@@ -4,6 +4,7 @@ TEST_BOTH_AF += connect
TEST_BOTH_AF += connect-deny
TEST_BOTH_AF += icmps-accept icmps-discard
TEST_BOTH_AF += restore
+TEST_BOTH_AF += seq-ext
TEST_BOTH_AF += setsockopt-closed
TEST_BOTH_AF += unsigned-md5
new file mode 100644
@@ -0,0 +1,245 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Check that after SEQ number wrap-around:
+ * 1. SEQ-extension has upper bytes set
+ * 2. TCP conneciton is alive and no TCPAOBad segments
+ * In order to test (2), the test doesn't just adjust seq number for a queue
+ * on a connected socket, but migrates it to another sk+port number, so
+ * that there won't be any delayed packets that will fail to verify
+ * with the new SEQ numbers.
+ */
+#include <inttypes.h>
+#include "aolib.h"
+
+const unsigned int nr_packets = 1000;
+const unsigned int msg_len = 1000;
+const unsigned int quota = nr_packets * msg_len;
+unsigned int client_new_port;
+
+/* Move them closer to roll-over */
+static void test_adjust_seqs(struct tcp_sock_state *img,
+ struct tcp_ao_repair *ao_img,
+ bool server)
+{
+ uint32_t new_seq1, new_seq2;
+
+ /* make them roll-over during quota, but on different segments */
+ if (server) {
+ new_seq1 = ((uint32_t)-1) - msg_len;
+ new_seq2 = ((uint32_t)-1) - (quota - 2 * msg_len);
+ } else {
+ new_seq1 = ((uint32_t)-1) - (quota - 2 * msg_len);
+ new_seq2 = ((uint32_t)-1) - msg_len;
+ }
+
+ img->in.seq = new_seq1;
+ img->trw.snd_wl1 = img->in.seq - msg_len;
+ img->out.seq = new_seq2;
+ img->trw.rcv_wup = img->in.seq;
+}
+
+static int test_sk_restore(struct tcp_sock_state *img,
+ struct tcp_ao_repair *ao_img, sockaddr_af *saddr,
+ const union tcp_addr daddr, unsigned int dport,
+ struct tcp_ao_counters *cnt)
+{
+ int sk;
+
+ sk = socket(test_family, SOCK_STREAM, IPPROTO_TCP);
+ if (sk < 0)
+ test_error("socket()");
+
+ test_enable_repair(sk);
+ test_sock_restore(sk, img, saddr, daddr, dport);
+ if (test_add_repaired_key(sk, DEFAULT_TEST_PASSWORD, 0, daddr, -1, 100, 100))
+ test_error("setsockopt(TCP_AO_ADD_KEY)");
+ test_ao_restore(sk, ao_img);
+
+ if (test_get_tcp_ao_counters(sk, cnt))
+ test_error("test_get_tcp_ao_counters()");
+
+ test_disable_repair(sk);
+ test_sock_state_free(img);
+ return sk;
+}
+
+static void *server_fn(void *arg)
+{
+ uint64_t before_good, after_good, after_bad;
+ struct tcp_ao_counters ao1, ao2;
+ struct tcp_sock_state img;
+ struct tcp_ao_repair ao_img;
+ sockaddr_af saddr;
+ ssize_t bytes;
+ int sk, lsk;
+
+ lsk = test_listen_socket(this_ip_addr, test_server_port, 1);
+
+ if (test_add_key(lsk, DEFAULT_TEST_PASSWORD, this_ip_dest, -1, 100, 100))
+ test_error("setsockopt(TCP_AO_ADD_KEY)");
+
+ synchronize_threads(); /* 1: MKT added => connect() */
+
+ if (test_wait_fd(lsk, TEST_TIMEOUT_SEC, 0))
+ test_error("test_wait_fd()");
+
+ sk = accept(lsk, NULL, NULL);
+ if (sk < 0)
+ test_error("accept()");
+
+ synchronize_threads(); /* 2: accepted => send data */
+ close(lsk);
+
+ bytes = test_server_run(sk, quota, TEST_TIMEOUT_SEC);
+ if (bytes != quota) {
+ if (bytes > 0)
+ test_fail("server served: %zd", bytes);
+ else
+ test_fail("server returned: %zd", bytes);
+ goto out;
+ }
+
+ before_good = netstat_get_one("TCPAOGood", NULL);
+
+ synchronize_threads(); /* 3: restore the connection on another port */
+
+ test_enable_repair(sk);
+ test_sock_checkpoint(sk, &img, &saddr);
+ test_ao_checkpoint(sk, &ao_img);
+ test_kill_sk(sk);
+#ifdef IPV6_TEST
+ saddr.sin6_port = htons(ntohs(saddr.sin6_port) + 1);
+#else
+ saddr.sin_port = htons(ntohs(saddr.sin_port) + 1);
+#endif
+ test_adjust_seqs(&img, &ao_img, true);
+ synchronize_threads(); /* 4: dump finished */
+ sk = test_sk_restore(&img, &ao_img, &saddr, this_ip_dest,
+ client_new_port, &ao1);
+
+ synchronize_threads(); /* 5: verify counters during SEQ-number rollover */
