@@ -3,7 +3,7 @@
#
# Test for cpuset v2 partition root state (PRS)
#
-# The sched verbose flag is set, if available, so that the console log
+# The sched verbose flag can be optionally set so that the console log
# can be examined for the correct setting of scheduling domain.
#
@@ -22,27 +22,27 @@ WAIT_INOTIFY=$(cd $(dirname $0); pwd)/wait_inotify
# Find cgroup v2 mount point
CGROUP2=$(mount -t cgroup2 | head -1 | awk -e '{print $3}')
[[ -n "$CGROUP2" ]] || skip_test "Cgroup v2 mount point not found!"
+SUBPARTS_CPUS=$CGROUP2/.__DEBUG__.cpuset.cpus.subpartitions
+CPULIST=$(cat $CGROUP2/cpuset.cpus.effective)
-CPUS=$(lscpu | grep "^CPU(s):" | sed -e "s/.*:[[:space:]]*//")
-[[ $CPUS -lt 8 ]] && skip_test "Test needs at least 8 cpus available!"
+NR_CPUS=$(lscpu | grep "^CPU(s):" | sed -e "s/.*:[[:space:]]*//")
+[[ $NR_CPUS -lt 8 ]] && skip_test "Test needs at least 8 cpus available!"
# Set verbose flag and delay factor
PROG=$1
-VERBOSE=
+VERBOSE=0
DELAY_FACTOR=1
SCHED_DEBUG=
while [[ "$1" = -* ]]
do
case "$1" in
- -v) VERBOSE=1
+ -v) ((VERBOSE++))
# Enable sched/verbose can slow thing down
[[ $DELAY_FACTOR -eq 1 ]] &&
DELAY_FACTOR=2
- break
;;
-d) DELAY_FACTOR=$2
shift
- break
;;
*) echo "Usage: $PROG [-v] [-d <delay-factor>"
exit
@@ -52,7 +52,7 @@ do
done
# Set sched verbose flag if available when "-v" option is specified
-if [[ -n "$VERBOSE" && -d /sys/kernel/debug/sched ]]
+if [[ $VERBOSE -gt 0 && -d /sys/kernel/debug/sched ]]
then
# Used to restore the original setting during cleanup
SCHED_DEBUG=$(cat /sys/kernel/debug/sched/verbose)
@@ -61,14 +61,26 @@ fi
cd $CGROUP2
echo +cpuset > cgroup.subtree_control
+
+#
+# If cpuset has been set up and used in child cgroups, we may not be able to
+# create partition under root cgroup because of the CPU exclusivity rule.
+# So we are going to skip the test if this is the case.
+#
[[ -d test ]] || mkdir test
-cd test
+echo 0-6 > test/cpuset.cpus
+echo root > test/cpuset.cpus.partition
+cat test/cpuset.cpus.partition | grep -q invalid
+RESULT=$?
+echo member > test/cpuset.cpus.partition
+echo "" > test/cpuset.cpus
+[[ $RESULT -eq 0 ]] && skip_test "Child cgroups are using cpuset!"
cleanup()
{
online_cpus
+ cd $CGROUP2
rmdir A1/A2/A3 A1/A2 A1 B1 > /dev/null 2>&1
- cd ..
rmdir test > /dev/null 2>&1
[[ -n "$SCHED_DEBUG" ]] &&
echo "$SCHED_DEBUG" > /sys/kernel/debug/sched/verbose
@@ -103,7 +115,7 @@ test_partition()
[[ $? -eq 0 ]] || exit 1
ACTUAL_VAL=$(cat cpuset.cpus.partition)
[[ $ACTUAL_VAL != $EXPECTED_VAL ]] && {
- echo "cpuset.cpus.partition: expect $EXPECTED_VAL, found $EXPECTED_VAL"
+ echo "cpuset.cpus.partition: expect $EXPECTED_VAL, found $ACTUAL_VAL"
echo "Test FAILED"
exit 1
