@@ -15,10 +15,10 @@ project, see :doc:`start`.
Organization of this document
=============================
-This document is organized into two main sections: Testing and Isolating
-Behavior. The first covers what unit tests are and how to use KUnit to write
-them. The second covers how to use KUnit to isolate code and make it possible
-to unit test code that was otherwise un-unit-testable.
+This document is organized into two main sections: Testing and Common Patterns.
+The first covers what unit tests are and how to use KUnit to write them. The
+second covers common testing patterns, e.g. how to isolate code and make it
+possible to unit test code that was otherwise un-unit-testable.
Testing
=======
@@ -218,8 +218,11 @@ test was built in or not).
For more information on these types of things see the :doc:`api/test`.
+Common Patterns
+===============
+
Isolating Behavior
-==================
+------------------
The most important aspect of unit testing that other forms of testing do not
provide is the ability to limit the amount of code under test to a single unit.
@@ -233,7 +236,7 @@ implementer, and architecture-specific functions which have definitions selected
at compile time.
Classes
--------
+~~~~~~~
Classes are not a construct that is built into the C programming language;
however, it is an easily derived concept. Accordingly, pretty much every project
@@ -451,6 +454,74 @@ We can now use it to test ``struct eeprom_buffer``:
destroy_eeprom_buffer(ctx->eeprom_buffer);
}
+Testing against multiple inputs
+-------------------------------
+
+Testing just a few inputs might not be enough to have confidence that the code
+works correctly, e.g. for a hash function.
+
+In such cases, it can be helpful to have a helper macro or function, e.g. this
+fictitious example for ``sha1sum(1)``
+
+.. code-block:: c
+
+ /* Note: the cast is to satisfy overly strict type-checking. */
+ #define TEST_SHA1(in, want) \
+ sha1sum(in, out); \
+ KUNIT_EXPECT_STREQ_MSG(test, (char *)out, want, "sha1sum(%s)", in);
+
+ char out[40];
+ TEST_SHA1("hello world", "2aae6c35c94fcfb415dbe95f408b9ce91ee846ed");
+ TEST_SHA1("hello world!", "430ce34d020724ed75a196dfc2ad67c77772d169");
+
+
+Note the use of ``KUNIT_EXPECT_STREQ_MSG`` to give more context when it fails
+and make it easier to track down. (Yes, in this example, ``want`` is likely
+going to be unique enough on its own).
+
+The ``_MSG`` variants are even more useful when the same expectation is called
+multiple times (in a loop or helper function) and thus the line number isn't
+enough to identify what failed, like below.
+
+In some cases, it can be helpful to write a *table-driven test* instead, e.g.
+
+.. code-block:: c
+
+ int i;
+ char out[40];
+
+ struct sha1_test_case {
+ const char *str;
+ const char *sha1;
+ };
+
+ struct sha1_test_case cases[] = {
+ {
+ .str = "hello world",
+ .sha1 = "2aae6c35c94fcfb415dbe95f408b9ce91ee846ed",
+ },
+ {
+ .str = "hello world!",
+ .sha1 = "430ce34d020724ed75a196dfc2ad67c77772d169",
+ },
+ };
+ for (i = 0; i < ARRAY_SIZE(cases); ++i) {
+ sha1sum(cases[i].str, out);
+ KUNIT_EXPECT_STREQ_MSG(test, (char *)out, cases[i].sha1,
+ "sha1sum(%s)", cases[i].str);
+ }
+
+
+There's more boilerplate involved, but it can:
+
+* be more readable when there are multiple inputs/outputs thanks to field names,
+
+ * E.g. see ``fs/ext4/inode-test.c`` for an example of both.
+* reduce duplication if test cases can be shared across multiple tests.
+
+ * E.g. if we wanted to also test ``sha256sum``, we could add a ``sha256``
+ field and reuse ``cases``.
