diff mbox series

[v2,1/3] selftests: netfilter: add ipvs test script

Message ID 1569565266-31566-2-git-send-email-yanhaishuang@cmss.chinamobile.com (mailing list archive)
State New
Headers show
Series selftests: netfilter: introduce test cases for ipvs | expand

Commit Message

Haishuang Yan Sept. 27, 2019, 6:21 a.m. UTC 
Test virutal server via directing routing for IPv4.

Tested:

# selftests: netfilter: ipvs.sh
# Testing DR mode...
# ipvs.sh: PASS
ok 6 selftests: netfilter: ipvs.sh

Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
---
v2: optimize test script
---
 tools/testing/selftests/netfilter/Makefile |   2 +-
 tools/testing/selftests/netfilter/ipvs.sh  | 184 +++++++++++++++++++++++++++++
 2 files changed, 185 insertions(+), 1 deletion(-)
 create mode 100755 tools/testing/selftests/netfilter/ipvs.sh

Comments

Simon Horman Oct. 1, 2019, 9:50 a.m. UTC | #1 
On Fri, Sep 27, 2019 at 02:21:04PM +0800, Haishuang Yan wrote:
> Test virutal server via directing routing for IPv4.
> 
> Tested:
> 
> # selftests: netfilter: ipvs.sh
> # Testing DR mode...
> # ipvs.sh: PASS
> ok 6 selftests: netfilter: ipvs.sh
> 
> Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
> ---
> v2: optimize test script
> ---
>  tools/testing/selftests/netfilter/Makefile |   2 +-
>  tools/testing/selftests/netfilter/ipvs.sh  | 184 +++++++++++++++++++++++++++++
>  2 files changed, 185 insertions(+), 1 deletion(-)
>  create mode 100755 tools/testing/selftests/netfilter/ipvs.sh
> 
> diff --git a/tools/testing/selftests/netfilter/Makefile b/tools/testing/selftests/netfilter/Makefile
> index 4144984..de1032b 100644
> --- a/tools/testing/selftests/netfilter/Makefile
> +++ b/tools/testing/selftests/netfilter/Makefile
> @@ -2,6 +2,6 @@
>  # Makefile for netfilter selftests
>  
>  TEST_PROGS := nft_trans_stress.sh nft_nat.sh bridge_brouter.sh \
> -	conntrack_icmp_related.sh nft_flowtable.sh
> +	conntrack_icmp_related.sh nft_flowtable.sh ipvs.sh
>  
>  include ../lib.mk
> diff --git a/tools/testing/selftests/netfilter/ipvs.sh b/tools/testing/selftests/netfilter/ipvs.sh
> new file mode 100755
> index 0000000..658c06b
> --- /dev/null
> +++ b/tools/testing/selftests/netfilter/ipvs.sh
> @@ -0,0 +1,184 @@
> +#!/bin/sh
> +# SPDX-License-Identifier: GPL-2.0
> +#
> +# End-to-end ipvs test suite
> +# Topology:
> +#--------------------------------------------------------------+
> +#                      |                                       |
> +#         ns0          |         ns1                           |
> +#      -----------     |     -----------    -----------        |
> +#      | veth01  | --------- | veth10  |    | veth12  |        |
> +#      -----------    peer   -----------    -----------        |
> +#           |          |                        |              |
> +#      -----------     |                        |              |
> +#      |  br0    |     |-----------------  peer |--------------|
> +#      -----------     |                        |              |
> +#           |          |                        |              |
> +#      ----------     peer   ----------      -----------       |
> +#      |  veth02 | --------- |  veth20 |     | veth21  |       |
> +#      ----------      |     ----------      -----------       |
