[net-next,2/9] selftests/net: convert test_bridge_neigh_suppress.sh to run it in unique namespace

Message ID	20231206070801.1691247-3-liuhangbin@gmail.com (mailing list archive)
State	Accepted
Commit	312abe3d93a35f9c486a4703d39cab52457266f0
Headers	show Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="Z8N/v/df" From: Hangbin Liu <liuhangbin@gmail.com> To: netdev@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net>, Jakub Kicinski <kuba@kernel.org>, Eric Dumazet <edumazet@google.com>, Paolo Abeni <pabeni@redhat.com>, Shuah Khan <shuah@kernel.org>, David Ahern <dsahern@kernel.org>, linux-kselftest@vger.kernel.org, Po-Hsu Lin <po-hsu.lin@canonical.com>, Guillaume Nault <gnault@redhat.com>, Petr Machata <petrm@nvidia.com>, Ido Schimmel <idosch@nvidia.com>, Nikolay Aleksandrov <razor@blackwall.org>, Vladimir Nikishkin <vladimir@nikishkin.pw>, Roopa Prabhu <roopa@nvidia.com>, Hangbin Liu <liuhangbin@gmail.com> Subject: [PATCH net-next 2/9] selftests/net: convert test_bridge_neigh_suppress.sh to run it in unique namespace Date: Wed, 6 Dec 2023 15:07:54 +0800 Message-ID: <20231206070801.1691247-3-liuhangbin@gmail.com> In-Reply-To: <20231206070801.1691247-1-liuhangbin@gmail.com> References: <20231206070801.1691247-1-liuhangbin@gmail.com> Precedence: bulk MIME-Version: 1.0 Content-Transfer-Encoding: 8bit
Series	Convert net selftests to run in unique namespace (Part 2) \| expand [net-next,0/9] Convert net selftests to run in unique namespace (Part 2) [net-next,1/9] selftests/net: convert test_bridge_backup_port.sh to run it in unique namespace [net-next,2/9] selftests/net: convert test_bridge_neigh_suppress.sh to run it in unique namespace [net-next,3/9] selftests/net: convert test_vxlan_mdb.sh to run it in unique namespace [net-next,4/9] selftests/net: convert test_vxlan_nolocalbypass.sh to run it in unique namespace [net-next,5/9] selftests/net: convert test_vxlan_under_vrf.sh to run it in unique namespace [net-next,6/9] selftests/net: convert test_vxlan_vnifiltering.sh to run it in unique namespace [net-next,7/9] selftests/net: convert vrf_route_leaking.sh to run it in unique namespace [net-next,8/9] selftests/net: convert vrf_strict_mode_test.sh to run it in unique namespace [net-next,9/9] selftests/net: convert vrf-xfrm-tests.sh to run it in unique namespace

diff --git a/tools/testing/selftests/net/test_bridge_neigh_suppress.sh b/tools/testing/selftests/net/test_bridge_neigh_suppress.sh index d80f2cd87614..8533393a4f18 100755 --- a/tools/testing/selftests/net/test_bridge_neigh_suppress.sh +++ b/tools/testing/selftests/net/test_bridge_neigh_suppress.sh @@ -45,9 +45,8 @@ # | sw1 | | sw2 | # +------------------------------------+ +------------------------------------+ +source lib.sh ret=0 -# Kselftest framework requirement - SKIP code is 4. -ksft_skip=4 # All tests in this script. Can be overridden with -t option. TESTS=" @@ -140,9 +139,6 @@ setup_topo_ns() { local ns=$1; shift - ip netns add $ns - ip -n $ns link set dev lo up - ip netns exec $ns sysctl -qw net.ipv6.conf.all.keep_addr_on_down=1 ip netns exec $ns sysctl -qw net.ipv6.conf.default.ignore_routes_with_linkdown=1 ip netns exec $ns sysctl -qw net.ipv6.conf.all.accept_dad=0 @@ -153,21 +149,22 @@ setup_topo() { local ns - for ns in h1 h2 sw1 sw2; do + setup_ns h1 h2 sw1 sw2 + for ns in $h1 $h2 $sw1 $sw2; do setup_topo_ns $ns done ip link add name veth0 type veth peer name veth1 - ip link set dev veth0 netns h1 name eth0 - ip link set dev veth1 netns sw1 name swp1 + ip link set dev veth0 netns $h1 name eth0 + ip link set dev veth1 netns $sw1 name swp1 ip link add name veth0 type veth peer name veth1 - ip link set dev veth0 netns sw1 name veth0 - ip link set dev veth1 netns sw2 name veth0 + ip link set dev veth0 netns $sw1 name veth0 + ip link set dev veth1 netns $sw2 name veth0 ip link add name veth0 type veth peer name veth1 - ip link set dev veth0 netns h2 name eth0 - ip link set dev veth1 netns sw2 name swp1 + ip link set dev veth0 netns $h2 name eth0 + ip link set dev