| Message ID | 20240613181333.984810-5-aconole@redhat.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | selftests: net: Switch pmtu.sh to use the internal ovs script. | expand |
On Thu, Jun 13, 2024 at 02:13:30PM -0400, Aaron Conole wrote: > This will be used when setting details about the tunnel to use as > transport. There is a difference between the ODP format between tunnel(): > the 'key' flag is not actually a flag field, so we don't support it in the > same way that the vswitchd userspace supports displaying it. > > Signed-off-by: Aaron Conole <aconole@redhat.com> ... > @@ -1265,6 +1265,165 @@ class ovskey(nla): > init=init, > ) > > + class ovs_key_tunnel(nla): > + nla_flags = NLA_F_NESTED > + > + nla_map = ( > + ("OVS_TUNNEL_KEY_ATTR_ID", "be64"), > + ("OVS_TUNNEL_KEY_ATTR_IPV4_SRC", "ipaddr"), > + ("OVS_TUNNEL_KEY_ATTR_IPV4_DST", "ipaddr"), > + ("OVS_TUNNEL_KEY_ATTR_TOS", "uint8"), > + ("OVS_TUNNEL_KEY_ATTR_TTL", "uint8"), > + ("OVS_TUNNEL_KEY_ATTR_DONT_FRAGMENT", "flag"), > + ("OVS_TUNNEL_KEY_ATTR_CSUM", "flag"), > + ("OVS_TUNNEL_KEY_ATTR_OAM", "flag"), > + ("OVS_TUNNEL_KEY_ATTR_GENEVE_OPTS", "array(uint32)"), > + ("OVS_TUNNEL_KEY_ATTR_TP_SRC", "be16"), > + ("OVS_TUNNEL_KEY_ATTR_TP_DST", "be16"), > + ("OVS_TUNNEL_KEY_ATTR_VXLAN_OPTS", "none"), > + ("OVS_TUNNEL_KEY_ATTR_IPV6_SRC", "ipaddr"), > + ("OVS_TUNNEL_KEY_ATTR_IPV6_DST", "ipaddr"), > + ("OVS_TUNNEL_KEY_ATTR_PAD", "none"), > + ("OVS_TUNNEL_KEY_ATTR_ERSPAN_OPTS", "none"), > + ("OVS_TUNNEL_KEY_ATTR_IPV4_INFO_BRIDGE", "flag"), > + ) > + > + def parse(self, flowstr, mask=None): > + if not flowstr.startswith("tunnel("): > + return None, None > + > + k = ovskey.ovs_key_tunnel() > + if mask is not None: > + mask = ovskey.ovs_key_tunnel() > + > + flowstr = flowstr[len("tunnel("):] > + > + v6_address = None > + > + fields = [ > + ("tun_id=", r"(\d+)", int, "OVS_TUNNEL_KEY_ATTR_ID", > + 0xffffffffffffffff, None, None), > + > + ("src=", r"([0-9a-fA-F\.]+)", str, > + "OVS_TUNNEL_KEY_ATTR_IPV4_SRC", "255.255.255.255", "0.0.0.0", > + False), > + ("dst=", r"([0-9a-fA-F\.]+)", str, > + "OVS_TUNNEL_KEY_ATTR_IPV4_DST", "255.255.255.255", "0.0.0.0", > + False), > + > + ("ipv6_src=", r"([0-9a-fA-F:]+)", str, > + "OVS_TUNNEL_KEY_ATTR_IPV6_SRC", > + "ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff", "::", True), > + ("ipv6_dst=", r"([0-9a-fA-F:]+)", str, > + "OVS_TUNNEL_KEY_ATTR_IPV6_DST", > + "ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff", "::", True), > + > + ("tos=", r"(\d+)", int, "OVS_TUNNEL_KEY_ATTR_TOS", 255, 0, > + None), > + ("ttl=", r"(\d+)", int, "OVS_TUNNEL_KEY_ATTR_TTL", 255, 0, > + None), > + > + ("tp_src=", r"(\d+)", int, "OVS_TUNNEL_KEY_ATTR_TP_SRC", > + 65535, 0, None), > + ("tp_dst=", r"(\d+)", int, "OVS_TUNNEL_KEY_ATTR_TP_DST", > + 65535, 0, None), > + ] > + > + forced_include = ["OVS_TUNNEL_KEY_ATTR_TTL"] > + > + for prefix, regex, typ, attr_name, mask_val, default_val, v46_flag in fields: > + flowstr, value = parse_extract_field(flowstr, prefix, regex, typ, False) > + if not attr_name: > + raise Exception("Bad list value in tunnel fields") > + > + if value is None and attr_name in forced_include: > + value = default_val > + mask_val = default_val > + > + if