> +#                      |         ns2                           |
> +#                      |                                       |
> +#--------------------------------------------------------------+
> +#
> +# We assume that all network driver are loaded
> +#
> +
> +# Kselftest framework requirement - SKIP code is 4.
> +ksft_skip=4
> +ret=0
> +GREEN='\033[0;92m'
> +RED='\033[0;31m'
> +NC='\033[0m' # No Color
> +
> +readonly port=8080
> +
> +readonly vip_v4=207.175.44.110
> +readonly cip_v4=10.0.0.2
> +readonly gip_v4=10.0.0.1
> +readonly dip_v4=172.16.0.1
> +readonly rip_v4=172.16.0.2
> +readonly sip_v4=10.0.0.3
> +
> +readonly infile="$(mktemp)"
> +readonly outfile="$(mktemp)"
> +
> +sysipvsnet=/proc/sys/net/ipv4/vs/
> +if [ ! -d /proc/sys/net/ipv4/vs/ ]; then
> +    modprobe -q ip_vs
> +    if [ $? -ne 0 ]; then
> +        echo "SKIP: Could not run test without ipvs module"
> +    	exit $ksft_skip
> +    fi
> +fi
> +
> +ip -Version > /dev/null 2>&1
> +if [ $? -ne 0 ]; then
> +	echo "SKIP: Could not run test without ip tool"
> +	exit $ksft_skip
> +fi
> +
> +ipvsadm -v > /dev/null 2>&1
> +if [ $? -ne 0 ]; then
> +	echo "SKIP: Could not run test without ipvsadm"
> +	exit $ksft_skip
> +fi
> +
> +nc --version > /dev/null 2>&1
> +if [ $? -ne 0 ]; then
> +	echo "SKIP: Could not run test without ncat"
> +	exit $ksft_skip
> +fi
> +
> +setup() {
> +    ip netns add ns0
> +    ip netns add ns1
> +    ip netns add ns2
> +
> +    ip link add veth01 netns ns0 type veth peer name veth10 netns ns1
> +    ip link add veth02 netns ns0 type veth peer name veth20 netns ns2
> +    ip link add veth12 netns ns1 type veth peer name veth21 netns ns2
> +
> +    ip netns exec ns0 ip link set veth01 up
> +    ip netns exec ns0 ip link set veth02 up
> +    ip netns exec ns0 ip link add br0 type bridge
> +    ip netns exec ns0 ip link set veth01 master br0
> +    ip netns exec ns0 ip link set veth02 master br0
> +    ip netns exec ns0 ip link set br0 up
> +    ip netns exec ns0 ip addr add ${cip_v4}/24 dev br0
> +
> +    ip netns exec ns1 ip link set lo up
> +    ip netns exec ns1 ip link set veth10 up
> +    ip netns exec ns1 ip addr add ${gip_v4}/24 dev veth10
> +    ip netns exec ns1 ip link set veth12 up
> +    ip netns exec ns1 ip addr add ${dip_v4}/24 dev veth12
> +
> +    ip netns exec ns2 ip link set lo up
> +    ip netns exec ns2 ip link set veth21 up
> +    ip netns exec ns2 ip addr add ${rip_v4}/24 dev veth21
> +    ip netns exec ns2 ip link set veth20 up
> +    ip netns exec ns2 ip addr add ${sip_v4}/24 dev veth20
> +}
> +
> +cleanup() {
> +    for i in 0 1 2
> +    do
> +	ip netns del ns$i > /dev/null 2>&1
> +    done
> +    pkill nc
> +}
> +
> +server_listen() {
> +	ip netns exec ns2 nc -l -p 8080 > "${outfile}" &
> +	server_pid=$!
> +	sleep 0.2
> +}
> +
> +client_connect() {
> +	ip netns exec ns0 timeout 2 nc -w 1 ${vip_v4} ${port} < "${infile}"
> +}
> +
> +verify_data() {
> +	wait "${server_pid}"
> +	# sha1sum returns two fields [sha1] [filepath]
> +	# convert to bash array and access first elem
> +	insum=($(sha1sum ${infile}))

When /bin/sh is dash the line above results in an error

./ipvs.sh: 125: ./ipvs.sh: Syntax error: "(" unexpected (expecting "}")

Could you work on making the script free of bashisms.
Or, if that proves to be an exceisive burden, use #!/bin/bash

Thanks!