veth1 netns $sw2 name swp1 } setup_host_common() @@ -190,7 +187,7 @@ setup_host_common() setup_h1() { - local ns=h1 + local ns=$h1 local v4addr1=192.0.2.1/28 local v4addr2=192.0.2.17/28 local v6addr1=2001:db8:1::1/64 @@ -201,7 +198,7 @@ setup_h1() setup_h2() { - local ns=h2 + local ns=$h2 local v4addr1=192.0.2.2/28 local v4addr2=192.0.2.18/28 local v6addr1=2001:db8:1::2/64 @@ -254,7 +251,7 @@ setup_sw_common() setup_sw1() { - local ns=sw1 + local ns=$sw1 local local_addr=192.0.2.33 local remote_addr=192.0.2.34 local veth_addr=192.0.2.49 @@ -265,7 +262,7 @@ setup_sw1() setup_sw2() { - local ns=sw2 + local ns=$sw2 local local_addr=192.0.2.34 local remote_addr=192.0.2.33 local veth_addr=192.0.2.50 @@ -291,11 +288,7 @@ setup() cleanup() { - local ns - - for ns in h1 h2 sw1 sw2; do - ip netns del $ns &> /dev/null - done + cleanup_ns $h1 $h2 $sw1 $sw2 } ################################################################################ @@ -312,80 +305,80 @@ neigh_suppress_arp_common() echo "Per-port ARP suppression - VLAN $vid" echo "----------------------------------" - run_cmd "tc -n sw1 qdisc replace dev vx0 clsact" - run_cmd "tc -n sw1 filter replace dev vx0 egress pref 1 handle 101 proto 0x0806 flower indev swp1 arp_tip $tip arp_sip $sip arp_op request action pass" + run_cmd "tc -n $sw1 qdisc replace dev vx0 clsact" + run_cmd "tc -n $sw1 filter replace dev vx0 egress pref 1 handle 101 proto 0x0806 flower indev swp1 arp_tip $tip arp_sip $sip arp_op request action pass" # Initial state - check that ARP requests are not suppressed and that # ARP replies are received. - run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip" + run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip" log_test $? 0 "arping" - tc_check_packets sw1 "dev vx0 egress" 101 1 + tc_check_packets $sw1 "dev vx0 egress" 101 1 log_test $? 0 "ARP suppression" # Enable neighbor suppression and check that nothing changes compared # to the initial state. - run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress on" - run_cmd "bridge -n sw1 -d link show dev vx0 | grep \"neigh_suppress on\"" + run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress on" + run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_suppress on\"" log_test $? 0 "\"neigh_suppress\" is on" - run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip" + run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip" log_test $? 0 "arping" - tc_check_packets sw1 "dev vx0 egress" 101 2 + tc_check_packets $sw1 "dev vx0 egress" 101 2 log_test $? 0 "ARP suppression" # Install an FDB entry for the remote host and check that nothing # changes compared to the initial state. - h2_mac=$(ip -n h2 -j -p link show eth0.$vid | jq -r '.[]["address"]') - run_cmd "bridge -n sw1 fdb replace $h2_mac dev vx0 master static vlan $vid" + h2_mac=$(ip -n $h2 -j -p link show eth0.$vid | jq -r '.[]["address"]') + run_cmd "bridge -n $sw1 fdb replace $h2_mac dev vx0 master static vlan $vid" log_test $? 0 "FDB entry installation" - run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip" + run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip" log_test $? 0 "arping" - tc_check_packets sw1 "dev vx0 egress" 101 3 + tc_check_packets $sw1 "dev vx0 egress" 101 3 log_test $? 0 "ARP suppression" # Install a neighbor on the matching SVI interface and check that ARP # requests are suppressed. - run_cmd "ip -n sw1 neigh replace $tip lladdr $h2_mac nud permanent dev br0.$vid" + run_cmd "ip -n $sw1 neigh replace $tip lladdr $h2_mac nud permanent dev br0.$vid" log_test $? 0 "Neighbor entry installation" - run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip" + run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip" log_test $? 0 "arping" - tc_check_packets sw1 "dev vx0 egress" 101 3 + tc_check_packets $sw1 "dev vx0 egress" 101 3 log_test $? 0 "ARP suppression" # Take the second host down and check that ARP requests are suppressed # and that ARP replies are received. - run_cmd "ip -n h2 link set dev eth0.