}
@@ -114,7 +126,7 @@ test_effective_cpus()
EXPECTED_VAL=$1
ACTUAL_VAL=$(cat cpuset.cpus.effective)
[[ "$ACTUAL_VAL" != "$EXPECTED_VAL" ]] && {
- echo "cpuset.cpus.effective: expect '$EXPECTED_VAL', found '$EXPECTED_VAL'"
+ echo "cpuset.cpus.effective: expect '$EXPECTED_VAL', found '$ACTUAL_VAL'"
echo "Test FAILED"
exit 1
}
@@ -139,6 +151,7 @@ test_add_proc()
#
test_isolated()
{
+ cd $CGROUP2/test
echo 2-3 > cpuset.cpus
TYPE=$(cat cpuset.cpus.partition)
[[ $TYPE = member ]] || echo member > cpuset.cpus.partition
@@ -203,125 +216,163 @@ test_isolated()
#
# Cgroup test hierarchy
#
-# test -- A1 -- A2 -- A3
-# \- B1
+# root -- A1 -- A2 -- A3
+# +- B1
#
-# P<v> = set cpus.partition (0:member, 1:root, 2:isolated, -1:root invalid)
+# P<v> = set cpus.partition (0:member, 1:root, 2:isolated)
# C<l> = add cpu-list
# S<p> = use prefix in subtree_control
# T = put a task into cgroup
-# O<c>-<v> = Write <v> to CPU online file of <c>
+# O<c>=<v> = Write <v> to CPU online file of <c>
#
SETUP_A123_PARTITIONS="C1-3:P1:S+ C2-3:P1:S+ C3:P1"
TEST_MATRIX=(
- # test old-A1 old-A2 old-A3 old-B1 new-A1 new-A2 new-A3 new-B1 fail ECPUs Pstate
- # ---- ------ ------ ------ ------ ------ ------ ------ ------ ---- ----- ------
- " S+ C0-1 . . C2-3 S+ C4-5 . . 0 A2:0-1"
- " S+ C0-1 . . C2-3 P1 . . . 0 "
- " S+ C0-1 . . C2-3 P1:S+ C0-1:P1 . . 0 "
- " S+ C0-1 . . C2-3 P1:S+ C1:P1 . . 0 "
- " S+ C0-1:S+ . . C2-3 . . . P1 0 "
- " S+ C0-1:P1 . . C2-3 S+ C1 . . 0 "
- " S+ C0-1:P1 . . C2-3 S+ C1:P1 . . 0 "
- " S+ C0-1:P1 . . C2-3 S+ C1:P1 . P1 0 "
- " S+ C0-1:P1 . . C2-3 C4-5 . . . 0 A1:4-5"
- " S+ C0-1:P1 . . C2-3 S+:C4-5 . . . 0 A1:4-5"
- " S+ C0-1 . . C2-3:P1 . . . C2 0 "
- " S+ C0-1 . . C2-3:P1 . . . C4-5 0 B1:4-5"
- " S+ C0-3:P1:S+ C2-3:P1 . . . . . . 0 A1:0-1,A2:2-3"
- " S+ C0-3:P1:S+ C2-3:P1 . . C1-3 . . . 0 A1:1,A2:2-3"
- " S+ C2-3:P1:S+ C3:P1 . . C3 . . . 0 A1:,A2:3 A1:P1,A2:P1"
- " S+ C2-3:P1:S+ C3:P1 . . C3 P0 . . 0 A1:3,A2:3 A1:P1,A2:P0"
- " S+ C2-3:P1:S+ C2:P1 . . C2-4 . . . 0 A1:3-4,A2:2"
- " S+ C2-3:P1:S+ C3:P1 . . C3 . . C0-2 0 A1:,B1:0-2 A1:P1,A2:P1"
- " S+ $SETUP_A123_PARTITIONS . C2-3 . . . 0 A1:,A2:2,A3:3 A1:P1,A2:P1,A3:P1"
+ # old-A1 old-A2 old-A3 old-B1 new-A1 new-A2 new-A3 new-B1 fail ECPUs Pstate ISOLCPUS
+ # ------ ------ ------ ------ ------ ------ ------ ------ ---- ----- ------ --------
+ " C0-1 . . C2-3 S+ C4-5 . . 0 A2:0-1"
+ " C0-1 . . C2-3 P1 . . . 0 "
+ " C0-1 . . C2-3 P1:S+ C0-1:P1 . . 0 "
+ " C0-1 . . C2-3 P1:S+ C1:P1 . . 0 "
+ " C0-1:S+ . . C2-3 . . . P1 0 "
+ " C0-1:P1 . . C2-3 S+ C1 . . 0 "
+ " C0-1:P1 . . C2-3 S+ C1:P1 . . 0 "
+ " C0-1:P1 . . C2-3 S+ C1:P1 . P1 0 "
+ " C0-1:P1 . . C2-3 C4-5 . . . 0 A1:4-5"
