| Message ID | 20200414212208.21667-1-skhan@linuxfoundation.org (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | selftests: add build/cross-build dependency check script | expand |
Hi, On 4/14/20 2:22 PM, Shuah Khan wrote: > -CFLAGS += -O2 -g -std=gnu99 -Wall -I../../../../usr/include/ $(MOUNT_CFLAGS) > -LDLIBS += $(MOUNT_LDLIBS) > +CFLAGS += -O2 -g -std=gnu99 -Wall -I../../../../usr/include/ $(VAR_CFLAGS) > +LDLIBS += $(VAR_LDLIBS) (1) Can that series of ../../../.. be replaced by $(objtree)? If so, that would be much cleaner IMO. (2) I can't find anything that checks that ../../../../usr/include exists (or has been installed via 'make headers_install'). Or anything that requires that CONFIG_HEADERS_INSTALL be set/enabled. Well, other than a Makefile error, but that's not a nice way to find out. Preferably we would have some Kconfig check/enforcement or at least some documentation. Thoughts? thanks.
On 4/23/20 9:25 PM, Randy Dunlap wrote: > Hi, > > On 4/14/20 2:22 PM, Shuah Khan wrote: >> -CFLAGS += -O2 -g -std=gnu99 -Wall -I../../../../usr/include/ $(MOUNT_CFLAGS) >> -LDLIBS += $(MOUNT_LDLIBS) >> +CFLAGS += -O2 -g -std=gnu99 -Wall -I../../../../usr/include/ $(VAR_CFLAGS) >> +LDLIBS += $(VAR_LDLIBS) > > > (1) Can that series of ../../../.. be replaced by $(objtree)? > If so, that would be much cleaner IMO. > Agreed. It can be done in a separate patch. We have other tests that do similar hard coded header paths. > (2) I can't find anything that checks that ../../../../usr/include exists > (or has been installed via 'make headers_install'). Or anything that > requires that CONFIG_HEADERS_INSTALL be set/enabled. Well, other than > a Makefile error, but that's not a nice way to find out. > At the moment no. When this Makefile is fixed, that is another check to add. It is addressed by headers install during selftest make. Headers are installed as part of selftests make since selftests are often dependent on recent headers and headers install is a necessary step. You are right. There are several tests that need cleanup for such hard coded values and this dependency check script in this patch currently does libs check. My plan is to extend this to check for headers installed or not and flag headers as missing dependency. I can do that in my next version of this dependency check script. thanks, -- Shuah
> -----Original Message----- > From: linux-kselftest-owner@vger.kernel.org <linux-kselftest-owner@vger.kernel.org> On Behalf Of Randy Dunlap > > On 4/14/20 2:22 PM, Shuah Khan wrote: > > -CFLAGS += -O2 -g -std=gnu99 -Wall -I../../../../usr/include/ $(MOUNT_CFLAGS) > > -LDLIBS += $(MOUNT_LDLIBS) > > +CFLAGS += -O2 -g -std=gnu99 -Wall -I../../../../usr/include/ $(VAR_CFLAGS) > > +LDLIBS += $(VAR_LDLIBS) > > > (1) Can that series of ../../../.. be replaced by $(objtree)? > If so, that would be much cleaner IMO. kselftests doesn't set $(objtree) when it is run directly (ie make -C tools/testing/selftests) I had my own solution which was to use KBUILD_OUTPUT, like so: This was a patch in my queue, that I didn't send in because I wasn't very happy with it. I was still considering alternatives. ---------------- (patch) Subject: [PATCH] selftests/vm: use includes from KBUILD_OUTPUT directory The Makefile for the vm tests was specifying a relative path (in the source directory) for accessing include files. This doesn't work when the headers files are placed in another directory (with O= or KBUILD_OUTPUT). It may appear to work, but ends up using includes from the host machine, which may not match the kernel source being compiled against. Without this change, when the program userfaultfd.c was compiled, it generated errors