[PATCHv2,net-next,12/13] selftests/net: convert fib_tests.sh to run it in unique namespace

Commit Message

Hangbin Liu Dec. 13, 2023, 6:08 a.m. UTC

Here is the test result after conversion.

 # ./fib_tests.sh

 Single path route test
     Start point
     TEST: IPv4 fibmatch                                                 [ OK ]

 ...

 Fib6 garbage collection test
     TEST: ipv6 route garbage collection                                 [ OK ]

 IPv4 multipath list receive tests
     TEST: Multipath route hit ratio (1.00)                              [ OK ]

 IPv6 multipath list receive tests
     TEST: Multipath route hit ratio (1.00)                              [ OK ]

 Tests passed: 225
 Tests failed:   0

Acked-by: David Ahern <[e-mail]>
Signed-off-by: Hangbin Liu <[e-mail]>
---
 tools/testing/selftests/net/fib_tests.sh | 184 +++++++++++------------
 1 file changed, 87 insertions(+), 97 deletions(-)

Comments

Ido Schimmel Dec. 13, 2023, 1:51 p.m. UTC | #1

On Wed, Dec 13, 2023 at 02:08:55PM +0800, Hangbin Liu wrote:
> Here is the test result after conversion.
> 
>  # ./fib_tests.sh
> 
>  Single path route test
>      Start point
>      TEST: IPv4 fibmatch                                                 [ OK ]
> 
>  ...
> 
>  Fib6 garbage collection test
>      TEST: ipv6 route garbage collection                                 [ OK ]
> 
>  IPv4 multipath list receive tests
>      TEST: Multipath route hit ratio (1.00)                              [ OK ]
> 
>  IPv6 multipath list receive tests
>      TEST: Multipath route hit ratio (1.00)                              [ OK ]
> 
>  Tests passed: 225
>  Tests failed:   0
> 
> Acked-by: David Ahern <[e-mail]>
> Signed-off-by: Hangbin Liu <[e-mail]>

Reviewed-by: Ido Schimmel <[e-mail]>
Tested-by: Ido Schimmel <[e-mail]>

Patch

diff --git a/tools/testing/selftests/net/fib_tests.sh b/tools/testing/selftests/net/fib_tests.sh
index 66d0db7a2614..b3ecccbbfcd2 100755
--- a/tools/testing/selftests/net/fib_tests.sh
+++ b/tools/testing/selftests/net/fib_tests.sh
@@ -3,10 +3,8 @@ 
 
 # This test is for checking IPv4 and IPv6 FIB behavior in response to
 # different events.
-
+source lib.sh
 ret=0
-# Kselftest framework requirement - SKIP code is 4.
-ksft_skip=4
 
 # all tests in this script. Can be overridden with -t option
 TESTS="unregister down carrier nexthop suppress ipv6_notify ipv4_notify \
@@ -18,8 +16,6 @@  TESTS="unregister down carrier nexthop suppress ipv6_notify ipv4_notify \
 VERBOSE=0
 PAUSE_ON_FAIL=no
 PAUSE=no
-IP="$(which ip) -netns ns1"
-NS_EXEC="$(which ip) netns exec ns1"
 
 which ping6 > /dev/null 2>&1 && ping6=$(which ping6) || ping6=$(which ping)
 
@@ -55,11 +51,11 @@  log_test()
 setup()
 {
 	set -e
-	ip netns add ns1
-	ip netns set ns1 auto
-	$IP link set dev lo up
-	ip netns exec ns1 sysctl -qw net.ipv4.ip_forward=1
-	ip netns exec ns1 sysctl -qw net.ipv6.conf.all.forwarding=1
+	setup_ns ns1
+	IP="$(which ip) -netns $ns1"
+	NS_EXEC="$(which ip) netns exec $ns1"
+	ip netns exec $ns1 sysctl -qw net.ipv4.ip_forward=1
+	ip netns exec $ns1 sysctl -qw net.ipv6.conf.all.forwarding=1
 
 	$IP link add dummy0 type dummy
 	$IP link set dev dummy0 up
@@ -72,8 +68,7 @@  setup()
 cleanup()
 {
 	$IP link del dev dummy0 &> /dev/null
-	ip netns del ns1 &> /dev/null
-	ip netns del ns2 &> /dev/null
+	cleanup_ns $ns1 $ns2
 }
 
 get_linklocal()
@@ -448,28 +443,25 @@  fib_rp_filter_test()
 	setup
 
 	set -e
-	ip netns add ns2
-	ip netns set ns2 auto
-
-	ip -netns ns2 link set dev lo up
+	setup_ns ns2
 
