@@ -17,6 +17,27 @@ include $(srctree)/scripts/subarch.include
ARCH = $(SUBARCH)
endif
+# XARCH extends the kernel's ARCH with a few variants of the same
+# architecture that only differ by the configuration, the toolchain
+# and the Qemu program used. It is copied as-is into ARCH except for
+# a few specific values which are mapped like this:
+#
+# XARCH | ARCH | config
+# -------------|-----------|-------------------------
+# ppc | powerpc | 32 bits
+# ppc64 | powerpc | 64 bits big endian
+# ppc64le | powerpc | 64 bits little endian
+#
+# It is recommended to only use XARCH, though it does not harm if
+# ARCH is already set. For simplicity, ARCH is sufficient for all
+# architectures where both are equal.
+
+# configure default variants for target kernel supported architectures
+XARCH = $(or $(XARCH_$(ARCH)),$(ARCH))
+
+# map from user input variants to their kernel supported architectures
+ARCH := $(or $(ARCH_$(XARCH)),$(XARCH))
+
# kernel image names by architecture
IMAGE_i386 = arch/x86/boot/bzImage
IMAGE_x86_64 = arch/x86/boot/bzImage
@@ -27,7 +48,7 @@ IMAGE_mips = vmlinuz
IMAGE_riscv = arch/riscv/boot/Image
IMAGE_s390 = arch/s390/boot/bzImage
IMAGE_loongarch = arch/loongarch/boot/vmlinuz.efi
-IMAGE = $(IMAGE_$(ARCH))
+IMAGE = $(IMAGE_$(XARCH))
IMAGE_NAME = $(notdir $(IMAGE))
# default kernel configurations that appear to be usable
@@ -40,7 +61,7 @@ DEFCONFIG_mips = malta_defconfig
DEFCONFIG_riscv = defconfig
DEFCONFIG_s390 = defconfig
DEFCONFIG_loongarch = defconfig
-DEFCONFIG = $(DEFCONFIG_$(ARCH))
+DEFCONFIG = $(DEFCONFIG_$(XARCH))
# optional tests to run (default = all)
TEST =
@@ -55,7 +76,7 @@ QEMU_ARCH_mips = mipsel # works with malta_defconfig
QEMU_ARCH_riscv = riscv64
QEMU_ARCH_s390 = s390x
QEMU_ARCH_loongarch = loongarch64
-QEMU_ARCH = $(QEMU_ARCH_$(ARCH))
+QEMU_ARCH = $(QEMU_ARCH_$(XARCH))
# QEMU_ARGS : some arch-specific args to pass to qemu
QEMU_ARGS_i386 = -M pc -append "console=ttyS0,9600 i8042.noaux panic=-1 $(TEST:%=NOLIBC_TEST=%)"
@@ -67,7 +88,7 @@ QEMU_ARGS_mips = -M malta -append "panic=-1 $(TEST:%=NOLIBC_TEST=%)"
QEMU_ARGS_riscv = -M virt -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)"
QEMU_ARGS_s390 = -M s390-ccw-virtio -m 1G -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)"
QEMU_ARGS_loongarch = -M virt -append "console=ttyS0,115200 panic=-1 $(TEST:%=NOLIBC_TEST=%)"
-QEMU_ARGS = $(QEMU_ARGS_$(ARCH)) $(QEMU_ARGS_EXTRA)
+QEMU_ARGS = $(QEMU_ARGS_$(XARCH)) $(QEMU_ARGS_EXTRA)