like the following: userfaultfd.c:267:21: error: 'UFFD_API_RANGE_IOCTLS_BASIC' undeclared here (not in a function) .expected_ioctls = UFFD_API_RANGE_IOCTLS_BASIC, ^~~~~~~~~~~~~~~~~~~~~~~~~~~ userfaultfd.c: In function 'uffd_poll_thread': userfaultfd.c:529:8: error: 'UFFD_EVENT_FORK' undeclared (first use in this function) case UFFD_EVENT_FORK: ^~~~~~~~~~~~~~~ userfaultfd.c:529:8: note: each undeclared identifier is reported only once for each function it appears in userfaultfd.c:531:18: error: 'union <anonymous>' has no member named 'fork' uffd = msg.arg.fork.ufd; ^ Change the CFLAGS definition in the Makefile to reference KBUILD_OUTPUT. Signed-off-by: Tim Bird <tim.bird@sony.com> --- tools/testing/selftests/vm/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/vm/Makefile b/tools/testing/selftests/vm/Makefile index 7f9a8a8..0208659 100644 --- a/tools/testing/selftests/vm/Makefile +++ b/tools/testing/selftests/vm/Makefile @@ -3,7 +3,7 @@ uname_M := $(shell uname -m 2>/dev/null || echo not) ARCH ?= $(shell echo $(uname_M) | sed -e 's/aarch64.*/arm64/') -CFLAGS = -Wall -I ../../../../usr/include $(EXTRA_CFLAGS) +CFLAGS = -Wall -I $(KBUILD_OUTPUT)/usr/include $(EXTRA_CFLAGS) LDLIBS = -lrt TEST_GEN_FILES = compaction_test TEST_GEN_FILES += gup_benchmark
On 4/24/20 11:28 AM, Bird, Tim wrote: >> -----Original Message----- >> From: linux-kselftest-owner@vger.kernel.org <linux-kselftest-owner@vger.kernel.org> On Behalf Of Randy Dunlap >> >> On 4/14/20 2:22 PM, Shuah Khan wrote: >>> -CFLAGS += -O2 -g -std=gnu99 -Wall -I../../../../usr/include/ $(MOUNT_CFLAGS) >>> -LDLIBS += $(MOUNT_LDLIBS) >>> +CFLAGS += -O2 -g -std=gnu99 -Wall -I../../../../usr/include/ $(VAR_CFLAGS) >>> +LDLIBS += $(VAR_LDLIBS) >> >> >> (1) Can that series of ../../../.. be replaced by $(objtree)? >> If so, that would be much cleaner IMO. > > kselftests doesn't set $(objtree) when it is run directly > (ie make -C tools/testing/selftests) > > I had my own solution which was to use KBUILD_OUTPUT, like so: > This was a patch in my queue, that I didn't send in because I wasn't > very happy with it. I was still considering alternatives. > > ---------------- (patch) > Subject: [PATCH] selftests/vm: use includes from KBUILD_OUTPUT directory > > The Makefile for the vm tests was specifying a relative path > (in the source directory) for accessing include files. This > doesn't work when the headers files are placed in another > directory (with O= or KBUILD_OUTPUT). It may appear to work, > but ends up using includes from the host machine, which may > not match the kernel source being compiled against. > > Without this change, when the program userfaultfd.c was > compiled, it generated errors like the following: > > userfaultfd.c:267:21: error: 'UFFD_API_RANGE_IOCTLS_BASIC' undeclared > here (not in a function) > .expected_ioctls = UFFD_API_RANGE_IOCTLS_BASIC, > ^~~~~~~~~~~~~~~~~~~~~~~~~~~ > userfaultfd.c: In function 'uffd_poll_thread': > userfaultfd.c:529:8: error: 'UFFD_EVENT_FORK' undeclared (first use in > this function) > case UFFD_EVENT_FORK: > ^~~~~~~~~~~~~~~ > userfaultfd.c:529:8: note: each undeclared identifier is reported only > once for each function it appears in > userfaultfd.c:531:18: error: 'union <anonymous>' has no member named > 'fork' > uffd = msg.arg.fork.ufd; > ^ > > Change the CFLAGS definition in the Makefile to reference > KBUILD_OUTPUT. > > Signed-off-by: Tim Bird <tim.bird@sony.com> > --- > tools/testing/selftests/vm/Makefile | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/tools/testing/selftests/vm/Makefile b/tools/testing/selftests/vm/Makefile > index 7f9a8a8..0208659 100644 > --- a/tools/testing/selftests/vm/Makefile > +++ b/tools/testing/selftests/vm/Makefile > @@ -3,7 +3,7 @@ > uname_M := $(shell uname -m 2>/dev/null || echo not) > ARCH ?