quirk_msi_intx_disable_ati_bug(struct pci_dev *dev) { struct pci_dev *p; @@ -2820,7 +2820,7 @@ extern struct pci_fixup __start_pci_fixu extern struct pci_fixup __end_pci_fixups_suspend[]; -void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev) +void __ref pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev) { struct pci_fixup *start, *end; @@ -2866,7 +2866,6 @@ void pci_fixup_device(enum pci_fixup_pas } pci_do_fixups(dev, start, end); } -EXPORT_SYMBOL(pci_fixup_device); static int __init pci_apply_final_quirks(void) { --- 2.6.38-rc4/drivers/usb/host/pci-quirks.c +++ 2.6.38-rc4-pci-fixup-sections/drivers/usb/host/pci-quirks.c @@ -466,7 +466,7 @@ hc_init: iounmap(base); } -static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev) +static void __init quirk_usb_early_handoff(struct pci_dev *pdev) { if (pdev->class == PCI_CLASS_SERIAL_USB_UHCI) quirk_usb_handoff_uhci(pdev); --- 2.6.38-rc4/include/asm-generic/vmlinux.lds.h +++ 2.6.38-rc4-pci-fixup-sections/include/asm-generic/vmlinux.lds.h @@ -98,6 +98,19 @@ #define MEM_DISCARD(sec) *(.mem##sec) #endif +#define PCI_FIXUPS(what) \ + VMLINUX_SYMBOL(__start_pci_fixups_##what) = .; \ + *(.pci_fixup_##what) \ + VMLINUX_SYMBOL(__end_pci_fixups_##what) = .; + +#ifdef CONFIG_PM_OPS +#define PCI_FIXUPS_PM_KEEP PCI_FIXUPS +#define PCI_FIXUPS_PM_DISCARD(what) +#else +#define PCI_FIXUPS_PM_KEEP(what) +#define PCI_FIXUPS_PM_DISCARD PCI_FIXUPS +#endif + #ifdef CONFIG_FTRACE_MCOUNT_RECORD #define MCOUNT_REC() . = ALIGN(8); \ VMLINUX_SYMBOL(__start_mcount_loc) = .; \ @@ -232,27 +245,12 @@ \ /* PCI quirks */ \ .pci_fixup : AT(ADDR(.pci_fixup) - LOAD_OFFSET) { \ - VMLINUX_SYMBOL(__start_pci_fixups_early) = .; \ - *(.pci_fixup_early) \ - VMLINUX_SYMBOL(__end_pci_fixups_early) = .; \ - VMLINUX_SYMBOL(__start_pci_fixups_header) = .; \ - *(.pci_fixup_header) \ - VMLINUX_SYMBOL(__end_pci_fixups_header) = .; \ - VMLINUX_SYMBOL(__start_pci_fixups_final) = .; \ - *(.pci_fixup_final) \ - VMLINUX_SYMBOL(__end_pci_fixups_final) = .; \ - VMLINUX_SYMBOL(__start_pci_fixups_enable) = .; \ - *(.pci_fixup_enable) \ - VMLINUX_SYMBOL(__end_pci_fixups_enable) = .; \ - VMLINUX_SYMBOL(__start_pci_fixups_resume) = .; \ - *(.pci_fixup_resume) \ - VMLINUX_SYMBOL(__end_pci_fixups_resume) = .; \ - VMLINUX_SYMBOL(__start_pci_fixups_resume_early) = .; \ - *(.pci_fixup_resume_early) \ - VMLINUX_SYMBOL(__end_pci_fixups_resume_early) = .; \ - VMLINUX_SYMBOL(__start_pci_fixups_suspend) = .; \ - *(.pci_fixup_suspend) \ - VMLINUX_SYMBOL(__end_pci_fixups_suspend) = .; \ + PCI_FIXUPS(early) \ + PCI_FIXUPS(header) \ + PCI_FIXUPS(enable) \ + PCI_FIXUPS_PM_KEEP(resume) \ + PCI_FIXUPS_PM_KEEP(resume_early) \ + PCI_FIXUPS_PM_KEEP(suspend) \ } \ \ /* Built-in firmware blobs */ \ @@ -478,6 +476,11 @@ CPU_DISCARD(init.data) \ MEM_DISCARD(init.data) \ KERNEL_CTORS() \ + . = ALIGN(16); \ + PCI_FIXUPS(final) \ + PCI_FIXUPS_PM_DISCARD(resume) \ + PCI_FIXUPS_PM_DISCARD(resume_early) \ + PCI_FIXUPS_PM_DISCARD(suspend) \ *(.init.rodata) \ MCOUNT_REC() \ FTRACE_EVENTS() \ --- 2.6.38-rc4/scripts/mod/modpost.c +++ 2.6.38-rc4-pci-fixup-sections/scripts/mod/modpost.c @@ -826,8 +826,9 @@ static void check_section(const char *mo #define ALL_INIT_DATA_SECTIONS \ ".init.setup$", ".init.rodata$", \ - ".devinit.rodata$", ".cpuinit.rodata$", ".meminit.rodata$" \ - ".init.data$", ".devinit.data$", ".cpuinit.data$", ".meminit.data$" + ".devinit.rodata$", ".cpuinit.rodata$", ".meminit.rodata$", \ + ".init.data$", ".devinit.data$", ".cpuinit.data$", ".meminit.data$", \ + ".pci_fixup_final$", ".pci_fixup_suspend*", ".pci_fixup_resume*" #define ALL_EXIT_DATA_SECTIONS \ ".exit.data$", ".devexit.data$", ".cpuexit.data$", ".memexit.data$" @@ -844,11 +845,13 @@ static void check_section(const char *mo #define ALL_INIT_SECTIONS INIT_SECTIONS, ALL_XXXINIT_SECTIONS #define ALL_EXIT_SECTIONS EXIT_SECTIONS, ALL_XXXEXIT_SECTIONS -#define DATA_SECTIONS ".data$", ".data.rel$" +#define DATA_SECTIONS ".data$", ".data.rel$", ".pci_fixup$", \ + ".pci_fixup_early$", ".pci_fixup_enable$"/*, ".pci_fixup_header$"*/ #define TEXT_SECTIONS ".text$" -#define INIT_SECTIONS ".init.*" -#define DEV_INIT_SECTIONS ".devinit.*" +#define INIT_SECTIONS ".init.*", ".pci_fixup_final$" +#define DEV_INIT_SECTIONS ".devinit.*", \ + ".pci_fixup_suspend*", ".pci_fixup_resume*" #define CPU_INIT_SECTIONS ".cpuinit.*" #define MEM_INIT_SECTIONS ".meminit.*"