@@ -23,9 +23,9 @@
#include <stdbool.h>
#include <errno.h>
#include <sys/vm86.h>
+#include "../kselftest.h"
static unsigned long load_addr = 0x10000;
-static int nerrs = 0;
static void sethandler(int sig, void (*handler)(int, siginfo_t *, void *),
int flags)
@@ -36,7 +36,7 @@ static void sethandler(int sig, void (*handler)(int, siginfo_t *, void *),
sa.sa_flags = SA_SIGINFO | flags;
sigemptyset(&sa.sa_mask);
if (sigaction(sig, &sa, 0))
- err(1, "sigaction");
+ ksft_exit_fail_perror("sigaction");
}
static void clearhandler(int sig)
@@ -46,7 +46,7 @@ static void clearhandler(int sig)
sa.sa_handler = SIG_DFL;
sigemptyset(&sa.sa_mask);
if (sigaction(sig, &sa, 0))
- err(1, "sigaction");
+ ksft_exit_fail_perror("sigaction");
}
static sig_atomic_t got_signal;
@@ -56,10 +56,8 @@ static void sighandler(int sig, siginfo_t *info, void *ctx_void)
ucontext_t *ctx = (ucontext_t*)ctx_void;
if (ctx->uc_mcontext.gregs[REG_EFL] & X86_EFLAGS_VM ||
- (ctx->uc_mcontext.gregs[REG_CS] & 3) != 3) {
- printf("[FAIL]\tSignal frame should not reflect vm86 mode\n");
- nerrs++;
- }
+ (ctx->uc_mcontext.gregs[REG_CS] & 3) != 3)
+ ksft_test_result_fail("Signal frame should not reflect vm86 mode\n");
const char *signame;
if (sig == SIGSEGV)
@@ -69,9 +67,9 @@ static void sighandler(int sig, siginfo_t *info, void *ctx_void)
else
signame = "unexpected signal";
- printf("[INFO]\t%s: FLAGS = 0x%lx, CS = 0x%hx\n", signame,
- (unsigned long)ctx->uc_mcontext.gregs[REG_EFL],
- (unsigned short)ctx->uc_mcontext.gregs[REG_CS]);
+ ksft_test_result_pass("%s: FLAGS = 0x%lx, CS = 0x%hx\n", signame,
+ (unsigned long)ctx->uc_mcontext.gregs[REG_EFL],
+ (unsigned short)ctx->uc_mcontext.gregs[REG_CS]);
got_signal = 1;
}
@@ -137,13 +135,13 @@ static bool do_test(struct vm86plus_struct *v86, unsigned long eip,
{
long ret;
- printf("[RUN]\t%s from vm86 mode\n", text);
+ ksft_print_msg("%s from vm86 mode\n", text);
v86->regs.eip = eip;
ret = vm86(VM86_ENTER, v86);
if (ret == -1 && (errno == ENOSYS || errno == EPERM)) {
- printf("[SKIP]\tvm86 %s\n",
- errno == ENOSYS ? "not supported" : "not allowed");
+ ksft_test_result_skip("vm86 %s\n",
+ errno == ENOSYS ? "not supported" : "not allowed");
return false;
}
@@ -159,29 +157,27 @@ static bool do_test(struct vm86plus_struct *v86, unsigned long eip,
else
sprintf(trapname, "%d", trapno);
- printf("[INFO]\tExited vm86 mode due to #%s\n", trapname);
+ ksft_print_msg("Exited vm86 mode due to #%s\n", trapname);
} else if (VM86_TYPE(ret) == VM86_UNKNOWN) {
- printf("[INFO]\tExited vm86 mode due to unhandled GP fault\n");
+ ksft_print_msg("Exited vm86 mode due to unhandled GP fault\n");
} else if (VM86_TYPE(ret) == VM86_TRAP) {
- printf("[INFO]\tExited vm86 mode due to a trap (arg=%ld)\n",
- VM86_ARG(ret));
+ ksft_print_msg("Exited vm86 mode due to a trap (arg=%ld)\n",
+ VM86_ARG(ret));
} else if (VM86_TYPE(ret) == VM86_SIGNAL) {
- printf("[INFO]\tExited vm86 mode due to a signal\n");
+ ksft_print_msg("Exited vm86 mode due to a signal\n");
} else if (VM86_TYPE(ret) == VM86_STI) {
- printf("[INFO]\tExited vm86 mode due to STI\n");
+ ksft_print_msg("Exited vm86 mode due to STI\n");
} else {
- printf("[INFO]\tExited vm86 mode due to type %ld, arg %ld\n",
- VM86_TYPE(ret), VM86_ARG(ret));
+ ksft_print_msg("Exited vm86 mode due to type %ld, arg %ld\n",
+ VM86_TYPE(ret), VM86_ARG(ret));
}
if (rettype == -1 ||
- (VM86_TYPE(ret) == rettype && VM86_ARG(ret) == retarg)) {
- printf("[OK]\tReturned correctly\n");
- } else {
- printf("[FAIL]\tIncorrect return reason (started at eip = 0x%lx, ended at eip = 0x%lx)\n", eip, v86->regs.eip);
- nerrs++;
- }
-
+ (VM86_TYPE(ret) == rettype && VM86_ARG(ret) == retarg))