+ " C0-1:P1 . . C2-3 S+:C4-5 . . . 0 A1:4-5"
+ " C0-1 . . C2-3:P1 . . . C2 0 "
+ " C0-1 . . C2-3:P1 . . . C4-5 0 B1:4-5"
+ "C0-3:P1:S+ C2-3:P1 . . . . . . 0 A1:0-1,A2:2-3"
+ "C0-3:P1:S+ C2-3:P1 . . C1-3 . . . 0 A1:1,A2:2-3"
+ "C2-3:P1:S+ C3:P1 . . C3 . . . 0 A1:,A2:3 A1:P1,A2:P1"
+ "C2-3:P1:S+ C3:P1 . . C3 P0 . . 0 A1:3,A2:3 A1:P1,A2:P0"
+ "C2-3:P1:S+ C2:P1 . . C2-4 . . . 0 A1:3-4,A2:2"
+ "C2-3:P1:S+ C3:P1 . . C3 . . C0-2 0 A1:,B1:0-2 A1:P1,A2:P1"
+ "$SETUP_A123_PARTITIONS . C2-3 . . . 0 A1:,A2:2,A3:3 A1:P1,A2:P1,A3:P1"
# CPU offlining cases:
- " S+ C0-1 . . C2-3 S+ C4-5 . O2-0 0 A1:0-1,B1:3"
- " S+ C0-3:P1:S+ C2-3:P1 . . O2-0 . . . 0 A1:0-1,A2:3"
- " S+ C0-3:P1:S+ C2-3:P1 . . O2-0 O2-1 . . 0 A1:0-1,A2:2-3"
- " S+ C0-3:P1:S+ C2-3:P1 . . O1-0 . . . 0 A1:0,A2:2-3"
- " S+ C0-3:P1:S+ C2-3:P1 . . O1-0 O1-1 . . 0 A1:0-1,A2:2-3"
- " S+ C2-3:P1:S+ C3:P1 . . O3-0 O3-1 . . 0 A1:2,A2:3 A1:P1,A2:P1"
- " S+ C2-3:P1:S+ C3:P2 . . O3-0 O3-1 . . 0 A1:2,A2:3 A1:P1,A2:P2"
- " S+ C2-3:P1:S+ C3:P1 . . O2-0 O2-1 . . 0 A1:2,A2:3 A1:P1,A2:P1"
- " S+ C2-3:P1:S+ C3:P2 . . O2-0 O2-1 . . 0 A1:2,A2:3 A1:P1,A2:P2"
- " S+ C2-3:P1:S+ C3:P1 . . O2-0 . . . 0 A1:,A2:3 A1:P1,A2:P1"
- " S+ C2-3:P1:S+ C3:P1 . . O3-0 . . . 0 A1:2,A2: A1:P1,A2:P1"
- " S+ C2-3:P1:S+ C3:P1 . . T:O2-0 . . . 0 A1:3,A2:3 A1:P1,A2:P-1"
- " S+ C2-3:P1:S+ C3:P1 . . . T:O3-0 . . 0 A1:2,A2:2 A1:P1,A2:P-1"
- " S+ $SETUP_A123_PARTITIONS . O1-0 . . . 0 A1:,A2:2,A3:3 A1:P1,A2:P1,A3:P1"
- " S+ $SETUP_A123_PARTITIONS . O2-0 . . . 0 A1:1,A2:,A3:3 A1:P1,A2:P1,A3:P1"
- " S+ $SETUP_A123_PARTITIONS . O3-0 . . . 0 A1:1,A2:2,A3: A1:P1,A2:P1,A3:P1"
- " S+ $SETUP_A123_PARTITIONS . T:O1-0 . . . 0 A1:2-3,A2:2-3,A3:3 A1:P1,A2:P-1,A3:P-1"
- " S+ $SETUP_A123_PARTITIONS . . T:O2-0 . . 0 A1:1,A2:3,A3:3 A1:P1,A2:P1,A3:P-1"
- " S+ $SETUP_A123_PARTITIONS . . . T:O3-0 . 0 A1:1,A2:2,A3:2 A1:P1,A2:P1,A3:P-1"
- " S+ $SETUP_A123_PARTITIONS . T:O1-0 O1-1 . . 0 A1:1,A2:2,A3:3 A1:P1,A2:P1,A3:P1"
- " S+ $SETUP_A123_PARTITIONS . . T:O2-0 O2-1 . 0 A1:1,A2:2,A3:3 A1:P1,A2:P1,A3:P1"
- " S+ $SETUP_A123_PARTITIONS . . . T:O3-0 O3-1 0 A1:1,A2:2,A3:3 A1:P1,A2:P1,A3:P1"
- " S+ $SETUP_A123_PARTITIONS . T:O1-0 O2-0 O1-1 . 0 A1:1,A2:,A3:3 A1:P1,A2:P1,A3:P1"
- " S+ $SETUP_A123_PARTITIONS . T:O1-0 O2-0 O2-1 . 0 A1:2-3,A2:2-3,A3:3 A1:P1,A2:P-1,A3:P-1"
-
- # test old-A1 old-A2 old-A3 old-B1 new-A1 new-A2 new-A3 new-B1 fail ECPUs Pstate
- # ---- ------ ------ ------ ------ ------ ------ ------ ------ ---- ----- ------
+ " C0-1 . . C2-3 S+ C4-5 . O2=0 0 A1:0-1,B1:3"
+ "C0-3:P1:S+ C2-3:P1 . . O2=0 . . . 0 A1:0-1,A2:3"
+ "C0-3:P1:S+ C2-3:P1 . . O2=0 O2=1 . . 0 A1:0-1,A2:2-3"
+ "C0-3:P1:S+ C2-3:P1 . . O1=0 . . . 0 A1:0,A2:2-3"
