@@ -1,10 +1,10 @@
-# Makefile for kexec_load
+# Makefile for kexec tests
uname_M := $(shell uname -m 2>/dev/null || echo not)
ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/x86/ -e s/x86_64/x86/)
ifeq ($(ARCH),x86)
-TEST_PROGS := test_kexec_load.sh
+TEST_PROGS := test_kexec_load.sh test_kexec_file_load.sh
TEST_FILES := kexec_common_lib.sh
include ../lib.mk
@@ -4,6 +4,9 @@
# Kselftest framework defines: ksft_pass=0, ksft_fail=1, ksft_skip=4
VERBOSE="${VERBOSE:-1}"
+IKCONFIG="/tmp/config-`uname -r`"
+KERNEL_IMAGE="/boot/vmlinuz-`uname -r`"
+SECURITYFS=$(grep "securityfs" /proc/mounts | awk '{print $2}')
log_info()
{
@@ -74,3 +77,99 @@ require_root_privileges()
log_skip "requires root privileges"
fi
}
+
+# Look for config option in Kconfig file.
+# Return 1 for found and 0 for not found.
+kconfig_enabled()
+{
+ local config="$1"
+ local msg="$2"
+
+ grep -E -q $config $IKCONFIG
+ if [ $? -eq 0 ]; then
+ log_info "$msg"
+ return 1
+ fi
+ return 0
+}
+
+# Attempt to get the kernel config first via proc, and then by
+# extracting it from the kernel image or the configs.ko using
+# scripts/extract-ikconfig.
+# Return 1 for found.
+get_kconfig()
+{
+ local proc_config="/proc/config.gz"
+ local module_dir="/lib/modules/`uname -r`"
+ local configs_module="$module_dir/kernel/kernel/configs.ko"
+
+ if [ ! -f $proc_config ]; then
+ modprobe configs > /dev/null 2>&1
+ fi
+ if [ -f $proc_config ]; then
+ cat $proc_config | gunzip > $IKCONFIG 2>/dev/null
+ if [ $? -eq 0 ]; then
+ return 1
+ fi
+ fi
+
+ local extract_ikconfig="$module_dir/source/scripts/extract-ikconfig"
+ if [ ! -f $extract_ikconfig ]; then
+ log_skip "extract-ikconfig not found"
+ fi
+
+ $extract_ikconfig $KERNEL_IMAGE > $IKCONFIG 2>/dev/null
+ if [ $? -eq 1 ]; then
+ if [ ! -f $configs_module ]; then
+ log_skip "CONFIG_IKCONFIG not enabled"
+ fi
+ $extract_ikconfig $configs_module > $IKCONFIG
+ if [ $? -eq 1 ]; then
+ log_skip "CONFIG_IKCONFIG not enabled"
+ fi
+ fi
+ return 1
+}
+
+# Make sure that securityfs is mounted
+mount_securityfs()
+{
+ if [ -z $SECURITYFS ]; then
+ SECURITYFS=/sys/kernel/security
+ mount -t securityfs security $SECURITYFS
+ fi
+
+ if [ ! -d "$SECURITYFS" ]; then
+ log_fail "$SECURITYFS :securityfs is not mounted"
+ fi
+}
+
+# The policy rule format is an "action" followed by key-value pairs. This
+# function supports up to two key-value pairs, in any order.
+# For example: action func=<keyword> [appraise_type=<type>]
+# Return 1 for found and 0 for not found.
+check_ima_policy()
+{
+ local action="$1"
+ local keypair1="$2"
+ local keypair2="$3"
+ local ret=0
+
+ mount_securityfs
+
+ local ima_policy=$SECURITYFS/ima/policy
+ if [ ! -e $ima_policy ]; then
+ log_fail "$ima_policy not found"
+ fi
+
+ if [ -n $keypair2 ]; then
+ grep -e "^$action.*$keypair1" "$ima_policy" | \
+ grep -q -e "$keypair2"
+ else
+ grep -q -e "^$action.*$keypair1" "$ima_policy"
+ fi
+
+ # invert "grep -q" result, returning 1 for found.
