| Message ID | 20241104181430.228682-13-sdf@fomichev.me (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | selftests: ncdevmem: Add ncdevmem to ksft | expand |
On Mon, Nov 04, 2024 at 10:14:30AM -0800, Stanislav Fomichev wrote: > Only RX side for now and small message to test the setup. > In the future, we can extend it to TX side and to testing > both sides with a couple of megs of data. > > make \ > -C tools/testing/selftests \ > TARGETS="drivers/hw/net" \ > install INSTALL_PATH=~/tmp/ksft > > scp ~/tmp/ksft ${HOST}: > scp ~/tmp/ksft ${PEER}: > > cfg+="NETIF=${DEV}\n" > cfg+="LOCAL_V6=${HOST_IP}\n" > cfg+="REMOTE_V6=${PEER_IP}\n" > cfg+="REMOTE_TYPE=ssh\n" > cfg+="REMOTE_ARGS=root@${PEER}\n" > > echo -e "$cfg" | ssh root@${HOST} "cat > ksft/drivers/net/net.config" > ssh root@${HOST} "cd ksft && ./run_kselftest.sh -t drivers/net:devmem.py" > > Reviewed-by: Mina Almasry <almasrymina@google.com> > Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> > --- > .../testing/selftests/drivers/net/hw/Makefile | 1 + > .../selftests/drivers/net/hw/devmem.py | 45 +++++++++++++++++++ > 2 files changed, 46 insertions(+) > create mode 100755 tools/testing/selftests/drivers/net/hw/devmem.py > > diff --git a/tools/testing/selftests/drivers/net/hw/Makefile b/tools/testing/selftests/drivers/net/hw/Makefile > index 182348f4bd40..1c6a77480923 100644 > --- a/tools/testing/selftests/drivers/net/hw/Makefile > +++ b/tools/testing/selftests/drivers/net/hw/Makefile > @@ -3,6 +3,7 @@ > TEST_PROGS = \ > csum.py \ > devlink_port_split.py \ > + devmem.py \ > ethtool.sh \ > ethtool_extended_state.sh \ > ethtool_mm.sh \ > diff --git a/tools/testing/selftests/drivers/net/hw/devmem.py b/tools/testing/selftests/drivers/net/hw/devmem.py > new file mode 100755 > index 000000000000..1416c31ff81e > --- /dev/null > +++ b/tools/testing/selftests/drivers/net/hw/devmem.py > @@ -0,0 +1,45 @@ > +#!/usr/bin/env python3 > +# SPDX-License-Identifier: GPL-2.0 > + > +from lib.py import ksft_run, ksft_exit > +from lib.py import ksft_eq, KsftSkipEx > +from lib.py import NetDrvEpEnv > +from lib.py import bkg, cmd, rand_port, wait_port_listen > +from lib.py import ksft_disruptive > + > + > +def require_devmem(cfg): > + if not hasattr(cfg, "_devmem_probed"): > + port = rand_port() > + probe_command = f"./ncdevmem -f {cfg.ifname}" > + cfg._devmem_supported = cmd(probe_command, fail=False, shell=True).ret == 0 > + cfg._devmem_probed = True > + > + if not cfg._devmem_supported: > + raise KsftSkipEx("Test requires devmem support") > + > + > +@ksft_disruptive > +def check_rx(cfg) -> None: > + cfg.require_v6() > + require_devmem(cfg) > + > + port = rand_port() > + listen_cmd = f"./ncdevmem -l -f {cfg.ifname} -s {cfg.v6} -p {port}" > + > + with bkg(listen_cmd) as nc: > + wait_port_listen(port) > + cmd(f"echo -e \"hello\\nworld\"| nc {cfg.v6} {port}", host=cfg.remote, shell=True) FWIW, in the v3 of the series I submit, Jakub asked me to replace nc with socat due to issues with nc [1]. Your usage of nc seems pretty basic though, so maybe it's fine? [1]: https://lore.kernel.org/netdev/20241101063426.2e1423a8@kernel.org/
On Mon, 4 Nov 2024 16:15:10 -0800 Joe Damato wrote: > > + with bkg(listen_cmd) as nc: > > + wait_port_listen(port) > > + cmd(f"echo -e \"hello\\nworld\"| nc {cfg.v6} {port}", host=cfg.remote, shell=True) > > FWIW, in the v3 of the series I submit, Jakub asked me to replace nc > with socat due to issues with nc [1]. > > Your usage of nc seems pretty basic though, so maybe it's fine? Good catch, let's not use nc. I seem to recall it's also funny about address family selection. Also may be useful to add a helper for sending simple strings from remote to avoid having this problem again.
