| Message ID | 20231031-send-lp-kselftests-v3-2-2b1655c2605f@suse.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | livepatch: Move modules to selftests and add a new test | expand |
On Tue, Oct 31, 2023 at 06:10:52PM -0300, Marcos Paulo de Souza wrote: > The modules are being moved from lib/livepatch to > tools/testing/selftests/livepatch/test_modules. > > This code moving will allow writing more complex tests, like for example an > userspace C code that will call a livepatched kernel function. > > The modules are now built as out-of-tree > modules, but being part of the kernel source means they will be maintained. > > Another advantage of the code moving is to be able to easily change, > debug and rebuild the tests by running make on the selftests/livepatch directory, > which is not currently possible since the modules on lib/livepatch are > build and installed using the "modules" target. > > The current approach also keeps the ability to execute the tests manually by > executing the scripts inside selftests/livepatch directory, as it's currently > supported. If the modules are modified, they needed to be rebuilt before running > the scripts though. > > The modules are built before running the selftests when using the > kselftest invocations: > > make kselftest TARGETS=livepatch > or > make -C tools/testing/selftests/livepatch run_tests > Quick question: - We have been building with CONFIG_LIVEPATCH_TEST=m to generate the test modules at kernel build time - Our packaging filters out the selftest scripts and supporting modules from the general kernel RPM package into their subpackages - Tests are run as part of CKI or other manual tests by installing the pre-built packages from the previous step After this patch, we would need to add something like the following to our kernel build, before packaging: $ make KDIR=$(pwd) -C tools/testing/selftests/livepatch/ ^^^^ If this is the correct way to build the test modules for *this* tree and /lib/modules/$(shell uname -r)/build... it might be useful to document in the commit message as an alternative use case. -- Joe > Having the modules being built as out-of-modules requires changing the > currently > used 'modprobe' by 'insmod' and adapt the test scripts that check for the kernel > message buffer. > > As there aren't any modules being built on lib/livepatch, remove the > TEST_LIVEPATCH Kconfig and it's references. > > Note: "make gen_tar" packages the pre-built binaries into the tarball. > It means that it will store the test modules pre-built for > the kernel running on the build host. > > Note that these modules need not binary compatible with > the kernel built from the same sources. But the same > is true for other packaged selftest binaries. > > The entire kernel sources are needed for rebuilding > the selftests on another system. > > Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com> > --- > arch/s390/configs/debug_defconfig | 1 - > arch/s390/configs/defconfig | 1 - > lib/Kconfig.debug | 22 ---------- > lib/Makefile | 2 - > lib/livepatch/Makefile | 14 ------ > tools/testing/selftests/livepatch/Makefile | 1 + > tools/testing/selftests/livepatch/README | 17 +++++--- > tools/testing/selftests/livepatch/config | 1 - > tools/testing/selftests/livepatch/functions.sh | 34 ++++++--------- > .../testing/selftests/livepatch/test-callbacks.sh | 50 +++++++++++----------- > tools/testing/selftests/livepatch/test-ftrace.sh | 6 +-- > .../testing/selftests/livepatch/test-livepatch.sh | 10 ++--- > .../selftests/livepatch/test-shadow-vars.sh | 2 +- > tools/testing/selftests/livepatch/test-state.sh | 18 ++++---- > tools/testing/selftests/livepatch/test-sysfs.sh | 6 +-- > .../selftests/livepatch/test_modules/Makefile | 19 ++++++++ > .../test_modules}/test_klp_atomic_replace.c | 0 > .../test_modules}/test_klp_callbacks_busy.c | 0 > .../test_modules}/test_klp_callbacks_demo.c | 0 > .../test_modules}/test_klp_callbacks_demo2.c | 0 > .../test_modules}/test_klp_callbacks_mod.c | 0 > .../livepatch/test_modules}/test_klp_livepatch.c | 0 > .../livepatch/test_modules}/test_klp_shadow_vars.c | 0 > .../livepatch/test_modules}/test_klp_state.c | 0 > .../livepatch/test_modules}/test_klp_state2.c | 0 > .../livepatch/test_modules}/test_klp_state3.c | 0 > 26 files changed, 89 insertions(+), 115 deletions(-) > > diff --git a/arch/s390/configs/debug_defconfig b/arch/s390/configs/debug_defconfig > index 438cd92e6080..9672b9f31710 100644 > --- a/arch/s390/configs/debug_defconfig > +++ b/arch/s390/configs/debug_defconfig > @@ -885,4 +885,3 @@ CONFIG_ATOMIC64_SELFTEST=y > CONFIG_STRING_SELFTEST=y > CONFIG_TEST_BITOPS=m > CONFIG_TEST_BPF=m > -CONFIG_TEST_LIVEPATCH=m > diff --git a/arch/s390/configs/defconfig b/arch/s390/configs/defconfig > index 1b8150e50f6a..a8a66264a72d 100644 > --- a/arch/s390/configs/defconfig > +++ b/arch/s390/configs/defconfig > @@ -813,4 +813,3 @@ CONFIG_KPROBES_SANITY_TEST=m > CONFIG_PERCPU_TEST=m > CONFIG_ATOMIC64_SELFTEST=y > CONFIG_TEST_BPF=m > -CONFIG_TEST_LIVEPATCH=m > diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug > index fa307f93fa2e..af67c5f5d031 100644 > --- a/lib/Kconfig.debug > +++ b/lib/Kconfig.debug > @@ -2862,28 +2862,6 @@ config TEST_MEMCAT_P > > If unsure, say N. > > -config TEST_LIVEPATCH > - tristate "Test livepatching" > - default n > - depends on DYNAMIC_DEBUG > - depends on LIVEPATCH > - depends on m > - help > - Test kernel livepatching features for correctness. The tests will > - load test modules that will be livepatched in various scenarios. > - > - To run all the livepatching tests: > - > - make -C tools/testing/selftests TARGETS=livepatch run_tests > - > - Alternatively, individual tests may be invoked: > - > - tools/testing/selftests/livepatch/test-callbacks.sh > - tools/testing/selftests/livepatch/test-livepatch.sh > - tools/testing/selftests/livepatch/test-shadow-vars.sh > - > - If unsure, say N. > - > config TEST_OBJAGG > tristate "Perform selftest on object aggreration manager" > default n > diff --git a/lib/Makefile b/lib/Makefile > index 740109b6e2c8..b96b280787ca 100644 > --- a/lib/Makefile > +++ b/lib/Makefile > @@ -132,8 +132,6 @@ endif > obj-$(CONFIG_TEST_FPU) += test_fpu.o > CFLAGS_test_fpu.o += $(FPU_CFLAGS) > > -obj-$(CONFIG_TEST_LIVEPATCH) += livepatch/ > - > # Some KUnit files (hooks.o) need to be built-in even when KUnit is a module, > # so we can't just use obj-$(CONFIG_KUNIT). > ifdef CONFIG_KUNIT > diff --git a/lib/livepatch/Makefile b/lib/livepatch/Makefile > deleted file mode 100644 > index dcc912b3478f..000000000000 > --- a/lib/livepatch/Makefile > +++ /dev/null > @@ -1,14 +0,0 @@ > -# SPDX-License-Identifier: GPL-2.0 > -# > -# Makefile for livepatch test code. > - > -obj-$(CONFIG_TEST_LIVEPATCH) += test_klp_atomic_replace.o \ > - test_klp_callbacks_demo.o \ > - test_klp_callbacks_demo2.o \ > - test_klp_callbacks_busy.o \ > - test_klp_callbacks_mod.o \ > - test_klp_livepatch.o \ > - test_klp_shadow_vars.o \ > - test_klp_state.o \ > - test_klp_state2.o \ > - test_klp_state3.o > diff --git a/tools/testing/selftests/livepatch/Makefile b/tools/testing/selftests/livepatch/Makefile > index 02fadc9d55e0..119e2bbebe5d 100644 > --- a/tools/testing/selftests/livepatch/Makefile > +++ b/tools/testing/selftests/livepatch/Makefile > @@ -1,5 +1,6 @@ > # SPDX-License-Identifier: GPL-2.0 > > +TEST_GEN_MODS_DIR := test_modules > TEST_PROGS_EXTENDED := functions.sh > TEST_PROGS := \ > test-livepatch.sh \ > diff --git a/tools/testing/selftests/livepatch/README b/tools/testing/selftests/livepatch/README > index 0942dd5826f8..c5eb3cb67b66 100644 > --- a/tools/testing/selftests/livepatch/README > +++ b/tools/testing/selftests/livepatch/README > @@ -13,23 +13,26 @@ the message buffer for only the duration of each individual test.) > Config > ------ > > -Set these config options and their prerequisites: > - > -CONFIG_LIVEPATCH=y > -CONFIG_TEST_LIVEPATCH=m > +Set CONFIG_LIVEPATCH=y option and it's prerequisites. > > > Running the tests > ----------------- > > -Test kernel modules are built as part of lib/ (make modules) and need to > -be installed (make modules_install) as the test scripts will modprobe > -them. > +Test kernel modules are built before running the livepatch selftests. The > +modules are located under test_modules directory, and are built as out-of-tree > +modules. This is specially useful since the same sources can be built and > +tested on systems with different kABI, ensuring they the tests are backwards > +compatible. The modules will be loaded by the test scripts using insmod. > > To run the livepatch selftests, from the top of the kernel source tree: > > % make -C tools/testing/selftests TARGETS=livepatch run_tests > > +or > + > + % make kselftest TARGETS=livepatch > + > > Adding tests > ------------ > diff --git a/tools/testing/selftests/livepatch/config b/tools/testing/selftests/livepatch/config > index ad23100cb27c..e88bf518a23a 100644 > --- a/tools/testing/selftests/livepatch/config > +++ b/tools/testing/selftests/livepatch/config > @@ -1,3 +1,2 @@ > CONFIG_LIVEPATCH=y > CONFIG_DYNAMIC_DEBUG=y > -CONFIG_TEST_LIVEPATCH=m > diff --git a/tools/testing/selftests/livepatch/functions.sh b/tools/testing/selftests/livepatch/functions.sh > index c8416c54b463..e60cf09491a6 100644 > --- a/tools/testing/selftests/livepatch/functions.sh > +++ b/tools/testing/selftests/livepatch/functions.sh > @@ -127,16 +127,14 @@ function loop_until() { > done > } > > -function assert_mod() { > - local mod="$1" > - > - modprobe --dry-run "$mod" &>/dev/null > -} > - > function is_livepatch_mod() { > local mod="$1" > > - if [[ $(modinfo "$mod" | awk '/^livepatch:/{print $NF}') == "Y" ]]; then > + if [[ ! -f "test_modules/$mod.ko" ]]; then > + die "Can't find \"test_modules/$mod.ko\", try \"make\"" > + fi > + > + if [[ $(modinfo "test_modules/$mod.ko" | awk '/^livepatch:/{print $NF}') == "Y" ]]; then > return 0 > fi > > @@ -146,9 +144,9 @@ function is_livepatch_mod() { > function __load_mod() { > local mod="$1"; shift > > - local msg="% modprobe $mod $*" > + local msg="% insmod test_modules/$mod.ko $*" > log "${msg%% }" > - ret=$(modprobe "$mod" "$@" 2>&1) > + ret=$(insmod "test_modules/$mod.ko" "$@" 2>&1) > if [[ "$ret" != "" ]]; then > die "$ret" > fi > @@ -161,13 +159,10 @@ function __load_mod() { > > # load_mod(modname, params) - load