$vid down" + run_cmd "ip -n $h2 link set dev eth0.$vid down" log_test $? 0 "H2 down" - run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip" + run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip" log_test $? 0 "arping" - tc_check_packets sw1 "dev vx0 egress" 101 3 + tc_check_packets $sw1 "dev vx0 egress" 101 3 log_test $? 0 "ARP suppression" - run_cmd "ip -n h2 link set dev eth0.$vid up" + run_cmd "ip -n $h2 link set dev eth0.$vid up" log_test $? 0 "H2 up" # Disable neighbor suppression and check that ARP requests are no # longer suppressed. - run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress off" - run_cmd "bridge -n sw1 -d link show dev vx0 | grep \"neigh_suppress off\"" + run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress off" + run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_suppress off\"" log_test $? 0 "\"neigh_suppress\" is off" - run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip" + run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip" log_test $? 0 "arping" - tc_check_packets sw1 "dev vx0 egress" 101 4 + tc_check_packets $sw1 "dev vx0 egress" 101 4 log_test $? 0 "ARP suppression" # Take the second host down and check that ARP requests are not # suppressed and that ARP replies are not received. - run_cmd "ip -n h2 link set dev eth0.$vid down" + run_cmd "ip -n $h2 link set dev eth0.$vid down" log_test $? 0 "H2 down" - run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip" + run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip" log_test $? 1 "arping" - tc_check_packets sw1 "dev vx0 egress" 101 5 + tc_check_packets $sw1 "dev vx0 egress" 101 5 log_test $? 0 "ARP suppression" } @@ -415,80 +408,80 @@ neigh_suppress_ns_common() echo "Per-port NS suppression - VLAN $vid" echo "---------------------------------" - run_cmd "tc -n sw1 qdisc replace dev vx0 clsact" - run_cmd "tc -n sw1 filter replace dev vx0 egress pref 1 handle 101 proto ipv6 flower indev swp1 ip_proto icmpv6 dst_ip $maddr src_ip $saddr type 135 code 0 action pass" + run_cmd "tc -n $sw1 qdisc replace dev vx0 clsact" + run_cmd "tc -n $sw1 filter replace dev vx0 egress pref 1 handle 101 proto ipv6 flower indev swp1 ip_proto icmpv6 dst_ip $maddr src_ip $saddr type 135 code 0 action pass" # Initial state - check that NS messages are not suppressed and that ND # messages are received. - run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid" + run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid" log_test $? 0 "ndisc6" - tc_check_packets sw1 "dev vx0 egress" 101 1 + tc_check_packets $sw1 "dev vx0 egress" 101 1 log_test $? 0 "NS suppression" # Enable neighbor suppression and check that nothing changes compared # to the initial state. - run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress on" - run_cmd "bridge -n sw1 -d link show dev vx0 | grep \"neigh_suppress on\"" + run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress on" + run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_suppress on\"" log_test $? 0 "\"neigh_suppress\" is on" - run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid" + run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid" log_test $? 0 "ndisc6" - tc_check_packets sw1 "dev vx0 egress" 101 2 + tc_check_packets $sw1 "dev vx0 egress" 101 2 log_test $? 0 "NS suppression" # Install an FDB entry for the remote host and check that nothing # changes compared to the initial state. - h2_mac=$(ip -n h2 -j -p link show eth0.$vid | jq -r '.[]["address"]') - run_cmd "bridge -n sw1 fdb replace $h2_mac dev vx0 master static vlan $vid" + h2_mac=$(ip -n $h2 -j -p link show eth0.$vid | jq -r '.[]["address"]') + run_cmd "bridge -n $sw1 fdb replace $h2_mac dev vx0 master static vlan $vid" log_test $? 0 "FDB entry installation" - run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid" + run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid" log_test $? 0 "ndisc6" - tc_check_packets sw1 "dev vx0 egress" 101 3 + tc_check_packets $sw1 "dev vx0 egress" 101 3 log_test $? 