diff mbox series

selftests: Fix typos and grammar in multiple test files

Message ID 20250129145212.37486-1-miguelgarciaroman8@gmail.com (mailing list archive)
State New
Headers show
Series selftests: Fix typos and grammar in multiple test files | expand

Commit Message

Miguel García Jan. 29, 2025, 2:52 p.m. UTC
Signed-off-by: Miguel García <miguelgarciaroman8@gmail.com>
---
 tools/testing/selftests/alsa/mixer-test.c                     | 2 +-
 tools/testing/selftests/arm64/gcs/libc-gcs.c                  | 2 +-
 tools/testing/selftests/cgroup/test_cpuset.c                  | 2 +-
 tools/testing/selftests/mm/gup_longterm.c                     | 2 +-
 tools/testing/selftests/mm/mseal_test.c                       | 2 +-
 tools/testing/selftests/mm/protection_keys.c                  | 4 ++--
 tools/testing/selftests/mm/test_vmalloc.sh                    | 2 +-
 tools/testing/selftests/mount_setattr/mount_setattr_test.c    | 2 +-
 .../pmu/event_code_tests/group_constraint_thresh_sel_test.c   | 4 ++--
 tools/testing/selftests/safesetid/safesetid-test.c            | 2 +-
 10 files changed, 12 insertions(+), 12 deletions(-)
diff mbox series

Patch

diff --git a/tools/testing/selftests/alsa/mixer-test.c b/tools/testing/selftests/alsa/mixer-test.c
index 2a4b2662035e..dc7b290fc4ad 100644
--- a/tools/testing/selftests/alsa/mixer-test.c
+++ b/tools/testing/selftests/alsa/mixer-test.c
@@ -685,7 +685,7 @@  static int write_and_verify(struct ctl_data *ctl,
 	}
 
 	/*
-	 * Use the libray to compare values, if there's a mismatch
+	 * Use the library to compare values, if there's a mismatch
 	 * carry on and try to provide a more useful diagnostic than
 	 * just "mismatch".
 	 */
diff --git a/tools/testing/selftests/arm64/gcs/libc-gcs.c b/tools/testing/selftests/arm64/gcs/libc-gcs.c
index 17b2fabfec38..482e1c634a65 100644
--- a/tools/testing/selftests/arm64/gcs/libc-gcs.c
+++ b/tools/testing/selftests/arm64/gcs/libc-gcs.c
@@ -129,7 +129,7 @@  TEST(gcs_find_terminator)
  * We can access a GCS via ptrace
  *
  * This could usefully have a fixture but note that each test is
- * fork()ed into a new child whcih causes issues.  Might be better to
+ * fork()ed into a new child which causes issues.  Might be better to
  * lift at least some of this out into a separate, non-harness, test
  * program.
  */
diff --git a/tools/testing/selftests/cgroup/test_cpuset.c b/tools/testing/selftests/cgroup/test_cpuset.c
index 4034d14ba69a..3f802e3e8480 100644
--- a/tools/testing/selftests/cgroup/test_cpuset.c
+++ b/tools/testing/selftests/cgroup/test_cpuset.c
@@ -160,7 +160,7 @@  static int test_cpuset_perms_object_deny(const char *root)
 }
 
 /*
- * Migrate a process between parent and child implicitely
+ * Migrate a process between parent and child implicitly
  * Implicit migration happens when a controller is enabled/disabled.
  *
  */
diff --git a/tools/testing/selftests/mm/gup_longterm.c b/tools/testing/selftests/mm/gup_longterm.c
index 9423ad439a61..d2dc3b59a084 100644
--- a/tools/testing/selftests/mm/gup_longterm.c
+++ b/tools/testing/selftests/mm/gup_longterm.c
@@ -154,7 +154,7 @@  static void do_test(int fd, size_t size, enum test_type type, bool shared)
 		/*
 		 * R/O pinning or pinning in a private mapping is always
 		 * expected to work. Otherwise, we expect long-term R/W pinning
-		 * to only succeed for special fielesystems.
+		 * to only succeed for special filesystems.
 		 */
 		should_work = !shared || !rw ||
 			      fs_supports_writable_longterm_pinning(fs_type);
diff --git a/tools/testing/selftests/mm/mseal_test.c b/tools/testing/selftests/mm/mseal_test.c
index 01675c412b2a..2ec2c5aea44a 100644
--- a/tools/testing/selftests/mm/mseal_test.c
+++ b/tools/testing/selftests/mm/mseal_test.c
@@ -732,7 +732,7 @@  static void test_seal_mprotect_two_vma_with_split(bool seal)
 	else
 		FAIL_TEST_IF_FALSE(!ret);
 