a kernel module > # modname - module name to load > -# params - module parameters to pass to modprobe > +# params - module parameters to pass to insmod > function load_mod() { > local mod="$1"; shift > > - assert_mod "$mod" || > - skip "unable to load module ${mod}, verify CONFIG_TEST_LIVEPATCH=m and run self-tests as root" > - > is_livepatch_mod "$mod" && > die "use load_lp() to load the livepatch module $mod" > > @@ -177,13 +172,10 @@ function load_mod() { > # load_lp_nowait(modname, params) - load a kernel module with a livepatch > # but do not wait on until the transition finishes > # modname - module name to load > -# params - module parameters to pass to modprobe > +# params - module parameters to pass to insmod > function load_lp_nowait() { > local mod="$1"; shift > > - assert_mod "$mod" || > - skip "unable to load module ${mod}, verify CONFIG_TEST_LIVEPATCH=m and run self-tests as root" > - > is_livepatch_mod "$mod" || > die "module $mod is not a livepatch" > > @@ -196,7 +188,7 @@ function load_lp_nowait() { > > # load_lp(modname, params) - load a kernel module with a livepatch > # modname - module name to load > -# params - module parameters to pass to modprobe > +# params - module parameters to pass to insmod > function load_lp() { > local mod="$1"; shift > > @@ -209,13 +201,13 @@ function load_lp() { > > # load_failing_mod(modname, params) - load a kernel module, expect to fail > # modname - module name to load > -# params - module parameters to pass to modprobe > +# params - module parameters to pass to insmod > function load_failing_mod() { > local mod="$1"; shift > > - local msg="% modprobe $mod $*" > + local msg="% insmod test_modules/$mod.ko $*" > log "${msg%% }" > - ret=$(modprobe "$mod" "$@" 2>&1) > + ret=$(insmod "test_modules/$mod.ko" "$@" 2>&1) > if [[ "$ret" == "" ]]; then > die "$mod unexpectedly loaded" > fi > diff --git a/tools/testing/selftests/livepatch/test-callbacks.sh b/tools/testing/selftests/livepatch/test-callbacks.sh > index 90b26dbb2626..32b150e25b10 100755 > --- a/tools/testing/selftests/livepatch/test-callbacks.sh > +++ b/tools/testing/selftests/livepatch/test-callbacks.sh > @@ -34,9 +34,9 @@ disable_lp $MOD_LIVEPATCH > unload_lp $MOD_LIVEPATCH > unload_mod $MOD_TARGET > > -check_result "% modprobe $MOD_TARGET > +check_result "% insmod test_modules/$MOD_TARGET.ko > $MOD_TARGET: ${MOD_TARGET}_init > -% modprobe $MOD_LIVEPATCH > +% insmod test_modules/$MOD_LIVEPATCH.ko > livepatch: enabling patch '$MOD_LIVEPATCH' > livepatch: '$MOD_LIVEPATCH': initializing patching transition > $MOD_LIVEPATCH: pre_patch_callback: vmlinux > @@ -81,7 +81,7 @@ disable_lp $MOD_LIVEPATCH > unload_lp $MOD_LIVEPATCH > unload_mod $MOD_TARGET > > -check_result "% modprobe $MOD_LIVEPATCH > +check_result "% insmod test_modules/$MOD_LIVEPATCH.ko > livepatch: enabling patch '$MOD_LIVEPATCH' > livepatch: '$MOD_LIVEPATCH': initializing patching transition > $MOD_LIVEPATCH: pre_patch_callback: vmlinux > @@ -89,7 +89,7 @@ livepatch: '$MOD_LIVEPATCH': starting patching transition > livepatch: '$MOD_LIVEPATCH': completing patching transition > $MOD_LIVEPATCH: post_patch_callback: vmlinux > livepatch: '$MOD_LIVEPATCH': patching complete > -% modprobe $MOD_TARGET > +% insmod test_modules/$MOD_TARGET.ko > livepatch: applying patch '$MOD_LIVEPATCH' to loading module '$MOD_TARGET' > $MOD_LIVEPATCH: pre_patch_callback: $MOD_TARGET -> [MODULE_STATE_COMING] Full formed, running module_init > $MOD_LIVEPATCH: post_patch_callback: $MOD_TARGET -> [MODULE_STATE_COMING] Full formed, running module_init > @@ -129,9 +129,9 @@ unload_mod $MOD_TARGET > disable_lp $MOD_LIVEPATCH > unload_lp $MOD_LIVEPATCH > > -check_result "% modprobe $MOD_TARGET > +check_result "% insmod test_modules/$MOD_TARGET.ko > $MOD_TARGET: ${MOD_TARGET}_init > -% modprobe $MOD_LIVEPATCH > +% insmod test_modules/$MOD_LIVEPATCH.ko > livepatch: enabling patch '$MOD_LIVEPATCH' > livepatch: '$MOD_LIVEPATCH': initializing patching transition > $MOD_LIVEPATCH: pre_patch_callback: vmlinux > @@ -177,7 +177,7 @@ unload_mod $MOD_TARGET > disable_lp $MOD_LIVEPATCH > unload_lp $MOD_LIVEPATCH > > -check_result "% modprobe $MOD_LIVEPATCH > +check_result "% insmod test_modules/$MOD_LIVEPATCH.ko > livepatch: enabling patch '$MOD_LIVEPATCH' > livepatch: '$MOD_LIVEPATCH': initializing patching transition > $MOD_LIVEPATCH: pre_patch_callback: vmlinux > @@ -185,7 +185,7 @@ livepatch: '$MOD_LIVEPATCH': starting patching transition > livepatch: '$MOD_LIVEPATCH': completing patching transition > $MOD_LIVEPATCH: post_patch_callback: vmlinux > livepatch: '$MOD_LIVEPATCH': patching complete > -% modprobe $MOD_TARGET > +% insmod test_modules/$MOD_TARGET.ko > livepatch: applying patch '$MOD_LIVEPATCH' to loading module '$MOD_TARGET' > $MOD_LIVEPATCH: pre_patch_callback: $MOD_TARGET -> [MODULE_STATE_COMING] Full formed, running module_init > $MOD_LIVEPATCH: post_patch_callback: $MOD_TARGET -> [MODULE_STATE_COMING] Full formed, running module_init > @@ -219,7 +219,7 @@ load_lp $MOD_LIVEPATCH > disable_lp $MOD_LIVEPATCH > unload_lp $MOD_LIVEPATCH > > -check_result "% modprobe $MOD_LIVEPATCH > +check_result "% insmod test_modules/$MOD_LIVEPATCH.ko > livepatch: enabling patch '$MOD_LIVEPATCH' > livepatch: '$MOD_LIVEPATCH': initializing patching transition > $MOD_LIVEPATCH: pre_patch_callback: vmlinux > @@ -254,9 +254,9 @@ load_mod $MOD_TARGET > load_failing_mod $MOD_LIVEPATCH pre_patch_ret=-19 > unload_mod $MOD_TARGET > > -check_result "% modprobe $MOD_TARGET > +check_result "% insmod test_modules/$MOD_TARGET.ko > $MOD_TARGET: ${MOD_TARGET}_init > -% modprobe $MOD_LIVEPATCH pre_patch_ret=-19 > +% insmod test_modules/$MOD_LIVEPATCH.ko pre_patch_ret=-19 > livepatch: enabling patch '$MOD_LIVEPATCH' > livepatch: '$MOD_LIVEPATCH': initializing patching transition > test_klp_callbacks_demo: pre_patch_callback: vmlinux > @@ -265,7 +265,7 @@ livepatch: failed to enable patch '$MOD_LIVEPATCH' > livepatch: '$MOD_LIVEPATCH': canceling patching transition, going to unpatch > livepatch: '$MOD_LIVEPATCH': completing unpatching transition > livepatch: '$MOD_LIVEPATCH': unpatching complete > -modprobe: ERROR: could not insert '$MOD_LIVEPATCH': No such device > +insmod: ERROR: could not insert module test_modules/$MOD_LIVEPATCH.ko: No such device > % rmmod $MOD_TARGET > $MOD_TARGET: ${MOD_TARGET}_exit" > > @@ -295,7 +295,7 @@ load_failing_mod $MOD_TARGET > disable_lp $MOD_LIVEPATCH > unload_lp $MOD_LIVEPATCH > > -check_result "% modprobe $MOD_LIVEPATCH > +check_result "% insmod test_modules/$MOD_LIVEPATCH.ko > livepatch: enabling patch '$MOD_LIVEPATCH' > livepatch: '$MOD_LIVEPATCH': initializing patching transition > $MOD_LIVEPATCH: pre_patch_callback: vmlinux > @@ -304,12 +304,12 @@ livepatch: '$MOD_LIVEPATCH': completing patching transition > $MOD_LIVEPATCH: post_patch_callback: vmlinux > livepatch: '$MOD_LIVEPATCH': patching complete > % echo -19 > /sys/module/$MOD_LIVEPATCH/parameters/pre_patch_ret > -% modprobe $MOD_TARGET > +% insmod test_modules/$MOD_TARGET.ko > livepatch: applying patch '$MOD_LIVEPATCH' to loading module '$MOD_TARGET' > $MOD_LIVEPATCH: pre_patch_callback: $MOD_TARGET -> [MODULE_STATE_COMING] Full formed, running module_init > livepatch: pre-patch callback failed for object '$MOD_TARGET' > livepatch: patch '$MOD_LIVEPATCH' failed for module '$MOD_TARGET', refusing to load module '$MOD_TARGET' > -modprobe: ERROR: could not insert '$MOD_TARGET': No such device > +insmod: ERROR: could not insert module test_modules/$MOD_TARGET.ko: No such device > % echo 0 > /sys/kernel/livepatch/$MOD_LIVEPATCH/enabled > livepatch: '$MOD_LIVEPATCH': initializing unpatching transition > $MOD_LIVEPATCH: pre_unpatch_callback: vmlinux > @@ -340,11 +340,11 @@ disable_lp $MOD_LIVEPATCH > unload_lp $MOD_LIVEPATCH > unload_mod $MOD_TARGET_BUSY > > -check_result "% modprobe $MOD_TARGET_BUSY block_transition=N > +check_result "% insmod test_modules/$MOD_TARGET_BUSY.ko block_transition=N > $MOD_TARGET_BUSY: ${MOD_TARGET_BUSY}_init > $MOD_TARGET_BUSY: busymod_work_func enter > $MOD_TARGET_BUSY: busymod_work_func exit > -% modprobe $MOD_LIVEPATCH > +% insmod test_modules/$MOD_LIVEPATCH.ko > livepatch: enabling patch '$MOD_LIVEPATCH' > livepatch: '$MOD_LIVEPATCH': initializing patching transition > $MOD_LIVEPATCH: pre_patch_callback: vmlinux > @@ -354,7 +354,7 @@ livepatch: '$MOD_LIVEPATCH': completing patching transition > $MOD_LIVEPATCH: post_patch_callback: vmlinux > $MOD_LIVEPATCH: post_patch_callback: $MOD_TARGET_BUSY -> [MODULE_STATE_LIVE] Normal state > livepatch: '$MOD_LIVEPATCH': patching complete > -% modprobe $MOD_TARGET > +% insmod test_modules/$MOD_TARGET.ko > livepatch: applying patch '$MOD_LIVEPATCH' to loading module '$MOD_TARGET' > $MOD_LIVEPATCH: pre_patch_callback: $MOD_TARGET -> [MODULE_STATE_COMING] Full formed, running module_init > $MOD_LIVEPATCH: post_patch_callback: $MOD_TARGET -> [MODULE_STATE_COMING] Full formed, running module_init > @@ -421,16 +421,16 @@ disable_lp $MOD_LIVEPATCH > unload_lp $MOD_LIVEPATCH > unload_mod $MOD_TARGET_BUSY > > -check_result "% modprobe $MOD_TARGET_BUSY block_transition=Y > +check_result "% insmod test_modules/$MOD_TARGET_BUSY.ko block_transition=Y > $MOD_TARGET_BUSY: ${MOD_TARGET_BUSY}_init > $MOD_TARGET_BUSY: busymod_work_func enter > -% modprobe $MOD_LIVEPATCH > +% insmod test_modules/$MOD_LIVEPATCH.ko > livepatch: enabling patch '$MOD_LIVEPATCH' > livepatch: '$MOD_LIVEPATCH': initializing patching transition > $MOD_LIVEPATCH: pre_patch_callback: vmlinux > $MOD_LIVEPATCH: pre_patch_callback: $MOD_TARGET_BUSY -> [MODULE_STATE_LIVE] Normal state > livepatch: '$MOD_LIVEPATCH': starting patching transition > -% modprobe $MOD_TARGET > +% insmod test_modules/$MOD_TARGET.ko > livepatch: applying patch '$MOD_LIVEPATCH' to loading module '$MOD_TARGET' > $MOD_LIVEPATCH: pre_patch_callback: $MOD_TARGET -> [MODULE_STATE_COMING] Full formed, running module_init > $MOD_TARGET: ${MOD_TARGET}_init > @@ -467,7 +467,7 @@ disable_lp $MOD_LIVEPATCH > unload_lp $MOD_LIVEPATCH2 > unload_lp $MOD_LIVEPATCH > > -check_result "% modprobe $MOD_LIVEPATCH > +check_result "% insmod test_modules/$MOD_LIVEPATCH.ko > livepatch: enabling patch '$MOD_LIVEPATCH' > livepatch: '$MOD_LIVEPATCH': initializing patching transition > $MOD_LIVEPATCH: pre_patch_callback: vmlinux > @@ -475,7 +475,7 @@ livepatch: '$MOD_LIVEPATCH': starting patching transition > livepatch: '$MOD_LIVEPATCH': completing patching transition > $MOD_LIVEPATCH: post_patch_callback: vmlinux > livepatch: '$MOD_LIVEPATCH': patching complete > -% modprobe $MOD_LIVEPATCH2 > +% insmod test_modules/$MOD_LIVEPATCH2.ko > livepatch: enabling patch '$MOD_LIVEPATCH2' > livepatch: '$MOD_LIVEPATCH2': initializing patching transition > $MOD_LIVEPATCH2: pre_patch_callback: vmlinux > @@ -523,7 +523,7 @@ disable_lp $MOD_LIVEPATCH2 > unload_lp $MOD_LIVEPATCH2 > unload_lp $MOD_LIVEPATCH > > -check_result "% modprobe $MOD_LIVEPATCH > +check_result "% insmod test_modules/$MOD_LIVEPATCH.ko > livepatch: enabling patch '$MOD_LIVEPATCH' > livepatch: '$MOD_LIVEPATCH': initializing patching transition > $MOD_LIVEPATCH: pre_patch_callback: vmlinux > @@ -531,7 +531,7 @@ livepatch: '$MOD_LIVEPATCH': starting patching transition > livepatch: '$MOD_LIVEPATCH': completing patching transition > $MOD_LIVEPATCH: post_patch_callback: vmlinux > livepatch: '$MOD_LIVEPATCH': patching complete > -% modprobe $MOD_LIVEPATCH2 replace=1 > +% insmod test_modules/$MOD_LIVEPATCH2.ko replace=1 > livepatch: enabling patch '$MOD_LIVEPATCH2' > livepatch: '$MOD_LIVEPATCH2': initializing patching transition > $MOD_LIVEPATCH2: pre_patch_callback: vmlinux > diff --git a/tools/testing/selftests/livepatch/test-ftrace.sh b/tools/testing/selftests/livepatch/test-ftrace.sh > index 825540a5194d..730218bce99c 100755 > --- a/tools/testing/selftests/livepatch/test-ftrace.sh > +++ b/tools/testing/selftests/livepatch/test-ftrace.sh > @@ -35,7 +35,7 @@ disable_lp $MOD_LIVEPATCH > unload_lp $MOD_LIVEPATCH > > check_result "livepatch: kernel.ftrace_enabled = 0 > -% modprobe $MOD_LIVEPATCH > +% insmod test_modules/$MOD_LIVEPATCH.ko > livepatch: enabling patch '$MOD_LIVEPATCH' > livepatch: '$MOD_LIVEPATCH': initializing patching transition > livepatch: failed to register ftrace handler for function 'cmdline_proc_show' (-16) > @@ -44,9 +44,9 @@ livepatch: failed to enable patch '$MOD_LIVEPATCH' > livepatch: '$MOD_LIVEPATCH': canceling patching transition, going to unpatch > livepatch: '$MOD_LIVEPATCH': completing unpatching transition > livepatch: '$MOD_LIVEPATCH': unpatching complete > -modprobe: ERROR: could not insert '$MOD_LIVEPATCH': Device or resource busy > +insmod: ERROR: could not insert module test_modules/$MOD_LIVEPATCH.ko: Device or resource busy > livepatch: kernel.ftrace_enabled = 1 > -% modprobe $MOD_LIVEPATCH > +% insmod test_modules/$MOD_LIVEPATCH.ko > livepatch: enabling patch '$MOD_LIVEPATCH' > livepatch: '$MOD_LIVEPATCH': initializing patching transition > livepatch: '$MOD_LIVEPATCH': starting patching transition > diff --git a/tools/testing/selftests/livepatch/test-livepatch.sh b/tools/testing/selftests/livepatch/test-livepatch.sh > index 5fe79ac34be1..e3455a6b1158 100755 > --- a/tools/testing/selftests/livepatch/test-livepatch.sh > +++ b/tools/testing/selftests/livepatch/test-livepatch.sh > @@ -31,7 +31,7 @@ if [[ "$(cat /proc/cmdline)" == "$MOD_LIVEPATCH: this has been live patched" ]] > die "livepatch kselftest(s) failed" > fi > > -check_result "% modprobe $MOD_LIVEPATCH > +check_result "% insmod test_modules/$MOD_LIVEPATCH.ko > livepatch: enabling patch '$MOD_LIVEPATCH' > livepatch: '$MOD_LIVEPATCH': initializing patching transition > livepatch: '$MOD_LIVEPATCH': starting patching transition > @@ -75,14 +75,14 @@ unload_lp $MOD_LIVEPATCH > grep 'live patched' /proc/cmdline > /dev/kmsg > grep 'live patched' /proc/meminfo > /dev/kmsg > > -check_result "% modprobe $MOD_LIVEPATCH > +check_result "% insmod test_modules/$MOD_LIVEPATCH.ko > livepatch: enabling patch '$MOD_LIVEPATCH' > livepatch: '$MOD_LIVEPATCH': initializing patching transition > livepatch: '$MOD_LIVEPATCH': starting patching transition > livepatch: '$MOD_LIVEPATCH': completing patching transition > livepatch: '$MOD_LIVEPATCH': patching complete > $MOD_LIVEPATCH: this has been live patched > -% modprobe $MOD_REPLACE replace=0 > +% insmod test_modules/$MOD_REPLACE.ko replace=0 > livepatch: enabling patch '$MOD_REPLACE' > livepatch: '$MOD_REPLACE': initializing patching transition > livepatch: '$MOD_REPLACE': starting patching transition > @@ -135,14 +135,14 @@ unload_lp $MOD_REPLACE > grep 'live patched' /proc/cmdline > /dev/kmsg > grep 'live patched' /proc/meminfo > /dev/kmsg > > -check_result "% modprobe $MOD_LIVEPATCH > +check_result "% insmod test_modules/$MOD_LIVEPATCH.ko > livepatch: enabling patch '$MOD_LIVEPATCH' > livepatch: '$MOD_LIVEPATCH': initializing patching transition > livepatch: '$MOD_LIVEPATCH': starting patching transition > livepatch: '$MOD_LIVEPATCH': completing patching transition > livepatch: '$MOD_LIVEPATCH': patching complete > $MOD_LIVEPATCH: this has been live patched > -% modprobe $MOD_REPLACE replace=1 > +% insmod test_modules/$MOD_REPLACE.ko replace=1 > livepatch: enabling patch '$MOD_REPLACE' > livepatch: '$MOD_REPLACE': initializing patching transition > livepatch: '$MOD_REPLACE': starting patching transition > diff --git a/tools/testing/selftests/livepatch/test-shadow-vars.sh b/tools/testing/selftests/livepatch/test-shadow-vars.sh > index e04cb354f56b..1218c155bffe 100755 > --- a/tools/testing/selftests/livepatch/test-shadow-vars.sh > +++ b/tools/testing/selftests/livepatch/test-shadow-vars.sh > @@ -16,7 +16,7 @@ start_test "basic shadow variable API" > load_mod $MOD_TEST > unload_mod $MOD_TEST > > -check_result "% modprobe $MOD_TEST > +check_result "% insmod test_modules/$MOD_TEST.ko > $MOD_TEST: klp_shadow_get(obj=PTR1, id=0x1234) = PTR0 > $MOD_TEST: got expected NULL result > $MOD_TEST: shadow_ctor: PTR3 -> PTR2 > diff --git a/tools/testing/selftests/livepatch/test-state.sh b/tools/testing/selftests/livepatch/test-state.sh > index 38656721c958..10a52ac06185 100755 > --- a/tools/testing/selftests/livepatch/test-state.sh > +++ b/tools/testing/selftests/livepatch/test-state.sh > @@ -19,7 +19,7 @@ load_lp $MOD_LIVEPATCH > disable_lp $MOD_LIVEPATCH > unload_lp $MOD_LIVEPATCH > > -check_result "% modprobe $MOD_LIVEPATCH > +check_result "% insmod test_modules/$MOD_LIVEPATCH.ko > livepatch: enabling patch '$MOD_LIVEPATCH' > livepatch: '$MOD_LIVEPATCH': initializing patching transition > $MOD_LIVEPATCH: pre_patch_callback: vmlinux > @@ -51,7 +51,7 @@ unload_lp $MOD_LIVEPATCH > disable_lp $MOD_LIVEPATCH2 > unload_lp $MOD_LIVEPATCH2 > > -check_result "% modprobe $MOD_LIVEPATCH > +check_result "% insmod test_modules/$MOD_LIVEPATCH.ko > livepatch: enabling patch '$MOD_LIVEPATCH' > livepatch: '$MOD_LIVEPATCH': initializing patching transition > $MOD_LIVEPATCH: pre_patch_callback: vmlinux > @@ -61,7 +61,7 @@ livepatch: '$MOD_LIVEPATCH': completing patching transition > $MOD_LIVEPATCH: post_patch_callback: vmlinux > $MOD_LIVEPATCH: fix_console_loglevel: fixing console_loglevel > livepatch: '$MOD_LIVEPATCH': patching complete > -% modprobe $MOD_LIVEPATCH2 > +% insmod test_modules/$MOD_LIVEPATCH2.ko > livepatch: enabling patch '$MOD_LIVEPATCH2' > livepatch: '$MOD_LIVEPATCH2': initializing patching transition > $MOD_LIVEPATCH2: pre_patch_callback: vmlinux > @@ -96,7 +96,7 @@ disable_lp $MOD_LIVEPATCH2 > unload_lp $MOD_LIVEPATCH2 > unload_lp $MOD_LIVEPATCH3 > > -check_result "% modprobe $MOD_LIVEPATCH2 > +check_result "% insmod test_modules/$MOD_LIVEPATCH2.ko > livepatch: enabling patch '$MOD_LIVEPATCH2' > livepatch: '$MOD_LIVEPATCH2': initializing patching transition > $MOD_LIVEPATCH2: pre_patch_callback: vmlinux > @@ -106,7 +106,7 @@ livepatch: '$MOD_LIVEPATCH2': completing patching transition > $MOD_LIVEPATCH2: post_patch_callback: vmlinux > $MOD_LIVEPATCH2: fix_console_loglevel: fixing console_loglevel > livepatch: '$MOD_LIVEPATCH2': patching complete > -% modprobe $MOD_LIVEPATCH3 > +% insmod test_modules/$MOD_LIVEPATCH3.ko > livepatch: enabling patch '$MOD_LIVEPATCH3' > livepatch: '$MOD_LIVEPATCH3': initializing patching transition > $MOD_LIVEPATCH3: pre_patch_callback: vmlinux > @@ -117,7 +117,7 @@ $MOD_LIVEPATCH3: post_patch_callback: vmlinux > $MOD_LIVEPATCH3: fix_console_loglevel: taking over the console_loglevel change > livepatch: '$MOD_LIVEPATCH3': patching complete > % rmmod $MOD_LIVEPATCH2 > -% modprobe $MOD_LIVEPATCH2 > +% insmod test_modules/$MOD_LIVEPATCH2.ko > livepatch: enabling patch '$MOD_LIVEPATCH2' > livepatch: '$MOD_LIVEPATCH2': initializing patching transition > $MOD_LIVEPATCH2: pre_patch_callback: vmlinux > @@ -149,7 +149,7 @@ load_failing_mod $MOD_LIVEPATCH > disable_lp $MOD_LIVEPATCH2 > unload_lp $MOD_LIVEPATCH2 > > -check_result "% modprobe $MOD_LIVEPATCH2 > +check_result "% insmod test_modules/$MOD_LIVEPATCH2.ko > livepatch: enabling patch '$MOD_LIVEPATCH2' > livepatch: '$MOD_LIVEPATCH2': initializing patching transition > $MOD_LIVEPATCH2: pre_patch_callback: vmlinux > @@ -159,9 +159,9 @@ livepatch: '$MOD_LIVEPATCH2': completing patching transition > $MOD_LIVEPATCH2: post_patch_callback: vmlinux > $MOD_LIVEPATCH2: fix_console_loglevel: fixing console_loglevel > livepatch: '$MOD_LIVEPATCH2': patching complete > -% modprobe $MOD_LIVEPATCH > +% insmod test_modules/$MOD_LIVEPATCH.ko > livepatch: Livepatch patch ($MOD_LIVEPATCH) is not compatible with the already installed livepatches. > -modprobe: ERROR: could not insert '$MOD_LIVEPATCH': Invalid argument > +insmod: ERROR: could not insert module test_modules/$MOD_LIVEPATCH.ko: Invalid parameters > % echo 0 > /sys/kernel/livepatch/$MOD_LIVEPATCH2/enabled > livepatch: '$MOD_LIVEPATCH2': initializing unpatching transition > $MOD_LIVEPATCH2: pre_unpatch_callback: vmlinux > diff --git a/tools/testing/selftests/livepatch/test-sysfs.sh b/tools/testing/selftests/livepatch/test-sysfs.sh > index 7f76f280189a..6c646afa7395 100755 > --- a/tools/testing/selftests/livepatch/test-sysfs.sh > +++ b/tools/testing/selftests/livepatch/test-sysfs.sh > @@ -27,7 +27,7 @@ disable_lp $MOD_LIVEPATCH > > unload_lp $MOD_LIVEPATCH > > -check_result "% modprobe $MOD_LIVEPATCH > +check_result "% insmod test_modules/$MOD_LIVEPATCH.ko > livepatch: enabling patch '$MOD_LIVEPATCH' > livepatch: '$MOD_LIVEPATCH': initializing patching transition > livepatch: '$MOD_LIVEPATCH': starting patching transition > @@ -56,7 +56,7 @@ check_sysfs_value "$MOD_LIVEPATCH" "$MOD_TARGET/patched" "0" > disable_lp $MOD_LIVEPATCH > unload_lp $MOD_LIVEPATCH > > -check_result "% modprobe test_klp_callbacks_demo > +check_result "% insmod test_modules/test_klp_callbacks_demo.ko > livepatch: enabling patch 'test_klp_callbacks_demo' > livepatch: 'test_klp_callbacks_demo': initializing patching transition > test_klp_callbacks_demo: pre_patch_callback: vmlinux > @@ -64,7 +64,7 @@ livepatch: 'test_klp_callbacks_demo': starting patching transition > livepatch: 'test_klp_callbacks_demo': completing patching transition > test_klp_callbacks_demo: post_patch_callback: vmlinux > livepatch: 'test_klp_callbacks_demo': patching complete > -% modprobe test_klp_callbacks_mod > +% insmod test_modules/test_klp_callbacks_mod.ko > livepatch: applying patch 'test_klp_callbacks_demo' to loading module 'test_klp_callbacks_mod' > test_klp_callbacks_demo: pre_patch_callback: test_klp_callbacks_mod -> [MODULE_STATE_COMING] Full formed, running module_init > test_klp_callbacks_demo: post_patch_callback: test_klp_callbacks_mod -> [MODULE_STATE_COMING] Full formed, running module_init > diff --git a/tools/testing/selftests/livepatch/test_modules/Makefile b/tools/testing/selftests/livepatch/test_modules/Makefile > new file mode 100644 > index 000000000000..6f7c2103d27d > --- /dev/null > +++ b/tools/testing/selftests/livepatch/test_modules/Makefile > @@ -0,0 +1,19 @@ > +TESTMODS_DIR := $(realpath $(dir $(abspath $(lastword $(MAKEFILE_LIST))))) > +KDIR ?