 	$IP link add name veth1 type veth peer name veth2
-	$IP link set dev veth2 netns ns2
+	$IP link set dev veth2 netns $ns2
 	$IP address add 192.0.2.1/24 dev veth1
-	ip -netns ns2 address add 192.0.2.1/24 dev veth2
+	ip -netns $ns2 address add 192.0.2.1/24 dev veth2
 	$IP link set dev veth1 up
-	ip -netns ns2 link set dev veth2 up
+	ip -netns $ns2 link set dev veth2 up
 
 	$IP link set dev lo address 52:54:00:6a:c7:5e
 	$IP link set dev veth1 address 52:54:00:6a:c7:5e
-	ip -netns ns2 link set dev lo address 52:54:00:6a:c7:5e
-	ip -netns ns2 link set dev veth2 address 52:54:00:6a:c7:5e
+	ip -netns $ns2 link set dev lo address 52:54:00:6a:c7:5e
+	ip -netns $ns2 link set dev veth2 address 52:54:00:6a:c7:5e
 
 	# 1. (ns2) redirect lo's egress to veth2's egress
-	ip netns exec ns2 tc qdisc add dev lo parent root handle 1: fq_codel
-	ip netns exec ns2 tc filter add dev lo parent 1: protocol arp basic \
+	ip netns exec $ns2 tc qdisc add dev lo parent root handle 1: fq_codel
+	ip netns exec $ns2 tc filter add dev lo parent 1: protocol arp basic \
 		action mirred egress redirect dev veth2
-	ip netns exec ns2 tc filter add dev lo parent 1: protocol ip basic \
+	ip netns exec $ns2 tc filter add dev lo parent 1: protocol ip basic \
 		action mirred egress redirect dev veth2
 
 	# 2. (ns1) redirect veth1's ingress to lo's ingress
@@ -487,24 +479,24 @@  fib_rp_filter_test()
 		action mirred egress redirect dev veth1
 
 	# 4. (ns2) redirect veth2's ingress to lo's ingress
-	ip netns exec ns2 tc qdisc add dev veth2 ingress
-	ip netns exec ns2 tc filter add dev veth2 ingress protocol arp basic \
+	ip netns exec $ns2 tc qdisc add dev veth2 ingress
+	ip netns exec $ns2 tc filter add dev veth2 ingress protocol arp basic \
 		action mirred ingress redirect dev lo
-	ip netns exec ns2 tc filter add dev veth2 ingress protocol ip basic \
+	ip netns exec $ns2 tc filter add dev veth2 ingress protocol ip basic \
 		action mirred ingress redirect dev lo
 
 	$NS_EXEC sysctl -qw net.ipv4.conf.all.rp_filter=1
 	$NS_EXEC sysctl -qw net.ipv4.conf.all.accept_local=1
 	$NS_EXEC sysctl -qw net.ipv4.conf.all.route_localnet=1
-	ip netns exec ns2 sysctl -qw net.ipv4.conf.all.rp_filter=1
-	ip netns exec ns2 sysctl -qw net.ipv4.conf.all.accept_local=1
-	ip netns exec ns2 sysctl -qw net.ipv4.conf.all.route_localnet=1
+	ip netns exec $ns2 sysctl -qw net.ipv4.conf.all.rp_filter=1
+	ip netns exec $ns2 sysctl -qw net.ipv4.conf.all.accept_local=1
+	ip netns exec $ns2 sysctl -qw net.ipv4.conf.all.route_localnet=1
 	set +e
 
-	run_cmd "ip netns exec ns2 ping -w1 -c1 192.0.2.1"
+	run_cmd "ip netns exec $ns2 ping -w1 -c1 192.0.2.1"
 	log_test $? 0 "rp_filter passes local packets"
 
-	run_cmd "ip netns exec ns2 ping -w1 -c1 127.0.0.1"
+	run_cmd "ip netns exec $ns2 ping -w1 -c1 127.0.0.1"
 	log_test $? 0 "rp_filter passes loopback packets"
 
 	cleanup
@@ -959,34 +951,32 @@  route_setup()
 	[ "${VERBOSE}" = "1" ] && set -x
 	set -e
 