0 "NS suppression" # Install a neighbor on the matching SVI interface and check that NS # messages are suppressed. - run_cmd "ip -n sw1 neigh replace $daddr lladdr $h2_mac nud permanent dev br0.$vid" + run_cmd "ip -n $sw1 neigh replace $daddr lladdr $h2_mac nud permanent dev br0.$vid" log_test $? 0 "Neighbor entry installation" - run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid" + run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid" log_test $? 0 "ndisc6" - tc_check_packets sw1 "dev vx0 egress" 101 3 + tc_check_packets $sw1 "dev vx0 egress" 101 3 log_test $? 0 "NS suppression" # Take the second host down and check that NS messages are suppressed # and that ND messages are received. - run_cmd "ip -n h2 link set dev eth0.$vid down" + run_cmd "ip -n $h2 link set dev eth0.$vid down" log_test $? 0 "H2 down" - run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid" + run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid" log_test $? 0 "ndisc6" - tc_check_packets sw1 "dev vx0 egress" 101 3 + tc_check_packets $sw1 "dev vx0 egress" 101 3 log_test $? 0 "NS suppression" - run_cmd "ip -n h2 link set dev eth0.$vid up" + run_cmd "ip -n $h2 link set dev eth0.$vid up" log_test $? 0 "H2 up" # Disable neighbor suppression and check that NS messages are no longer # suppressed. - run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress off" - run_cmd "bridge -n sw1 -d link show dev vx0 | grep \"neigh_suppress off\"" + run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress off" + run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_suppress off\"" log_test $? 0 "\"neigh_suppress\" is off" - run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid" + run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid" log_test $? 0 "ndisc6" - tc_check_packets sw1 "dev vx0 egress" 101 4 + tc_check_packets $sw1 "dev vx0 egress" 101 4 log_test $? 0 "NS suppression" # Take the second host down and check that NS messages are not # suppressed and that ND messages are not received. - run_cmd "ip -n h2 link set dev eth0.$vid down" + run_cmd "ip -n $h2 link set dev eth0.$vid down" log_test $? 0 "H2 down" - run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid" + run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid" log_test $? 2 "ndisc6" - tc_check_packets sw1 "dev vx0 egress" 101 5 + tc_check_packets $sw1 "dev vx0 egress" 101 5 log_test $? 0 "NS suppression" } @@ -524,118 +517,118 @@ neigh_vlan_suppress_arp() echo "Per-{Port, VLAN} ARP suppression" echo "--------------------------------" - run_cmd "tc -n sw1 qdisc replace dev vx0 clsact" - run_cmd "tc -n sw1 filter replace dev vx0 egress pref 1 handle 101 proto 0x0806 flower indev swp1 arp_tip $tip1 arp_sip $sip1 arp_op request action pass" - run_cmd "tc -n sw1 filter replace dev vx0 egress pref 1 handle 102 proto 0x0806 flower indev swp1 arp_tip $tip2 arp_sip $sip2 arp_op request action pass" + run_cmd "tc -n $sw1 qdisc replace dev vx0 clsact" + run_cmd "tc -n $sw1 filter replace dev vx0 egress pref 1 handle 101 proto 0x0806 flower indev swp1 arp_tip $tip1 arp_sip $sip1 arp_op request action pass" + run_cmd "tc -n $sw1 filter replace dev vx0 egress pref 1 handle 102 proto 0x0806 flower indev swp1 arp_tip $tip2 arp_sip $sip2 arp_op request action pass" - h2_mac1=$(ip -n h2 -j -p link show eth0.$vid1 | jq -r '.[]["address"]') - h2_mac2=$(ip -n h2 -j -p link show eth0.$vid2 | jq -r '.[]["address"]') - run_cmd "bridge -n sw1 fdb replace $h2_mac1 dev vx0 master static vlan $vid1" - run_cmd "bridge -n sw1 fdb replace $h2_mac2 dev vx0 master static vlan $vid2" - run_cmd "ip -n sw1 neigh replace $tip1 lladdr $h2_mac1 nud permanent dev br0.$vid1" - run_cmd "ip -n sw1 neigh replace $tip2 lladdr $h2_mac2 nud permanent dev br0.$vid2" + h2_mac1=$(ip -n $h2 -j -p link show eth0.$vid1 | jq -r '.[]["address"]') + h2_mac2=$(ip -n $h2 -j -p link show eth0.$vid2 | jq -r '.