value is not None: > + if v6_address is None and v46_flag is not None: > + v6_address = v46_flag By my reading, at this point v6_address will only be None if v46_flag is not None. IF so, the condition below seems excessive. > + if v6_address is not None and v46_flag is not None \ > + and v46_flag != v6_address: > + raise ValueError("Cannot mix v6 and v4 addresses") I wonder if we can instead express this as (completely untested!): if v46_flag is not None: if v6_address is None: v6_address = v46_flag if v46_flag != v6_address: raise ValueError("Cannot mix v6 and v4 addresses") > + k["attrs"].append([attr_name, value]) > + if mask is not None: > + mask["attrs"].append([attr_name, mask_val]) > + else: > + if v6_address is not None and v46_flag is not None \ > + and v46_flag != v6_address: > + continue > + if v6_address is None and v46_flag is not None: > + continue And I wonder if this is a bit easier on the eyes (also completely untested): if v46_flag is not None: if v6_address is None or v46_flag != v6_address: continue > + if mask is not None: > + mask["attrs"].append([attr_name, default_val]) > + > + if k["attrs"][0][0] != "OVS_TUNNEL_KEY_ATTR_ID": > + raise ValueError("Needs a tunid set") ... > @@ -1745,7 +1905,7 @@ class OvsVport(GenericNetlinkSocket): > ) > > TUNNEL_DEFAULTS = [("geneve", 6081), > - ("vxlan", 4798)] > + ("vxlan", 4789)] > > for tnl in TUNNEL_DEFAULTS: > if ptype == tnl[0]: As noted in my response to PATCH 1/7, I think that the change in the hunk above belongs there rather than here.
Simon Horman <horms@kernel.org> writes: > On Thu, Jun 13, 2024 at 02:13:30PM -0400, Aaron Conole wrote: >> This will be used when setting details about the tunnel to use as >> transport. There is a difference between the ODP format between tunnel(): >> the 'key' flag is not actually a flag field, so we don't support it in the >> same way that the vswitchd userspace supports displaying it. >> >> Signed-off-by: Aaron Conole <aconole@redhat.com> > > ... > >> @@ -1265,6 +1265,165 @@ class ovskey(nla): >> init=init, >> ) >> >> + class ovs_key_tunnel(nla): >> + nla_flags = NLA_F_NESTED >> + >> + nla_map = ( >> + ("OVS_TUNNEL_KEY_ATTR_ID", "be64"), >> + ("OVS_TUNNEL_KEY_ATTR_IPV4_SRC", "ipaddr"), >> + ("OVS_TUNNEL_KEY_ATTR_IPV4_DST", "ipaddr"), >> + ("OVS_TUNNEL_KEY_ATTR_TOS", "uint8"), >> + ("OVS_TUNNEL_KEY_ATTR_TTL", "uint8"), >> + ("OVS_TUNNEL_KEY_ATTR_DONT_FRAGMENT", "flag"), >> + ("OVS_TUNNEL_KEY_ATTR_CSUM", "flag"), >> + ("OVS_TUNNEL_KEY_ATTR_OAM", "flag"), >> + ("OVS_TUNNEL_KEY_ATTR_GENEVE_OPTS", "array(uint32)"), >> + ("OVS_TUNNEL_KEY_ATTR_TP_SRC", "be16"), >> + ("OVS_TUNNEL_KEY_ATTR_TP_DST", "be16"), >> + ("OVS_TUNNEL_KEY_ATTR_VXLAN_OPTS", "none"), >> + ("OVS_TUNNEL_KEY_ATTR_IPV6_SRC", "ipaddr"), >> + ("OVS_TUNNEL_KEY_ATTR_IPV6_DST", "ipaddr"), >> + ("OVS_TUNNEL_KEY_ATTR_PAD", "none"), >> + ("OVS_TUNNEL_KEY_ATTR_ERSPAN_OPTS", "none"), >> + ("OVS_TUNNEL_KEY_ATTR_IPV4_INFO_BRIDGE", "flag"), >> + ) >> + >> + def parse(self, flowstr, mask=None): >> + if not flowstr.startswith("tunnel("): >> + return None, None >> + >> + k = ovskey.ovs_key_tunnel() >> + if mask is not None: >> + mask = ovskey.ovs_key_tunnel() >> + >> + flowstr = flowstr[len("tunnel("):] >> + >> + v6_address = None >> + >> + fields = [ >> + ("tun_id=", r"(\d+)", int, "OVS_TUNNEL_KEY_ATTR_ID", >> + 0xffffffffffffffff, None, None), >> + >> + ("src=", r"([0-9a-fA-F\.]