-	ip netns add ns2
-	ip netns set ns2 auto
-	ip -netns ns2 link set dev lo up
-	ip netns exec ns2 sysctl -qw net.ipv4.ip_forward=1
-	ip netns exec ns2 sysctl -qw net.ipv6.conf.all.forwarding=1
+	setup_ns ns2
+	ip netns exec $ns2 sysctl -qw net.ipv4.ip_forward=1
+	ip netns exec $ns2 sysctl -qw net.ipv6.conf.all.forwarding=1
 
 	$IP li add veth1 type veth peer name veth2
 	$IP li add veth3 type veth peer name veth4
 
 	$IP li set veth1 up
 	$IP li set veth3 up
-	$IP li set veth2 netns ns2 up
-	$IP li set veth4 netns ns2 up
-	ip -netns ns2 li add dummy1 type dummy
-	ip -netns ns2 li set dummy1 up
+	$IP li set veth2 netns $ns2 up
+	$IP li set veth4 netns $ns2 up
+	ip -netns $ns2 li add dummy1 type dummy
+	ip -netns $ns2 li set dummy1 up
 
 	$IP -6 addr add 2001:db8:101::1/64 dev veth1 nodad
 	$IP -6 addr add 2001:db8:103::1/64 dev veth3 nodad
 	$IP addr add 172.16.101.1/24 dev veth1
 	$IP addr add 172.16.103.1/24 dev veth3
 
-	ip -netns ns2 -6 addr add 2001:db8:101::2/64 dev veth2 nodad
-	ip -netns ns2 -6 addr add 2001:db8:103::2/64 dev veth4 nodad
-	ip -netns ns2 -6 addr add 2001:db8:104::1/64 dev dummy1 nodad
+	ip -netns $ns2 -6 addr add 2001:db8:101::2/64 dev veth2 nodad
+	ip -netns $ns2 -6 addr add 2001:db8:103::2/64 dev veth4 nodad
+	ip -netns $ns2 -6 addr add 2001:db8:104::1/64 dev dummy1 nodad
 
-	ip -netns ns2 addr add 172.16.101.2/24 dev veth2
-	ip -netns ns2 addr add 172.16.103.2/24 dev veth4
-	ip -netns ns2 addr add 172.16.104.1/24 dev dummy1
+	ip -netns $ns2 addr add 172.16.101.2/24 dev veth2
+	ip -netns $ns2 addr add 172.16.103.2/24 dev veth4
+	ip -netns $ns2 addr add 172.16.104.1/24 dev dummy1
 
 	set +e
 }
@@ -1238,7 +1228,7 @@  ipv6_addr_metric_test()
 	log_test $rc 0 "Modify metric of address"
 
 	# verify prefix route removed on down
-	run_cmd "ip netns exec ns1 sysctl -qw net.ipv6.conf.all.keep_addr_on_down=1"
+	run_cmd "ip netns exec $ns1 sysctl -qw net.ipv6.conf.all.keep_addr_on_down=1"
 	run_cmd "$IP li set dev dummy2 down"
 	rc=$?
 	if [ $rc -eq 0 ]; then
@@ -1344,7 +1334,7 @@  ipv6_route_metrics_test()
 	log_test $rc 0 "Multipath route with mtu metric"
 
 	$IP -6 ro add 2001:db8:104::/64 via 2001:db8:101::2 mtu 1300
-	run_cmd "ip netns exec ns1 ${ping6} -w1 -c1 -s 1500 2001:db8:104::1"
+	run_cmd "ip netns exec $ns1 ${ping6} -w1 -c1 -s 1500 2001:db8:104::1"
 	log_test $? 0 "Using route with mtu metric"
 