= /lib/modules/$(shell uname -r)/build > + > +obj-m += test_klp_atomic_replace.o \ > + test_klp_callbacks_busy.o \ > + test_klp_callbacks_demo.o \ > + test_klp_callbacks_demo2.o \ > + test_klp_callbacks_mod.o \ > + test_klp_livepatch.o \ > + test_klp_state.o \ > + test_klp_state2.o \ > + test_klp_state3.o \ > + test_klp_shadow_vars.o > + > +modules: > + $(Q)$(MAKE) -C $(KDIR) modules KBUILD_EXTMOD=$(TESTMODS_DIR) > + > +clean: > + $(Q)$(MAKE) -C $(KDIR) clean KBUILD_EXTMOD=$(TESTMODS_DIR) > diff --git a/lib/livepatch/test_klp_atomic_replace.c b/tools/testing/selftests/livepatch/test_modules/test_klp_atomic_replace.c > similarity index 100% > rename from lib/livepatch/test_klp_atomic_replace.c > rename to tools/testing/selftests/livepatch/test_modules/test_klp_atomic_replace.c > diff --git a/lib/livepatch/test_klp_callbacks_busy.c b/tools/testing/selftests/livepatch/test_modules/test_klp_callbacks_busy.c > similarity index 100% > rename from lib/livepatch/test_klp_callbacks_busy.c > rename to tools/testing/selftests/livepatch/test_modules/test_klp_callbacks_busy.c > diff --git a/lib/livepatch/test_klp_callbacks_demo.c b/tools/testing/selftests/livepatch/test_modules/test_klp_callbacks_demo.c > similarity index 100% > rename from lib/livepatch/test_klp_callbacks_demo.c > rename to tools/testing/selftests/livepatch/test_modules/test_klp_callbacks_demo.c > diff --git a/lib/livepatch/test_klp_callbacks_demo2.c b/tools/testing/selftests/livepatch/test_modules/test_klp_callbacks_demo2.c > similarity index 100% > rename from lib/livepatch/test_klp_callbacks_demo2.c > rename to tools/testing/selftests/livepatch/test_modules/test_klp_callbacks_demo2.c > diff --git a/lib/livepatch/test_klp_callbacks_mod.c b/tools/testing/selftests/livepatch/test_modules/test_klp_callbacks_mod.c > similarity index 100% > rename from lib/livepatch/test_klp_callbacks_mod.c > rename to tools/testing/selftests/livepatch/test_modules/test_klp_callbacks_mod.c > diff --git a/lib/livepatch/test_klp_livepatch.c b/tools/testing/selftests/livepatch/test_modules/test_klp_livepatch.c > similarity index 100% > rename from lib/livepatch/test_klp_livepatch.c > rename to tools/testing/selftests/livepatch/test_modules/test_klp_livepatch.c > diff --git a/lib/livepatch/test_klp_shadow_vars.c b/tools/testing/selftests/livepatch/test_modules/test_klp_shadow_vars.c > similarity index 100% > rename from lib/livepatch/test_klp_shadow_vars.c > rename to tools/testing/selftests/livepatch/test_modules/test_klp_shadow_vars.c > diff --git a/lib/livepatch/test_klp_state.c b/tools/testing/selftests/livepatch/test_modules/test_klp_state.c > similarity index 100% > rename from lib/livepatch/test_klp_state.c > rename to tools/testing/selftests/livepatch/test_modules/test_klp_state.c > diff --git a/lib/livepatch/test_klp_state2.c b/tools/testing/selftests/livepatch/test_modules/test_klp_state2.c > similarity index 100% > rename from lib/livepatch/test_klp_state2.c > rename to tools/testing/selftests/livepatch/test_modules/test_klp_state2.c > diff --git a/lib/livepatch/test_klp_state3.c b/tools/testing/selftests/livepatch/test_modules/test_klp_state3.c > similarity index 100% > rename from lib/livepatch/test_klp_state3.c > rename to tools/testing/selftests/livepatch/test_modules/test_klp_state3.c > > -- > 2.42.0 >
On Fri, 1 Dec 2023, Joe Lawrence wrote: > On Tue, Oct 31, 2023 at 06:10:52PM -0300, Marcos Paulo de Souza wrote: > > The modules are being moved from lib/livepatch to > > tools/testing/selftests/livepatch/test_modules. > > > > This code moving will allow writing more complex tests, like for example an > > userspace C code that will call a livepatched kernel function. > > > > The modules are now built as out-of-tree > > modules, but being part of the kernel source means they will be maintained. > > > > Another advantage of the code moving is to be able to easily change, > > debug and rebuild the tests by running make on the selftests/livepatch directory, > > which is not currently possible since the modules on lib/livepatch are > > build and installed using the "modules" target. > > > > The current approach also keeps the ability to execute the tests manually by > > executing the scripts inside selftests/livepatch directory, as it's currently > > supported. If the modules are modified, they needed to be rebuilt before running > > the scripts though. > > > > The modules are built before running the selftests when using the > > kselftest invocations: > > > > make kselftest TARGETS=livepatch > > or > > make -C tools/testing/selftests/livepatch run_tests > > > > Quick question: > > - We have been building with CONFIG_LIVEPATCH_TEST=m to generate the > test modules at kernel build time > > - Our packaging filters out the selftest scripts and supporting modules > from the general kernel RPM package into their subpackages > > - Tests are run as part of CKI or other manual tests by installing the > pre-built packages from the previous step > > > After this patch, we would need to add something like the following to > our kernel build, before packaging: > > $ make KDIR=$(pwd) -C tools/testing/selftests/livepatch/ > ^^^^ > > If this is the correct way to build the test modules for *this* tree and > /lib/modules/$(shell uname -r)/build... it might be useful to document > in the commit message as an alternative use case. So if I understand it correctly, you would like to stick to pre-building the modules (not in-tree but now after the kernel is build using the proposed way), package them and then install everything on a system running the respective kernel. A valid use case in my opinion. My idea is to abandon this way completely, take the selftests and build and run them on the system right away. Both should be doable, hopefully, if we wire it all correctly... and document it. Miroslav
On 12/6/23 10:05, Miroslav Benes wrote: > On Fri, 1 Dec 2023, Joe Lawrence wrote: > >> On Tue, Oct 31, 2023 at 06:10:52PM -0300, Marcos Paulo de Souza wrote: >>> The modules are being moved from lib/livepatch to >>> tools/testing/selftests/livepatch/test_modules. >>> >>> This code moving will allow writing more complex tests, like for example an >>> userspace C code that will call a livepatched kernel function. >>> >>> The modules are now built as out-of-tree >>> modules, but being part of the kernel source means they will be maintained. >>> >>> Another advantage of the code moving is to be able to easily change, >>> debug and rebuild the tests by running make on the selftests/livepatch directory, >>> which is not currently possible since the modules on lib/livepatch are >>> build and installed using the "modules" target. >>> >>> The current approach also keeps the ability to execute the tests manually by >>> executing the scripts inside selftests/livepatch directory, as it's currently >>> supported. If the modules are modified, they needed to be rebuilt before running >>> the scripts though. >>> >>> The modules are built before running the selftests when using the >>> kselftest invocations: >>> >>> make kselftest TARGETS=livepatch >>> or >>> make -C tools/testing/selftests/livepatch run_tests >>> >> >> Quick question: >> >> - We have been building with CONFIG_LIVEPATCH_TEST=m to generate the >> test modules at kernel build time >> >> - Our packaging filters out the selftest scripts and supporting modules >> from the general kernel RPM package into their subpackages >> >> - Tests are run as part of CKI or other manual tests by installing the >> pre-built packages from the previous step >> >> >> After this patch, we would need to add something like the following to >> our kernel build, before packaging: >> >> $ make KDIR=$(pwd) -C tools/testing/selftests/livepatch/ >> ^^^^ >> >> If this is the correct way to build the test modules for *this* tree and >> /lib/modules/$(shell uname -r)/build... it might be useful to document >> in the commit message as an alternative use case. > > So if I understand it correctly, you would like to stick to pre-building > the modules (not in-tree but now after the kernel is build using the > proposed way), package them and then install everything on a system > running the respective kernel. A valid use case in my opinion. > That would accurate. If this use case can be supported, it wouldn't require changes to our CKI / testing scripts, only the post-build packaging bits. > My idea is to abandon this way completely, take the selftests and build > and run them on the system right away. > > Both should be doable, hopefully, if we wire it all correctly... and > document it. > I can't think of why it shouldn't continue to work, even in a future where newer livepatching selftests support older kernels. (We would just have newer selftests sources backported to test older kernel sources.) Are there any test cases which truly need to be build on-the-fly? Aside from testing different toolchain pieces?