On 11/04, Joe Damato wrote: > On Mon, Nov 04, 2024 at 10:14:30AM -0800, Stanislav Fomichev wrote: > > Only RX side for now and small message to test the setup. > > In the future, we can extend it to TX side and to testing > > both sides with a couple of megs of data. > > > > make \ > > -C tools/testing/selftests \ > > TARGETS="drivers/hw/net" \ > > install INSTALL_PATH=~/tmp/ksft > > > > scp ~/tmp/ksft ${HOST}: > > scp ~/tmp/ksft ${PEER}: > > > > cfg+="NETIF=${DEV}\n" > > cfg+="LOCAL_V6=${HOST_IP}\n" > > cfg+="REMOTE_V6=${PEER_IP}\n" > > cfg+="REMOTE_TYPE=ssh\n" > > cfg+="REMOTE_ARGS=root@${PEER}\n" > > > > echo -e "$cfg" | ssh root@${HOST} "cat > ksft/drivers/net/net.config" > > ssh root@${HOST} "cd ksft && ./run_kselftest.sh -t drivers/net:devmem.py" > > > > Reviewed-by: Mina Almasry <almasrymina@google.com> > > Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> > > --- > > .../testing/selftests/drivers/net/hw/Makefile | 1 + > > .../selftests/drivers/net/hw/devmem.py | 45 +++++++++++++++++++ > > 2 files changed, 46 insertions(+) > > create mode 100755 tools/testing/selftests/drivers/net/hw/devmem.py > > > > diff --git a/tools/testing/selftests/drivers/net/hw/Makefile b/tools/testing/selftests/drivers/net/hw/Makefile > > index 182348f4bd40..1c6a77480923 100644 > > --- a/tools/testing/selftests/drivers/net/hw/Makefile > > +++ b/tools/testing/selftests/drivers/net/hw/Makefile > > @@ -3,6 +3,7 @@ > > TEST_PROGS = \ > > csum.py \ > > devlink_port_split.py \ > > + devmem.py \ > > ethtool.sh \ > > ethtool_extended_state.sh \ > > ethtool_mm.sh \ > > diff --git a/tools/testing/selftests/drivers/net/hw/devmem.py b/tools/testing/selftests/drivers/net/hw/devmem.py > > new file mode 100755 > > index 000000000000..1416c31ff81e > > --- /dev/null > > +++ b/tools/testing/selftests/drivers/net/hw/devmem.py > > @@ -0,0 +1,45 @@ > > +#!/usr/bin/env python3 > > +# SPDX-License-Identifier: GPL-2.0 > > + > > +from lib.py import ksft_run, ksft_exit > > +from lib.py import ksft_eq, KsftSkipEx > > +from lib.py import NetDrvEpEnv > > +from lib.py import bkg, cmd, rand_port, wait_port_listen > > +from lib.py import ksft_disruptive > > + > > + > > +def require_devmem(cfg): > > + if not hasattr(cfg, "_devmem_probed"): > > + port = rand_port() > > + probe_command = f"./ncdevmem -f {cfg.ifname}" > > + cfg._devmem_supported = cmd(probe_command, fail=False, shell=True).ret == 0 > > + cfg._devmem_probed = True > > + > > + if not cfg._devmem_supported: > > + raise KsftSkipEx("Test requires devmem support") > > + > > + > > +@ksft_disruptive > > +def check_rx(cfg) -> None: > > + cfg.require_v6() > > + require_devmem(cfg) > > + > > + port = rand_port() > > + listen_cmd = f"./ncdevmem -l -f {cfg.ifname} -s {cfg.v6} -p {port}" > > + > > + with bkg(listen_cmd) as nc: > > + wait_port_listen(port) > > + cmd(f"echo -e \"hello\\nworld\"| nc {cfg.v6} {port}", host=cfg.remote, shell=True) > > FWIW, in the v3 of the series I submit, Jakub asked me to replace nc > with socat due to issues with nc [1]. > > Your usage of nc seems pretty basic though, so maybe it's fine? > > [1]: https://lore.kernel.org/netdev/20241101063426.2e1423a8@kernel.org/ Since I'm doing a respin anyway will try to move to socat as well to keep it uniform, thanks!
