Message ID | 20231205063537.872834-2-li.meng@amd.com (mailing list archive) |
---|---|
State | Accepted |
Commit | 3598e577d1290008dcc753a015675fe617cdde45 |
Headers | show |
Series | amd-pstate preferred core | expand |
On Tue, Dec 5, 2023 at 7:38 AM Meng Li <li.meng@amd.com> wrote: > > amd-pstate driver also uses SCHED_MC_PRIO, so decouple the requirement > of CPU_SUP_INTEL from the dependencies to allow compilation in kernels > without Intel CPU support. > > Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> > Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> > Reviewed-by: Huang Rui <ray.huang@amd.com> > Reviewed-by: Perry Yuan <perry.yuan@amd.com> > Signed-off-by: Meng Li <li.meng@amd.com> > --- > arch/x86/Kconfig | 5 +++-- > 1 file changed, 3 insertions(+), 2 deletions(-) > > diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig > index 3762f41bb092..3e57773f946a 100644 > --- a/arch/x86/Kconfig > +++ b/arch/x86/Kconfig > @@ -1054,8 +1054,9 @@ config SCHED_MC > > config SCHED_MC_PRIO > bool "CPU core priorities scheduler support" > - depends on SCHED_MC && CPU_SUP_INTEL > - select X86_INTEL_PSTATE > + depends on SCHED_MC > + select X86_INTEL_PSTATE if CPU_SUP_INTEL > + select X86_AMD_PSTATE if CPU_SUP_AMD && ACPI > select CPU_FREQ > default y > help > -- This needs an ACK from the x86 maintainers.
On Tue, Dec 05, 2023 at 02:35:31PM +0800, Meng Li wrote: > amd-pstate driver also uses SCHED_MC_PRIO, so decouple the requirement > of CPU_SUP_INTEL from the dependencies to allow compilation in kernels > without Intel CPU support. > > Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> > Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> > Reviewed-by: Huang Rui <ray.huang@amd.com> > Reviewed-by: Perry Yuan <perry.yuan@amd.com> > Signed-off-by: Meng Li <li.meng@amd.com> > --- > arch/x86/Kconfig | 5 +++-- > 1 file changed, 3 insertions(+), 2 deletions(-) > > diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig > index 3762f41bb092..3e57773f946a 100644 > --- a/arch/x86/Kconfig > +++ b/arch/x86/Kconfig > @@ -1054,8 +1054,9 @@ config SCHED_MC > > config SCHED_MC_PRIO > bool "CPU core priorities scheduler support" > - depends on SCHED_MC && CPU_SUP_INTEL > - select X86_INTEL_PSTATE > + depends on SCHED_MC > + select X86_INTEL_PSTATE if CPU_SUP_INTEL > + select X86_AMD_PSTATE if CPU_SUP_AMD && ACPI > select CPU_FREQ > default y > help > -- I was gonna ask why the selects but apparently mingo wants SCHED_MC_PRIO to be selectable easier: 0a21fc1214a2 ("sched/x86: Make CONFIG_SCHED_MC_PRIO=y easier to enable") So, Acked-by: Borislav Petkov (AMD) <bp@alien8.de> Thx.
[AMD Official Use Only - General] Hi Petkov: > -----Original Message----- > From: Borislav Petkov <bp@alien8.de> > Sent: Tuesday, January 9, 2024 6:45 PM > To: Meng, Li (Jassmine) <Li.Meng@amd.com> > Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>; Huang, Ray > <Ray.Huang@amd.com>; linux-pm@vger.kernel.org; linux- > kernel@vger.kernel.org; x86@kernel.org; linux-acpi@vger.kernel.org; Shuah > Khan <skhan@linuxfoundation.org>; linux-kselftest@vger.kernel.org; > Fontenot, Nathan <Nathan.Fontenot@amd.com>; Sharma, Deepak > <Deepak.Sharma@amd.com>; Deucher, Alexander > <Alexander.Deucher@amd.com>; Limonciello, Mario > <Mario.Limonciello@amd.com>; Huang, Shimmer > <Shimmer.Huang@amd.com>; Yuan, Perry <Perry.Yuan@amd.com>; Du, > Xiaojian <Xiaojian.Du@amd.com>; Viresh Kumar <viresh.kumar@linaro.org>; > Oleksandr Natalenko <oleksandr@natalenko.name> > Subject: Re: [PATCH V12 1/7] x86: Drop CPU_SUP_INTEL from > SCHED_MC_PRIO for the expansion. > > Caution: This message originated from an External Source. Use proper > caution when opening attachments, clicking links, or responding. > > > On Tue, Dec 05, 2023 at 02:35:31PM +0800, Meng Li wrote: > > amd-pstate driver also uses SCHED_MC_PRIO, so decouple the > requirement > > of CPU_SUP_INTEL from the dependencies to allow compilation in kernels > > without Intel CPU support. > > > > Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> > > Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> > > Reviewed-by: Huang Rui <ray.huang@amd.com> > > Reviewed-by: Perry Yuan <perry.yuan@amd.com> > > Signed-off-by: Meng Li <li.meng@amd.com> > > --- > > arch/x86/Kconfig | 5 +++-- > > 1 file changed, 3 insertions(+), 2 deletions(-) > > > > diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index > > 3762f41bb092..3e57773f946a 100644 > > --- a/arch/x86/Kconfig > > +++ b/arch/x86/Kconfig > > @@ -1054,8 +1054,9 @@ config SCHED_MC > > > > config SCHED_MC_PRIO > > bool "CPU core priorities scheduler support" > > - depends on SCHED_MC && CPU_SUP_INTEL > > - select X86_INTEL_PSTATE > > + depends on SCHED_MC > > + select X86_INTEL_PSTATE if CPU_SUP_INTEL > > + select X86_AMD_PSTATE if CPU_SUP_AMD && ACPI > > select CPU_FREQ > > default y > > help > > -- > > I was gonna ask why the selects but apparently mingo wants > SCHED_MC_PRIO to be selectable easier: > > 0a21fc1214a2 ("sched/x86: Make CONFIG_SCHED_MC_PRIO=y easier to > enable") > [Meng, Li (Jassmine)] Thank you for your feedback. The reason why I added the selects is just to distinguish different pstate drivers. These two drivers cannot be supported simultaneously in the same project. > So, > > Acked-by: Borislav Petkov (AMD) <bp@alien8.de> > > Thx. > > -- > Regards/Gruss, > Boris. > > https://people.kernel.org/tglx/notes-about-netiquette