= $(shell echo $(uname_M) | sed -e 's/aarch64.*/arm64/') > > -CFLAGS = -Wall -I ../../../../usr/include $(EXTRA_CFLAGS) > +CFLAGS = -Wall -I $(KBUILD_OUTPUT)/usr/include $(EXTRA_CFLAGS) > LDLIBS = -lrt > TEST_GEN_FILES = compaction_test > TEST_GEN_FILES += gup_benchmark > This should be $(OUTPUT) instead of $(KBUILD_OUTPUT). OUTPUT is set by selftests Makefile and lib.mk which is common for all tests even when make -C is used for compile. Using KBUILD_OUTPUT will break other use-cases. Send me the patch when you are ready. kselftest Makefile invokes headers_install from the main Makefile. This sequence doesn't install headers again when kselftest make is done: Main directory: # make headers_install [headers_install runs] # make headers_install INSTALL ./usr/include [does nothing - headers are there] make kselftest-all make --no-builtin-rules ARCH=x86 -C ../../.. headers_install make[2]: Entering directory '/home/shuah/lkml/linux_5.7' INSTALL ./usr/include [Same here - headers aren't installed] I didn't check O= and KBUILD_OUTPUT cases though. thanks, -- Shuah
diff --git a/tools/testing/selftests/gpio/Makefile b/tools/testing/selftests/gpio/Makefile index 0bb80619db58..32bdc978a711 100644 --- a/tools/testing/selftests/gpio/Makefile +++ b/tools/testing/selftests/gpio/Makefile @@ -1,13 +1,13 @@ # SPDX-License-Identifier: GPL-2.0 -MOUNT_CFLAGS := $(shell pkg-config --cflags mount 2>/dev/null) -MOUNT_LDLIBS := $(shell pkg-config --libs mount 2>/dev/null) -ifeq ($(MOUNT_LDLIBS),) -MOUNT_LDLIBS := -lmount -I/usr/include/libmount +VAR_CFLAGS := $(shell pkg-config --cflags mount 2>/dev/null) +VAR_LDLIBS := $(shell pkg-config --libs mount 2>/dev/null) +ifeq ($(VAR_LDLIBS),) +VAR_LDLIBS := -lmount -I/usr/include/libmount endif -CFLAGS += -O2 -g -std=gnu99 -Wall -I../../../../usr/include/ $(MOUNT_CFLAGS) -LDLIBS += $(MOUNT_LDLIBS) +CFLAGS += -O2 -g -std=gnu99 -Wall -I../../../../usr/include/ $(VAR_CFLAGS) +LDLIBS += $(VAR_LDLIBS) TEST_PROGS := gpio-mockup.sh TEST_FILES := gpio-mockup-sysfs.sh diff --git a/tools/testing/selftests/intel_pstate/Makefile b/tools/testing/selftests/intel_pstate/Makefile index 7340fd6a9a9f..39f0fa2a8fd6 100644 --- a/tools/testing/selftests/intel_pstate/Makefile +++ b/tools/testing/selftests/intel_pstate/Makefile @@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 CFLAGS := $(CFLAGS) -Wall -D_GNU_SOURCE -LDLIBS := $(LDLIBS) -lm +LDLIBS += -lm uname_M := $(shell uname -m 2>/dev/null || echo not) ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/x86/ -e s/x86_64/x86/) diff --git a/tools/testing/selftests/kselftest_deps.sh b/tools/testing/selftests/kselftest_deps.sh new file mode 100755 index 000000000000..bb9c22e7af0e --- /dev/null +++ b/tools/testing/selftests/kselftest_deps.sh @@ -0,0 +1,272 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# kselftest_deps.sh +# +# Checks for kselftest build dependencies on the build system. +# Copyright (c) 2020 Shuah Khan <skhan@linuxfoundation.org> +# +# + +usage() +{ + +echo -e "Usage: $0 -[p] <compiler> [test_name]\n" +echo -e "\tkselftest_deps.sh [-p] gcc" +echo -e "\tkselftest_deps.sh [-p] gcc vm" +echo -e "\tkselftest_deps.sh [-p] aarch64-linux-gnu-gcc" +echo -e "\tkselftest_deps.sh [-p] aarch64-linux-gnu-gcc vm\n" +echo "- Should be run in selftests directory in the kernel repo." +echo "- Checks if Kselftests can be built/cross-built on a system." +echo "- Parses all test/sub-test Makefile to find library dependencies." +echo "- Runs compile test on a trivial C file with LDLIBS specified" +echo " in the test Makefiles to