[]["address"]') + run_cmd "bridge -n $sw1 fdb replace $h2_mac1 dev vx0 master static vlan $vid1" + run_cmd "bridge -n $sw1 fdb replace $h2_mac2 dev vx0 master static vlan $vid2" + run_cmd "ip -n $sw1 neigh replace $tip1 lladdr $h2_mac1 nud permanent dev br0.$vid1" + run_cmd "ip -n $sw1 neigh replace $tip2 lladdr $h2_mac2 nud permanent dev br0.$vid2" # Enable per-{Port, VLAN} neighbor suppression and check that ARP # requests are not suppressed and that ARP replies are received. - run_cmd "bridge -n sw1 link set dev vx0 neigh_vlan_suppress on" - run_cmd "bridge -n sw1 -d link show dev vx0 | grep \"neigh_vlan_suppress on\"" + run_cmd "bridge -n $sw1 link set dev vx0 neigh_vlan_suppress on" + run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_vlan_suppress on\"" log_test $? 0 "\"neigh_vlan_suppress\" is on" - run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1" + run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1" log_test $? 0 "arping (VLAN $vid1)" - run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2" + run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2" log_test $? 0 "arping (VLAN $vid2)" - tc_check_packets sw1 "dev vx0 egress" 101 1 + tc_check_packets $sw1 "dev vx0 egress" 101 1 log_test $? 0 "ARP suppression (VLAN $vid1)" - tc_check_packets sw1 "dev vx0 egress" 102 1 + tc_check_packets $sw1 "dev vx0 egress" 102 1 log_test $? 0 "ARP suppression (VLAN $vid2)" # Enable neighbor suppression on VLAN 10 and check that only on this # VLAN ARP requests are suppressed. - run_cmd "bridge -n sw1 vlan set vid $vid1 dev vx0 neigh_suppress on" - run_cmd "bridge -n sw1 -d vlan show dev vx0 vid $vid1 | grep \"neigh_suppress on\"" + run_cmd "bridge -n $sw1 vlan set vid $vid1 dev vx0 neigh_suppress on" + run_cmd "bridge -n $sw1 -d vlan show dev vx0 vid $vid1 | grep \"neigh_suppress on\"" log_test $? 0 "\"neigh_suppress\" is on (VLAN $vid1)" - run_cmd "bridge -n sw1 -d vlan show dev vx0 vid $vid2 | grep \"neigh_suppress off\"" + run_cmd "bridge -n $sw1 -d vlan show dev vx0 vid $vid2 | grep \"neigh_suppress off\"" log_test $? 0 "\"neigh_suppress\" is off (VLAN $vid2)" - run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1" + run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1" log_test $? 0 "arping (VLAN $vid1)" - run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2" + run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2" log_test $? 0 "arping (VLAN $vid2)" - tc_check_packets sw1 "dev vx0 egress" 101 1 + tc_check_packets $sw1 "dev vx0 egress" 101 1 log_test $? 0 "ARP suppression (VLAN $vid1)" - tc_check_packets sw1 "dev vx0 egress" 102 2 + tc_check_packets $sw1 "dev vx0 egress" 102 2 log_test $? 0 "ARP suppression (VLAN $vid2)" # Enable neighbor suppression on the port and check that it has no # effect compared to previous state. - run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress on" - run_cmd "bridge -n sw1 -d link show dev vx0 | grep \"neigh_suppress on\"" + run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress on" + run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_suppress on\"" log_test $? 0 "\"neigh_suppress\" is on" - run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1" + run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1" log_test $? 0 "arping (VLAN $vid1)" - run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2" + run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2" log_test $? 0 "arping (VLAN $vid2)" - tc_check_packets sw1 "dev vx0 egress" 101 1 + tc_check_packets $sw1 "dev vx0 egress" 101 1 log_test $? 0 "ARP suppression (VLAN $vid1)" - tc_check_packets sw1 "dev vx0 egress" 102 3 + tc_check_packets $sw1 "dev vx0 egress" 102 3 log_test $? 0 "ARP suppression (VLAN $vid2)" # Disable neighbor suppression on the port and check that it has no # effect compared to previous state. - run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress off" - run_cmd "bridge -n sw1 -d link show dev vx0 | grep \"neigh_suppress off\"" + run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress off" + run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_suppress off\"" log_test $? 