On Thu, 2023-12-07 at 10:20 -0500, Joe Lawrence wrote: > On 12/6/23 10:05, Miroslav Benes wrote: > > On Fri, 1 Dec 2023, Joe Lawrence wrote: > > > > > On Tue, Oct 31, 2023 at 06:10:52PM -0300, Marcos Paulo de Souza > > > wrote: > > > > The modules are being moved from lib/livepatch to > > > > tools/testing/selftests/livepatch/test_modules. > > > > > > > > This code moving will allow writing more complex tests, like > > > > for example an > > > > userspace C code that will call a livepatched kernel function. > > > > > > > > The modules are now built as out-of-tree > > > > modules, but being part of the kernel source means they will be > > > > maintained. > > > > > > > > Another advantage of the code moving is to be able to easily > > > > change, > > > > debug and rebuild the tests by running make on the > > > > selftests/livepatch directory, > > > > which is not currently possible since the modules on > > > > lib/livepatch are > > > > build and installed using the "modules" target. > > > > > > > > The current approach also keeps the ability to execute the > > > > tests manually by > > > > executing the scripts inside selftests/livepatch directory, as > > > > it's currently > > > > supported. If the modules are modified, they needed to be > > > > rebuilt before running > > > > the scripts though. > > > > > > > > The modules are built before running the selftests when using > > > > the > > > > kselftest invocations: > > > > > > > > make kselftest TARGETS=livepatch > > > > or > > > > make -C tools/testing/selftests/livepatch run_tests > > > > > > > > > > Quick question: > > > > > > - We have been building with CONFIG_LIVEPATCH_TEST=m to generate > > > the > > > test modules at kernel build time > > > > > > - Our packaging filters out the selftest scripts and supporting > > > modules > > > from the general kernel RPM package into their subpackages > > > > > > - Tests are run as part of CKI or other manual tests by > > > installing the > > > pre-built packages from the previous step > > > > > > > > > After this patch, we would need to add something like the > > > following to > > > our kernel build, before packaging: > > > > > > $ make KDIR=$(pwd) -C tools/testing/selftests/livepatch/ > > > ^^^^ > > > > > > If this is the correct way to build the test modules for *this* > > > tree and > > > /lib/modules/$(shell uname -r)/build... it might be useful to > > > document > > > in the commit message as an alternative use case. That's right: $ make -C tools/testing/selftests/livepatch/ is indeed the way to build the tests without running them. KDIR will be set to /lib/modules/$(shell uname -r)/build is empty. Yes, I can definitely add documentation about it inside the tools/testing/selftests/livepatch/README. > > > > So if I understand it correctly, you would like to stick to pre- > > building > > the modules (not in-tree but now after the kernel is build using > > the > > proposed way), package them and then install everything on a system > > running the respective kernel. A valid use case in my opinion. > > > > That would accurate. If this use case can be supported, it wouldn't > require changes to our CKI / testing scripts, only the post-build > packaging bits. > > > My idea is to abandon this way completely, take the selftests and > > build > > and run them on the system right away. > > > > Both should be doable, hopefully, if we wire it all correctly... > > and > > document it. > > > I can't think of why it shouldn't continue to work, even in a future > where newer livepatching selftests support older kernels. (We would > just have newer selftests sources backported to test older kernel > sources.) > > Are there any test cases which truly need to be build on-the-fly? > Aside > from testing different toolchain pieces? We would like to use the same selftests to trigger testing on different kernels (adjusting it when necessary as you stated), without having to rebuild the kernel. Miroslav may have other ideias about it too, IIRC. >
> > My idea is to abandon this way completely, take the selftests and build > > and run them on the system right away. > > > > Both should be doable, hopefully, if we wire it all correctly... and > > document it. > > > I can't think of why it shouldn't continue to work, even in a future > where newer livepatching selftests support older kernels. (We would > just have newer selftests sources backported to test older kernel sources.) > > Are there any test cases which truly need to be build on-the-fly? Aside > from testing different toolchain pieces? https://github.com/SUSE/qa_test_klp is what we would like to migrate to selftests to have just one place for all tests. There is basically just one live patch template and one supporting kernel module template which is livepatched. The final result is driven by a set of macros and function parameters. In some cases more modules are compiled as parts of a test in a loop. However, I do not think there is anything which truly needs to be built on-the-fly in the end. Everything can be worked around. Templates may be abandoned and we would have a live patch and a module(s) per test. Some tests are probably not worth it and may be removed. So it is a question of convenience and maintainability. When we, for example, simplified API and klp_register_patch() was removed, only one place needed to be amended. Also, the current state in lib/livepatch/ could be simplified with the proposed infrastructure as some files could be merged together. Miroslav
On Fri 2023-12-08 09:06:30, Miroslav Benes wrote: > > > My idea is to abandon this way completely, take the selftests and build > > > and run them on the system right away. > > > > > > Both should be doable, hopefully, if we wire it all correctly... and > > > document it. > > > > > I can't think of why it shouldn't continue to work, even in a future > > where newer livepatching selftests support older kernels. (We would > > just have newer selftests sources backported to test older kernel sources.) > > > > Are there any test cases which truly need to be build on-the-fly? Aside > > from testing different toolchain pieces? > > https://github.com/SUSE/qa_test_klp is what we would like to migrate to > selftests to have just one place for all tests. > > There is basically just one live patch template and one supporting kernel > module template which is livepatched. The final result is driven by a set > of macros and function parameters. In some cases more modules are compiled > as parts of a test in a loop. > > However, I do not think there is anything which truly needs to be built > on-the-fly in the end. Everything can be worked around. Templates may be > abandoned and we would have a live patch and a module(s) per test. Some > tests are probably not worth it and may be removed. So it is a question of > convenience and maintainability. When we, for example, simplified API and > klp_register_patch() was removed, only one place needed to be amended. > Also, the current state in lib/livepatch/ could be simplified with the > proposed infrastructure as some files could be merged together. In the patchset reworking livepatch states, I solved this problem by including the same sources in another module source, like: $> cat lib/livepatch/test_klp_speaker_livepatch2.c // SPDX-License-Identifier: GPL-2.0 // Copyright (C) 2023 SUSE /* Same livepatch with the same features. */ #include "test_klp_speaker_livepatch.c" ========= $> cat lib/livepatch/test_klp_speaker2.c // SPDX-License-Identifier: GPL-2.0 // Copyright (C) 2023 SUSE /* Use versioned function name for livepatched functions */ #define _VER_NAME(name) name ## 2 /* Same module with the same features. */ #include "test_klp_speaker.c" ========== And the behavior was changed by module parameters. The test lookes like: $> cat tools/testing/selftests/livepatch/test-modules.sh [...] start_test "multiple target modules" load_mod $MOD_TARGET read_module_param $MOD_TARGET welcome load_lp $MOD_LIVEPATCH add_applause=1 read_module_param $MOD_TARGET welcome load_mod $MOD_TARGET2 read_module_param $MOD_TARGET2 welcome unload_mod $MOD_TARGET2 disable_lp $MOD_LIVEPATCH read_module_param $MOD_TARGET welcome unload_lp $MOD_LIVEPATCH unload_mod $MOD_TARGET =========== It is a kind of hack. But it would allow to build and package the test modules. It has several advantages: + Less modules are needed. The behavior is modified by the parameters. + The separate parameters are easier to parse in compare with embedding the behavior into the module name. + Build problems would be solved before the packages reach QA department + The package would have lightweight dependencies. + Running the tests would be faster. Regarding disadvantages: + The source included in all the other variants would be more complex. But the same would happen when building the modules during the tests. It would also require a more complicated template and an extra script generating the particular module sources. I personally prefer the solution with "#include" because it has all the mentioned advantages. The "#include" is a hack but it is needed only when we need more modules with all the features. Best Regards, Petr
On 12/7/23 12:19, mpdesouza@suse.com wrote: > On Thu, 2023-12-07 at 10:20 -0500, Joe Lawrence wrote: >> On 12/6/23 10:05, Miroslav Benes wrote: >>> On Fri, 1 Dec 2023, Joe Lawrence wrote: >>> >>>> On Tue, Oct 31, 2023 at 06:10:52PM -0300, Marcos Paulo de Souza >>>> wrote: >>>>> The modules are being moved from lib/livepatch to >>>>> tools/testing/selftests/livepatch/test_modules. >>>>> >>>>> This code moving will allow writing more complex tests, like >>>>> for example an >>>>> userspace C code that will call a livepatched kernel function. >>>>> >>>>> The modules are now built as out-of-tree >>>>> modules, but being part of the kernel source means they will be >>>>> maintained. >>>>> >>>>> Another advantage of the code moving is to be able to easily >>>>> change, >>>>> debug and rebuild the tests by running make on the >>>>> selftests/livepatch directory, >>>>> which is not currently possible since the modules on >>>>> lib/livepatch are >>>>> build and installed using the "modules" target. >>>>> >>>>> The current approach also keeps the ability to execute the >>>>> tests manually by >>>>> executing the scripts inside selftests/livepatch directory, as >>>>> it's currently >>>>> supported. If the modules are modified, they needed to be >>>>> rebuilt before running >>>>> the scripts though. >>>>> >>>>> The modules are built before running the selftests when using >>>>> the >>>>> kselftest invocations: >>>>> >>>>> make kselftest TARGETS=livepatch >>>>> or >>>>> make -C tools/testing/selftests/livepatch run_tests >>>>> >>>> >>>> Quick question: >>>> >>>> - We have been building with CONFIG_LIVEPATCH_TEST=m to generate >>>> the >>>> test modules at kernel build time >>>> >>>> - Our packaging filters out the selftest scripts and supporting >>>> modules >>>> from the general kernel RPM package into their subpackages >>>> >>>> - Tests are run as part of CKI or other manual tests by >>>> installing the >>>> pre-built packages from the previous step >>>> >>>> >>>> After this patch, we would need to add something like the >>>> following to >>>> our kernel build, before packaging: >>>> >>>> $ make KDIR=$(pwd) -C tools/testing/selftests/livepatch/ >>>> ^^^^ >>>> >>>> If this is the correct way to build the test modules for *this* >>>> tree and >>>> /lib/modules/$(shell uname -r)/build... it might be useful to >>>> document >>>> in the commit message as an alternative use case. > > That's right: > > $ make -C tools/testing/selftests/livepatch/ > > is indeed the way to build the tests without running them. KDIR will be > set to /lib/modules/$(shell uname -r)/build is empty. > > Yes, I can definitely add documentation about it inside the > tools/testing/selftests/livepatch/README. > How does the default kselftest run work with these changes? make ksefltest - does this still work as it did before this change? thanks, -- Shuah