 	run_cmd "$IP -6 ro add 2001:db8:114::/64 via  2001:db8:101::2  congctl lock foo"
@@ -1599,19 +1589,19 @@  ipv4_rt_replace()
 ipv4_local_rt_cache()
 {
 	run_cmd "ip addr add 10.0.0.1/32 dev lo"
-	run_cmd "ip netns add test-ns"
+	run_cmd "setup_ns test-ns"
 	run_cmd "ip link add veth-outside type veth peer name veth-inside"
 	run_cmd "ip link add vrf-100 type vrf table 1100"
 	run_cmd "ip link set veth-outside master vrf-100"
-	run_cmd "ip link set veth-inside netns test-ns"
+	run_cmd "ip link set veth-inside netns $test-ns"
 	run_cmd "ip link set veth-outside up"
 	run_cmd "ip link set vrf-100 up"
 	run_cmd "ip route add 10.1.1.1/32 dev veth-outside table 1100"
-	run_cmd "ip netns exec test-ns ip link set veth-inside up"
-	run_cmd "ip netns exec test-ns ip addr add 10.1.1.1/32 dev veth-inside"
-	run_cmd "ip netns exec test-ns ip route add 10.0.0.1/32 dev veth-inside"
-	run_cmd "ip netns exec test-ns ip route add default via 10.0.0.1"
-	run_cmd "ip netns exec test-ns ping 10.0.0.1 -c 1 -i 1"
+	run_cmd "ip netns exec $test-ns ip link set veth-inside up"
+	run_cmd "ip netns exec $test-ns ip addr add 10.1.1.1/32 dev veth-inside"
+	run_cmd "ip netns exec $test-ns ip route add 10.0.0.1/32 dev veth-inside"
+	run_cmd "ip netns exec $test-ns ip route add default via 10.0.0.1"
+	run_cmd "ip netns exec $test-ns ping 10.0.0.1 -c 1 -i 1"
 	run_cmd "ip link delete vrf-100"
 
 	# if we do not hang test is a success
@@ -1841,7 +1831,7 @@  ipv4_route_metrics_test()
 	log_test $rc 0 "Multipath route with mtu metric"
 
 	$IP ro add 172.16.104.0/24 via 172.16.101.2 mtu 1300
-	run_cmd "ip netns exec ns1 ping -w1 -c1 -s 1500 172.16.104.1"
+	run_cmd "ip netns exec $ns1 ping -w1 -c1 -s 1500 172.16.104.1"
 	log_test $? 0 "Using route with mtu metric"
 
 	run_cmd "$IP ro add 172.16.111.0/24 via 172.16.101.2 congctl lock foo"
@@ -2105,7 +2095,7 @@  ipv4_route_v6_gw_test()
 		check_route "172.16.104.0/24 via inet6 2001:db8:101::2 dev veth1"
 	fi
 
-	run_cmd "ip netns exec ns1 ping -w1 -c1 172.16.104.1"
+	run_cmd "ip netns exec $ns1 ping -w1 -c1 172.16.104.1"
 	log_test $rc 0 "Single path route with IPv6 gateway - ping"
 
 	run_cmd "$IP ro del 172.16.104.0/24 via inet6 2001:db8:101::2"
@@ -2196,7 +2186,7 @@  ipv4_mangle_test()
 	sleep 2
 
 	local tmp_file=$(mktemp)
-	ip netns exec ns2 socat UDP4-LISTEN:54321,fork $tmp_file &
+	ip netns exec $ns2 socat UDP4-LISTEN:54321,fork $tmp_file &
 
 	# Add a FIB rule and a route that will direct our connection to the
 	# listening server.
@@ -2254,7 +2244,7 @@  ipv6_mangle_test()
 	sleep 2
 
 	local tmp_file=$(mktemp)
-	ip netns exec ns2 socat UDP6-LISTEN:54321,fork $tmp_file &
+	ip netns exec $ns2 socat UDP6-LISTEN:54321,fork $tmp_file &
 
 	# Add a FIB rule and a route that will direct our connection to the
 	# listening server.
@@ -2423,37 +2413,37 @@  ipv4_mpath_list_test()
 	route_setup
 
