@@ -3,14 +3,9 @@
# This test is for checking IPv4 and IPv6 FIB rules API
-# Kselftest framework requirement - SKIP code is 4.
-ksft_skip=4
-
+source lib.sh
ret=0
-
PAUSE_ON_FAIL=${PAUSE_ON_FAIL:=no}
-IP="ip -netns testns"
-IP_PEER="ip -netns peerns"
RTABLE=100
RTABLE_PEER=101
@@ -84,8 +79,8 @@ check_nettest()
setup()
{
set -e
- ip netns add testns
- $IP link set dev lo up
+ setup_ns testns
+ IP="ip -netns $testns"
$IP link add dummy0 type dummy
$IP link set dev dummy0 up
@@ -98,18 +93,19 @@ setup()
cleanup()
{
$IP link del dev dummy0 &> /dev/null
- ip netns del testns
+ ip netns del $testns
}
setup_peer()
{
set -e
- ip netns add peerns
+ setup_ns peerns
+ IP_PEER="ip -netns $peerns"
$IP_PEER link set dev lo up
- ip link add name veth0 netns testns type veth \
- peer name veth1 netns peerns
+ ip link add name veth0 netns $testns type veth \
+ peer name veth1 netns $peerns
$IP link set dev veth0 up
$IP_PEER link set dev veth1 up
@@ -131,7 +127,7 @@ setup_peer()
cleanup_peer()
{
$IP link del dev veth0
- ip netns del peerns
+ ip netns del $peerns
}
fib_check_iproute_support()
@@ -270,11 +266,11 @@ fib_rule6_connect_test()
# (Not-ECT: 0, ECT(1): 1, ECT(0): 2, CE: 3).
# The ECN bits shouldn't influence the result of the test.
for dsfield in 0x04 0x05 0x06 0x07; do
- nettest -q -6 -B -t 5 -N testns -O peerns -U -D \
+ nettest -q -6 -B -t 5 -N $testns -O $peerns -U -D \
-Q "${dsfield}" -l 2001:db8::1:11 -r 2001:db8::1:11
log_test $? 0 "rule6 dsfield udp connect (dsfield ${dsfield})"
- nettest -q -6 -B -t 5 -N testns -O peerns -Q "${dsfield}" \
+ nettest -q -6 -B -t 5 -N $testns -O $peerns -Q "${dsfield}" \
-l 2001:db8::1:11 -r 2001:db8::1:11
log_test $? 0 "rule6 dsfield tcp connect (dsfield ${dsfield})"
done
@@ -337,11 +333,11 @@ fib_rule4_test()
# need enable forwarding and disable rp_filter temporarily as all the
# addresses are in the same subnet and egress device == ingress device.
- ip netns exec testns sysctl -qw net.ipv4.ip_forward=1
- ip netns exec testns sysctl -qw net.ipv4.conf.$DEV.rp_filter=0
+ ip netns exec $testns sysctl -qw net.ipv4.ip_forward=1
+ ip netns exec $testns sysctl -qw net.ipv4.conf.$DEV.rp_filter=0
match="from $SRC_IP iif $DEV"
fib_rule4_test_match_n_redirect "$match" "$match" "iif redirect to table"
- ip netns exec testns sysctl -qw net.ipv4.ip_forward=0
+ ip netns exec $testns sysctl -qw net.ipv4.ip_forward=0
# Reject dsfield (tos) options which have ECN bits set
for cnt in $(seq 1 3); do
@@ -407,11 +403,11 @@ fib_rule4_connect_test()
# (Not-ECT: 0, ECT(1): 1, ECT(0): 2, CE: 3).
# The ECN bits shouldn't influence the result of the test.
for dsfield in 0x04 0x05 0x06 0x07; do
- nettest -q -B -t 5 -N testns -O peerns -D -U -Q "${dsfield}" \
+ nettest -q -B -t 5 -N $testns -O $peerns -D -U -Q "${dsfield}" \
-l 198.51.100.11 -r 198.51.100.11
log_test $? 0 "rule4 dsfield udp connect (dsfield ${dsfield})"
- nettest -q -B -t 5 -N testns -O peerns -Q "${dsfield}" \
+ nettest -q -B -t 5 -N $testns -O $peerns -Q "${dsfield}" \
-l 198.51.100.11 -r 198.51.100.11
log_test $? 0 "rule4 dsfield tcp connect (dsfield ${dsfield})"
done
Here is the test result after conversion. ]# ./fib_rule_tests.sh TEST: rule6 check: oif redirect to table [ OK ] ... TEST: rule4 dsfield tcp connect (dsfield 0x07) [ OK ] Tests passed: 66 Tests failed: 0 Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> --- tools/testing/selftests/net/fib_rule_tests.sh | 36 +++++++++---------- 1 file changed, 16 insertions(+), 20 deletions(-)