+ "C0-3:P1:S+ C2-3:P1 . . O1=0 O1=1 . . 0 A1:0-1,A2:2-3"
+ "C2-3:P1:S+ C3:P1 . . O3=0 O3=1 . . 0 A1:2,A2:3 A1:P1,A2:P1"
+ "C2-3:P1:S+ C3:P2 . . O3=0 O3=1 . . 0 A1:2,A2:3 A1:P1,A2:P2"
+ "C2-3:P1:S+ C3:P1 . . O2=0 O2=1 . . 0 A1:2,A2:3 A1:P1,A2:P1"
+ "C2-3:P1:S+ C3:P2 . . O2=0 O2=1 . . 0 A1:2,A2:3 A1:P1,A2:P2"
+ "C2-3:P1:S+ C3:P1 . . O2=0 . . . 0 A1:,A2:3 A1:P1,A2:P1"
+ "C2-3:P1:S+ C3:P1 . . O3=0 . . . 0 A1:2,A2: A1:P1,A2:P1"
+ "C2-3:P1:S+ C3:P1 . . T:O2=0 . . . 0 A1:3,A2:3 A1:P1,A2:P-1"
+ "C2-3:P1:S+ C3:P1 . . . T:O3=0 . . 0 A1:2,A2:2 A1:P1,A2:P-1"
+ "$SETUP_A123_PARTITIONS . O1=0 . . . 0 A1:,A2:2,A3:3 A1:P1,A2:P1,A3:P1"
+ "$SETUP_A123_PARTITIONS . O2=0 . . . 0 A1:1,A2:,A3:3 A1:P1,A2:P1,A3:P1"
+ "$SETUP_A123_PARTITIONS . O3=0 . . . 0 A1:1,A2:2,A3: A1:P1,A2:P1,A3:P1"
+ "$SETUP_A123_PARTITIONS . T:O1=0 . . . 0 A1:2-3,A2:2-3,A3:3 A1:P1,A2:P-1,A3:P-1"
+ "$SETUP_A123_PARTITIONS . . T:O2=0 . . 0 A1:1,A2:3,A3:3 A1:P1,A2:P1,A3:P-1"
+ "$SETUP_A123_PARTITIONS . . . T:O3=0 . 0 A1:1,A2:2,A3:2 A1:P1,A2:P1,A3:P-1"
+ "$SETUP_A123_PARTITIONS . T:O1=0 O1=1 . . 0 A1:1,A2:2,A3:3 A1:P1,A2:P1,A3:P1"
+ "$SETUP_A123_PARTITIONS . . T:O2=0 O2=1 . 0 A1:1,A2:2,A3:3 A1:P1,A2:P1,A3:P1"
+ "$SETUP_A123_PARTITIONS . . . T:O3=0 O3=1 0 A1:1,A2:2,A3:3 A1:P1,A2:P1,A3:P1"
+ "$SETUP_A123_PARTITIONS . T:O1=0 O2=0 O1=1 . 0 A1:1,A2:,A3:3 A1:P1,A2:P1,A3:P1"
+ "$SETUP_A123_PARTITIONS . T:O1=0 O2=0 O2=1 . 0 A1:2-3,A2:2-3,A3:3 A1:P1,A2:P-1,A3:P-1"
+
+ # old-A1 old-A2 old-A3 old-B1 new-A1 new-A2 new-A3 new-B1 fail ECPUs Pstate ISOLCPUS
+ # ------ ------ ------ ------ ------ ------ ------ ------ ---- ----- ------ --------
+ #
+ # Remote partition and cpuset.cpus.exclusive tests
+ #
+ " C0-3:S+ C1-3:S+ C2-3 . X2-3 . . . 0 A1:0-3,A2:1-3,A3:2-3,XA1:2-3"
+ " C0-3:S+ C1-3:S+ C2-3 . X2-3 X2-3:P2 . . 0 A1:0-1,A2:2-3,A3:2-3 A1:P0,A2:P2 2-3"
+ " C0-3:S+ C1-3:S+ C2-3 . X2-3 X3:P2 . . 0 A1:0-2,A2:3,A3:3 A1:P0,A2:P2 3"
+ " C0-3:S+ C1-3:S+ C2-3 . X2-3 X2-3 X2-3:P2 . 0 A1:0-1,A2:1,A3:2-3 A1:P0,A3:P2 2-3"
+ " C0-3:S+ C1-3:S+ C2-3 . X2-3 X2-3 X2-3:P2:C3 . 0 A1:0-2,A2:1-2,A3:3 A1:P0,A3:P2 3"
+ " C0-3:S+ C1-3:S+ C2-3 C2-3 . . . P2 0 A1:0-3,A2:1-3,A3:2-3,B1:2-3 A1:P0,A3:P0,B1:P-2"
+ " C0-3:S+ C1-3:S+ C2-3 C4-5 . . . P2 0 B1:4-5 B1:P2 4-5"
+ " C0-3:S+ C1-3:S+ C2-3 C4 X2-3 X2-3 X2-3:P2 P2 0 A3:2-3,B1:4 A3:P2,B1:P2 2-4"
+ " C0-3:S+ C1-3:S+ C2-3 C4 X2-3 X2-3 X2-3:P2:C1-3 P2 0 A3:2-3,B1:4 A3:P2,B1:P2 2-4"
+ " C0-3:S+ C1-3:S+ C2-3 C4 X1-3 X1-3:P2 P2 . 0 A2:1,A3:2-3 A2:P2,A3:P2 1-3"
+ " C0-3:S+ C1-3:S+ C2-3 C4 X2-3 X2-3 X2-3:P2 P2:C4-5 0 A3:2-3,B1:4-5 A3:P2,B1:P2 2-5"
+
+ # Nested remote/local partition tests
+ " C0-3:S+ C1-3:S+ C2-3 C4-5 X2-3 X2-3:P1 P2 P1 0 A1:0-1,A2:,A3:2-3,B1:4-5 \
+ A1:P0,A2:P1,A3:P2,B1:P1 2-3"