+)", str, >> + "OVS_TUNNEL_KEY_ATTR_IPV4_SRC", "255.255.255.255", "0.0.0.0", >> + False), >> + ("dst=", r"([0-9a-fA-F\.]+)", str, >> + "OVS_TUNNEL_KEY_ATTR_IPV4_DST", "255.255.255.255", "0.0.0.0", >> + False), >> + >> + ("ipv6_src=", r"([0-9a-fA-F:]+)", str, >> + "OVS_TUNNEL_KEY_ATTR_IPV6_SRC", >> + "ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff", "::", True), >> + ("ipv6_dst=", r"([0-9a-fA-F:]+)", str, >> + "OVS_TUNNEL_KEY_ATTR_IPV6_DST", >> + "ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff", "::", True), >> + >> + ("tos=", r"(\d+)", int, "OVS_TUNNEL_KEY_ATTR_TOS", 255, 0, >> + None), >> + ("ttl=", r"(\d+)", int, "OVS_TUNNEL_KEY_ATTR_TTL", 255, 0, >> + None), >> + >> + ("tp_src=", r"(\d+)", int, "OVS_TUNNEL_KEY_ATTR_TP_SRC", >> + 65535, 0, None), >> + ("tp_dst=", r"(\d+)", int, "OVS_TUNNEL_KEY_ATTR_TP_DST", >> + 65535, 0, None), >> + ] >> + >> + forced_include = ["OVS_TUNNEL_KEY_ATTR_TTL"] >> + >> + for prefix, regex, typ, attr_name, mask_val, default_val, v46_flag in fields: >> + flowstr, value = parse_extract_field(flowstr, prefix, regex, typ, False) >> + if not attr_name: >> + raise Exception("Bad list value in tunnel fields") >> + >> + if value is None and attr_name in forced_include: >> + value = default_val >> + mask_val = default_val >> + >> + if value is not None: >> + if v6_address is None and v46_flag is not None: >> + v6_address = v46_flag > > By my reading, at this point v6_address will only be None if v46_flag is > not None. IF so, the condition below seems excessive. Agreed - thanks for the suggestions. >> + if v6_address is not None and v46_flag is not None \ >> + and v46_flag != v6_address: >> + raise ValueError("Cannot mix v6 and v4 addresses") > > I wonder if we can instead express this as (completely untested!): > > if v46_flag is not None: > if v6_address is None: > v6_address = v46_flag > if v46_flag != v6_address: > raise ValueError("Cannot mix v6 and v4 addresses") > >> + k["attrs"].append([attr_name, value]) >> + if mask is not None: >> + mask["attrs"].append([attr_name, mask_val]) >> + else: >> + if v6_address is not None and v46_flag is not None \ >> + and v46_flag != v6_address: >> + continue >> + if v6_address is None and v46_flag is not None: >> + continue > > And I wonder if this is a bit easier on the eyes (also completely untested): > > if v46_flag is not None: > if v6_address is None or v46_flag != v6_address: > continue I folded both of these in and did some quick testing. Thanks Simon! >> + if mask is not None: >> + mask["attrs"].append([attr_name, default_val]) >> + >> + if k["attrs"][0][0] != "OVS_TUNNEL_KEY_ATTR_ID": >> + raise ValueError("Needs a tunid set") > > ... > >> @@ -1745,7 +1905,7 @@ class OvsVport(GenericNetlinkSocket): >> ) >> >> TUNNEL_DEFAULTS = [("geneve", 6081), >> - ("vxlan", 4798)] >> + ("vxlan", 4789)] >> >> for tnl in TUNNEL_DEFAULTS: >> if ptype == tnl[0]: > > As noted in my response to PATCH 1/7, I think that the > change in the hunk above belongs there rather than here.