> +	outsum=($(sha1sum ${outfile}))
> +	if [[ "${insum[0]}" != "${outsum[0]}" ]]; then
> +		echo "data mismatch"
> +		exit 1
> +	fi
> +}
> +
> +test_service() {
> +    server_listen
> +    client_connect
> +    ret=$?
> +    if [ $ret -ne 0 ]; then
> +	return $ret
> +    fi
> +    verify_data
> +}
> +
> +
> +test_dr() {
> +    ip netns exec ns0 ip route add ${vip_v4} via ${gip_v4} dev br0
> +
> +    ip netns exec ns1 sysctl -qw net.ipv4.ip_forward=1
> +    ip netns exec ns1 ipvsadm -A -t ${vip_v4}:${port} -s rr
> +    ip netns exec ns1 ipvsadm -a -t ${vip_v4}:${port} -r ${rip_v4}:${port}
> +    ip netns exec ns1 ip addr add ${vip_v4}/32 dev lo:1
> +
> +    # avoid incorrect arp response
> +    ip netns exec ns2 sysctl -qw net.ipv4.conf.all.arp_ignore=1
> +    ip netns exec ns2 sysctl -qw net.ipv4.conf.all.arp_announce=2
> +    # avoid reverse route lookup
> +    ip netns exec ns2 sysctl -qw  net.ipv4.conf.all.rp_filter=0
> +    ip netns exec ns2 sysctl -qw  net.ipv4.conf.veth21.rp_filter=0
> +    ip netns exec ns2 ip addr add ${vip_v4}/32 dev lo:1
> +
> +    test_service
> +}
> +
> +run_tests() {
> +	local errors=
> +
> +	echo "Testing DR mode..."
> +	setup
> +	test_dr
> +	errors=$(( $errors + $? ))
> +
> +	return $errors
> +}
> +
> +trap cleanup EXIT
> +
> +cleanup
> +run_tests
> +
> +if [ $? -ne 0 ]; then
> +	echo -e "$(basename $0): ${RED}FAIL${NC}"
> +	exit 1
> +fi
> +echo -e "$(basename $0): ${GREEN}PASS${NC}"
> +exit 0
> -- 
> 1.8.3.1
> 
> 
>
Duncan Roe Oct. 2, 2019, 1:15 a.m. UTC | #2 
On Tue, Oct 01, 2019 at 11:50:33AM +0200, Simon Horman wrote:
> On Fri, Sep 27, 2019 at 02:21:04PM +0800, Haishuang Yan wrote:
> > Test virutal server via directing routing for IPv4.
> >
> > Tested:
> >
> > # selftests: netfilter: ipvs.sh
> > # Testing DR mode...
> > # ipvs.sh: PASS
> > ok 6 selftests: netfilter: ipvs.sh
> >
> > Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
> > ---
> > v2: optimize test script
> > ---
> >  tools/testing/selftests/netfilter/Makefile |   2 +-
> >  tools/testing/selftests/netfilter/ipvs.sh  | 184 +++++++++++++++++++++++++++++
> >  2 files changed, 185 insertions(+), 1 deletion(-)
> >  create mode 100755 tools/testing/selftests/netfilter/ipvs.sh
> >
> > diff --git a/tools/testing/selftests/netfilter/Makefile b/tools/testing/selftests/netfilter/Makefile
> > index 4144984..de1032b 100644
> > --- a/tools/testing/selftests/netfilter/Makefile
> > +++ b/tools/testing/selftests/netfilter/Makefile
> > @@ -2,6 +2,6 @@
> >  # Makefile for netfilter selftests
> >
> >  TEST_PROGS := nft_trans_stress.sh nft_nat.sh bridge_brouter.sh \
> > -	conntrack_icmp_related.sh nft_flowtable.sh
> > +	conntrack_icmp_related.sh nft_flowtable.sh ipvs.sh
> >
> >  include ../lib.mk
> > diff --git a/tools/testing/selftests/netfilter/ipvs.sh b/tools/testing/selftests/netfilter/ipvs.sh
> > new file mode 100755
> > index 0000000..658c06b
> > --- /dev/null
> > +++ b/tools/testing/selftests/netfilter/ipvs.sh
> > @@ -0,0 +1,184 @@
> > +#!/bin/sh
> > +# SPDX-License-Identifier: GPL-2.0
> > +#
> > +# End-to-end ipvs test suite
> > +# Topology:
> > +#--------------------------------------------------------------+
> > +#                      |                                       |
> > +#         ns0          |         ns1                           |
> > +#      -----------     |     -----------    -----------        |
> > +#      | veth01  | --------- | veth10  |    | veth12  |        |
> > +#      -----------    peer   -----------    -----------        |
> > +#           |          |                        |              |
> > +#      -----------     |                        |              |
> > +#      |  br0    |     |-----------------  peer |--------------|
> > +#      -----------     |                        |              |