+ " C0-3:S+ C1-3:S+ C2-3 C4 X2-3 X2-3:P1 P2 P1 0 A1:0-1,A2:,A3:2-3,B1:4 \
+ A1:P0,A2:P1,A3:P2,B1:P1 2-4"
+ " C0-3:S+ C1-3:S+ C3 C4 X2-3 X2-3:P1 P2 P1 0 A1:0-1,A2:2,A3:3,B1:4 \
+ A1:P0,A2:P1,A3:P2,B1:P1 2-4"
+
+ # Remote partition offline tests
+ " C0-3:S+ C1-3:S+ C2-3 . X2-3 X2-3 X2-3:P2:O2=0 . 0 A1:0-1,A2:1,A3:3 A1:P0,A3:P2 2-3"
+ " C0-3:S+ C1-3:S+ C2-3 . X2-3 X2-3 X2-3:P2:O2=0 O2=1 0 A1:0-1,A2:1,A3:2-3 A1:P0,A3:P2 2-3"
+ " C0-3:S+ C1-3:S+ C3 . X2-3 X2-3 P2:O3=0 . 0 A1:0-2,A2:1-2,A3: A1:P0,A3:P2 3"
+ " C0-3:S+ C1-3:S+ C3 . X2-3 X2-3 T:P2:O3=0 . 0 A1:0-2,A2:1-2,A3:1-2 A1:P0,A3:P-2 3"
+
+ # An invalidated remote partition cannot self-recover from hotplug
+ " C0-3:S+ C1-3:S+ C2 . X2-3 X2-3 T:P2:O2=0 O2=1 0 A1:0-3,A2:1-3,A3:2 A1:P0,A3:P-2"
+
+ # old-A1 old-A2 old-A3 old-B1 new-A1 new-A2 new-A3 new-B1 fail ECPUs Pstate ISOLCPUS
+ # ------ ------ ------ ------ ------ ------ ------ ------ ---- ----- ------ --------
#
# Incorrect change to cpuset.cpus invalidates partition root
#
# Adding CPUs to partition root that are not in parent's
# cpuset.cpus is allowed, but those extra CPUs are ignored.
- " S+ C2-3:P1:S+ C3:P1 . . . C2-4 . . 0 A1:,A2:2-3 A1:P1,A2:P1"
+ "C2-3:P1:S+ C3:P1 . . . C2-4 . . 0 A1:,A2:2-3 A1:P1,A2:P1"
# Taking away all CPUs from parent or itself if there are tasks
# will make the partition invalid.
- " S+ C2-3:P1:S+ C3:P1 . . T C2-3 . . 0 A1:2-3,A2:2-3 A1:P1,A2:P-1"
- " S+ C3:P1:S+ C3 . . T P1 . . 0 A1:3,A2:3 A1:P1,A2:P-1"
- " S+ $SETUP_A123_PARTITIONS . T:C2-3 . . . 0 A1:2-3,A2:2-3,A3:3 A1:P1,A2:P-1,A3:P-1"
- " S+ $SETUP_A123_PARTITIONS . T:C2-3:C1-3 . . . 0 A1:1,A2:2,A3:3 A1:P1,A2:P1,A3:P1"
+ "C2-3:P1:S+ C3:P1 . . T C2-3 . . 0 A1:2-3,A2:2-3 A1:P1,A2:P-1"
+ " C3:P1:S+ C3 . . T P1 . . 0 A1:3,A2:3 A1:P1,A2:P-1"
+ "$SETUP_A123_PARTITIONS . T:C2-3 . . . 0 A1:2-3,A2:2-3,A3:3 A1:P1,A2:P-1,A3:P-1"
+ "$SETUP_A123_PARTITIONS . T:C2-3:C1-3 . . . 0 A1:1,A2:2,A3:3 A1:P1,A2:P1,A3:P1"
# Changing a partition root to member makes child partitions invalid
- " S+ C2-3:P1:S+ C3:P1 . . P0 . . . 0 A1:2-3,A2:3 A1:P0,A2:P-1"
- " S+ $SETUP_A123_PARTITIONS . C2-3 P0 . . 0 A1:2-3,A2:2-3,A3:3 A1:P1,A2:P0,A3:P-1"
+ "C2-3:P1:S+ C3:P1 . . P0 . . . 0 A1:2-3,A2:3 A1:P0,A2:P-1"
+ "$SETUP_A123_PARTITIONS . C2-3 P0 . . 0 A1:2-3,A2:2-3,A3:3 A1:P1,A2:P0,A3:P-1"
# cpuset.cpus can contains cpus not in parent's cpuset.cpus as long
# as they overlap.
- " S+ C2-3:P1:S+ . . . . C3-4:P1 . . 0 A1:2,A2:3 A1:P1,A2:P1"
+ "C2-3:P1:S+ . . . . C3-4:P1 . . 0 A1:2,A2:3 A1:P1,A2:P1"
# Deletion of CPUs distributed to child cgroup is allowed.
- " S+ C0-1:P1:S+ C1 . C2-3 C4-5 . . . 0 A1:4-5,A2:4-5"
+ "C0-1:P1:S+ C1 . C2-3 C4-5 . . . 0 A1:4-5,A2:4-5"