diff --git a/tools/testing/selftests/net/openvswitch/ovs-dpctl.py b/tools/testing/selftests/net/openvswitch/ovs-dpctl.py index fee64c31d4d4..5545e5cab1d6 100644 --- a/tools/testing/selftests/net/openvswitch/ovs-dpctl.py +++ b/tools/testing/selftests/net/openvswitch/ovs-dpctl.py @@ -705,7 +705,7 @@ class ovskey(nla): ("OVS_KEY_ATTR_ARP", "ovs_key_arp"), ("OVS_KEY_ATTR_ND", "ovs_key_nd"), ("OVS_KEY_ATTR_SKB_MARK", "uint32"), - ("OVS_KEY_ATTR_TUNNEL", "none"), + ("OVS_KEY_ATTR_TUNNEL", "ovs_key_tunnel"), ("OVS_KEY_ATTR_SCTP", "ovs_key_sctp"), ("OVS_KEY_ATTR_TCP_FLAGS", "be16"), ("OVS_KEY_ATTR_DP_HASH", "uint32"), @@ -1265,6 +1265,165 @@ class ovskey(nla): init=init, ) + class ovs_key_tunnel(nla): + nla_flags = NLA_F_NESTED + + nla_map = ( + ("OVS_TUNNEL_KEY_ATTR_ID", "be64"), + ("OVS_TUNNEL_KEY_ATTR_IPV4_SRC", "ipaddr"), + ("OVS_TUNNEL_KEY_ATTR_IPV4_DST", "ipaddr"), + ("OVS_TUNNEL_KEY_ATTR_TOS", "uint8"), + ("OVS_TUNNEL_KEY_ATTR_TTL", "uint8"), + ("OVS_TUNNEL_KEY_ATTR_DONT_FRAGMENT", "flag"), + ("OVS_TUNNEL_KEY_ATTR_CSUM", "flag"), + ("OVS_TUNNEL_KEY_ATTR_OAM", "flag"), + ("OVS_TUNNEL_KEY_ATTR_GENEVE_OPTS", "array(uint32)"), + ("OVS_TUNNEL_KEY_ATTR_TP_SRC", "be16"), + ("OVS_TUNNEL_KEY_ATTR_TP_DST", "be16"), + ("OVS_TUNNEL_KEY_ATTR_VXLAN_OPTS", "none"), + ("OVS_TUNNEL_KEY_ATTR_IPV6_SRC", "ipaddr"), + ("OVS_TUNNEL_KEY_ATTR_IPV6_DST", "ipaddr"), + ("OVS_TUNNEL_KEY_ATTR_PAD", "none"), + ("OVS_TUNNEL_KEY_ATTR_ERSPAN_OPTS", "none"), + ("OVS_TUNNEL_KEY_ATTR_IPV4_INFO_BRIDGE", "flag"), + ) + + def parse(self, flowstr, mask=None): + if not flowstr.startswith("tunnel("): + return None, None + + k = ovskey.ovs_key_tunnel() + if mask is not None: + mask = ovskey.ovs_key_tunnel() + + flowstr = flowstr[len("tunnel("):] + + v6_address = None + + fields = [ + ("tun_id=", r"(\d+)", int, "OVS_TUNNEL_KEY_ATTR_ID", + 0xffffffffffffffff, None, None), + + ("src=", r"([0-9a-fA-F\.]+)", str, + "OVS_TUNNEL_KEY_ATTR_IPV4_SRC", "255.255.255.255", "0.0.0.0", + False), + ("dst=", r"([0-9a-fA-F\.]+)", str, + "OVS_TUNNEL_KEY_ATTR_IPV4_DST", "255.255.255.255", "0.0.0.0", + False), + + ("ipv6_src=", r"([0-9a-fA-F:]+)", str, + "OVS_TUNNEL_KEY_ATTR_IPV6_SRC", + "ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff", "::", True), + ("ipv6_dst=", r"([0-9a-fA-F:]+)", str, + "OVS_TUNNEL_KEY_ATTR_IPV6_DST", + "ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff", "::", True), + + ("tos=", r"(\d+)", int, "OVS_TUNNEL_KEY_ATTR_TOS", 255, 0, + None), + ("ttl=", r"(\d+)", int, "OVS_TUNNEL_KEY_ATTR_TTL", 255, 0, + None), + + ("tp_src=", r"(\d+)", int, "OVS_TUNNEL_KEY_ATTR_TP_SRC", + 65535, 0, None), + ("tp_dst=", r"(\d+)", int, "OVS_TUNNEL_KEY_ATTR_TP_DST", + 65535, 0, None), + ] + + forced_include = ["OVS_TUNNEL_KEY_ATTR_TTL"] + + for prefix, regex, typ, attr_name, mask_val, default_val, v46_flag in fields: + flowstr, value = parse_extract_field(flowstr, prefix, regex, typ, False) + if not attr_name: + raise Exception("Bad list value in tunnel fields") + + if value is None and attr_name in forced_include: + value = default_val + mask_val = default_val + + if value is not None: + if v6_address is None and v46_flag is not None: + v6_address = v46_flag + if v6_address is not None and v46_flag is not None \ + and v46_flag != v6_address: + raise ValueError("Cannot mix v6 and v4 