+
.. _kunit-on-non-uml:
KUnit on non-UML architectures
@@ -80,6 +80,145 @@ struct timestamp_expectation {
bool lower_bound;
};
+static const struct timestamp_expectation test_data[] = {
+ {
+ .test_case_name = LOWER_BOUND_NEG_NO_EXTRA_BITS_CASE,
+ .msb_set = true,
+ .lower_bound = true,
+ .extra_bits = 0,
+ .expected = {.tv_sec = -0x80000000LL, .tv_nsec = 0L},
+ },
+
+ {
+ .test_case_name = UPPER_BOUND_NEG_NO_EXTRA_BITS_CASE,
+ .msb_set = true,
+ .lower_bound = false,
+ .extra_bits = 0,
+ .expected = {.tv_sec = -1LL, .tv_nsec = 0L},
+ },
+
+ {
+ .test_case_name = LOWER_BOUND_NONNEG_NO_EXTRA_BITS_CASE,
+ .msb_set = false,
+ .lower_bound = true,
+ .extra_bits = 0,
+ .expected = {0LL, 0L},
+ },
+
+ {
+ .test_case_name = UPPER_BOUND_NONNEG_NO_EXTRA_BITS_CASE,
+ .msb_set = false,
+ .lower_bound = false,
+ .extra_bits = 0,
+ .expected = {.tv_sec = 0x7fffffffLL, .tv_nsec = 0L},
+ },
+
+ {
+ .test_case_name = LOWER_BOUND_NEG_LO_1_CASE,
+ .msb_set = true,
+ .lower_bound = true,
+ .extra_bits = 1,
+ .expected = {.tv_sec = 0x80000000LL, .tv_nsec = 0L},
+ },
+
+ {
+ .test_case_name = UPPER_BOUND_NEG_LO_1_CASE,
+ .msb_set = true,
+ .lower_bound = false,
+ .extra_bits = 1,
+ .expected = {.tv_sec = 0xffffffffLL, .tv_nsec = 0L},
+ },
+
+ {
+ .test_case_name = LOWER_BOUND_NONNEG_LO_1_CASE,
+ .msb_set = false,
+ .lower_bound = true,
+ .extra_bits = 1,
+ .expected = {.tv_sec = 0x100000000LL, .tv_nsec = 0L},
+ },
+
+ {
+ .test_case_name = UPPER_BOUND_NONNEG_LO_1_CASE,
+ .msb_set = false,
+ .lower_bound = false,
+ .extra_bits = 1,
+ .expected = {.tv_sec = 0x17fffffffLL, .tv_nsec = 0L},
+ },
+
+ {
+ .test_case_name = LOWER_BOUND_NEG_HI_1_CASE,
+ .msb_set = true,
+ .lower_bound = true,
+ .extra_bits = 2,
+ .expected = {.tv_sec = 0x180000000LL, .tv_nsec = 0L},
+ },
+
+ {
+ .test_case_name = UPPER_BOUND_NEG_HI_1_CASE,
+ .msb_set = true,
+ .lower_bound = false,
+ .extra_bits = 2,
+ .expected = {.tv_sec = 0x1ffffffffLL, .tv_nsec = 0L},
+ },
+
+ {
+ .test_case_name = LOWER_BOUND_NONNEG_HI_1_CASE,
+ .msb_set = false,
+ .lower_bound = true,
+ .extra_bits = 2,
+ .expected = {.tv_sec = 0x200000000LL, .tv_nsec = 0L},
+ },
+
+ {
+ .test_case_name = UPPER_BOUND_NONNEG_HI_1_CASE,
+ .msb_set = false,
+ .lower_bound = false,
+ .extra_bits = 2,
+ .expected = {.tv_sec = 0x27fffffffLL, .tv_nsec = 0L},
+ },
+
+ {
+ .test_case_name = UPPER_BOUND_NONNEG_HI_1_NS_1_CASE,
+ .msb_set = false,
+ .lower_bound = false,
+ .extra_bits = 6,
+ .expected = {.tv_sec = 0x27fffffffLL, .tv_nsec = 1L},
+ },
+
+ {
+ .test_case_name = LOWER_BOUND_NONNEG_HI_1_NS_MAX_CASE,
+ .msb_set = false,
+ .lower_bound = true,
+ .extra_bits = 0xFFFFFFFF,
+ .expected = {.tv_sec = 0x300000000LL,
+ .tv_nsec = MAX_NANOSECONDS},
+ },
+
+ {
+ .test_case_name = LOWER_BOUND_NONNEG_EXTRA_BITS_1_CASE,
+ .msb_set = false,
+ .lower_bound = true,
+ .extra_bits = 3,