identify missing library dependencies." +echo "- Prints suggested target list for a system filtering out tests" +echo " failed the build dependency check from the TARGETS in Selftests" +echo " main Makefile when optional -p is specified." +echo "- Prints pass/fail dependency check for each tests/sub-test." +echo "- Prints pass/fail targets and libraries." +echo "- Default: runs dependency checks on all tests." +echo "- Optional test name can be specified to check dependencies for it." +exit 1 + +} + +# Start main() +main() +{ + +base_dir=`pwd` +# Make sure we're in the selftests top-level directory. +if [ $(basename "$base_dir") != "selftests" ]; then + echo -e "\tPlease run $0 in" + echo -e "\ttools/testing/selftests directory ..." + exit 1 +fi + +print_targets=0 + +while getopts "p" arg; do + case $arg in + p) + print_targets=1 + shift;; + esac +done + +if [ $# -eq 0 ] +then + usage +fi + +# Compiler +CC=$1 + +tmp_file=$(mktemp).c +trap "rm -f $tmp_file.o $tmp_file $tmp_file.bin" EXIT +#echo $tmp_file + +pass=$(mktemp).out +trap "rm -f $pass" EXIT +#echo $pass + +fail=$(mktemp).out +trap "rm -f $fail" EXIT +#echo $fail + +# Generate tmp source fire for compile test +cat << "EOF" > $tmp_file +int main() +{ +} +EOF + +# Save results +total_cnt=0 +fail_trgts=() +fail_libs=() +fail_cnt=0 +pass_trgts=() +pass_libs=() +pass_cnt=0 + +# Get all TARGETS from selftests Makefile +targets=$(egrep "^TARGETS +|^TARGETS =" Makefile | cut -d "=" -f2) + +# Single test case +if [ $# -eq 2 ] +then + test=$2/Makefile + + l1_test $test + l2_test $test + l3_test $test + + print_results $1 $2 + exit $? +fi + +# Level 1: LDLIBS set static. +# +# Find all LDLIBS set statically for all executables built by a Makefile +# and filter out VAR_LDLIBS to discard the following: +# gpio/Makefile:LDLIBS += $(VAR_LDLIBS) +# Append space at the end of the list to append more tests. + +l1_tests=$(grep -r --include=Makefile "^LDLIBS" | \ + grep -v "VAR_LDLIBS" | awk -F: '{print $1}') + +# Level 2: LDLIBS set dynamically. +# +# Level 2 +# Some tests have multiple valid LDLIBS lines for individual sub-tests +# that need dependency checks. Find them and append them to the tests +# e.g: vm/Makefile:$(OUTPUT)/userfaultfd: LDLIBS += -lpthread +# Filter out VAR_LDLIBS to discard the following: +# memfd/Makefile:$(OUTPUT)/fuse_mnt: LDLIBS += $(VAR_LDLIBS) +# Append space at the end of the list to append more tests. + +l2_tests=$(grep -r --include=Makefile ": LDLIBS" | \ + grep -v "VAR_LDLIBS" | awk -F: '{print $1}') + +# Level 3 +# gpio, memfd and others use pkg-config to find mount and fuse libs +# respectively and save it in VAR_LDLIBS. If pkg-config doesn't find +# any, VAR_LDLIBS set to default. +# Use the default value and filter out pkg-config for dependency check. +# e.g: +# gpio/Makefile +# VAR_LDLIBS := $(shell pkg-config --libs mount) 2>/dev/null) +# memfd/Makefile +# VAR_LDLIBS := $(shell pkg-config fuse --libs 2>/dev/null) + +l3_tests=$(grep -r --include=Makefile "^VAR_LDLIBS" | \ + grep -v "pkg-config" | awk -F: '{print $1}') + +#echo $l1_tests +#echo $l2_1_tests +#echo $l3_tests + +all_tests +print_results $1 $2 + +exit $? +} +# end main() + +all_tests() +{ + for test in $l1_tests; do + l1_test $test + done + + for test in $l2_tests; do + l2_test $test + done + + for test in $l3_tests; do + l3_test $test + done +} + +# Use same parsing used for l1_tests and pick libraries this time. +l1_test() +{ + test_libs=$(grep --include=Makefile "^LDLIBS" $test | \ + grep -v "VAR_LDLIBS" | \ + sed -e 's/\:/ /' | \ + sed -e 's/+/ /' | cut -d "=" -f 2) + + check_libs $test $test_libs +} + +# Use same parsing used for l2__tests and pick libraries this