# To become a valid partition root, cpuset.cpus must overlap parent's
# cpuset.cpus.
- " S+ C0-1:P1 . . C2-3 S+ C4-5:P1 . . 0 A1:0-1,A2:0-1 A1:P1,A2:P-1"
+ " C0-1:P1 . . C2-3 S+ C4-5:P1 . . 0 A1:0-1,A2:0-1 A1:P1,A2:P-1"
# Enabling partition with child cpusets is allowed
- " S+ C0-1:S+ C1 . C2-3 P1 . . . 0 A1:0-1,A2:1 A1:P1"
+ " C0-1:S+ C1 . C2-3 P1 . . . 0 A1:0-1,A2:1 A1:P1"
# A partition root with non-partition root parent is invalid, but it
# can be made valid if its parent becomes a partition root too.
- " S+ C0-1:S+ C1 . C2-3 . P2 . . 0 A1:0-1,A2:1 A1:P0,A2:P-2"
- " S+ C0-1:S+ C1:P2 . C2-3 P1 . . . 0 A1:0,A2:1 A1:P1,A2:P2"
+ " C0-1:S+ C1 . C2-3 . P2 . . 0 A1:0-1,A2:1 A1:P0,A2:P-2"
+ " C0-1:S+ C1:P2 . C2-3 P1 . . . 0 A1:0,A2:1 A1:P1,A2:P2"
# A non-exclusive cpuset.cpus change will invalidate partition and its siblings
- " S+ C0-1:P1 . . C2-3 C0-2 . . . 0 A1:0-2,B1:2-3 A1:P-1,B1:P0"
- " S+ C0-1:P1 . . P1:C2-3 C0-2 . . . 0 A1:0-2,B1:2-3 A1:P-1,B1:P-1"
- " S+ C0-1 . . P1:C2-3 C0-2 . . . 0 A1:0-2,B1:2-3 A1:P0,B1:P-1"
+ " C0-1:P1 . . C2-3 C0-2 . . . 0 A1:0-2,B1:2-3 A1:P-1,B1:P0"
+ " C0-1:P1 . . P1:C2-3 C0-2 . . . 0 A1:0-2,B1:2-3 A1:P-1,B1:P-1"
+ " C0-1 . . P1:C2-3 C0-2 . . . 0 A1:0-2,B1:2-3 A1:P0,B1:P-1"
- # test old-A1 old-A2 old-A3 old-B1 new-A1 new-A2 new-A3 new-B1 fail ECPUs Pstate
- # ---- ------ ------ ------ ------ ------ ------ ------ ------ ---- ----- ------
+ # old-A1 old-A2 old-A3 old-B1 new-A1 new-A2 new-A3 new-B1 fail ECPUs Pstate ISOLCPUS
+ # ------ ------ ------ ------ ------ ------ ------ ------ ---- ----- ------ --------
# Failure cases:
# A task cannot be added to a partition with no cpu
- " S+ C2-3:P1:S+ C3:P1 . . O2-0:T . . . 1 A1:,A2:3 A1:P1,A2:P1"
+ "C2-3:P1:S+ C3:P1 . . O2=0:T . . . 1 A1:,A2:3 A1:P1,A2:P1"
+
+ # cpuset.cpus.exclusive must be a subset of cpuset.cpus & parent's cpuset.cpus.exclusive
+ " C0-3:S+ C1-3:S+ C2-3 . X2-4 . . . 1"
+ " C0-3:S+ C1-3:S+ C2-3 . X1-2 X2-3 . . 1"
)
#
# Write to the cpu online file
-# $1 - <c>-<v> where <c> = cpu number, <v> value to be written
+# $1 - <c>=<v> where <c> = cpu number, <v> value to be written
#
write_cpu_online()
{
- CPU=${1%-*}
- VAL=${1#*-}
+ CPU=${1%=*}
+ VAL=${1#*=}
CPUFILE=//sys/devices/system/cpu/cpu${CPU}/online
if [[ $VAL -eq 0 ]]
then
@@ -349,11 +400,12 @@ set_ctrl_state()
TMPMSG=/tmp/.msg_$$
CGRP=$1
STATE=$2
- SHOWERR=${3}${VERBOSE}
+ SHOWERR=${3}
CTRL=${CTRL:=$CONTROLLER}
HASERR=0
REDIRECT="2> $TMPMSG"
[[ -z "$STATE" || "$STATE" = '.' ]] && return 0
+ [[ $VERBOSE -gt 0 ]] && SHOWERR=1
rm -f $TMPMSG
for CMD in $(echo $STATE | sed -e "s/:/ /g")
@@ -362,12 +414,18 @@ set_ctrl_state()
SFILE=$CGRP/cgroup.subtree_control
PFILE=$CGRP/cpuset.cpus.partition
CFILE=$CGRP/cpuset.cpus
+ XFILE=$CGRP/cpuset.cpus.exclusive