 	set -e
-	run_cmd "ip netns exec ns1 ethtool -K veth1 tcp-segmentation-offload off"
-
-	run_cmd "ip netns exec ns2 bash -c \"echo 20000 > /sys/class/net/veth2/gro_flush_timeout\""
-	run_cmd "ip netns exec ns2 bash -c \"echo 1 > /sys/class/net/veth2/napi_defer_hard_irqs\""
-	run_cmd "ip netns exec ns2 ethtool -K veth2 generic-receive-offload on"
-	run_cmd "ip -n ns2 link add name nh1 up type dummy"
-	run_cmd "ip -n ns2 link add name nh2 up type dummy"
-	run_cmd "ip -n ns2 address add 172.16.201.1/24 dev nh1"
-	run_cmd "ip -n ns2 address add 172.16.202.1/24 dev nh2"
-	run_cmd "ip -n ns2 neigh add 172.16.201.2 lladdr 00:11:22:33:44:55 nud perm dev nh1"
-	run_cmd "ip -n ns2 neigh add 172.16.202.2 lladdr 00:aa:bb:cc:dd:ee nud perm dev nh2"
-	run_cmd "ip -n ns2 route add 203.0.113.0/24
+	run_cmd "ip netns exec $ns1 ethtool -K veth1 tcp-segmentation-offload off"
+
+	run_cmd "ip netns exec $ns2 bash -c \"echo 20000 > /sys/class/net/veth2/gro_flush_timeout\""
+	run_cmd "ip netns exec $ns2 bash -c \"echo 1 > /sys/class/net/veth2/napi_defer_hard_irqs\""
+	run_cmd "ip netns exec $ns2 ethtool -K veth2 generic-receive-offload on"
+	run_cmd "ip -n $ns2 link add name nh1 up type dummy"
+	run_cmd "ip -n $ns2 link add name nh2 up type dummy"
+	run_cmd "ip -n $ns2 address add 172.16.201.1/24 dev nh1"
+	run_cmd "ip -n $ns2 address add 172.16.202.1/24 dev nh2"
+	run_cmd "ip -n $ns2 neigh add 172.16.201.2 lladdr 00:11:22:33:44:55 nud perm dev nh1"
+	run_cmd "ip -n $ns2 neigh add 172.16.202.2 lladdr 00:aa:bb:cc:dd:ee nud perm dev nh2"
+	run_cmd "ip -n $ns2 route add 203.0.113.0/24
 		nexthop via 172.16.201.2 nexthop via 172.16.202.2"
-	run_cmd "ip netns exec ns2 sysctl -qw net.ipv4.fib_multipath_hash_policy=1"
-	run_cmd "ip netns exec ns2 sysctl -qw net.ipv4.conf.veth2.rp_filter=0"
-	run_cmd "ip netns exec ns2 sysctl -qw net.ipv4.conf.all.rp_filter=0"
-	run_cmd "ip netns exec ns2 sysctl -qw net.ipv4.conf.default.rp_filter=0"
+	run_cmd "ip netns exec $ns2 sysctl -qw net.ipv4.fib_multipath_hash_policy=1"
+	run_cmd "ip netns exec $ns2 sysctl -qw net.ipv4.conf.veth2.rp_filter=0"
+	run_cmd "ip netns exec $ns2 sysctl -qw net.ipv4.conf.all.rp_filter=0"
+	run_cmd "ip netns exec $ns2 sysctl -qw net.ipv4.conf.default.rp_filter=0"
 	set +e
 
-	local dmac=$(ip -n ns2 -j link show dev veth2 | jq -r '.[]["address"]')
+	local dmac=$(ip -n $ns2 -j link show dev veth2 | jq -r '.[]["address"]')
 	local tmp_file=$(mktemp)
-	local cmd="ip netns exec ns1 mausezahn veth1 -a own -b $dmac
+	local cmd="ip netns exec $ns1 mausezahn veth1 -a own -b $dmac
 		-A 172.16.101.1 -B 203.0.113.1 -t udp 'sp=12345,dp=0-65535' -q"
 
 	# Packets forwarded in a list using a multipath route must not reuse a
 	# cached result so that a flow always hits the same nexthop. In other
 	# words, the FIB lookup tracepoint needs to be triggered for every
 	# packet.
-	local t0_rx_pkts=$(link_stats_get ns2 veth2 rx packets)
+	local t0_rx_pkts=$(link_stats_get $ns2 veth2 rx packets)
 	run_cmd "perf stat -a -e fib:fib_table_lookup --filter 'err == 0' -j -o $tmp_file -- $cmd"
-	local t1_rx_pkts=$(link_stats_get ns2 veth2 rx packets)
+	local t1_rx_pkts=$(link_stats_get $ns2 veth2 rx packets)
 	local diff=$(echo $t1_rx_pkts - $t0_rx_pkts | bc -l)
 	list_rcv_eval $tmp_file $diff
 