time. +l2_test() +{ + test_libs=$(grep --include=Makefile ": LDLIBS" $test | \ + grep -v "VAR_LDLIBS" | \ + sed -e 's/\:/ /' | sed -e 's/+/ /' | \ + cut -d "=" -f 2) + + check_libs $test $test_libs +} + +l3_test() +{ + test_libs=$(grep --include=Makefile "^VAR_LDLIBS" $test | \ + grep -v "pkg-config" | sed -e 's/\:/ /' | + sed -e 's/+/ /' | cut -d "=" -f 2) + + check_libs $test $test_libs +} + +check_libs() +{ + +if [[ ! -z "${test_libs// }" ]] +then + + #echo $test_libs + + for lib in $test_libs; do + + let total_cnt+=1 + $CC -o $tmp_file.bin $lib $tmp_file > /dev/null 2>&1 + if [ $? -ne 0 ]; then + echo "FAIL: $test dependency check: $lib" >> $fail + let fail_cnt+=1 + fail_libs+="$lib " + fail_target=$(echo "$test" | cut -d "/" -f1) + fail_trgts+="$fail_target " + targets=$(echo "$targets" | grep -v "$fail_target") + else + echo "PASS: $test dependency check passed $lib" >> $pass + let pass_cnt+=1 + pass_libs+="$lib " + pass_trgts+="$(echo "$test" | cut -d "/" -f1) " + fi + + done +fi +} + +print_results() +{ + echo -e "========================================================"; + echo -e "Kselftest Dependency Check for [$0 $1 $2] results..." + + if [ $print_targets -ne 0 ] + then + echo -e "Suggested Selftest Targets for your configuration:" + echo -e "$targets"; + fi + + echo -e "========================================================"; + echo -e "Checked tests defining LDLIBS dependencies" + echo -e "--------------------------------------------------------"; + echo -e "Total tests with Dependencies:" + echo -e "$total_cnt Pass: $pass_cnt Fail: $fail_cnt"; + + if [ $pass_cnt -ne 0 ]; then + echo -e "--------------------------------------------------------"; + cat $pass + echo -e "--------------------------------------------------------"; + echo -e "Targets passed build dependency check on system:" + echo -e "$(echo "$pass_trgts" | xargs -n1 | sort -u | xargs)" + fi + + if [ $fail_cnt -ne 0 ]; then + echo -e "--------------------------------------------------------"; + cat $fail + echo -e "--------------------------------------------------------"; + echo -e "Targets failed build dependency check on system:" + echo -e "$(echo "$fail_trgts" | xargs -n1 | sort -u | xargs)" + echo -e "--------------------------------------------------------"; + echo -e "Missing libraries system" + echo -e "$(echo "$fail_libs" | xargs -n1 | sort -u | xargs)" + fi + + echo -e "--------------------------------------------------------"; + echo -e "========================================================"; +} + +main "$@" diff --git a/tools/testing/selftests/memfd/Makefile b/tools/testing/selftests/memfd/Makefile index 187b14cad00c..4da8b565fa32 100644 --- a/tools/testing/selftests/memfd/Makefile +++ b/tools/testing/selftests/memfd/Makefile @@ -8,11 +8,21 @@ TEST_GEN_PROGS := memfd_test TEST_PROGS := run_fuse_test.sh run_hugetlbfs_test.sh TEST_GEN_FILES := fuse_test fuse_mnt -fuse_mnt.o: CFLAGS += $(shell pkg-config fuse --cflags) +VAR_CFLAGS := $(shell pkg-config fuse --cflags 2>/dev/null) +ifeq ($(VAR_CFLAGS),) +VAR_CFLAGS := -D_FILE_OFFSET_BITS=64 -I/usr/include/fuse +endif + +VAR_LDLIBS := $(shell pkg-config fuse --libs 2>/dev/null) +ifeq ($(VAR_LDLIBS),) +VAR_LDLIBS := -lfuse -pthread +endif + +fuse_mnt.o: CFLAGS += $(VAR_CFLAGS) include ../lib.mk -$(OUTPUT)/fuse_mnt: LDLIBS += $(shell pkg-config fuse --libs) +$(OUTPUT)/fuse_mnt: LDLIBS += $(VAR_LDLIBS) $(OUTPUT)/memfd_test: memfd_test.c common.c $(OUTPUT)/fuse_test: fuse_test.c common.c