+ [ $? -eq 0 ] && ret=1
+ return $ret
+}
new file mode 100755
@@ -0,0 +1,190 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+#
+# Loading a kernel image via the kexec_file_load syscall can verify either
+# the IMA signature stored in the security.ima xattr or the PE signature,
+# both signatures depending on the IMA policy, or none.
+#
+# To determine whether the kernel image is signed, this test depends
+# on pesign and getfattr. This test also requires the kernel to be
+# built with CONFIG_IKCONFIG enabled and either CONFIG_IKCONFIG_PROC
+# enabled or access to the extract-ikconfig script.
+
+TEST="KEXEC_FILE_LOAD"
+. ./kexec_common_lib.sh
+
+trap "{ rm -f $IKCONFIG ; }" EXIT
+
+# Some of the IMA builtin policies may require the kexec kernel image to
+# be signed, but these policy rules may be replaced with a custom
+# policy. Only CONFIG_IMA_APPRAISE_REQUIRE_KEXEC_SIGS persists after
+# loading a custom policy. Check if it is enabled, before reading the
+# IMA runtime sysfs policy file.
+# Return 1 for IMA signature required and 0 for not required.
+is_ima_sig_required()
+{
+ local ret=0
+
+ kconfig_enabled "CONFIG_IMA_APPRAISE_REQUIRE_KEXEC_SIGS=y" \
+ "IMA kernel image signature required"
+ if [ $? -eq 1 ]; then
+ log_info "IMA signature required"
+ return 1
+ fi
+
+ # The architecture specific or a custom policy may require the
+ # kexec kernel image be signed. Policy rules are walked
+ # sequentially. As a result, a policy rule may be defined, but
+ # might not necessarily be used. This test assumes if a policy
+ # rule is specified, that is the intent.
+ if [ $ima_read_policy -eq 1 ]; then
+ check_ima_policy "appraise" "func=KEXEC_KERNEL_CHECK" \
+ "appraise_type=imasig"
+ ret=$?
+ [ $ret -eq 1 ] && log_info "IMA signature required";
+ fi
+ return $ret
+}
+
+# The kexec_file_load_test() is complicated enough, require pesign.
+# Return 1 for PE signature found and 0 for not found.
+check_for_pesig()
+{
+ which pesign > /dev/null 2>&1 || log_skip "pesign not found"
+
+ pesign -i $KERNEL_IMAGE --show-signature | grep -q "No signatures"
+ local ret=$?
+ if [ $ret -eq 1 ]; then
+ log_info "kexec kernel image PE signed"
+ else
+ log_info "kexec kernel image not PE signed"
+ fi
+ return $ret
+}
+
+# The kexec_file_load_test() is complicated enough, require getfattr.
+# Return 1 for IMA signature found and 0 for not found.
+check_for_imasig()
+{
+ local ret=0
+
+ which getfattr > /dev/null 2>&1
+ if [ $? -eq 1 ]; then
+ log_skip "getfattr not found"
+ fi
+
+ line=$(getfattr -n security.ima -e hex --absolute-names $KERNEL_IMAGE 2>&1)
+ echo $line | grep -q "security.ima=0x03"
+ if [ $? -eq 0 ]; then
+ ret=1
+ log_info "kexec kernel image IMA signed"
+ else
+ log_info "kexec kernel image not IMA signed"
+ fi
+ return $ret
+}
+
+kexec_file_load_test()
+{
+ local succeed_msg="kexec_file_load succeeded"
+ local failed_msg="kexec_file_load failed"
+ local key_msg="try enabling the CONFIG_INTEGRITY_PLATFORM_KEYRING"
+
+ line=$(kexec --load --kexec-file-syscall $KERNEL_IMAGE 2>&1)
+
+ if [ $? -eq 0 ]; then
+ kexec --unload --kexec-file-syscall
+
+ # In secureboot mode with an architecture specific
+ # policy, make sure either an IMA or PE signature exists.