-	/* the fouth page is not sealed. */
+	/* the fourth page is not sealed. */
 	ret = sys_mprotect(ptr + 3 * page_size, page_size,
 			PROT_READ | PROT_WRITE);
 	FAIL_TEST_IF_FALSE(!ret);
diff --git a/tools/testing/selftests/mm/protection_keys.c b/tools/testing/selftests/mm/protection_keys.c
index 4990f7ab4cb7..fcac7bb26b7a 100644
--- a/tools/testing/selftests/mm/protection_keys.c
+++ b/tools/testing/selftests/mm/protection_keys.c
@@ -900,7 +900,7 @@  void expected_pkey_fault(int pkey)
 
 #if defined(__i386__) || defined(__x86_64__) /* arch */
 	/*
-	 * The signal handler shold have cleared out PKEY register to let the
+	 * The signal handler should have cleared out PKEY register to let the
 	 * test program continue.  We now have to restore it.
 	 */
 	if (__read_pkey_reg() != 0)
@@ -1372,7 +1372,7 @@  void test_ptrace_of_child(int *ptr, u16 pkey)
 	long ret;
 	int status;
 	/*
-	 * This is the "control" for our little expermient.  Make sure
+	 * This is the "control" for our little experiment.  Make sure
 	 * we can always access it when ptracing.
 	 */
 	int *plain_ptr_unaligned = malloc(HPAGE_SIZE);
diff --git a/tools/testing/selftests/mm/test_vmalloc.sh b/tools/testing/selftests/mm/test_vmalloc.sh
index d73b846736f1..2d4b3e0a6a17 100755
--- a/tools/testing/selftests/mm/test_vmalloc.sh
+++ b/tools/testing/selftests/mm/test_vmalloc.sh
@@ -21,7 +21,7 @@  ksft_skip=4
 
 #
 # Static templates for performance, stressing and smoke tests.
-# Also it is possible to pass any supported parameters manualy.
+# Also it is possible to pass any supported parameters manually.
 #
 PERF_PARAM="sequential_test_order=1 test_repeat_count=3"
 SMOKE_PARAM="test_loop_count=10000 test_repeat_count=10"
diff --git a/tools/testing/selftests/mount_setattr/mount_setattr_test.c b/tools/testing/selftests/mount_setattr/mount_setattr_test.c
index 70f65eb320a7..a6d9f7bd1443 100644
--- a/tools/testing/selftests/mount_setattr/mount_setattr_test.c
+++ b/tools/testing/selftests/mount_setattr/mount_setattr_test.c
@@ -682,7 +682,7 @@  TEST_F(mount_setattr, mount_has_writers)
 	ASSERT_GE(fd, 0);
 
 	/*
-	 * We're holding a fd open to a mount somwhere in the middle so this
+	 * We're holding a fd open to a mount somewhere in the middle so this
 	 * needs to fail somewhere in the middle. After this the mount options
 	 * need to be unchanged.
 	 */
diff --git a/tools/testing/selftests/powerpc/pmu/event_code_tests/group_constraint_thresh_sel_test.c b/tools/testing/selftests/powerpc/pmu/event_code_tests/group_constraint_thresh_sel_test.c
index 50a8cd843ce7..1b1336c1ddb1 100644
--- a/tools/testing/selftests/powerpc/pmu/event_code_tests/group_constraint_thresh_sel_test.c
+++ b/tools/testing/selftests/powerpc/pmu/event_code_tests/group_constraint_thresh_sel_test.c
@@ -34,7 +34,7 @@  static int group_constraint_thresh_sel(void)
 	/* Check for platform support for the test */
 	SKIP_IF(platform_check_for_tests());
 
-	/* Init the events for the group contraint thresh select test */
+	/* Init the events for the group constraint thresh select test */
 	event_init(&leader, EventCode_1);
 	FAIL_IF(event_open(&leader));
 
@@ -45,7 +45,7 @@  static int group_constraint_thresh_sel(void)
 
 	event_close(&event);
 
-	/* Init the event for the group contraint thresh select test */
+	/* Init the event for the group constraint thresh select test */
 	event_init(&event, EventCode_3);
 
 	 /* Expected to succeed as sibling and leader event request same thresh_sel bits */
diff --git a/tools/testing/selftests/safesetid/safesetid-test.c b/tools/testing/selftests/safesetid/safesetid-test.c
index eb9bf0aee951..80f736d545a9 100644
--- a/tools/testing/selftests/safesetid/safesetid-test.c
+++ b/tools/testing/selftests/safesetid/safesetid-test.c
@@ -19,7 +19,7 @@ 
 
 /*
  * NOTES about this test:
- * - requries libcap-dev to be installed on test system
+ * - requires libcap-dev to be installed on test system
  * - requires securityfs to me mounted at /sys/kernel/security, e.g.:
  * mount -n -t securityfs -o nodev,noexec,nosuid securityfs /sys/kernel/security
  * - needs CONFIG_SECURITYFS and CONFIG_SAFESETID to be enabled