> > +#           |          |                        |              |
> > +#      ----------     peer   ----------      -----------       |
> > +#      |  veth02 | --------- |  veth20 |     | veth21  |       |
> > +#      ----------      |     ----------      -----------       |
> > +#                      |         ns2                           |
> > +#                      |                                       |
> > +#--------------------------------------------------------------+
> > +#
> > +# We assume that all network driver are loaded
> > +#
> > +
> > +# Kselftest framework requirement - SKIP code is 4.
> > +ksft_skip=4
> > +ret=0
> > +GREEN='\033[0;92m'
> > +RED='\033[0;31m'
> > +NC='\033[0m' # No Color
> > +
> > +readonly port=8080
> > +
> > +readonly vip_v4=207.175.44.110
> > +readonly cip_v4=10.0.0.2
> > +readonly gip_v4=10.0.0.1
> > +readonly dip_v4=172.16.0.1
> > +readonly rip_v4=172.16.0.2
> > +readonly sip_v4=10.0.0.3
> > +
> > +readonly infile="$(mktemp)"
> > +readonly outfile="$(mktemp)"
> > +
> > +sysipvsnet=/proc/sys/net/ipv4/vs/
> > +if [ ! -d /proc/sys/net/ipv4/vs/ ]; then
> > +    modprobe -q ip_vs
> > +    if [ $? -ne 0 ]; then
> > +        echo "SKIP: Could not run test without ipvs module"
> > +    	exit $ksft_skip
> > +    fi
> > +fi
> > +
> > +ip -Version > /dev/null 2>&1
> > +if [ $? -ne 0 ]; then
> > +	echo "SKIP: Could not run test without ip tool"
> > +	exit $ksft_skip
> > +fi
> > +
> > +ipvsadm -v > /dev/null 2>&1
> > +if [ $? -ne 0 ]; then
> > +	echo "SKIP: Could not run test without ipvsadm"
> > +	exit $ksft_skip
> > +fi
> > +
> > +nc --version > /dev/null 2>&1
> > +if [ $? -ne 0 ]; then
> > +	echo "SKIP: Could not run test without ncat"
> > +	exit $ksft_skip
> > +fi
> > +
> > +setup() {
> > +    ip netns add ns0
> > +    ip netns add ns1
> > +    ip netns add ns2
> > +
> > +    ip link add veth01 netns ns0 type veth peer name veth10 netns ns1
> > +    ip link add veth02 netns ns0 type veth peer name veth20 netns ns2
> > +    ip link add veth12 netns ns1 type veth peer name veth21 netns ns2
> > +
> > +    ip netns exec ns0 ip link set veth01 up
> > +    ip netns exec ns0 ip link set veth02 up
> > +    ip netns exec ns0 ip link add br0 type bridge
> > +    ip netns exec ns0 ip link set veth01 master br0
> > +    ip netns exec ns0 ip link set veth02 master br0
> > +    ip netns exec ns0 ip link set br0 up
> > +    ip netns exec ns0 ip addr add ${cip_v4}/24 dev br0
> > +
> > +    ip netns exec ns1 ip link set lo up
> > +    ip netns exec ns1 ip link set veth10 up
> > +    ip netns exec ns1 ip addr add ${gip_v4}/24 dev veth10
> > +    ip netns exec ns1 ip link set veth12 up
> > +    ip netns exec ns1 ip addr add ${dip_v4}/24 dev veth12
> > +
> > +    ip netns exec ns2 ip link set lo up
> > +    ip netns exec ns2 ip link set veth21 up
> > +    ip netns exec ns2 ip addr add ${rip_v4}/24 dev veth21
> > +    ip netns exec ns2 ip link set veth20 up
> > +    ip netns exec ns2 ip addr add ${sip_v4}/24 dev veth20
> > +}
> > +
> > +cleanup() {
> > +    for i in 0 1 2
> > +    do
> > +	ip netns del ns$i > /dev/null 2>&1
> > +    done
> > +    pkill nc
> > +}
> > +
> > +server_listen() {
> > +	ip netns exec ns2 nc -l -p 8080 > "${outfile}" &
> > +	server_pid=$!
> > +	sleep 0.2
> > +}
> > +
> > +client_connect() {
> > +	ip netns exec ns0 timeout 2 nc -w 1 ${vip_v4} ${port} < "${infile}"
> > +}
> > +
> > +verify_data() {
> > +	wait "${server_pid}"
> > +	# sha1sum returns two fields [sha1] [filepath]
> > +	# convert to bash array and access first elem
> > +	insum=($(sha1sum ${infile}))
>
> When /bin/sh is dash the line above results in an error
>
> ./ipvs.sh: 125: ./ipvs.sh: Syntax error: "(" unexpected (expecting "}")
>
> Could you work on making the script free of bashisms.
> Or, if that proves to be an exceisive burden, use #!/bin/bash