S=$(expr substr $CMD 1 1)
if [[ $S = S ]]
then
PREFIX=${CMD#?}
COMM="echo ${PREFIX}${CTRL} > $SFILE"
eval $COMM $REDIRECT
+ elif [[ $S = X ]]
+ then
+ CPUS=${CMD#?}
+ COMM="echo $CPUS > $XFILE"
+ eval $COMM $REDIRECT
elif [[ $S = C ]]
then
CPUS=${CMD#?}
@@ -430,7 +488,7 @@ online_cpus()
[[ -n "OFFLINE_CPUS" ]] && {
for C in $OFFLINE_CPUS
do
- write_cpu_online ${C}-1
+ write_cpu_online ${C}=1
done
}
}
@@ -443,18 +501,25 @@ reset_cgroup_states()
echo 0 > $CGROUP2/cgroup.procs
online_cpus
rmdir A1/A2/A3 A1/A2 A1 B1 > /dev/null 2>&1
- set_ctrl_state . S-
+ pause 0.02
+ set_ctrl_state . R-
pause 0.01
}
dump_states()
{
- for DIR in A1 A1/A2 A1/A2/A3 B1
+ for DIR in . A1 A1/A2 A1/A2/A3 B1
do
+ CPUS=$DIR/cpuset.cpus
ECPUS=$DIR/cpuset.cpus.effective
+ XCPUS=$DIR/cpuset.cpus.exclusive
PRS=$DIR/cpuset.cpus.partition
+ PCPUS=$DIR/.__DEBUG__.cpuset.cpus.subpartitions
+ [[ -e $CPUS ]] && echo "$CPUS: $(cat $CPUS)"
+ [[ -e $XCPUS ]] && echo "$XCPUS: $(cat $XCPUS)"
[[ -e $ECPUS ]] && echo "$ECPUS: $(cat $ECPUS)"
[[ -e $PRS ]] && echo "$PRS: $(cat $PRS)"
+ [[ -e $PCPUS ]] && echo "$PCPUS: $(cat $PCPUS)"
done
}
@@ -470,11 +535,17 @@ check_effective_cpus()
set -- $(echo $CHK | sed -e "s/:/ /g")
CGRP=$1
CPUS=$2
+ if [[ $CGRP = X* ]]
+ then
+ CGRP=${CGRP#X}
+ FILE=cpuset.cpus.exclusive
+ else
+ FILE=cpuset.cpus.effective
+ fi
[[ $CGRP = A2 ]] && CGRP=A1/A2
[[ $CGRP = A3 ]] && CGRP=A1/A2/A3
- FILE=$CGRP/cpuset.cpus.effective
- [[ -e $FILE ]] || return 1
- [[ $CPUS = $(cat $FILE) ]] || return 1
+ [[ -e $CGRP/$FILE ]] || return 1
+ [[ $CPUS = $(cat $CGRP/$FILE) ]] || return 1
done
}
@@ -524,6 +595,64 @@ check_cgroup_states()
return 0
}
+#
+# Get isolated (including offline) CPUs by looking at
+# /sys/kernel/debug/sched/domains and compare that with the expected value.
+#
+# Note that a sched domain of just 1 CPU will be considered isolated.
+#
+# $1 - expected isolated cpu list
+#
+check_isolcpus()
+{
+ EXPECT_VAL=$1
+ ISOLCPUS=
+ LASTISOLCPU=
+ SCHED_DOMAINS=/sys/kernel/debug/sched/domains
+ [[ -d $SCHED_DOMAINS ]] || return
+
+ for ((CPU=0; CPU < $NR_CPUS; CPU++))
+ do
+ [[ -n "$(ls ${SCHED_DOMAINS}/cpu$CPU)" ]] && continue
+
+ if [[ -z "$LASTISOLCPU" ]]
+ then
+ ISOLCPUS=$CPU
+ LASTISOLCPU=$CPU
+ elif [[ "$LASTISOLCPU" -eq $((CPU - 1)) ]]
+ then
+ echo $ISOLCPUS | grep -q "\<$LASTISOLCPU\$"
+ if [[ $? -eq 0 ]]
+ then
+ ISOLCPUS=${ISOLCPUS}-
+ fi
+ LASTISOLCPU=$CPU
+ else
+ if [[ $ISOLCPUS = *- ]]
+ then
+ ISOLCPUS=${ISOLCPUS}$LASTISOLCPU
+ fi
+ ISOLCPUS=${ISOLCPUS},$CPU
+ LASTISOLCPU=$CPU
+ fi
+ done
+ [[ "$ISOLCPUS" = *- ]] && ISOLCPUS=${ISOLCPUS}$LASTISOLCPU
+ [[ $EXPECT_VAL = $ISOLCPUS ]]
+}
+
+test_fail()
+{
+ TESTNUM=$1
+ TESTTYPE=$2
+ ADDINFO=$3
+ echo "Test $TEST[$TESTNUM] failed $TESTTYPE check!"