0 "\"neigh_suppress\" is off" - run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1" + run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1" log_test $? 0 "arping (VLAN $vid1)" - run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2" + run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2" log_test $? 0 "arping (VLAN $vid2)" - tc_check_packets sw1 "dev vx0 egress" 101 1 + tc_check_packets $sw1 "dev vx0 egress" 101 1 log_test $? 0 "ARP suppression (VLAN $vid1)" - tc_check_packets sw1 "dev vx0 egress" 102 4 + tc_check_packets $sw1 "dev vx0 egress" 102 4 log_test $? 0 "ARP suppression (VLAN $vid2)" # Disable neighbor suppression on VLAN 10 and check that ARP requests # are no longer suppressed on this VLAN. - run_cmd "bridge -n sw1 vlan set vid $vid1 dev vx0 neigh_suppress off" - run_cmd "bridge -n sw1 -d vlan show dev vx0 vid $vid1 | grep \"neigh_suppress off\"" + run_cmd "bridge -n $sw1 vlan set vid $vid1 dev vx0 neigh_suppress off" + run_cmd "bridge -n $sw1 -d vlan show dev vx0 vid $vid1 | grep \"neigh_suppress off\"" log_test $? 0 "\"neigh_suppress\" is off (VLAN $vid1)" - run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1" + run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1" log_test $? 0 "arping (VLAN $vid1)" - run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2" + run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2" log_test $? 0 "arping (VLAN $vid2)" - tc_check_packets sw1 "dev vx0 egress" 101 2 + tc_check_packets $sw1 "dev vx0 egress" 101 2 log_test $? 0 "ARP suppression (VLAN $vid1)" - tc_check_packets sw1 "dev vx0 egress" 102 5 + tc_check_packets $sw1 "dev vx0 egress" 102 5 log_test $? 0 "ARP suppression (VLAN $vid2)" # Disable per-{Port, VLAN} neighbor suppression, enable neighbor # suppression on the port and check that on both VLANs ARP requests are # suppressed. - run_cmd "bridge -n sw1 link set dev vx0 neigh_vlan_suppress off" - run_cmd "bridge -n sw1 -d link show dev vx0 | grep \"neigh_vlan_suppress off\"" + run_cmd "bridge -n $sw1 link set dev vx0 neigh_vlan_suppress off" + run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_vlan_suppress off\"" log_test $? 0 "\"neigh_vlan_suppress\" is off" - run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress on" - run_cmd "bridge -n sw1 -d link show dev vx0 | grep \"neigh_suppress on\"" + run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress on" + run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_suppress on\"" log_test $? 0 "\"neigh_suppress\" is on" - run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1" + run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1" log_test $? 0 "arping (VLAN $vid1)" - run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2" + run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2" log_test $? 0 "arping (VLAN $vid2)" - tc_check_packets sw1 "dev vx0 egress" 101 2 + tc_check_packets $sw1 "dev vx0 egress" 101 2 log_test $? 0 "ARP suppression (VLAN $vid1)" - tc_check_packets sw1 "dev vx0 egress" 102 5 + tc_check_packets $sw1 "dev vx0 egress" 102 5 log_test $? 0 "ARP suppression (VLAN $vid2)" } @@ -655,118 +648,118 @@ neigh_vlan_suppress_ns() echo "Per-{Port, VLAN} NS suppression" echo "-------------------------------" - run_cmd "tc -n sw1 qdisc replace dev vx0 clsact" - run_cmd "tc -n sw1 filter replace dev vx0 egress pref 1 handle 101 proto ipv6 flower indev swp1 ip_proto icmpv6 dst_ip $maddr src_ip $saddr1 type 135 code 0 action pass" - run_cmd "tc -n sw1 filter replace dev vx0 egress pref 1 handle 102 proto ipv6 flower indev swp1 ip_proto icmpv6 dst_ip $maddr src_ip $saddr2 type 135 code 0 action pass" + run_cmd "tc -n $sw1 qdisc replace dev vx0 clsact" + run_cmd "tc -n $sw1 filter replace dev vx0 egress pref 1 handle 101 proto ipv6 flower indev swp1 ip_proto icmpv6 dst_ip $maddr src_ip $saddr1 type 135 code 0 action pass" + run_cmd "tc -n $sw1 filter replace dev vx0 egress pref 1 handle 102 proto ipv6 flower indev swp1 ip_proto icmpv6 dst_ip $maddr src_ip $saddr2 type 135 code 0 action pass" - h2_mac1=$(ip -n h2 -j -p link show eth0.