+ .expected = {.tv_sec = 0x300000000LL, .tv_nsec = 0L},
+ },
+
+ {
+ .test_case_name = UPPER_BOUND_NONNEG_EXTRA_BITS_1_CASE,
+ .msb_set = false,
+ .lower_bound = false,
+ .extra_bits = 3,
+ .expected = {.tv_sec = 0x37fffffffLL, .tv_nsec = 0L},
+ }
+};
+
+static void timestamp_expectation_to_desc(const struct timestamp_expectation *t,
+ char *desc)
+{
+ strscpy(desc, t->test_case_name, KUNIT_PARAM_DESC_SIZE);
+}
+
+KUNIT_ARRAY_PARAM(ext4_inode, test_data, timestamp_expectation_to_desc);
+
static time64_t get_32bit_time(const struct timestamp_expectation * const test)
{
if (test->msb_set) {
@@ -101,166 +240,35 @@ static time64_t get_32bit_time(const struct timestamp_expectation * const test)
*/
static void inode_test_xtimestamp_decoding(struct kunit *test)
{
- const struct timestamp_expectation test_data[] = {
- {
- .test_case_name = LOWER_BOUND_NEG_NO_EXTRA_BITS_CASE,
- .msb_set = true,
- .lower_bound = true,
- .extra_bits = 0,
- .expected = {.tv_sec = -0x80000000LL, .tv_nsec = 0L},
- },
-
- {
- .test_case_name = UPPER_BOUND_NEG_NO_EXTRA_BITS_CASE,
- .msb_set = true,
- .lower_bound = false,
- .extra_bits = 0,
- .expected = {.tv_sec = -1LL, .tv_nsec = 0L},
- },
-
- {
- .test_case_name = LOWER_BOUND_NONNEG_NO_EXTRA_BITS_CASE,
- .msb_set = false,
- .lower_bound = true,
- .extra_bits = 0,
- .expected = {0LL, 0L},
- },
-
- {
- .test_case_name = UPPER_BOUND_NONNEG_NO_EXTRA_BITS_CASE,
- .msb_set = false,
- .lower_bound = false,
- .extra_bits = 0,
- .expected = {.tv_sec = 0x7fffffffLL, .tv_nsec = 0L},
- },
-
- {
- .test_case_name = LOWER_BOUND_NEG_LO_1_CASE,
- .msb_set = true,
- .lower_bound = true,
- .extra_bits = 1,
- .expected = {.tv_sec = 0x80000000LL, .tv_nsec = 0L},
- },
-
- {
- .test_case_name = UPPER_BOUND_NEG_LO_1_CASE,
- .msb_set = true,
- .lower_bound = false,
- .extra_bits = 1,
- .expected = {.tv_sec = 0xffffffffLL, .tv_nsec = 0L},
- },
-
- {
- .test_case_name = LOWER_BOUND_NONNEG_LO_1_CASE,
- .msb_set = false,
- .lower_bound = true,
- .extra_bits = 1,
- .expected = {.tv_sec = 0x100000000LL, .tv_nsec = 0L},
- },
-
- {
- .test_case_name = UPPER_BOUND_NONNEG_LO_1_CASE,
- .msb_set = false,
- .lower_bound = false,
- .extra_bits = 1,
- .expected = {.tv_sec = 0x17fffffffLL, .tv_nsec = 0L},
- },
-
- {
- .test_case_name = LOWER_BOUND_NEG_HI_1_CASE,
- .msb_set = true,
- .lower_bound = true,
- .extra_bits = 2,
- .expected = {.tv_sec = 0x180000000LL, .tv_nsec = 0L},
- },
-
- {
- .test_case_name = UPPER_BOUND_NEG_HI_1_CASE,
- .msb_set = true,
- .lower_bound = false,
- .extra_bits = 2,
- .expected = {.tv_sec = 0x1ffffffffLL, .tv_nsec = 0L},
- },
-
- {
- .test_case_name = LOWER_BOUND_NONNEG_HI_1_CASE,
- .msb_set = false,
- .lower_bound = true,
- .extra_bits = 2,
- .expected = {.tv_sec = 0x200000000LL, .tv_nsec = 0L},
- },
-
- {
- .test_case_name = UPPER_BOUND_NONNEG_HI_1_CASE,
- .msb_set = false,
- .lower_bound = false,