@@ -2471,34 +2461,34 @@  ipv6_mpath_list_test()
 	route_setup
 
 	set -e
-	run_cmd "ip netns exec ns1 ethtool -K veth1 tcp-segmentation-offload off"
-
-	run_cmd "ip netns exec ns2 bash -c \"echo 20000 > /sys/class/net/veth2/gro_flush_timeout\""
-	run_cmd "ip netns exec ns2 bash -c \"echo 1 > /sys/class/net/veth2/napi_defer_hard_irqs\""
-	run_cmd "ip netns exec ns2 ethtool -K veth2 generic-receive-offload on"
-	run_cmd "ip -n ns2 link add name nh1 up type dummy"
-	run_cmd "ip -n ns2 link add name nh2 up type dummy"
-	run_cmd "ip -n ns2 -6 address add 2001:db8:201::1/64 dev nh1"
-	run_cmd "ip -n ns2 -6 address add 2001:db8:202::1/64 dev nh2"
-	run_cmd "ip -n ns2 -6 neigh add 2001:db8:201::2 lladdr 00:11:22:33:44:55 nud perm dev nh1"
-	run_cmd "ip -n ns2 -6 neigh add 2001:db8:202::2 lladdr 00:aa:bb:cc:dd:ee nud perm dev nh2"
-	run_cmd "ip -n ns2 -6 route add 2001:db8:301::/64
+	run_cmd "ip netns exec $ns1 ethtool -K veth1 tcp-segmentation-offload off"
+
+	run_cmd "ip netns exec $ns2 bash -c \"echo 20000 > /sys/class/net/veth2/gro_flush_timeout\""
+	run_cmd "ip netns exec $ns2 bash -c \"echo 1 > /sys/class/net/veth2/napi_defer_hard_irqs\""
+	run_cmd "ip netns exec $ns2 ethtool -K veth2 generic-receive-offload on"
+	run_cmd "ip -n $ns2 link add name nh1 up type dummy"
+	run_cmd "ip -n $ns2 link add name nh2 up type dummy"
+	run_cmd "ip -n $ns2 -6 address add 2001:db8:201::1/64 dev nh1"
+	run_cmd "ip -n $ns2 -6 address add 2001:db8:202::1/64 dev nh2"
+	run_cmd "ip -n $ns2 -6 neigh add 2001:db8:201::2 lladdr 00:11:22:33:44:55 nud perm dev nh1"
+	run_cmd "ip -n $ns2 -6 neigh add 2001:db8:202::2 lladdr 00:aa:bb:cc:dd:ee nud perm dev nh2"
+	run_cmd "ip -n $ns2 -6 route add 2001:db8:301::/64
 		nexthop via 2001:db8:201::2 nexthop via 2001:db8:202::2"
-	run_cmd "ip netns exec ns2 sysctl -qw net.ipv6.fib_multipath_hash_policy=1"
+	run_cmd "ip netns exec $ns2 sysctl -qw net.ipv6.fib_multipath_hash_policy=1"
 	set +e
 
-	local dmac=$(ip -n ns2 -j link show dev veth2 | jq -r '.[]["address"]')
+	local dmac=$(ip -n $ns2 -j link show dev veth2 | jq -r '.[]["address"]')
 	local tmp_file=$(mktemp)
-	local cmd="ip netns exec ns1 mausezahn -6 veth1 -a own -b $dmac
+	local cmd="ip netns exec $ns1 mausezahn -6 veth1 -a own -b $dmac
 		-A 2001:db8:101::1 -B 2001:db8:301::1 -t udp 'sp=12345,dp=0-65535' -q"
 
 	# Packets forwarded in a list using a multipath route must not reuse a
 	# cached result so that a flow always hits the same nexthop. In other
 	# words, the FIB lookup tracepoint needs to be triggered for every
 	# packet.
-	local t0_rx_pkts=$(link_stats_get ns2 veth2 rx packets)
+	local t0_rx_pkts=$(link_stats_get $ns2 veth2 rx packets)
 	run_cmd "perf stat -a -e fib6:fib6_table_lookup --filter 'err == 0' -j -o $tmp_file -- $cmd"
-	local t1_rx_pkts=$(link_stats_get ns2 veth2 rx packets)
+	local t1_rx_pkts=$(link_stats_get $ns2 veth2 rx packets)
 	local diff=$(echo $t1_rx_pkts - $t0_rx_pkts | bc -l)
 	list_rcv_eval $tmp_file $diff