$vid1 | jq -r '.[]["address"]') - h2_mac2=$(ip -n h2 -j -p link show eth0.$vid2 | jq -r '.[]["address"]') - run_cmd "bridge -n sw1 fdb replace $h2_mac1 dev vx0 master static vlan $vid1" - run_cmd "bridge -n sw1 fdb replace $h2_mac2 dev vx0 master static vlan $vid2" - run_cmd "ip -n sw1 neigh replace $daddr1 lladdr $h2_mac1 nud permanent dev br0.$vid1" - run_cmd "ip -n sw1 neigh replace $daddr2 lladdr $h2_mac2 nud permanent dev br0.$vid2" + h2_mac1=$(ip -n $h2 -j -p link show eth0.$vid1 | jq -r '.[]["address"]') + h2_mac2=$(ip -n $h2 -j -p link show eth0.$vid2 | jq -r '.[]["address"]') + run_cmd "bridge -n $sw1 fdb replace $h2_mac1 dev vx0 master static vlan $vid1" + run_cmd "bridge -n $sw1 fdb replace $h2_mac2 dev vx0 master static vlan $vid2" + run_cmd "ip -n $sw1 neigh replace $daddr1 lladdr $h2_mac1 nud permanent dev br0.$vid1" + run_cmd "ip -n $sw1 neigh replace $daddr2 lladdr $h2_mac2 nud permanent dev br0.$vid2" # Enable per-{Port, VLAN} neighbor suppression and check that NS # messages are not suppressed and that ND messages are received. - run_cmd "bridge -n sw1 link set dev vx0 neigh_vlan_suppress on" - run_cmd "bridge -n sw1 -d link show dev vx0 | grep \"neigh_vlan_suppress on\"" + run_cmd "bridge -n $sw1 link set dev vx0 neigh_vlan_suppress on" + run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_vlan_suppress on\"" log_test $? 0 "\"neigh_vlan_suppress\" is on" - run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1" + run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1" log_test $? 0 "ndisc6 (VLAN $vid1)" - run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2" + run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2" log_test $? 0 "ndisc6 (VLAN $vid2)" - tc_check_packets sw1 "dev vx0 egress" 101 1 + tc_check_packets $sw1 "dev vx0 egress" 101 1 log_test $? 0 "NS suppression (VLAN $vid1)" - tc_check_packets sw1 "dev vx0 egress" 102 1 + tc_check_packets $sw1 "dev vx0 egress" 102 1 log_test $? 0 "NS suppression (VLAN $vid2)" # Enable neighbor suppression on VLAN 10 and check that only on this # VLAN NS messages are suppressed. - run_cmd "bridge -n sw1 vlan set vid $vid1 dev vx0 neigh_suppress on" - run_cmd "bridge -n sw1 -d vlan show dev vx0 vid $vid1 | grep \"neigh_suppress on\"" + run_cmd "bridge -n $sw1 vlan set vid $vid1 dev vx0 neigh_suppress on" + run_cmd "bridge -n $sw1 -d vlan show dev vx0 vid $vid1 | grep \"neigh_suppress on\"" log_test $? 0 "\"neigh_suppress\" is on (VLAN $vid1)" - run_cmd "bridge -n sw1 -d vlan show dev vx0 vid $vid2 | grep \"neigh_suppress off\"" + run_cmd "bridge -n $sw1 -d vlan show dev vx0 vid $vid2 | grep \"neigh_suppress off\"" log_test $? 0 "\"neigh_suppress\" is off (VLAN $vid2)" - run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1" + run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1" log_test $? 0 "ndisc6 (VLAN $vid1)" - run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2" + run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2" log_test $? 0 "ndisc6 (VLAN $vid2)" - tc_check_packets sw1 "dev vx0 egress" 101 1 + tc_check_packets $sw1 "dev vx0 egress" 101 1 log_test $? 0 "NS suppression (VLAN $vid1)" - tc_check_packets sw1 "dev vx0 egress" 102 2 + tc_check_packets $sw1 "dev vx0 egress" 102 2 log_test $? 0 "NS suppression (VLAN $vid2)" # Enable neighbor suppression on the port and check that it has no # effect compared to previous state. - run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress on" - run_cmd "bridge -n sw1 -d link show dev vx0 | grep \"neigh_suppress on\"" + run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress on" + run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_suppress on\"" log_test $? 0 "\"neigh_suppress\" is on" - run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1" + run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1" log_test $? 0 "ndisc6 (VLAN $vid1)" - run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2" + run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2" log_test $? 