On Mon, 2023-12-11 at 14:56 -0700, Shuah Khan wrote: > On 12/7/23 12:19, mpdesouza@suse.com wrote: > > On Thu, 2023-12-07 at 10:20 -0500, Joe Lawrence wrote: > > > On 12/6/23 10:05, Miroslav Benes wrote: > > > > On Fri, 1 Dec 2023, Joe Lawrence wrote: > > > > > > > > > On Tue, Oct 31, 2023 at 06:10:52PM -0300, Marcos Paulo de > > > > > Souza > > > > > wrote: > > > > > > The modules are being moved from lib/livepatch to > > > > > > tools/testing/selftests/livepatch/test_modules. > > > > > > > > > > > > This code moving will allow writing more complex tests, > > > > > > like > > > > > > for example an > > > > > > userspace C code that will call a livepatched kernel > > > > > > function. > > > > > > > > > > > > The modules are now built as out-of-tree > > > > > > modules, but being part of the kernel source means they > > > > > > will be > > > > > > maintained. > > > > > > > > > > > > Another advantage of the code moving is to be able to > > > > > > easily > > > > > > change, > > > > > > debug and rebuild the tests by running make on the > > > > > > selftests/livepatch directory, > > > > > > which is not currently possible since the modules on > > > > > > lib/livepatch are > > > > > > build and installed using the "modules" target. > > > > > > > > > > > > The current approach also keeps the ability to execute the > > > > > > tests manually by > > > > > > executing the scripts inside selftests/livepatch directory, > > > > > > as > > > > > > it's currently > > > > > > supported. If the modules are modified, they needed to be > > > > > > rebuilt before running > > > > > > the scripts though. > > > > > > > > > > > > The modules are built before running the selftests when > > > > > > using > > > > > > the > > > > > > kselftest invocations: > > > > > > > > > > > > make kselftest TARGETS=livepatch > > > > > > or > > > > > > make -C tools/testing/selftests/livepatch > > > > > > run_tests > > > > > > > > > > > > > > > > Quick question: > > > > > > > > > > - We have been building with CONFIG_LIVEPATCH_TEST=m to > > > > > generate > > > > > the > > > > > test modules at kernel build time > > > > > > > > > > - Our packaging filters out the selftest scripts and > > > > > supporting > > > > > modules > > > > > from the general kernel RPM package into their subpackages > > > > > > > > > > - Tests are run as part of CKI or other manual tests by > > > > > installing the > > > > > pre-built packages from the previous step > > > > > > > > > > > > > > > After this patch, we would need to add something like the > > > > > following to > > > > > our kernel build, before packaging: > > > > > > > > > > $ make KDIR=$(pwd) -C tools/testing/selftests/livepatch/ > > > > > ^^^^ > > > > > > > > > > If this is the correct way to build the test modules for > > > > > *this* > > > > > tree and > > > > > /lib/modules/$(shell uname -r)/build... it might be useful to > > > > > document > > > > > in the commit message as an alternative use case. > > > > That's right: > > > > $ make -C tools/testing/selftests/livepatch/ > > > > is indeed the way to build the tests without running them. KDIR > > will be > > set to /lib/modules/$(shell uname -r)/build is empty. > > > > Yes, I can definitely add documentation about it inside the > > tools/testing/selftests/livepatch/README. > > > > How does the default kselftest run work with these changes? > > make ksefltest - does this still work as it did before this change? Yes, make kselftest TARGETS=livepatch works the same as before. As well the make -C tools/testing/selftests/livepatch run_tests Both ways work as before. > > thanks, > -- Shuah >
diff --git a/arch/s390/configs/debug_defconfig b/arch/s390/configs/debug_defconfig index 438cd92e6080..9672b9f31710 100644 --- a/arch/s390/configs/debug_defconfig +++ b/arch/s390/configs/debug_defconfig @@ -885,4 +885,3 @@ CONFIG_ATOMIC64_SELFTEST=y CONFIG_STRING_SELFTEST=y CONFIG_TEST_BITOPS=m CONFIG_TEST_BPF=m -CONFIG_TEST_LIVEPATCH=m diff --git a/arch/s390/configs/defconfig b/arch/s390/configs/defconfig index 1b8150e50f6a..a8a66264a72d 100644 --- a/arch/s390/configs/defconfig +++ b/arch/s390/configs/defconfig @@ -813,4 +813,3 @@ CONFIG_KPROBES_SANITY_TEST=m CONFIG_PERCPU_TEST=m CONFIG_ATOMIC64_SELFTEST=y CONFIG_TEST_BPF=m -CONFIG_TEST_LIVEPATCH=m diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index fa307f93fa2e..af67c5f5d031 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -2862,28 +2862,6 @@ config TEST_MEMCAT_P If unsure, say N. -config TEST_LIVEPATCH - tristate "Test livepatching" - default n - depends on DYNAMIC_DEBUG - depends on LIVEPATCH - depends on m - help - Test kernel livepatching features for correctness. The tests will - load test modules that will be livepatched in various scenarios. - - To run all the livepatching tests: - - make -C tools/testing/selftests TARGETS=livepatch run_tests - - Alternatively, individual tests may be invoked: - - tools/testing/selftests/livepatch/test-callbacks.sh - tools/testing/selftests/livepatch/test-livepatch.sh - tools/testing/selftests/livepatch/test-shadow-vars.sh - - If unsure, say N. - config TEST_OBJAGG tristate "Perform selftest on object aggreration manager" default n diff --git a/lib/Makefile b/lib/Makefile index 740109b6e2c8..b96b280787ca 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -132,8 +132,6 @@ endif obj-$(CONFIG_TEST_FPU) += test_fpu.o CFLAGS_test_fpu.o += $(FPU_CFLAGS) -obj-$(CONFIG_TEST_LIVEPATCH) += livepatch/ - # Some KUnit files (hooks.o) need to be built-in even when KUnit is a module, # so we can't just use obj-$(CONFIG_KUNIT). ifdef CONFIG_KUNIT diff --git a/lib/livepatch/Makefile b/lib/livepatch/Makefile deleted file mode 100644 index dcc912b3478f..000000000000 --- a/lib/livepatch/Makefile +++ /dev/null @@ -1,14 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Makefile for livepatch test code. - -obj-$(CONFIG_TEST_LIVEPATCH) += test_klp_atomic_replace.o \ - test_klp_callbacks_demo.o \ - test_klp_callbacks_demo2.o \ - test_klp_callbacks_busy.o \ - test_klp_callbacks_mod.o \ - test_klp_livepatch.o \ - test_klp_shadow_vars.o \ - test_klp_state.o \ - test_klp_state2.o \ - test_klp_state3.o diff --git a/tools/testing/selftests/livepatch/Makefile b/tools/testing/selftests/livepatch/Makefile index 02fadc9d55e0..119e2bbebe5d 100644 --- a/tools/testing/selftests/livepatch/Makefile +++ b/tools/testing/selftests/livepatch/Makefile @@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 +TEST_GEN_MODS_DIR := test_modules TEST_PROGS_EXTENDED := functions.sh TEST_PROGS := \ test-livepatch.sh \ diff --git a/tools/testing/selftests/livepatch/README b/tools/testing/selftests/livepatch/README index 0942dd5826f8..c5eb3cb67b66 100644 --- a/tools/testing/selftests/livepatch/README +++ b/tools/testing/selftests/livepatch/README @@ -13,23 +13,26 @@ the message buffer for only the duration of each individual test.) Config ------ -Set these config options and their prerequisites: - -CONFIG_LIVEPATCH=y -CONFIG_TEST_LIVEPATCH=m +Set CONFIG_LIVEPATCH=y option and it's prerequisites. Running the tests ----------------- -Test kernel modules are built as part of lib/ (make modules) and need to -be installed (make modules_install) as the test scripts will modprobe -them. +Test kernel modules are built before running the livepatch selftests. The +modules are located under test_modules directory, and are built as out-of-tree +modules. This is specially useful since the same sources can be built and +tested on systems with different kABI, ensuring they the tests are backwards +compatible. The modules will be loaded by the test scripts using insmod. To run the livepatch selftests, from the top of the kernel source tree: % make -C tools/testing/selftests TARGETS=livepatch run_tests +or + + % make kselftest TARGETS=livepatch + Adding tests ------------ diff --git a/tools/testing/selftests/livepatch/config b/tools/testing/selftests/livepatch/config index ad23100cb27c..e88bf518a23a 100644 --- a/tools/testing/selftests/livepatch/config +++ b/tools/testing/selftests/livepatch/config @@ -1,3 +1,2 @@ CONFIG_LIVEPATCH=y CONFIG_DYNAMIC_DEBUG=y -CONFIG_TEST_LIVEPATCH=m diff --git a/tools/testing/selftests/livepatch/functions.sh b/tools/testing/selftests/livepatch/functions.sh index c8416c54b463..e60cf09491a6 100644 --- a/tools/testing/selftests/livepatch/functions.sh +++ b/tools/testing/selftests/livepatch/functions.sh @@ -127,16 +127,14 @@ function loop_until() { done } -function assert_mod() { - local mod="$1" - - modprobe --dry-run "$mod" &>/dev/null -} - function is_livepatch_mod() { local mod="$1" - if [[ $(modinfo "$mod" | awk '/^livepatch:/{print $NF}') == "Y" ]]; then + if [[ ! -f "test_modules/$mod.ko" ]]; then + die "Can't find \"test_modules/$mod.ko\", try \"make\"" + fi + + if [[ $(modinfo "test_modules/$mod.ko" | awk '/^livepatch:/{print $NF}') == "Y" ]]; then return 0 fi @@ -146,9 +144,9 @@ function is_livepatch_mod() { function __load_mod() { local mod="$1"; shift - local msg="% modprobe $mod $*" + local msg="% insmod test_modules/$mod.ko $*" log "${msg%% }" - ret=$(modprobe "$mod" "$@" 2>&1) + ret=$(insmod "test_modules/$mod.ko" "$@" 2>&1) if [[ "$ret" != "" ]]; then die "$ret" fi @@ -161,13 +159,10 @@ function __load_mod() { # load_mod(modname, params) - load a kernel module # modname - module name to load -# params - module parameters to pass to modprobe +# params - module parameters to pass to insmod function load_mod() { local mod="$1"; shift - assert_mod "$mod" || - skip "unable to load module ${mod}, verify CONFIG_TEST_LIVEPATCH=m and run self-tests as root" - is_livepatch_mod "$mod" && die "use load_lp() to load the livepatch module $mod" @@ -177,13 +172,10 @@ function load_mod() { # load_lp_nowait(modname, params) - load a kernel module with a livepatch # but do not wait on until the transition finishes # modname - module name to load -# params - module parameters to pass to modprobe +# params - module parameters to pass to insmod function load_lp_nowait() { local mod="$1"; shift - assert_mod "$mod" || - skip "unable to load module ${mod}, verify CONFIG_TEST_LIVEPATCH=m and run self-tests as root" - is_livepatch_mod "$mod" || die "module $mod is not a livepatch" @@ -196,7 +188,7 @@ function load_lp_nowait() { # load_lp(modname, params) - load a kernel module with a livepatch # modname - module name to load -# params - module parameters to pass to modprobe +# params - module parameters to pass to insmod function load_lp() { local mod="$1"; shift @@ -209,13 +201,13 @@ function load_lp() { # load_failing_mod(modname, params) - load a kernel module, expect to fail # modname - module name to load -# params - module parameters to pass to modprobe +# params - module parameters to pass to insmod function load_failing_mod() { local mod="$1"; shift - local msg="% modprobe $mod $*" + local msg="% insmod test_modules/$mod.ko $*" log "${msg%% }" - ret=$(modprobe "$mod" "$@" 2>&1) + ret=$(insmod "test_modules/$mod.ko" "$@" 2>&1) if [[ "$ret" == "" ]]; then die "$mod unexpectedly loaded" fi diff --git a/tools/testing/selftests/livepatch/test-callbacks.sh b/tools/testing/selftests/livepatch/test-callbacks.sh index 90b26dbb2626..32b150e25b10 100755 --- a/tools/testing/selftests/livepatch/test-callbacks.sh +++ b/tools/testing/selftests/livepatch/test-callbacks.sh @@ -34,9 +34,9 @@ disable_lp $MOD_LIVEPATCH unload_lp $MOD_LIVEPATCH unload_mod $MOD_TARGET -check_result "% modprobe $MOD_TARGET +check_result "% insmod test_modules/$MOD_TARGET.ko $MOD_TARGET: ${MOD_TARGET}_init -% modprobe $MOD_LIVEPATCH +% insmod test_modules/$MOD_LIVEPATCH.ko livepatch: enabling patch '$MOD_LIVEPATCH' livepatch: '$MOD_LIVEPATCH': initializing patching transition $MOD_LIVEPATCH: pre_patch_callback: vmlinux @@ -81,7 +81,7 @@ disable_lp $MOD_LIVEPATCH unload_lp $MOD_LIVEPATCH unload_mod $MOD_TARGET -check_result "% modprobe $MOD_LIVEPATCH +check_result "% insmod test_modules/$MOD_LIVEPATCH.ko livepatch: enabling patch '$MOD_LIVEPATCH' livepatch: '$MOD_LIVEPATCH': initializing patching transition $MOD_LIVEPATCH: pre_patch_callback: vmlinux @@ -89,7 +89,7 @@ livepatch: '$MOD_LIVEPATCH': starting patching transition livepatch: '$MOD_LIVEPATCH': completing patching transition $MOD_LIVEPATCH: post_patch_callback: vmlinux livepatch: '$MOD_LIVEPATCH': patching complete -% modprobe $MOD_TARGET +% insmod