Better use #!/bin/bash -p, to prevent bash using functions from the environment

Cheers ... Duncan.
>
> Thanks!
>
> > +	outsum=($(sha1sum ${outfile}))
> > +	if [[ "${insum[0]}" != "${outsum[0]}" ]]; then
> > +		echo "data mismatch"
> > +		exit 1
> > +	fi
> > +}
> > +
> > +test_service() {
> > +    server_listen
> > +    client_connect
> > +    ret=$?
> > +    if [ $ret -ne 0 ]; then
> > +	return $ret
> > +    fi
> > +    verify_data
> > +}
> > +
> > +
> > +test_dr() {
> > +    ip netns exec ns0 ip route add ${vip_v4} via ${gip_v4} dev br0
> > +
> > +    ip netns exec ns1 sysctl -qw net.ipv4.ip_forward=1
> > +    ip netns exec ns1 ipvsadm -A -t ${vip_v4}:${port} -s rr
> > +    ip netns exec ns1 ipvsadm -a -t ${vip_v4}:${port} -r ${rip_v4}:${port}
> > +    ip netns exec ns1 ip addr add ${vip_v4}/32 dev lo:1
> > +
> > +    # avoid incorrect arp response
> > +    ip netns exec ns2 sysctl -qw net.ipv4.conf.all.arp_ignore=1
> > +    ip netns exec ns2 sysctl -qw net.ipv4.conf.all.arp_announce=2
> > +    # avoid reverse route lookup
> > +    ip netns exec ns2 sysctl -qw  net.ipv4.conf.all.rp_filter=0
> > +    ip netns exec ns2 sysctl -qw  net.ipv4.conf.veth21.rp_filter=0
> > +    ip netns exec ns2 ip addr add ${vip_v4}/32 dev lo:1
> > +
> > +    test_service
> > +}
> > +
> > +run_tests() {
> > +	local errors=
> > +
> > +	echo "Testing DR mode..."
> > +	setup
> > +	test_dr
> > +	errors=$(( $errors + $? ))
> > +
> > +	return $errors
> > +}
> > +
> > +trap cleanup EXIT
> > +
> > +cleanup
> > +run_tests
> > +
> > +if [ $? -ne 0 ]; then
> > +	echo -e "$(basename $0): ${RED}FAIL${NC}"
> > +	exit 1
> > +fi
> > +echo -e "$(basename $0): ${GREEN}PASS${NC}"
> > +exit 0
> > --
> > 1.8.3.1
> >
> >
> >
diff mbox series