- .extra_bits = 2,
- .expected = {.tv_sec = 0x27fffffffLL, .tv_nsec = 0L},
- },
-
- {
- .test_case_name = UPPER_BOUND_NONNEG_HI_1_NS_1_CASE,
- .msb_set = false,
- .lower_bound = false,
- .extra_bits = 6,
- .expected = {.tv_sec = 0x27fffffffLL, .tv_nsec = 1L},
- },
-
- {
- .test_case_name = LOWER_BOUND_NONNEG_HI_1_NS_MAX_CASE,
- .msb_set = false,
- .lower_bound = true,
- .extra_bits = 0xFFFFFFFF,
- .expected = {.tv_sec = 0x300000000LL,
- .tv_nsec = MAX_NANOSECONDS},
- },
-
- {
- .test_case_name = LOWER_BOUND_NONNEG_EXTRA_BITS_1_CASE,
- .msb_set = false,
- .lower_bound = true,
- .extra_bits = 3,
- .expected = {.tv_sec = 0x300000000LL, .tv_nsec = 0L},
- },
-
- {
- .test_case_name = UPPER_BOUND_NONNEG_EXTRA_BITS_1_CASE,
- .msb_set = false,
- .lower_bound = false,
- .extra_bits = 3,
- .expected = {.tv_sec = 0x37fffffffLL, .tv_nsec = 0L},
- }
- };
-
struct timespec64 timestamp;
- int i;
-
- for (i = 0; i < ARRAY_SIZE(test_data); ++i) {
- timestamp.tv_sec = get_32bit_time(&test_data[i]);
- ext4_decode_extra_time(×tamp,
- cpu_to_le32(test_data[i].extra_bits));
-
- KUNIT_EXPECT_EQ_MSG(test,
- test_data[i].expected.tv_sec,
- timestamp.tv_sec,
- CASE_NAME_FORMAT,
- test_data[i].test_case_name,
- test_data[i].msb_set,
- test_data[i].lower_bound,
- test_data[i].extra_bits);
- KUNIT_EXPECT_EQ_MSG(test,
- test_data[i].expected.tv_nsec,
- timestamp.tv_nsec,
- CASE_NAME_FORMAT,
- test_data[i].test_case_name,
- test_data[i].msb_set,
- test_data[i].lower_bound,
- test_data[i].extra_bits);
- }
+
+ struct timestamp_expectation *test_param =
+ (struct timestamp_expectation *)(test->param_value);
+
+ timestamp.tv_sec = get_32bit_time(test_param);
+ ext4_decode_extra_time(×tamp,
+ cpu_to_le32(test_param->extra_bits));
+
+ KUNIT_EXPECT_EQ_MSG(test,
+ test_param->expected.tv_sec,
+ timestamp.tv_sec,
+ CASE_NAME_FORMAT,
+ test_param->test_case_name,
+ test_param->msb_set,
+ test_param->lower_bound,
+ test_param->extra_bits);
+ KUNIT_EXPECT_EQ_MSG(test,
+ test_param->expected.tv_nsec,
+ timestamp.tv_nsec,
+ CASE_NAME_FORMAT,
+ test_param->test_case_name,
+ test_param->msb_set,
+ test_param->lower_bound,
+ test_param->extra_bits);
}
static struct kunit_case ext4_inode_test_cases[] = {
- KUNIT_CASE(inode_test_xtimestamp_decoding),
+ KUNIT_CASE_PARAM(inode_test_xtimestamp_decoding, ext4_inode_gen_params),
{}
};
@@ -94,6 +94,9 @@ struct kunit;
/* Size of log associated with test. */
#define KUNIT_LOG_SIZE 512
+/* Maximum size of parameter description string. */
+#define KUNIT_PARAM_DESC_SIZE 128
+
/*
* TAP specifies subtest stream indentation of 4 spaces, 8 spaces for a
* sub-subtest. See the "Subtests" section in
@@ -107,6 +110,7 @@ struct kunit;
*
* @run_case: the function representing the actual test case.
* @name: the name of the test case.
+ * @generate_params: the generator function for parameterized tests.