+ ksft_test_result_pass("Returned correctly\n");
+ else
+ ksft_test_result_fail("Incorrect return reason (started at eip = 0x%lx, ended at eip = 0x%lx)\n",
+ eip, v86->regs.eip);
return true;
}
@@ -215,26 +211,20 @@ void do_umip_tests(struct vm86plus_struct *vm86, unsigned char *test_mem)
/* Results when using register operands */
msw3 = *(unsigned short *)(test_mem + 2080);
- printf("[INFO]\tResult from SMSW:[0x%04x]\n", msw1);
- printf("[INFO]\tResult from SIDT: limit[0x%04x]base[0x%08lx]\n",
- idt1.limit, idt1.base);
- printf("[INFO]\tResult from SGDT: limit[0x%04x]base[0x%08lx]\n",
- gdt1.limit, gdt1.base);
+ ksft_print_msg("Result from SMSW:[0x%04x]\n", msw1);
+ ksft_print_msg("Result from SIDT: limit[0x%04x]base[0x%08lx]\n",
+ idt1.limit, idt1.base);
+ ksft_print_msg("Result from SGDT: limit[0x%04x]base[0x%08lx]\n",
+ gdt1.limit, gdt1.base);
- if (msw1 != msw2 || msw1 != msw3)
- printf("[FAIL]\tAll the results of SMSW should be the same.\n");
- else
- printf("[PASS]\tAll the results from SMSW are identical.\n");
+ ksft_test_result((msw1 == msw2 && msw1 == msw3),
+ "All the results from SMSW are identical.\n");
- if (memcmp(&gdt1, &gdt2, sizeof(gdt1)))
- printf("[FAIL]\tAll the results of SGDT should be the same.\n");
- else
- printf("[PASS]\tAll the results from SGDT are identical.\n");
+ ksft_test_result(!memcmp(&gdt1, &gdt2, sizeof(gdt1)),
+ "All the results from SGDT are identical.\n");
- if (memcmp(&idt1, &idt2, sizeof(idt1)))
- printf("[FAIL]\tAll the results of SIDT should be the same.\n");
- else
- printf("[PASS]\tAll the results from SIDT are identical.\n");
+ ksft_test_result(!memcmp(&idt1, &idt2, sizeof(idt1)),
+ "All the results from SIDT are identical.\n");
sethandler(SIGILL, sighandler, 0);
do_test(vm86, vmcode_umip_str - vmcode, VM86_SIGNAL, 0,
@@ -250,11 +240,15 @@ void do_umip_tests(struct vm86plus_struct *vm86, unsigned char *test_mem)
int main(void)
{
struct vm86plus_struct v86;
- unsigned char *addr = mmap((void *)load_addr, 4096,
- PROT_READ | PROT_WRITE | PROT_EXEC,
- MAP_ANONYMOUS | MAP_PRIVATE, -1,0);
+ unsigned char *addr;
+
+ ksft_print_header();
+ ksft_set_plan(18);
+
+ addr = mmap((void *)load_addr, 4096, PROT_READ | PROT_WRITE | PROT_EXEC,
+ MAP_ANONYMOUS | MAP_PRIVATE, -1, 0);
if (addr != (unsigned char *)load_addr)
- err(1, "mmap");
+ ksft_exit_fail_perror("mmap");
memcpy(addr, vmcode, end_vmcode - vmcode);
addr[2048] = 2;
@@ -270,7 +264,8 @@ int main(void)
/* Use the end of the page as our stack. */
v86.regs.esp = 4096;
- assert((v86.regs.cs & 3) == 0); /* Looks like RPL = 0 */
+ if (v86.regs.cs & 3)
+ ksft_exit_fail_msg("Looks like RPL = 0\n");
/* #BR -- should deliver SIG??? */
do_test(&v86, vmcode_bound - vmcode, VM86_INTx, 5, "#BR");
@@ -333,16 +328,18 @@ int main(void)
v86.regs.ss = 0;
sethandler(SIGSEGV, sighandler, 0);
got_signal = 0;
- if (do_test(&v86, 0, VM86_SIGNAL, 0, "Execute null pointer") &&
- !got_signal) {
- printf("[FAIL]\tDid not receive SIGSEGV\n");
- nerrs++;
- }
+ if (do_test(&v86, 0, VM86_SIGNAL, 0, "Execute null pointer"))
+ ksft_test_result(got_signal, "Received SIGSEGV\n");
+ else
+ ksft_test_result_skip("Received SIGSEGV\n");
+
clearhandler(SIGSEGV);
/* Make sure nothing explodes if we fork. */
if (fork() == 0)
return 0;
- return (nerrs == 0 ? 0 : 1);
+ ksft_test_result_pass("fork succeeded\n");
+
+ ksft_finished();
}
- Remove manual pass/fail tests counting - Increase readability - Print details about errno if error occurs - Print logs in standard format Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com> --- tools/testing/selftests/x86/entry_from_vm86.c | 109 +++++++++--------- 1 file changed, 53 insertions(+), 56 deletions(-)