+ if [ $secureboot -eq 1 ] && [ $arch_policy -eq 1 ] && \
+ [ $ima_signed -eq 0 ] && [ $pe_signed -eq 0 ]; then
+ log_fail "$succeed_msg (missing sig)"
+ fi
+
+ if [ $pe_sig_required -eq 1 ] && [ $pe_signed -eq 0 ]; then
+ log_fail "$succeed_msg (missing PE sig)"
+ fi
+
+ if [ $ima_sig_required -eq 1 ] && [ $ima_signed -eq 0 ]; then
+ log_fail "$succeed_msg (missing IMA sig)"
+ fi
+
+ if [ $pe_sig_required -eq 0 ] && [ $ima_sig_required -eq 0 ] \
+ && [ $ima_read_policy -eq 0 ] && [ $ima_signed -eq 0 ]; then
+ log_fail "$succeed_msg (possibly missing IMA sig)"
+ fi
+
+ log_pass "$succeed_msg"
+ fi
+
+ # Check the reason for the kexec_file_load failure
+ echo $line | grep -q "Required key not available"
+ if [ $? -eq 0 ]; then
+ if [ $platform_keyring -eq 0 ]; then
+ log_pass "$failed_msg (-ENOKEY), $key_msg"
+ else
+ log_pass "$failed_msg (-ENOKEY)"
+ fi
+ fi
+
+ if [ $pe_sig_required -eq 1 ] && [ $pe_signed -eq 0 ]; then
+ log_pass "$failed_msg (missing PE sig)"
+ fi
+
+ if [ $ima_sig_required -eq 1 ] && [ $ima_signed -eq 0 ]; then
+ log_pass "$failed_msg (missing IMA sig)"
+ fi
+
+ if [ $pe_sig_required -eq 0 ] && [ $ima_sig_required -eq 0 ] \
+ && [ $ima_read_policy -eq 0 ] && [ $ima_signed -eq 0 ]; then
+ log_pass "$failed_msg (possibly missing IMA sig)"
+ fi
+
+ log_pass "$failed_msg"
+ return 0
+}
+
+# kexec requires root privileges
+require_root_privileges
+
+# get the kernel config
+get_kconfig
+
+# Determine which kernel config options are enabled
+kconfig_enabled "CONFIG_IMA_ARCH_POLICY=y" \
+ "architecture specific policy enabled"
+arch_policy=$?
+
+kconfig_enabled "CONFIG_INTEGRITY_PLATFORM_KEYRING=y" \
+ "platform keyring enabled"
+platform_keyring=$?
+
+kconfig_enabled "CONFIG_IMA_READ_POLICY=y" "reading IMA policy permitted"
+ima_read_policy=$?
+
+kconfig_enabled "CONFIG_KEXEC_BZIMAGE_VERIFY_SIG=y" \
+ "PE signed kernel image required"
+pe_sig_required=$?
+
+is_ima_sig_required
+ima_sig_required=$?
+
+get_secureboot_mode
+secureboot=$?
+
+if [ $secureboot -eq 0 ] && [ $arch_policy -eq 0 ] && \
+ [ $pe_sig_required -eq 0 ] && [ $ima_sig_required -eq 0 ] && \
+ [ $ima_read_policy -eq 1 ]; then
+ log_skip "No signature verification required"
+fi
+
+# Are there pe and ima signatures
+check_for_pesig
+pe_signed=$?
+
+check_for_imasig
+ima_signed=$?
+
+# Test loading the kernel image via kexec_file_load syscall
+kexec_file_load_test
@@ -14,7 +14,6 @@ get_secureboot_mode
secureboot=$?
# kexec_load should fail in secure boot mode
-KERNEL_IMAGE="/boot/vmlinuz-`uname -r`"
kexec --load $KERNEL_IMAGE > /dev/null 2>&1
if [ $? -eq 0 ]; then
kexec --unload