0 "ndisc6 (VLAN $vid2)" - tc_check_packets sw1 "dev vx0 egress" 101 1 + tc_check_packets $sw1 "dev vx0 egress" 101 1 log_test $? 0 "NS suppression (VLAN $vid1)" - tc_check_packets sw1 "dev vx0 egress" 102 3 + tc_check_packets $sw1 "dev vx0 egress" 102 3 log_test $? 0 "NS suppression (VLAN $vid2)" # Disable neighbor suppression on the port and check that it has no # effect compared to previous state. - run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress off" - run_cmd "bridge -n sw1 -d link show dev vx0 | grep \"neigh_suppress off\"" + run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress off" + run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_suppress off\"" log_test $? 0 "\"neigh_suppress\" is off" - run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1" + run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1" log_test $? 0 "ndisc6 (VLAN $vid1)" - run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2" + run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2" log_test $? 0 "ndisc6 (VLAN $vid2)" - tc_check_packets sw1 "dev vx0 egress" 101 1 + tc_check_packets $sw1 "dev vx0 egress" 101 1 log_test $? 0 "NS suppression (VLAN $vid1)" - tc_check_packets sw1 "dev vx0 egress" 102 4 + tc_check_packets $sw1 "dev vx0 egress" 102 4 log_test $? 0 "NS suppression (VLAN $vid2)" # Disable neighbor suppression on VLAN 10 and check that NS messages # are no longer suppressed on this VLAN. - run_cmd "bridge -n sw1 vlan set vid $vid1 dev vx0 neigh_suppress off" - run_cmd "bridge -n sw1 -d vlan show dev vx0 vid $vid1 | grep \"neigh_suppress off\"" + run_cmd "bridge -n $sw1 vlan set vid $vid1 dev vx0 neigh_suppress off" + run_cmd "bridge -n $sw1 -d vlan show dev vx0 vid $vid1 | grep \"neigh_suppress off\"" log_test $? 0 "\"neigh_suppress\" is off (VLAN $vid1)" - run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1" + run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1" log_test $? 0 "ndisc6 (VLAN $vid1)" - run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2" + run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2" log_test $? 0 "ndisc6 (VLAN $vid2)" - tc_check_packets sw1 "dev vx0 egress" 101 2 + tc_check_packets $sw1 "dev vx0 egress" 101 2 log_test $? 0 "NS suppression (VLAN $vid1)" - tc_check_packets sw1 "dev vx0 egress" 102 5 + tc_check_packets $sw1 "dev vx0 egress" 102 5 log_test $? 0 "NS suppression (VLAN $vid2)" # Disable per-{Port, VLAN} neighbor suppression, enable neighbor # suppression on the port and check that on both VLANs NS messages are # suppressed. - run_cmd "bridge -n sw1 link set dev vx0 neigh_vlan_suppress off" - run_cmd "bridge -n sw1 -d link show dev vx0 | grep \"neigh_vlan_suppress off\"" + run_cmd "bridge -n $sw1 link set dev vx0 neigh_vlan_suppress off" + run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_vlan_suppress off\"" log_test $? 0 "\"neigh_vlan_suppress\" is off" - run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress on" - run_cmd "bridge -n sw1 -d link show dev vx0 | grep \"neigh_suppress on\"" + run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress on" + run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_suppress on\"" log_test $? 0 "\"neigh_suppress\" is on" - run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1" + run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1" log_test $? 0 "ndisc6 (VLAN $vid1)" - run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2" + run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2" log_test $? 0 "ndisc6 (VLAN $vid2)" - tc_check_packets sw1 "dev vx0 egress" 101 2 + tc_check_packets $sw1 "dev vx0 egress" 101 2 log_test $? 0 "NS suppression (VLAN $vid1)" - tc_check_packets sw1 "dev vx0 egress" 102 5 + tc_check_packets $sw1 "dev vx0 egress" 102 5 log_test $? 0 "NS suppression (VLAN $vid2)" }

[net-next,2/9] selftests/net: convert test_bridge_neigh_suppress.sh to run it in unique namespace

Commit Message

Comments

Patch