+ [[ -n "$ADDINFO" ]] && echo "*** $ADDINFO ***"
+ eval echo \"\${$TEST[$I]}\"
+ echo
+ dump_states
+ exit 1
+}
+
#
# Run cpuset state transition test
# $1 - test matrix name
@@ -536,88 +665,80 @@ run_state_test()
{
TEST=$1
CONTROLLER=cpuset
- CPULIST=0-6
I=0
eval CNT="\${#$TEST[@]}"
reset_cgroup_states
- echo $CPULIST > cpuset.cpus
- echo root > cpuset.cpus.partition
console_msg "Running state transition test ..."
while [[ $I -lt $CNT ]]
do
echo "Running test $I ..." > /dev/console
+ [[ $VERBOSE -gt 1 ]] && {
+ echo ""
+ eval echo \"\${$TEST[$I]}\"
+ }
eval set -- "\${$TEST[$I]}"
- ROOT=$1
- OLD_A1=$2
- OLD_A2=$3
- OLD_A3=$4
- OLD_B1=$5
- NEW_A1=$6
- NEW_A2=$7
- NEW_A3=$8
- NEW_B1=$9
- RESULT=${10}
- ECPUS=${11}
- STATES=${12}
-
- set_ctrl_state_noerr . $ROOT
+ OLD_A1=$1
+ OLD_A2=$2
+ OLD_A3=$3
+ OLD_B1=$4
+ NEW_A1=$5
+ NEW_A2=$6
+ NEW_A3=$7
+ NEW_B1=$8
+ RESULT=$9
+ ECPUS=${10}
+ STATES=${11}
+ ICPUS=${12}
+
+ set_ctrl_state_noerr B1 $OLD_B1
set_ctrl_state_noerr A1 $OLD_A1
set_ctrl_state_noerr A1/A2 $OLD_A2
set_ctrl_state_noerr A1/A2/A3 $OLD_A3
- set_ctrl_state_noerr B1 $OLD_B1
RETVAL=0
set_ctrl_state A1 $NEW_A1; ((RETVAL += $?))
set_ctrl_state A1/A2 $NEW_A2; ((RETVAL += $?))
set_ctrl_state A1/A2/A3 $NEW_A3; ((RETVAL += $?))
set_ctrl_state B1 $NEW_B1; ((RETVAL += $?))
- [[ $RETVAL -ne $RESULT ]] && {
- echo "Test $TEST[$I] failed result check!"
- eval echo \"\${$TEST[$I]}\"
- dump_states
- exit 1
- }
+ [[ $RETVAL -ne $RESULT ]] && test_fail $I result
[[ -n "$ECPUS" && "$ECPUS" != . ]] && {
check_effective_cpus $ECPUS
- [[ $? -ne 0 ]] && {
- echo "Test $TEST[$I] failed effective CPU check!"
- eval echo \"\${$TEST[$I]}\"
- echo
- dump_states
- exit 1
- }
+ [[ $? -ne 0 ]] && test_fail $I "effective CPU"
}
- [[ -n "$STATES" ]] && {
+ [[ -n "$STATES" && "$STATES" != . ]] && {
check_cgroup_states $STATES
- [[ $? -ne 0 ]] && {
- echo "FAILED: Test $TEST[$I] failed states check!"
- eval echo \"\${$TEST[$I]}\"
- echo
- dump_states
- exit 1
- }
+ [[ $? -ne 0 ]] && test_fail $I states
}
+ # Compare the expected isolated CPUs with the actual ones,
+ # if available
+ [[ -n "$ICPUS" ]] && {
+ check_isolcpus $ICPUS
+ [[ $? -ne 0 ]] && test_fail $I "isolated CPU" \
+ "Expect $ICPUS, get $ISOLCPUS instead"
+ }
reset_cgroup_states
#
# Check to see if effective cpu list changes
#
- pause 0.05
NEWLIST=$(cat cpuset.cpus.effective)
+ [[ $NEWLIST != $CPULIST ]] && {
+ # Wait a bit longer & recheck
+ pause 0.05
+ NEWLIST=$(cat cpuset.cpus.effective)
+ }
[[ $NEWLIST != $CPULIST ]] && {
echo "Effective cpus changed to $NEWLIST after test $I!"
exit 1
}
- [[ -n "$VERBOSE" ]] && echo "Test $I done."
+ [[ $VERBOSE -gt 0 ]] && echo "Test $I done."
((I++))
done
echo "All $I tests of $TEST PASSED."
-
- echo member > cpuset.cpus.partition
}
#
@@ -642,6 +763,7 @@ test_inotify()
{
ERR=0
PRS=/tmp/.prs_$$
+ cd $CGROUP2/test
[[ -f $WAIT_INOTIFY ]] || {
echo "wait_inotify not found, inotify test SKIPPED."
return
@@ -655,7 +777,7 @@ test_inotify()
rm -f $PRS
wait_inotify $PWD/cpuset.cpus.partition $PRS &
pause 0.01
- set_ctrl_state . "O1-0"
+ set_ctrl_state . "O1=0"
pause 0.01
check_cgroup_states ".:P-1"
if [[ $? -ne 0 ]]
@@ -689,5 +811,3 @@ run_state_test TEST_MATRIX
test_isolated
test_inotify
echo "All tests PASSED."
-cd ..
-rmdir test
This patch extends the test_cpuset_prs.sh test script to support testing the new remote partition and use the new "cpuset.cpus.exclusive" file by adding new tests for them. In addition, the following changes are also made: 1) Run the state transition tests directly under root to ease testing of remote partition and remove the unneeded test column. 2) Add a column to for the list of expected isolated CPUs and compare it with the actual value by looking at the state of /sys/kernel/debug/sched/domains which will be available if the verbose flag is set. Signed-off-by: Waiman Long <longman@redhat.com> --- .../selftests/cgroup/test_cpuset_prs.sh | 398 ++++++++++++------ 1 file changed, 259 insertions(+), 139 deletions(-)