# OUTPUT is only set when run from the main makefile, otherwise
# it defaults to this nolibc directory.
@@ -84,7 +105,7 @@ CFLAGS_mips = -EL
CFLAGS_STACKPROTECTOR ?= $(call cc-option,-mstack-protector-guard=global $(call cc-option,-fstack-protector-all))
CFLAGS ?= -Os -fno-ident -fno-asynchronous-unwind-tables -std=c89 \
$(call cc-option,-fno-stack-protector) \
- $(CFLAGS_$(ARCH)) $(CFLAGS_STACKPROTECTOR)
+ $(CFLAGS_$(XARCH)) $(CFLAGS_STACKPROTECTOR)
LDFLAGS := -s
REPORT ?= awk '/\[OK\][\r]*$$/{p++} /\[FAIL\][\r]*$$/{if (!f) printf("\n"); f++; print;} /\[SKIPPED\][\r]*$$/{s++} \
@@ -99,24 +120,25 @@ help:
@echo " sysroot create the nolibc sysroot here (uses \$$ARCH)"
@echo " nolibc-test build the executable (uses \$$CC and \$$CROSS_COMPILE)"
@echo " libc-test build an executable using the compiler's default libc instead"
- @echo " run-user runs the executable under QEMU (uses \$$ARCH, \$$TEST)"
+ @echo " run-user runs the executable under QEMU (uses \$$XARCH, \$$TEST)"
@echo " initramfs prepare the initramfs with nolibc-test"
- @echo " defconfig create a fresh new default config (uses \$$ARCH)"
- @echo " kernel (re)build the kernel with the initramfs (uses \$$ARCH)"
- @echo " run runs the kernel in QEMU after building it (uses \$$ARCH, \$$TEST)"
- @echo " rerun runs a previously prebuilt kernel in QEMU (uses \$$ARCH, \$$TEST)"
+ @echo " defconfig create a fresh new default config (uses \$$XARCH)"
+ @echo " kernel (re)build the kernel with the initramfs (uses \$$XARCH)"
+ @echo " run runs the kernel in QEMU after building it (uses \$$XARCH, \$$TEST)"
+ @echo " rerun runs a previously prebuilt kernel in QEMU (uses \$$XARCH, \$$TEST)"
@echo " clean clean the sysroot, initramfs, build and output files"
@echo ""
@echo "The output file is \"run.out\". Test ranges may be passed using \$$TEST."
@echo ""
@echo "Currently using the following variables:"
@echo " ARCH = $(ARCH)"
+ @echo " XARCH = $(XARCH)"
@echo " CROSS_COMPILE = $(CROSS_COMPILE)"
@echo " CC = $(CC)"
@echo " OUTPUT = $(OUTPUT)"
@echo " TEST = $(TEST)"
- @echo " QEMU_ARCH = $(if $(QEMU_ARCH),$(QEMU_ARCH),UNKNOWN_ARCH) [determined from \$$ARCH]"
- @echo " IMAGE_NAME = $(if $(IMAGE_NAME),$(IMAGE_NAME),UNKNOWN_ARCH) [determined from \$$ARCH]"
+ @echo " QEMU_ARCH = $(if $(QEMU_ARCH),$(QEMU_ARCH),UNKNOWN_ARCH) [determined from \$$XARCH]"
+ @echo " IMAGE_NAME = $(if $(IMAGE_NAME),$(IMAGE_NAME),UNKNOWN_ARCH) [determined from \$$XARCH]"
@echo ""
all: run
Most of the CPU architectures have different variants, but kernel usually only accepts parts of them via the ARCH variable, the others should be customized via kernel config files. To simplify testing, a new XARCH variable is added to extend the kernel's ARCH with a few variants of the same architecture, and it is used to customize variant specific variables, at last XARCH is converted to the kernel's ARCH: e.g. make run XARCH=<one of the supported variants> | \ | `-> variant specific variables: | IMAGE, DEFCONFIG, QEMU_ARCH, QEMU_ARGS, CFLAGS ... \ `---> kernel's ARCH XARCH and ARCH are carefully mapped to allow users to pass architecture variants via XARCH or pass architecture via ARCH from cmdline. PowerPC is the first user and also a very good reference architecture of this mapping, it has variants with different combinations of 32-bit/64-bit and bit endian/little endian. To use this mapping, the other architectures can refer to PowerPC, If the target architecture only has one variant, XARCH is simply an alias of ARCH, no additional mapping required. Suggested-by: Willy Tarreau <w@1wt.eu> Link: https://lore.kernel.org/lkml/20230702171715.GD16233@1wt.eu/ Link: https://lore.kernel.org/lkml/20230730061801.GA7690@1wt.eu/ Reviewed-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Zhangjin Wu <falcon@tinylab.org> --- tools/testing/selftests/nolibc/Makefile | 46 ++++++++++++++++++------- 1 file changed, 34 insertions(+), 12 deletions(-)