Add build/cross-build dependency check script kselftest_deps.sh This script does the following: Usage: ./kselftest_deps.sh -[p] <compiler> [test_name] kselftest_deps.sh [-p] gcc kselftest_deps.sh [-p] gcc vm kselftest_deps.sh [-p] aarch64-linux-gnu-gcc kselftest_deps.sh [-p] aarch64-linux-gnu-gcc vm - Should be run in selftests directory in the kernel repo. - Checks if Kselftests can be built/cross-built on a system. - Parses all test/sub-test Makefile to find library dependencies. - Runs compile test on a trivial C file with LDLIBS specified in the test Makefiles to identify missing library dependencies. - Prints suggested target list for a system filtering out tests failed the build dependency check from the TARGETS in Selftests the main Makefile when optional -p is specified. - Prints pass/fail dependency check for each tests/sub-test. - Prints pass/fail targets and libraries. - Default: runs dependency checks on all tests. - Optional test name can be specified to check dependencies for it. To make LDLIBS parsing easier - change gpio and memfd Makefiles to use the same temporary variable used to find and add libraries to LDLIBS. - simlify LDLIBS append logic in intel_pstate/Makefile. Results from run on x86_64 system (trimmed detailed pass/fail list): ======================================================== Kselftest Dependency Check for [./kselftest_deps.sh gcc ] results... ======================================================== Checked tests defining LDLIBS dependencies -------------------------------------------------------- Total tests with Dependencies: 55 Pass: 53 Fail: 2 -------------------------------------------------------- Targets passed build dependency check on system: bpf capabilities filesystems futex gpio intel_pstate membarrier memfd mqueue net powerpc ptp rseq rtc safesetid timens timers vDSO vm -------------------------------------------------------- FAIL: netfilter/Makefile dependency check: -lmnl FAIL: gpio/Makefile dependency check: -lmount -------------------------------------------------------- Targets failed build dependency check on system: gpio netfilter -------------------------------------------------------- Missing libraries system -lmnl -lmount -------------------------------------------------------- ======================================================== Results from run on x86_64 system with aarch64-linux-gnu-gcc: (trimmed detailed pass/fail list): ======================================================== Kselftest Dependency Check for [./kselftest_deps.sh aarch64-linux-gnu-gcc ] results... ======================================================== Checked tests defining LDLIBS dependencies -------------------------------------------------------- Total tests with Dependencies: 55 Pass: 41 Fail: 14 -------------------------------------------------------- Targets failed build dependency check on system: bpf capabilities filesystems futex gpio intel_pstate membarrier memfd mqueue net powerpc ptp rseq rtc timens timers vDSO vm -------------------------------------------------------- -------------------------------------------------------- Targets failed build dependency check on system: bpf capabilities gpio memfd mqueue net netfilter safesetid vm -------------------------------------------------------- Missing libraries system -lcap -lcap-ng -lelf -lfuse -lmnl -lmount -lnuma -lpopt -lz -------------------------------------------------------- ======================================================== Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> --- tools/testing/selftests/gpio/Makefile | 12 +- tools/testing/selftests/intel_pstate/Makefile | 2 +- tools/testing/selftests/kselftest_deps.sh | 272 ++++++++++++++++++ tools/testing/selftests/memfd/Makefile | 14 +- 4 files changed, 291 insertions(+), 9 deletions(-) create mode 100755 tools/testing/selftests/kselftest_deps.sh