+ bytes = test_server_run(sk, quota, TEST_TIMEOUT_SEC);
+ if (bytes != quota) {
+ if (bytes > 0)
+ test_fail("server served: %zd", bytes);
+ else
+ test_fail("server returned: %zd", bytes);
+ } else {
+ test_ok("server alive");
+ }
+
+ if (test_get_tcp_ao_counters(sk, &ao2))
+ test_error("test_get_tcp_ao_counters()");
+ after_good = netstat_get_one("TCPAOGood", NULL);
+
+ test_tcp_ao_counters_cmp(NULL, &ao1, &ao2, TEST_CNT_GOOD);
+
+ if (after_good <= before_good) {
+ test_fail("TCPAOGood counter did not increase: %zu <= %zu",
+ after_good, before_good);
+ } else {
+ test_ok("TCPAOGood counter increased %zu => %zu",
+ before_good, after_good);
+ }
+ after_bad = netstat_get_one("TCPAOBad", NULL);
+ if (after_bad)
+ test_fail("TCPAOBad counter is non-zero: %zu", after_bad);
+ else
+ test_ok("TCPAOBad counter didn't increase");
+ test_enable_repair(sk);
+ test_ao_checkpoint(sk, &ao_img);
+ if (ao_img.snd_sne && ao_img.rcv_sne) {
+ test_ok("SEQ extension incremented: %u/%u",
+ ao_img.snd_sne, ao_img.rcv_sne);
+ } else {
+ test_fail("SEQ extension was not incremented: %u/%u",
+ ao_img.snd_sne, ao_img.rcv_sne);
+ }
+
+ synchronize_threads(); /* 6: verified => closed */
+out:
+ close(sk);
+ return NULL;
+}
+
+static void *client_fn(void *arg)
+{
+ uint64_t before_good, after_good, after_bad;
+ struct tcp_ao_counters ao1, ao2;
+ struct tcp_sock_state img;
+ struct tcp_ao_repair ao_img;
+ sockaddr_af saddr;
+ int sk;
+
+ sk = socket(test_family, SOCK_STREAM, IPPROTO_TCP);
+ if (sk < 0)
+ test_error("socket()");
+
+ if (test_add_key(sk, DEFAULT_TEST_PASSWORD, this_ip_dest, -1, 100, 100))
+ test_error("setsockopt(TCP_AO_ADD_KEY)");
+
+ synchronize_threads(); /* 1: MKT added => connect() */
+ if (test_connect_socket(sk, this_ip_dest, test_server_port) <= 0)
+ test_error("failed to connect()");
+
+ synchronize_threads(); /* 2: accepted => send data */
+ if (test_client_verify(sk, msg_len, nr_packets, TEST_TIMEOUT_SEC)) {
+ test_fail("pre-migrate verify failed");
+ return NULL;
+ }
+
+ before_good = netstat_get_one("TCPAOGood", NULL);
+
+ synchronize_threads(); /* 3: restore the connection on another port */
+ test_enable_repair(sk);
+ test_sock_checkpoint(sk, &img, &saddr);
+ test_ao_checkpoint(sk, &ao_img);
+ test_kill_sk(sk);
+#ifdef IPV6_TEST
+ client_new_port = ntohs(saddr.sin6_port) + 1;
+ saddr.sin6_port = htons(ntohs(saddr.sin6_port) + 1);
+#else
+ client_new_port = ntohs(saddr.sin_port) + 1;
+ saddr.sin_port = htons(ntohs(saddr.sin_port) + 1);
+#endif
+ test_adjust_seqs(&img, &ao_img, false);
+ synchronize_threads(); /* 4: dump finished */
+ sk = test_sk_restore(&img, &ao_img, &saddr, this_ip_dest,
+ test_server_port + 1, &ao1);
+
+ synchronize_threads(); /* 5: verify counters during SEQ-number rollover */
+ if (test_client_verify(sk, msg_len, nr_packets, TEST_TIMEOUT_SEC))
+ test_fail("post-migrate verify failed");
+ else
+ test_ok("post-migrate connection alive");
+
+ if (test_get_tcp_ao_counters(sk, &ao2))
+ test_error("test_get_tcp_ao_counters()");
+ after_good = netstat_get_one("TCPAOGood", NULL);
+
+ test_tcp_ao_counters_cmp(NULL, &ao1, &ao2, TEST_CNT_GOOD);
+
+ if (after_good <= before_good) {
+ test_fail("TCPAOGood counter did not increase: %zu <= %zu",
+ after_good, before_good);
+ } else {
+ test_ok("TCPAOGood counter increased %zu => %zu",
+ before_good, after_good);
+ }
+ after_bad = netstat_get_one("TCPAOBad", NULL);
+ if (after_bad)
+ test_fail("TCPAOBad counter is non-zero: %zu", after_bad);
+ else
+ test_ok("TCPAOBad counter didn't increase");
+
+ synchronize_threads(); /* 6: verified => closed */
+ close(sk);
+
+ synchronize_threads(); /* don't race to exit: let server exit() */
+ return NULL;
+}
+
+int main(int argc, char *argv[])
+{
+ test_init(7, server_fn, client_fn);
+ return 0;
+}