diff mbox series

[RFC,v4,09/17] powerpc64/bpf: Fold bpf_jit_emit_func_call_hlp() into bpf_jit_emit_func_call_rel()

Message ID abfa93c7c740d84869148f4609b6ea11a9697432.1720942106.git.naveen@kernel.org (mailing list archive)
State New
Headers show
Series powerpc: Core ftrace rework, support for ftrace direct and bpf trampolines | expand

Commit Message

Naveen N Rao July 14, 2024, 8:27 a.m. UTC
Commit 61688a82e047 ("powerpc/bpf: enable kfunc call") enhanced
bpf_jit_emit_func_call_hlp() to handle calls out to module region, where
bpf progs are generated. The only difference now between
bpf_jit_emit_func_call_hlp() and bpf_jit_emit_func_call_rel() is in
handling of the initial pass where target function address is not known.
Fold that logic into bpf_jit_emit_func_call_hlp() and rename it to
bpf_jit_emit_func_call_rel() to simplify bpf function call JIT code.

We don't actually need to load/restore TOC across a call out to a
different kernel helper or to a different bpf program since they all
work with the kernel TOC. We only need to do it if we have to call out
to a module function. So, guard TOC load/restore with appropriate
conditions.

Signed-off-by: Naveen N Rao <naveen@kernel.org>
---
 arch/powerpc/net/bpf_jit_comp64.c | 61 +++++++++----------------------
 1 file changed, 17 insertions(+), 44 deletions(-)
diff mbox series

Patch

diff --git a/arch/powerpc/net/bpf_jit_comp64.c b/arch/powerpc/net/bpf_jit_comp64.c
index 2cbcdf93cc19..f3be024fc685 100644
--- a/arch/powerpc/net/bpf_jit_comp64.c
+++ b/arch/powerpc/net/bpf_jit_comp64.c
@@ -202,14 +202,22 @@  void bpf_jit_build_epilogue(u32 *image, struct codegen_context *ctx)
 	EMIT(PPC_RAW_BLR());
 }
 
-static int
-bpf_jit_emit_func_call_hlp(u32 *image, u32 *fimage, struct codegen_context *ctx, u64 func)
+int bpf_jit_emit_func_call_rel(u32 *image, u32 *fimage, struct codegen_context *ctx, u64 func)
 {
 	unsigned long func_addr = func ? ppc_function_entry((void *)func) : 0;
 	long reladdr;
 
-	if (WARN_ON_ONCE(!kernel_text_address(func_addr)))
-		return -EINVAL;
+	/* bpf to bpf call, func is not known in the initial pass. Emit 5 nops as a placeholder */
+	if (!func) {
+		for (int i = 0; i < 5; i++)
+			EMIT(PPC_RAW_NOP());
+		/* elfv1 needs an additional instruction to load addr from descriptor */
+		if (IS_ENABLED(CONFIG_PPC64_ELF_ABI_V1))
+			EMIT(PPC_RAW_NOP());
+		EMIT(PPC_RAW_MTCTR(_R12));
+		EMIT(PPC_RAW_BCTRL());
+		return 0;
+	}
 
 #ifdef CONFIG_PPC_KERNEL_PCREL
 	reladdr = func_addr - local_paca->kernelbase;
@@ -266,7 +274,8 @@  bpf_jit_emit_func_call_hlp(u32 *image, u32 *fimage, struct codegen_context *ctx,
 			 * We can clobber r2 since we get called through a
 			 * function pointer (so caller will save/restore r2).
 			 */
-			EMIT(PPC_RAW_LD(_R2, bpf_to_ppc(TMP_REG_2), 8));
+			if (is_module_text_address(func_addr))
+				EMIT(PPC_RAW_LD(_R2, bpf_to_ppc(TMP_REG_2), 8));
 		} else {
 			PPC_LI64(_R12, func);
 			EMIT(PPC_RAW_MTCTR(_R12));
@@ -276,46 +285,14 @@  bpf_jit_emit_func_call_hlp(u32 *image, u32 *fimage, struct codegen_context *ctx,
 		 * Load r2 with kernel TOC as kernel TOC is used if function address falls
 		 * within core kernel text.
 		 */
-		EMIT(PPC_RAW_LD(_R2, _R13, offsetof(struct paca_struct, kernel_toc)));
+		if (is_module_text_address(func_addr))
+			EMIT(PPC_RAW_LD(_R2, _R13, offsetof(struct paca_struct, kernel_toc)));
 	}
 #endif
 
 	return 0;
 }
 
-int bpf_jit_emit_func_call_rel(u32 *image, u32 *fimage, struct codegen_context *ctx, u64 func)
-{
-	unsigned int i, ctx_idx = ctx->idx;
-
-	if (WARN_ON_ONCE(func && is_module_text_address(func)))
-		return -EINVAL;
-
-	/* skip past descriptor if elf v1 */
-	func += FUNCTION_DESCR_SIZE;
-
-	/* Load function address into r12 */
-	PPC_LI64(_R12, func);
-
-	/* For bpf-to-bpf function calls, the callee's address is unknown
-	 * until the last extra pass. As seen above, we use PPC_LI64() to
-	 * load the callee's address, but this may optimize the number of
-	 * instructions required based on the nature of the address.
-	 *
-	 * Since we don't want the number of instructions emitted to increase,
-	 * we pad the optimized PPC_LI64() call with NOPs to guarantee that
-	 * we always have a five-instruction sequence, which is the maximum
-	 * that PPC_LI64() can emit.
-	 */
-	if (!image)
-		for (i = ctx->idx - ctx_idx; i < 5; i++)
-			EMIT(PPC_RAW_NOP());
-
-	EMIT(PPC_RAW_MTCTR(_R12));
-	EMIT(PPC_RAW_BCTRL());
-
-	return 0;
-}
-
 static int bpf_jit_emit_tail_call(u32 *image, struct codegen_context *ctx, u32 out)
 {
 	/*
@@ -1102,11 +1079,7 @@  int bpf_jit_build_body(struct bpf_prog *fp, u32 *image, u32 *fimage, struct code
 			if (ret < 0)
 				return ret;
 
-			if (func_addr_fixed)
-				ret = bpf_jit_emit_func_call_hlp(image, fimage, ctx, func_addr);
-			else
-				ret = bpf_jit_emit_func_call_rel(image, fimage, ctx, func_addr);
-
+			ret = bpf_jit_emit_func_call_rel(image, fimage, ctx, func_addr);
 			if (ret)
 				return ret;