addresses") + k["attrs"].append([attr_name, value]) + if mask is not None: + mask["attrs"].append([attr_name, mask_val]) + else: + if v6_address is not None and v46_flag is not None \ + and v46_flag != v6_address: + continue + if v6_address is None and v46_flag is not None: + continue + if mask is not None: + mask["attrs"].append([attr_name, default_val]) + + if k["attrs"][0][0] != "OVS_TUNNEL_KEY_ATTR_ID": + raise ValueError("Needs a tunid set") + + if flowstr.startswith("flags("): + flowstr = flowstr[len("flags("):] + flagspos = flowstr.find(")") + flags = flowstr[:flagspos] + flowstr = flowstr[flagspos + 1:] + + flag_attrs = { + "df": "OVS_TUNNEL_KEY_ATTR_DONT_FRAGMENT", + "csum": "OVS_TUNNEL_KEY_ATTR_CSUM", + "oam": "OVS_TUNNEL_KEY_ATTR_OAM" + } + + for flag in flags.split("|"): + if flag in flag_attrs: + k["attrs"].append([flag_attrs[flag], True]) + if mask is not None: + mask["attrs"].append([flag_attrs[flag], True]) + + flowstr = flowstr[strspn(flowstr, ", ") :] + return flowstr, k, mask + + def dpstr(self, mask=None, more=False): + printstr = "tunnel(" + + flagsattrs = [] + for k in self["attrs"]: + noprint = False + if k[0] == "OVS_TUNNEL_KEY_ATTR_ID": + print_str += "tun_id=%d" % k[1] + elif k[0] == "OVS_TUNNEL_KEY_ATTR_IPV4_SRC": + print_str += "src=%s" % k[1] + elif k[0] == "OVS_TUNNEL_KEY_ATTR_IPV4_DST": + print_str += "dst=%s" % k[1] + elif k[0] == "OVS_TUNNEL_KEY_ATTR_IPV6_SRC": + print_str += "ipv6_src=%s" % k[1] + elif k[0] == "OVS_TUNNEL_KEY_ATTR_IPV6_DST": + print_str += "ipv6_dst=%s" % k[1] + elif k[0] == "OVS_TUNNEL_KEY_ATTR_TOS": + print_str += "tos=%d" % k[1] + elif k[0] == "OVS_TUNNEL_KEY_ATTR_TTL": + print_str += "ttl=%d" % k[1] + elif k[0] == "OVS_TUNNEL_KEY_ATTR_TP_SRC": + print_str += "tp_src=%d" % k[1] + elif k[0] == "OVS_TUNNEL_KEY_ATTR_TP_DST": + print_str += "tp_dst=%d" % k[1] + elif k[0] == "OVS_TUNNEL_KEY_ATTR_DONT_FRAGMENT": + noprint = True + flagsattrs.append("df") + elif k[0] == "OVS_TUNNEL_KEY_ATTR_CSUM": + noprint = True + flagsattrs.append("csum") + elif k[0] == "OVS_TUNNEL_KEY_ATTR_OAM": + noprint = True + flagsattrs.append("oam") + + if not noprint: + print_str += "," + + if len(flagsattrs): + printstr += "flags(" + "|".join(flagsattrs) + ")" + printstr += ")" + return printstr + class ovs_key_mpls(nla): fields = (("lse", ">I"),) @@ -1273,6 +1432,7 @@ class ovskey(nla): ("OVS_KEY_ATTR_PRIORITY", "skb_priority", intparse), ("OVS_KEY_ATTR_SKB_MARK", "skb_mark", intparse), ("OVS_KEY_ATTR_RECIRC_ID", "recirc_id", intparse), + ("OVS_KEY_ATTR_TUNNEL", "tunnel", ovskey.ovs_key_tunnel), ("OVS_KEY_ATTR_DP_HASH", "dp_hash", intparse), ("OVS_KEY_ATTR_CT_STATE", "ct_state", parse_ct_state), ("OVS_KEY_ATTR_CT_ZONE", "ct_zone", intparse), @@ -1745,7 +1905,7 @@ class OvsVport(GenericNetlinkSocket): ) TUNNEL_DEFAULTS = [("geneve", 6081), - ("vxlan", 4798)] + ("vxlan", 4789)] for tnl in TUNNEL_DEFAULTS: if ptype == tnl[0]:
This will be used when setting details about the tunnel to use as transport. There is a difference between the ODP format between tunnel(): the 'key' flag is not actually a flag field, so we don't support it in the same way that the vswitchd userspace supports displaying it. Signed-off-by: Aaron Conole <aconole@redhat.com> --- .../selftests/net/openvswitch/ovs-dpctl.py | 164 +++++++++++++++++- 1 file changed, 162 insertions(+), 2 deletions(-)