On Wed, Jan 10, 2024 at 06:59:25AM +0000, Meng, Li (Jassmine) wrote: > The reason why I added the selects is just to distinguish different > pstate drivers. These two drivers cannot be supported simultaneously > in the same project. No, that's not what I meant. Read here: "- reverse dependencies: "select" <symbol> ["if" <expr>] While normal dependencies reduce the upper limit of a symbol (see below), reverse dependencies can be used to force a lower limit of another symbol. The value of the current menu symbol is used as the minimal value <symbol> can be set to. If <symbol> is selected multiple times, the limit is set to the largest selection. Reverse dependencies can only be used with boolean or tristate symbols. Note: select should be used with care. select will force a symbol to a value without visiting the dependencies. By abusing select you are able to select a symbol FOO even if FOO depends on BAR that is not set. In general use select only for non-visible symbols (no prompts anywhere) and for symbols with no dependencies. That will limit the usefulness but on the other hand avoid the illegal configurations all over." From Documentation/kbuild/kconfig-language.rst
[AMD Official Use Only - General] Hi Petkov: > -----Original Message----- > From: Borislav Petkov <bp@alien8.de> > Sent: Wednesday, January 10, 2024 6:04 PM > To: Meng, Li (Jassmine) <Li.Meng@amd.com> > Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>; Huang, Ray > <Ray.Huang@amd.com>; linux-pm@vger.kernel.org; linux- > kernel@vger.kernel.org; x86@kernel.org; linux-acpi@vger.kernel.org; Shuah > Khan <skhan@linuxfoundation.org>; linux-kselftest@vger.kernel.org; > Fontenot, Nathan <Nathan.Fontenot@amd.com>; Sharma, Deepak > <Deepak.Sharma@amd.com>; Deucher, Alexander > <Alexander.Deucher@amd.com>; Limonciello, Mario > <Mario.Limonciello@amd.com>; Huang, Shimmer > <Shimmer.Huang@amd.com>; Yuan, Perry <Perry.Yuan@amd.com>; Du, > Xiaojian <Xiaojian.Du@amd.com>; Viresh Kumar <viresh.kumar@linaro.org>; > Oleksandr Natalenko <oleksandr@natalenko.name> > Subject: Re: [PATCH V12 1/7] x86: Drop CPU_SUP_INTEL from > SCHED_MC_PRIO for the expansion. > > Caution: This message originated from an External Source. Use proper > caution when opening attachments, clicking links, or responding. > > > On Wed, Jan 10, 2024 at 06:59:25AM +0000, Meng, Li (Jassmine) wrote: > > The reason why I added the selects is just to distinguish different > > pstate drivers. These two drivers cannot be supported simultaneously > > in the same project. > > No, that's not what I meant. Read here: > > "- reverse dependencies: "select" <symbol> ["if" <expr>] > > While normal dependencies reduce the upper limit of a symbol (see > below), reverse dependencies can be used to force a lower limit of > another symbol. The value of the current menu symbol is used as the > minimal value <symbol> can be set to. If <symbol> is selected multiple > times, the limit is set to the largest selection. > Reverse dependencies can only be used with boolean or tristate > symbols. > > Note: > select should be used with care. select will force > a symbol to a value without visiting the dependencies. > By abusing select you are able to select a symbol FOO even > if FOO depends on BAR that is not set. > In general use select only for non-visible symbols > (no prompts anywhere) and for symbols with no dependencies. > That will limit the usefulness but on the other hand avoid > the illegal configurations all over." > > From Documentation/kbuild/kconfig-language.rst > [Meng, Li (Jassmine)] Thanks a lot. I will modify it soon. > -- > Regards/Gruss, > Boris. > > https://people.kernel.org/tglx/notes-about-netiquette
On Thu, Jan 11, 2024 at 08:10:48AM +0000, Meng, Li (Jassmine) wrote:
> I will modify it soon.
No, don't modify it, don't do anything. Please read the whole thread
again.
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 3762f41bb092..3e57773f946a 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -1054,8 +1054,9 @@ config SCHED_MC config SCHED_MC_PRIO bool "CPU core priorities scheduler support" - depends on SCHED_MC && CPU_SUP_INTEL - select X86_INTEL_PSTATE + depends on SCHED_MC + select X86_INTEL_PSTATE if CPU_SUP_INTEL + select X86_AMD_PSTATE if CPU_SUP_AMD && ACPI select CPU_FREQ default y help