Patch

diff --git a/tools/testing/selftests/netfilter/Makefile b/tools/testing/selftests/netfilter/Makefile
index 4144984..de1032b 100644
--- a/tools/testing/selftests/netfilter/Makefile
+++ b/tools/testing/selftests/netfilter/Makefile
@@ -2,6 +2,6 @@ 
 # Makefile for netfilter selftests
 
 TEST_PROGS := nft_trans_stress.sh nft_nat.sh bridge_brouter.sh \
-	conntrack_icmp_related.sh nft_flowtable.sh
+	conntrack_icmp_related.sh nft_flowtable.sh ipvs.sh
 
 include ../lib.mk
diff --git a/tools/testing/selftests/netfilter/ipvs.sh b/tools/testing/selftests/netfilter/ipvs.sh
new file mode 100755
index 0000000..658c06b
--- /dev/null
+++ b/tools/testing/selftests/netfilter/ipvs.sh
@@ -0,0 +1,184 @@ 
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+#
+# End-to-end ipvs test suite
+# Topology:
+#--------------------------------------------------------------+
+#                      |                                       |
+#         ns0          |         ns1                           |
+#      -----------     |     -----------    -----------        |
+#      | veth01  | --------- | veth10  |    | veth12  |        |
+#      -----------    peer   -----------    -----------        |
+#           |          |                        |              |
+#      -----------     |                        |              |
+#      |  br0    |     |-----------------  peer |--------------|
+#      -----------     |                        |              |
+#           |          |                        |              |
+#      ----------     peer   ----------      -----------       |
+#      |  veth02 | --------- |  veth20 |     | veth21  |       |
+#      ----------      |     ----------      -----------       |
+#                      |         ns2                           |
+#                      |                                       |
+#--------------------------------------------------------------+
+#
+# We assume that all network driver are loaded
+#
+
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+ret=0
+GREEN='\033[0;92m'
+RED='\033[0;31m'
+NC='\033[0m' # No Color
+
+readonly port=8080
+
+readonly vip_v4=207.175.44.110
+readonly cip_v4=10.0.0.2
+readonly gip_v4=10.0.0.1
+readonly dip_v4=172.16.0.1
+readonly rip_v4=172.16.0.2
+readonly sip_v4=10.0.0.3
+
+readonly infile="$(mktemp)"
+readonly outfile="$(mktemp)"
+
+sysipvsnet=/proc/sys/net/ipv4/vs/
+if [ ! -d /proc/sys/net/ipv4/vs/ ]; then
+    modprobe -q ip_vs
+    if [ $? -ne 0 ]; then
+        echo "SKIP: Could not run test without ipvs module"
+    	exit $ksft_skip
+    fi
+fi
+
+ip -Version > /dev/null 2>&1
+if [ $? -ne 0 ]; then
+	echo "SKIP: Could not run test without ip tool"
+	exit $ksft_skip
+fi
+
+ipvsadm -v > /dev/null 2>&1
+if [ $? -ne 0 ]; then
+	echo "SKIP: Could not run test without ipvsadm"
+	exit $ksft_skip
+fi
+
+nc --version > /dev/null 2>&1
+if [ $? -ne 0 ]; then
+	echo "SKIP: Could not run test without ncat"
+	exit $ksft_skip
+fi