diff --git a/tools/testing/selftests/drivers/net/hw/Makefile b/tools/testing/selftests/drivers/net/hw/Makefile index 182348f4bd40..1c6a77480923 100644 --- a/tools/testing/selftests/drivers/net/hw/Makefile +++ b/tools/testing/selftests/drivers/net/hw/Makefile @@ -3,6 +3,7 @@ TEST_PROGS = \ csum.py \ devlink_port_split.py \ + devmem.py \ ethtool.sh \ ethtool_extended_state.sh \ ethtool_mm.sh \ diff --git a/tools/testing/selftests/drivers/net/hw/devmem.py b/tools/testing/selftests/drivers/net/hw/devmem.py new file mode 100755 index 000000000000..1416c31ff81e --- /dev/null +++ b/tools/testing/selftests/drivers/net/hw/devmem.py @@ -0,0 +1,45 @@ +#!/usr/bin/env python3 +# SPDX-License-Identifier: GPL-2.0 + +from lib.py import ksft_run, ksft_exit +from lib.py import ksft_eq, KsftSkipEx +from lib.py import NetDrvEpEnv +from lib.py import bkg, cmd, rand_port, wait_port_listen +from lib.py import ksft_disruptive + + +def require_devmem(cfg): + if not hasattr(cfg, "_devmem_probed"): + port = rand_port() + probe_command = f"./ncdevmem -f {cfg.ifname}" + cfg._devmem_supported = cmd(probe_command, fail=False, shell=True).ret == 0 + cfg._devmem_probed = True + + if not cfg._devmem_supported: + raise KsftSkipEx("Test requires devmem support") + + +@ksft_disruptive +def check_rx(cfg) -> None: + cfg.require_v6() + require_devmem(cfg) + + port = rand_port() + listen_cmd = f"./ncdevmem -l -f {cfg.ifname} -s {cfg.v6} -p {port}" + + with bkg(listen_cmd) as nc: + wait_port_listen(port) + cmd(f"echo -e \"hello\\nworld\"| nc {cfg.v6} {port}", host=cfg.remote, shell=True) + + ksft_eq(nc.stdout.strip(), "hello\nworld") + + +def main() -> None: + with NetDrvEpEnv(__file__) as cfg: + ksft_run([check_rx], + args=(cfg, )) + ksft_exit() + + +if __name__ == "__main__": + main()
Only RX side for now and small message to test the setup. In the future, we can extend it to TX side and to testing both sides with a couple of megs of data. make \ -C tools/testing/selftests \ TARGETS="drivers/hw/net" \ install INSTALL_PATH=~/tmp/ksft scp ~/tmp/ksft ${HOST}: scp ~/tmp/ksft ${PEER}: cfg+="NETIF=${DEV}\n" cfg+="LOCAL_V6=${HOST_IP}\n" cfg+="REMOTE_V6=${PEER_IP}\n" cfg+="REMOTE_TYPE=ssh\n" cfg+="REMOTE_ARGS=root@${PEER}\n" echo -e "$cfg" | ssh root@${HOST} "cat > ksft/drivers/net/net.config" ssh root@${HOST} "cd ksft && ./run_kselftest.sh -t drivers/net:devmem.py" Reviewed-by: Mina Almasry <almasrymina@google.com> Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> --- .../testing/selftests/drivers/net/hw/Makefile | 1 + .../selftests/drivers/net/hw/devmem.py | 45 +++++++++++++++++++ 2 files changed, 46 insertions(+) create mode 100755 tools/testing/selftests/drivers/net/hw/devmem.py