test_modules/$MOD_TARGET.ko livepatch: applying patch '$MOD_LIVEPATCH' to loading module '$MOD_TARGET' $MOD_LIVEPATCH: pre_patch_callback: $MOD_TARGET -> [MODULE_STATE_COMING] Full formed, running module_init $MOD_LIVEPATCH: post_patch_callback: $MOD_TARGET -> [MODULE_STATE_COMING] Full formed, running module_init @@ -129,9 +129,9 @@ unload_mod $MOD_TARGET disable_lp $MOD_LIVEPATCH unload_lp $MOD_LIVEPATCH -check_result "% modprobe $MOD_TARGET +check_result "% insmod test_modules/$MOD_TARGET.ko $MOD_TARGET: ${MOD_TARGET}_init -% modprobe $MOD_LIVEPATCH +% insmod test_modules/$MOD_LIVEPATCH.ko livepatch: enabling patch '$MOD_LIVEPATCH' livepatch: '$MOD_LIVEPATCH': initializing patching transition $MOD_LIVEPATCH: pre_patch_callback: vmlinux @@ -177,7 +177,7 @@ unload_mod $MOD_TARGET disable_lp $MOD_LIVEPATCH unload_lp $MOD_LIVEPATCH -check_result "% modprobe $MOD_LIVEPATCH +check_result "% insmod test_modules/$MOD_LIVEPATCH.ko livepatch: enabling patch '$MOD_LIVEPATCH' livepatch: '$MOD_LIVEPATCH': initializing patching transition $MOD_LIVEPATCH: pre_patch_callback: vmlinux @@ -185,7 +185,7 @@ livepatch: '$MOD_LIVEPATCH': starting patching transition livepatch: '$MOD_LIVEPATCH': completing patching transition $MOD_LIVEPATCH: post_patch_callback: vmlinux livepatch: '$MOD_LIVEPATCH': patching complete -% modprobe $MOD_TARGET +% insmod test_modules/$MOD_TARGET.ko livepatch: applying patch '$MOD_LIVEPATCH' to loading module '$MOD_TARGET' $MOD_LIVEPATCH: pre_patch_callback: $MOD_TARGET -> [MODULE_STATE_COMING] Full formed, running module_init $MOD_LIVEPATCH: post_patch_callback: $MOD_TARGET -> [MODULE_STATE_COMING] Full formed, running module_init @@ -219,7 +219,7 @@ load_lp $MOD_LIVEPATCH disable_lp $MOD_LIVEPATCH unload_lp $MOD_LIVEPATCH -check_result "% modprobe $MOD_LIVEPATCH +check_result "% insmod test_modules/$MOD_LIVEPATCH.ko livepatch: enabling patch '$MOD_LIVEPATCH' livepatch: '$MOD_LIVEPATCH': initializing patching transition $MOD_LIVEPATCH: pre_patch_callback: vmlinux @@ -254,9 +254,9 @@ load_mod $MOD_TARGET load_failing_mod $MOD_LIVEPATCH pre_patch_ret=-19 unload_mod $MOD_TARGET -check_result "% modprobe $MOD_TARGET +check_result "% insmod test_modules/$MOD_TARGET.ko $MOD_TARGET: ${MOD_TARGET}_init -% modprobe $MOD_LIVEPATCH pre_patch_ret=-19 +% insmod test_modules/$MOD_LIVEPATCH.ko pre_patch_ret=-19 livepatch: enabling patch '$MOD_LIVEPATCH' livepatch: '$MOD_LIVEPATCH': initializing patching transition test_klp_callbacks_demo: pre_patch_callback: vmlinux @@ -265,7 +265,7 @@ livepatch: failed to enable patch '$MOD_LIVEPATCH' livepatch: '$MOD_LIVEPATCH': canceling patching transition, going to unpatch livepatch: '$MOD_LIVEPATCH': completing unpatching transition livepatch: '$MOD_LIVEPATCH': unpatching complete -modprobe: ERROR: could not insert '$MOD_LIVEPATCH': No such device +insmod: ERROR: could not insert module test_modules/$MOD_LIVEPATCH.ko: No such device % rmmod $MOD_TARGET $MOD_TARGET: ${MOD_TARGET}_exit" @@ -295,7 +295,7 @@ load_failing_mod $MOD_TARGET disable_lp $MOD_LIVEPATCH unload_lp $MOD_LIVEPATCH -check_result "% modprobe $MOD_LIVEPATCH +check_result "% insmod test_modules/$MOD_LIVEPATCH.ko livepatch: enabling patch '$MOD_LIVEPATCH' livepatch: '$MOD_LIVEPATCH': initializing patching transition $MOD_LIVEPATCH: pre_patch_callback: vmlinux @@ -304,12 +304,12 @@ livepatch: '$MOD_LIVEPATCH': completing patching transition $MOD_LIVEPATCH: post_patch_callback: vmlinux livepatch: '$MOD_LIVEPATCH': patching complete % echo -19 > /sys/module/$MOD_LIVEPATCH/parameters/pre_patch_ret -% modprobe $MOD_TARGET +% insmod test_modules/$MOD_TARGET.ko livepatch: applying patch '$MOD_LIVEPATCH' to loading module '$MOD_TARGET' $MOD_LIVEPATCH: pre_patch_callback: $MOD_TARGET -> [MODULE_STATE_COMING] Full formed, running module_init livepatch: pre-patch callback failed for object '$MOD_TARGET' livepatch: patch '$MOD_LIVEPATCH' failed for module '$MOD_TARGET', refusing to load module '$MOD_TARGET' -modprobe: ERROR: could not insert '$MOD_TARGET': No such device +insmod: ERROR: could not insert module test_modules/$MOD_TARGET.ko: No such device % echo 0 > /sys/kernel/livepatch/$MOD_LIVEPATCH/enabled livepatch: '$MOD_LIVEPATCH': initializing unpatching transition $MOD_LIVEPATCH: pre_unpatch_callback: vmlinux @@ -340,11 +340,11 @@ disable_lp $MOD_LIVEPATCH unload_lp $MOD_LIVEPATCH unload_mod $MOD_TARGET_BUSY -check_result "% modprobe $MOD_TARGET_BUSY block_transition=N +check_result "% insmod test_modules/$MOD_TARGET_BUSY.ko block_transition=N $MOD_TARGET_BUSY: ${MOD_TARGET_BUSY}_init $MOD_TARGET_BUSY: busymod_work_func enter $MOD_TARGET_BUSY: busymod_work_func exit -% modprobe $MOD_LIVEPATCH +% insmod test_modules/$MOD_LIVEPATCH.ko livepatch: enabling patch '$MOD_LIVEPATCH' livepatch: '$MOD_LIVEPATCH': initializing patching transition $MOD_LIVEPATCH: pre_patch_callback: vmlinux @@ -354,7 +354,7 @@ livepatch: '$MOD_LIVEPATCH': completing patching transition $MOD_LIVEPATCH: post_patch_callback: vmlinux $MOD_LIVEPATCH: post_patch_callback: $MOD_TARGET_BUSY -> [MODULE_STATE_LIVE] Normal state livepatch: '$MOD_LIVEPATCH': patching complete -% modprobe $MOD_TARGET +% insmod test_modules/$MOD_TARGET.ko livepatch: applying patch '$MOD_LIVEPATCH' to loading module '$MOD_TARGET' $MOD_LIVEPATCH: pre_patch_callback: $MOD_TARGET -> [MODULE_STATE_COMING] Full formed, running module_init $MOD_LIVEPATCH: post_patch_callback: $MOD_TARGET -> [MODULE_STATE_COMING] Full formed, running module_init @@ -421,16 +421,16 @@ disable_lp $MOD_LIVEPATCH unload_lp $MOD_LIVEPATCH unload_mod $MOD_TARGET_BUSY -check_result "% modprobe $MOD_TARGET_BUSY block_transition=Y +check_result "% insmod test_modules/$MOD_TARGET_BUSY.ko block_transition=Y $MOD_TARGET_BUSY: ${MOD_TARGET_BUSY}_init $MOD_TARGET_BUSY: busymod_work_func enter -% modprobe $MOD_LIVEPATCH +% insmod test_modules/$MOD_LIVEPATCH.ko livepatch: enabling patch '$MOD_LIVEPATCH' livepatch: '$MOD_LIVEPATCH': initializing patching transition $MOD_LIVEPATCH: pre_patch_callback: vmlinux $MOD_LIVEPATCH: pre_patch_callback: $MOD_TARGET_BUSY -> [MODULE_STATE_LIVE] Normal state livepatch: '$MOD_LIVEPATCH': starting patching transition -% modprobe $MOD_TARGET +% insmod test_modules/$MOD_TARGET.ko livepatch: applying patch '$MOD_LIVEPATCH' to loading module '$MOD_TARGET' $MOD_LIVEPATCH: pre_patch_callback: $MOD_TARGET -> [MODULE_STATE_COMING] Full formed, running module_init $MOD_TARGET: ${MOD_TARGET}_init @@ -467,7 +467,7 @@ disable_lp $MOD_LIVEPATCH unload_lp $MOD_LIVEPATCH2 unload_lp $MOD_LIVEPATCH -check_result "% modprobe $MOD_LIVEPATCH +check_result "% insmod test_modules/$MOD_LIVEPATCH.ko livepatch: enabling patch '$MOD_LIVEPATCH' livepatch: '$MOD_LIVEPATCH': initializing patching transition $MOD_LIVEPATCH: pre_patch_callback: vmlinux @@ -475,7 +475,7 @@ livepatch: '$MOD_LIVEPATCH': starting patching transition livepatch: '$MOD_LIVEPATCH': completing patching transition $MOD_LIVEPATCH: post_patch_callback: vmlinux livepatch: '$MOD_LIVEPATCH': patching complete -% modprobe $MOD_LIVEPATCH2 +% insmod test_modules/$MOD_LIVEPATCH2.ko livepatch: enabling patch '$MOD_LIVEPATCH2' livepatch: '$MOD_LIVEPATCH2': initializing patching transition $MOD_LIVEPATCH2: pre_patch_callback: vmlinux @@ -523,7 +523,7 @@ disable_lp $MOD_LIVEPATCH2 unload_lp $MOD_LIVEPATCH2 unload_lp $MOD_LIVEPATCH -check_result "% modprobe $MOD_LIVEPATCH +check_result "% insmod test_modules/$MOD_LIVEPATCH.ko livepatch: enabling patch '$MOD_LIVEPATCH' livepatch: '$MOD_LIVEPATCH': initializing patching transition $MOD_LIVEPATCH: pre_patch_callback: vmlinux @@ -531,7 +531,7 @@ livepatch: '$MOD_LIVEPATCH': starting patching transition livepatch: '$MOD_LIVEPATCH': completing patching transition $MOD_LIVEPATCH: post_patch_callback: vmlinux livepatch: '$MOD_LIVEPATCH': patching complete -% modprobe $MOD_LIVEPATCH2 replace=1 +% insmod test_modules/$MOD_LIVEPATCH2.ko replace=1 livepatch: enabling patch '$MOD_LIVEPATCH2' livepatch: '$MOD_LIVEPATCH2': initializing patching transition $MOD_LIVEPATCH2: pre_patch_callback: vmlinux diff --git a/tools/testing/selftests/livepatch/test-ftrace.sh b/tools/testing/selftests/livepatch/test-ftrace.sh index 825540a5194d..730218bce99c 100755 --- a/tools/testing/selftests/livepatch/test-ftrace.sh +++ b/tools/testing/selftests/livepatch/test-ftrace.sh @@ -35,7 +35,7 @@ disable_lp $MOD_LIVEPATCH unload_lp $MOD_LIVEPATCH check_result "livepatch: kernel.ftrace_enabled = 0 -% modprobe $MOD_LIVEPATCH +% insmod test_modules/$MOD_LIVEPATCH.ko livepatch: enabling patch '$MOD_LIVEPATCH' livepatch: '$MOD_LIVEPATCH': initializing patching transition livepatch: failed to register ftrace handler for function 'cmdline_proc_show' (-16) @@ -44,9 +44,9 @@ livepatch: failed to enable patch '$MOD_LIVEPATCH' livepatch: '$MOD_LIVEPATCH': canceling patching transition, going to unpatch livepatch: '$MOD_LIVEPATCH': completing unpatching transition livepatch: '$MOD_LIVEPATCH': unpatching complete -modprobe: ERROR: could not insert '$MOD_LIVEPATCH': Device or resource busy +insmod: ERROR: could not insert module test_modules/$MOD_LIVEPATCH.ko: Device or resource busy livepatch: kernel.ftrace_enabled = 1 -% modprobe $MOD_LIVEPATCH +% insmod test_modules/$MOD_LIVEPATCH.ko livepatch: enabling patch '$MOD_LIVEPATCH' livepatch: '$MOD_LIVEPATCH': initializing patching transition livepatch: '$MOD_LIVEPATCH': starting patching transition diff --git a/tools/testing/selftests/livepatch/test-livepatch.sh b/tools/testing/selftests/livepatch/test-livepatch.sh index 5fe79ac34be1..e3455a6b1158 100755 --- a/tools/testing/selftests/livepatch/test-livepatch.sh +++ b/tools/testing/selftests/livepatch/test-livepatch.sh @@ -31,7 +31,7 @@ if [[ "$(cat /proc/cmdline)" == "$MOD_LIVEPATCH: this has been live patched" ]] die "livepatch kselftest(s) failed" fi -check_result "% modprobe $MOD_LIVEPATCH +check_result "% insmod test_modules/$MOD_LIVEPATCH.ko livepatch: enabling patch '$MOD_LIVEPATCH' livepatch: '$MOD_LIVEPATCH': initializing patching transition livepatch: '$MOD_LIVEPATCH': starting patching transition @@ -75,14 +75,14 @@ unload_lp $MOD_LIVEPATCH grep 'live patched' /proc/cmdline > /dev/kmsg grep 'live patched' /proc/meminfo > /dev/kmsg -check_result "% modprobe $MOD_LIVEPATCH +check_result "% insmod test_modules/$MOD_LIVEPATCH.ko livepatch: enabling patch '$MOD_LIVEPATCH' livepatch: '$MOD_LIVEPATCH': initializing patching transition livepatch: '$MOD_LIVEPATCH': starting patching transition livepatch: '$MOD_LIVEPATCH': completing patching transition livepatch: '$MOD_LIVEPATCH': patching complete $MOD_LIVEPATCH: this has been live patched -% modprobe $MOD_REPLACE replace=0 +% insmod test_modules/$MOD_REPLACE.ko replace=0 livepatch: enabling patch '$MOD_REPLACE' livepatch: '$MOD_REPLACE': initializing patching transition livepatch: '$MOD_REPLACE': starting patching transition @@ -135,14 +135,14 @@ unload_lp $MOD_REPLACE grep 'live patched' /proc/cmdline > /dev/kmsg grep 'live patched' /proc/meminfo > /dev/kmsg -check_result "% modprobe $MOD_LIVEPATCH +check_result "% insmod test_modules/$MOD_LIVEPATCH.ko livepatch: enabling patch '$MOD_LIVEPATCH' livepatch: '$MOD_LIVEPATCH': initializing patching transition livepatch: '$MOD_LIVEPATCH': starting patching transition livepatch: '$MOD_LIVEPATCH': completing patching transition livepatch: '$MOD_LIVEPATCH': patching complete $MOD_LIVEPATCH: this has been live patched -% modprobe $MOD_REPLACE replace=1 +% insmod test_modules/$MOD_REPLACE.ko replace=1 livepatch: enabling patch '$MOD_REPLACE' livepatch: '$MOD_REPLACE': initializing patching transition livepatch: '$MOD_REPLACE': starting patching transition diff --git a/tools/testing/selftests/livepatch/test-shadow-vars.sh b/tools/testing/selftests/livepatch/test-shadow-vars.sh index e04cb354f56b..1218c155bffe 100755 --- a/tools/testing/selftests/livepatch/test-shadow-vars.sh +++ b/tools/testing/selftests/livepatch/test-shadow-vars.sh @@ -16,7 +16,7 @@ start_test "basic shadow variable API" load_mod $MOD_TEST unload_mod $MOD_TEST -check_result "% modprobe $MOD_TEST +check_result "% insmod test_modules/$MOD_TEST.ko $MOD_TEST: klp_shadow_get(obj=PTR1, id=0x1234) = PTR0 $MOD_TEST: got expected NULL result $MOD_TEST: shadow_ctor: PTR3 -> PTR2 diff --git a/tools/testing/selftests/livepatch/test-state.sh b/tools/testing/selftests/livepatch/test-state.sh index 38656721c958..10a52ac06185 100755 --- a/tools/testing/selftests/livepatch/test-state.sh +++ b/tools/testing/selftests/livepatch/test-state.sh @@ -19,7 +19,7 @@ load_lp $MOD_LIVEPATCH disable_lp $MOD_LIVEPATCH unload_lp $MOD_LIVEPATCH -check_result "% modprobe $MOD_LIVEPATCH +check_result "% insmod test_modules/$MOD_LIVEPATCH.ko livepatch: enabling patch '$MOD_LIVEPATCH' livepatch: '$MOD_LIVEPATCH': initializing patching transition $MOD_LIVEPATCH: pre_patch_callback: vmlinux @@ -51,7 +51,7 @@ unload_lp $MOD_LIVEPATCH disable_lp $MOD_LIVEPATCH2 unload_lp $MOD_LIVEPATCH2 -check_result "% modprobe $MOD_LIVEPATCH +check_result "% insmod test_modules/$MOD_LIVEPATCH.ko livepatch: enabling patch '$MOD_LIVEPATCH' livepatch: '$MOD_LIVEPATCH': initializing patching transition $MOD_LIVEPATCH: pre_patch_callback: vmlinux @@ -61,7 +61,7 @@ livepatch: '$MOD_LIVEPATCH': completing patching transition $MOD_LIVEPATCH: post_patch_callback: vmlinux $MOD_LIVEPATCH: fix_console_loglevel: fixing console_loglevel livepatch: '$MOD_LIVEPATCH': patching complete -% modprobe $MOD_LIVEPATCH2 +% insmod test_modules/$MOD_LIVEPATCH2.ko livepatch: enabling patch '$MOD_LIVEPATCH2' livepatch: '$MOD_LIVEPATCH2': initializing patching transition $MOD_LIVEPATCH2: pre_patch_callback: vmlinux @@ -96,7 +96,7 @@ disable_lp $MOD_LIVEPATCH2 unload_lp $MOD_LIVEPATCH2 unload_lp $MOD_LIVEPATCH3 -check_result "% modprobe $MOD_LIVEPATCH2 +check_result "% insmod test_modules/$MOD_LIVEPATCH2.ko livepatch: enabling patch '$MOD_LIVEPATCH2' livepatch: '$MOD_LIVEPATCH2': initializing patching transition $MOD_LIVEPATCH2: pre_patch_callback: vmlinux @@ -106,7 +106,7 @@ livepatch: '$MOD_LIVEPATCH2': completing patching transition $MOD_LIVEPATCH2: post_patch_callback: vmlinux $MOD_LIVEPATCH2: fix_console_loglevel: fixing console_loglevel livepatch: '$MOD_LIVEPATCH2': patching complete -% modprobe $MOD_LIVEPATCH3 +% insmod test_modules/$MOD_LIVEPATCH3.ko livepatch: enabling patch '$MOD_LIVEPATCH3' livepatch: '$MOD_LIVEPATCH3': initializing patching transition $MOD_LIVEPATCH3: pre_patch_callback: vmlinux @@ -117,7 +117,7 @@ $MOD_LIVEPATCH3: post_patch_callback: vmlinux $MOD_LIVEPATCH3: fix_console_loglevel: taking over the console_loglevel change livepatch: '$MOD_LIVEPATCH3': patching complete % rmmod $MOD_LIVEPATCH2 -% modprobe $MOD_LIVEPATCH2 +% insmod test_modules/$MOD_LIVEPATCH2.ko livepatch: enabling patch '$MOD_LIVEPATCH2' livepatch: '$MOD_LIVEPATCH2': initializing patching transition $MOD_LIVEPATCH2: pre_patch_callback: vmlinux @@ -149,7 +149,7 @@ load_failing_mod $MOD_LIVEPATCH disable_lp $MOD_LIVEPATCH2 unload_lp $MOD_LIVEPATCH2 -check_result "% modprobe $MOD_LIVEPATCH2 +check_result "% insmod test_modules/$MOD_LIVEPATCH2.ko livepatch: enabling patch '$MOD_LIVEPATCH2' livepatch: '$MOD_LIVEPATCH2': initializing patching transition $MOD_LIVEPATCH2: pre_patch_callback: vmlinux @@ -159,9 +159,9 @@ livepatch: '$MOD_LIVEPATCH2': completing patching transition $MOD_LIVEPATCH2: post_patch_callback: vmlinux $MOD_LIVEPATCH2: fix_console_loglevel: fixing console_loglevel livepatch: '$MOD_LIVEPATCH2': patching complete -% modprobe $MOD_LIVEPATCH +% insmod test_modules/$MOD_LIVEPATCH.ko livepatch: Livepatch patch ($MOD_LIVEPATCH) is not compatible with the already installed livepatches. -modprobe: ERROR: could not insert '$MOD_LIVEPATCH': Invalid argument +insmod: ERROR: could not insert module test_modules/$MOD_LIVEPATCH.ko: Invalid parameters % echo 0 > /sys/kernel/livepatch/$MOD_LIVEPATCH2/enabled livepatch: '$MOD_LIVEPATCH2': initializing unpatching transition $MOD_LIVEPATCH2: pre_unpatch_callback: vmlinux diff --git a/tools/testing/selftests/livepatch/test-sysfs.sh b/tools/testing/selftests/livepatch/test-sysfs.sh index 7f76f280189a..6c646afa7395 100755 --- a/tools/testing/selftests/livepatch/test-sysfs.sh +++ b/tools/testing/selftests/livepatch/test-sysfs.sh @@ -27,7 +27,7 @@ disable_lp $MOD_LIVEPATCH unload_lp $MOD_LIVEPATCH -check_result "% modprobe $MOD_LIVEPATCH +check_result "% insmod test_modules/$MOD_LIVEPATCH.ko livepatch: enabling patch '$MOD_LIVEPATCH' livepatch: '$MOD_LIVEPATCH': initializing patching transition livepatch: '$MOD_LIVEPATCH': starting patching transition @@ -56,7 +56,7 @@ check_sysfs_value "$MOD_LIVEPATCH" "$MOD_TARGET/patched" "0" disable_lp $MOD_LIVEPATCH unload_lp $MOD_LIVEPATCH -check_result "% modprobe test_klp_callbacks_demo +check_result "% insmod test_modules/test_klp_callbacks_demo.ko livepatch: enabling patch 'test_klp_callbacks_demo' livepatch: 'test_klp_callbacks_demo': initializing patching transition test_klp_callbacks_demo: pre_patch_callback: vmlinux @@ -64,7 +64,7 @@ livepatch: 'test_klp_callbacks_demo': starting patching transition livepatch: 'test_klp_callbacks_demo': completing patching transition test_klp_callbacks_demo: post_patch_callback: vmlinux livepatch: 'test_klp_callbacks_demo': patching complete -% modprobe test_klp_callbacks_mod +% insmod test_modules/test_klp_callbacks_mod.ko livepatch: applying patch 'test_klp_callbacks_demo' to loading module 'test_klp_callbacks_mod' test_klp_callbacks_demo: pre_patch_callback: test_klp_callbacks_mod -> [MODULE_STATE_COMING] Full formed, running module_init test_klp_callbacks_demo: post_patch_callback: test_klp_callbacks_mod -> [MODULE_STATE_COMING] Full formed, running module_init diff --git a/tools/testing/selftests/livepatch/test_modules/Makefile b/tools/testing/selftests/livepatch/test_modules/Makefile new file mode 100644 index 000000000000..6f7c2103d27d --- /dev/null +++ b/tools/testing/selftests/livepatch/test_modules/Makefile @@ -0,0 +1,19 @@ +TESTMODS_DIR := $(realpath $(dir $(abspath $(lastword $(MAKEFILE_LIST))))) +KDIR ?= /lib/modules/$(shell uname -r)/build + +obj-m += test_klp_atomic_replace.o \ + test_klp_callbacks_busy.o \ + test_klp_callbacks_demo.o \ + test_klp_callbacks_demo2.o \ + test_klp_callbacks_mod.o \ + test_klp_livepatch.o \ + test_klp_state.o \ + test_klp_state2.o \ + test_klp_state3.o \ + test_klp_shadow_vars.o + +modules: + $(Q)$(MAKE) -C $(KDIR) modules KBUILD_EXTMOD=$(TESTMODS_DIR) + +clean: + $(Q)$(MAKE) -C $(KDIR) clean KBUILD_EXTMOD=$(TESTMODS_DIR) diff --git a/lib/livepatch/test_klp_atomic_replace.c b/tools/testing/selftests/livepatch/test_modules/test_klp_atomic_replace.c similarity index 100% rename from lib/livepatch/test_klp_atomic_replace.c rename to tools/testing/selftests/livepatch/test_modules/test_klp_atomic_replace.c diff --git a/lib/livepatch/test_klp_callbacks_busy.c b/tools/testing/selftests/livepatch/test_modules/test_klp_callbacks_busy.c similarity index 100% rename from lib/livepatch/test_klp_callbacks_busy.c rename to tools/testing/selftests/livepatch/test_modules/test_klp_callbacks_busy.c diff --git a/lib/livepatch/test_klp_callbacks_demo.c b/tools/testing/selftests/livepatch/test_modules/test_klp_callbacks_demo.c similarity index 100% rename from lib/livepatch/test_klp_callbacks_demo.c rename to tools/testing/selftests/livepatch/test_modules/test_klp_callbacks_demo.c diff --git a/lib/livepatch/test_klp_callbacks_demo2.c b/tools/testing/selftests/livepatch/test_modules/test_klp_callbacks_demo2.c similarity index 100% rename from lib/livepatch/test_klp_callbacks_demo2.c rename to tools/testing/selftests/livepatch/test_modules/test_klp_callbacks_demo2.c diff --git a/lib/livepatch/test_klp_callbacks_mod.c b/tools/testing/selftests/livepatch/test_modules/test_klp_callbacks_mod.c similarity index 100% rename from lib/livepatch/test_klp_callbacks_mod.c rename to tools/testing/selftests/livepatch/test_modules/test_klp_callbacks_mod.c diff --git a/lib/livepatch/test_klp_livepatch.c b/tools/testing/selftests/livepatch/test_modules/test_klp_livepatch.c similarity index 100% rename from lib/livepatch/test_klp_livepatch.c rename to tools/testing/selftests/livepatch/test_modules/test_klp_livepatch.c diff --git a/lib/livepatch/test_klp_shadow_vars.c b/tools/testing/selftests/livepatch/test_modules/test_klp_shadow_vars.c similarity index 100% rename from lib/livepatch/test_klp_shadow_vars.c rename to tools/testing/selftests/livepatch/test_modules/test_klp_shadow_vars.c diff --git a/lib/livepatch/test_klp_state.c b/tools/testing/selftests/livepatch/test_modules/test_klp_state.c similarity index 100% rename from lib/livepatch/test_klp_state.c rename to tools/testing/selftests/livepatch/test_modules/test_klp_state.c diff --git a/lib/livepatch/test_klp_state2.c b/tools/testing/selftests/livepatch/test_modules/test_klp_state2.c similarity index 100% rename from lib/livepatch/test_klp_state2.c rename to tools/testing/selftests/livepatch/test_modules/test_klp_state2.c diff --git a/lib/livepatch/test_klp_state3.c b/tools/testing/selftests/livepatch/test_modules/test_klp_state3.c similarity index 100% rename from lib/livepatch/test_klp_state3.c rename to tools/testing/selftests/livepatch/test_modules/test_klp_state3.c
The modules are being moved from lib/livepatch to tools/testing/selftests/livepatch/test_modules. This code moving will allow writing more complex tests, like for example an userspace C code that will call a livepatched kernel function. The modules are now built as out-of-tree modules, but being part of the kernel source means they will be maintained. Another advantage of the code moving is to be able to easily change, debug and rebuild the tests by running make on the selftests/livepatch directory, which is not currently possible since the modules on lib/livepatch are build and installed using the "modules" target. The current approach also keeps the ability to execute the tests manually by executing the scripts inside selftests/livepatch directory, as it's currently supported. If the modules are modified, they needed to be rebuilt before running the scripts though. The modules are built before running the selftests when using the kselftest invocations: make kselftest TARGETS=livepatch or make -C tools/testing/selftests/livepatch run_tests Having the modules being built as out-of-modules requires changing the currently used 'modprobe' by 'insmod' and adapt the test scripts that check for the kernel message buffer. As there aren't any modules being built on lib/livepatch, remove the TEST_LIVEPATCH Kconfig and it's references. Note: "make gen_tar" packages the pre-built binaries into the tarball. It means that it will store the test modules pre-built for the kernel running on the build host. Note that these modules need not binary compatible with the kernel built from the same sources. But the same is true for other packaged selftest binaries. The entire kernel sources are needed for rebuilding the selftests on another system. Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com> --- arch/s390/configs/debug_defconfig | 1 - arch/s390/configs/defconfig | 1 - lib/Kconfig.debug | 22 ---------- lib/Makefile | 2 - lib/livepatch/Makefile | 14 ------ tools/testing/selftests/livepatch/Makefile | 1 + tools/testing/selftests/livepatch/README | 17 +++++--- tools/testing/selftests/livepatch/config | 1 - tools/testing/selftests/livepatch/functions.sh | 34 ++++++--------- .../testing/selftests/livepatch/test-callbacks.sh | 50 +++++++++++----------- tools/testing/selftests/livepatch/test-ftrace.sh | 6 +-- .../testing/selftests/livepatch/test-livepatch.sh | 10 ++--- .../selftests/livepatch/test-shadow-vars.sh | 2 +- tools/testing/selftests/livepatch/test-state.sh | 18 ++++---- tools/testing/selftests/livepatch/test-sysfs.sh | 6 +-- .../selftests/livepatch/test_modules/Makefile | 19 ++++++++ .../test_modules}/test_klp_atomic_replace.c | 0 .../test_modules}/test_klp_callbacks_busy.c | 0 .../test_modules}/test_klp_callbacks_demo.c | 0 .../test_modules}/test_klp_callbacks_demo2.c | 0 .../test_modules}/test_klp_callbacks_mod.c | 0 .../livepatch/test_modules}/test_klp_livepatch.c | 0 .../livepatch/test_modules}/test_klp_shadow_vars.c | 0 .../livepatch/test_modules}/test_klp_state.c | 0 .../livepatch/test_modules}/test_klp_state2.c | 0 .../livepatch/test_modules}/test_klp_state3.c | 0 26 files changed, 89 insertions(+), 115 deletions(-)