+
+setup() {
+    ip netns add ns0
+    ip netns add ns1
+    ip netns add ns2
+
+    ip link add veth01 netns ns0 type veth peer name veth10 netns ns1
+    ip link add veth02 netns ns0 type veth peer name veth20 netns ns2
+    ip link add veth12 netns ns1 type veth peer name veth21 netns ns2
+
+    ip netns exec ns0 ip link set veth01 up
+    ip netns exec ns0 ip link set veth02 up
+    ip netns exec ns0 ip link add br0 type bridge
+    ip netns exec ns0 ip link set veth01 master br0
+    ip netns exec ns0 ip link set veth02 master br0
+    ip netns exec ns0 ip link set br0 up
+    ip netns exec ns0 ip addr add ${cip_v4}/24 dev br0
+
+    ip netns exec ns1 ip link set lo up
+    ip netns exec ns1 ip link set veth10 up
+    ip netns exec ns1 ip addr add ${gip_v4}/24 dev veth10
+    ip netns exec ns1 ip link set veth12 up
+    ip netns exec ns1 ip addr add ${dip_v4}/24 dev veth12
+
+    ip netns exec ns2 ip link set lo up
+    ip netns exec ns2 ip link set veth21 up
+    ip netns exec ns2 ip addr add ${rip_v4}/24 dev veth21
+    ip netns exec ns2 ip link set veth20 up
+    ip netns exec ns2 ip addr add ${sip_v4}/24 dev veth20
+}
+
+cleanup() {
+    for i in 0 1 2
+    do
+	ip netns del ns$i > /dev/null 2>&1
+    done
+    pkill nc
+}
+
+server_listen() {
+	ip netns exec ns2 nc -l -p 8080 > "${outfile}" &
+	server_pid=$!
+	sleep 0.2
+}
+
+client_connect() {
+	ip netns exec ns0 timeout 2 nc -w 1 ${vip_v4} ${port} < "${infile}"
+}
+
+verify_data() {
+	wait "${server_pid}"
+	# sha1sum returns two fields [sha1] [filepath]
+	# convert to bash array and access first elem
+	insum=($(sha1sum ${infile}))
+	outsum=($(sha1sum ${outfile}))
+	if [[ "${insum[0]}" != "${outsum[0]}" ]]; then
+		echo "data mismatch"
+		exit 1
+	fi
+}
+
+test_service() {
+    server_listen
+    client_connect
+    ret=$?
+    if [ $ret -ne 0 ]; then
+	return $ret
+    fi
+    verify_data
+}
+
+
+test_dr() {
+    ip netns exec ns0 ip route add ${vip_v4} via ${gip_v4} dev br0
+
+    ip netns exec ns1 sysctl -qw net.ipv4.ip_forward=1
+    ip netns exec ns1 ipvsadm -A -t ${vip_v4}:${port} -s rr
+    ip netns exec ns1 ipvsadm -a -t ${vip_v4}:${port} -r ${rip_v4}:${port}
+    ip netns exec ns1 ip addr add ${vip_v4}/32 dev lo:1
+
+    # avoid incorrect arp response
+    ip netns exec ns2 sysctl -qw net.ipv4.conf.all.arp_ignore=1
+    ip netns exec ns2 sysctl -qw net.ipv4.conf.all.arp_announce=2
+    # avoid reverse route lookup
+    ip netns exec ns2 sysctl -qw  net.ipv4.conf.all.rp_filter=0
+    ip netns exec ns2 sysctl -qw  net.ipv4.conf.veth21.rp_filter=0
+    ip netns exec ns2 ip addr add ${vip_v4}/32 dev lo:1
+
+    test_service
+}
+
+run_tests() {
+	local errors=
+
+	echo "Testing DR mode..."
+	setup
+	test_dr
+	errors=$(( $errors + $? ))
+
+	return $errors
+}
+
+trap cleanup EXIT
+
+cleanup
+run_tests
+
+if [ $? -ne 0 ]; then
+	echo -e "$(basename $0): ${RED}FAIL${NC}"
+	exit 1
+fi
+echo -e "$(basename $0): ${GREEN}PASS${NC}"
+exit 0