*
* A test case is a function with the signature,
* ``void (*)(struct kunit *)``
@@ -141,6 +145,7 @@ struct kunit;
struct kunit_case {
void (*run_case)(struct kunit *test);
const char *name;
+ const void* (*generate_params)(const void *prev, char *desc);
/* private: internal use only. */
bool success;
@@ -163,6 +168,27 @@ static inline char *kunit_status_to_string(bool status)
*/
#define KUNIT_CASE(test_name) { .run_case = test_name, .name = #test_name }
+/**
+ * KUNIT_CASE_PARAM - A helper for creation a parameterized &struct kunit_case
+ *
+ * @test_name: a reference to a test case function.
+ * @gen_params: a reference to a parameter generator function.
+ *
+ * The generator function::
+ *
+ * const void* gen_params(const void *prev, char *desc)
+ *
+ * is used to lazily generate a series of arbitrarily typed values that fit into
+ * a void*. The argument @prev is the previously returned value, which should be
+ * used to derive the next value; @prev is set to NULL on the initial generator
+ * call. When no more values are available, the generator must return NULL.
+ * Optionally write a string into @desc (size of KUNIT_PARAM_DESC_SIZE)
+ * describing the parameter.
+ */
+#define KUNIT_CASE_PARAM(test_name, gen_params) \
+ { .run_case = test_name, .name = #test_name, \
+ .generate_params = gen_params }
+
/**
* struct kunit_suite - describes a related collection of &struct kunit_case
*
@@ -208,6 +234,10 @@ struct kunit {
const char *name; /* Read only after initialization! */
char *log; /* Points at case log after initialization */
struct kunit_try_catch try_catch;
+ /* param_value is the current parameter value for a test case. */
+ const void *param_value;
+ /* param_index stores the index of the parameter in parameterized tests. */
+ int param_index;
/*
* success starts as true, and may only be set to false during a
* test case; thus, it is safe to update this across multiple
@@ -1742,4 +1772,25 @@ do { \
fmt, \
##__VA_ARGS__)
+/**
+ * KUNIT_ARRAY_PARAM() - Define test parameter generator from an array.
+ * @name: prefix for the test parameter generator function.
+ * @array: array of test parameters.
+ * @get_desc: function to convert param to description; NULL to use default
+ *
+ * Define function @name_gen_params which uses @array to generate parameters.
+ */
+#define KUNIT_ARRAY_PARAM(name, array, get_desc) \
+ static const void *name##_gen_params(const void *prev, char *desc) \
+ { \
+ typeof((array)[0]) *__next = prev ? ((typeof(__next)) prev) + 1 : (array); \
+ if (__next - (array) < ARRAY_SIZE((array))) { \
+ void (*__get_desc)(typeof(__next), char *) = get_desc; \
+ if (__get_desc) \
+ __get_desc(__next, desc); \
+ return __next; \
+ } \
+ return NULL; \
+ }
+
#endif /* _KUNIT_TEST_H */
@@ -325,39 +325,72 @@ static void kunit_catch_run_case(void *data)
* occur in a test case and reports them as failures.
*/
static void kunit_run_case_catch_errors(struct kunit_suite *suite,
- struct kunit_case *test_case)
+ struct kunit_case *test_case,
+ struct kunit *test)
{
struct kunit_try_catch_context context;
struct kunit_try_catch *try_catch;
- struct kunit test;
- kunit_init_test(&test, test_case->name, test_case->log);
- try_catch = &test.try_catch;
+ kunit_init_test(test, test_case->name, test_case->log);
+ try_catch = &test->try_catch;
kunit_try_catch_init(try_catch,
- &test,
+ test,
kunit_try_run_case,
kunit_catch_run_case);
- context.test = &test;
+ context.test = test;
context.suite = suite;
context.test_case = test_case;
kunit_try_catch_run(try_catch, &context);
- test_case->success = test.success;
-
- kunit_print_ok_not_ok(&test, true, test_case->success,
- kunit_test_case_num(suite, test_case),
- test_case->name);
+ test_case->success = test->success;
}
int kunit_run_tests(struct kunit_suite *suite)
{
+ char param_desc[KUNIT_PARAM_DESC_SIZE];
struct kunit_case *test_case;
kunit_print_subtest_start(suite);
- kunit_suite_for_each_test_case(suite, test_case)
- kunit_run_case_catch_errors(suite, test_case);
+ kunit_suite_for_each_test_case(suite, test_case) {
+ struct kunit test = { .param_value = NULL, .param_index = 0 };
+ bool test_success = true;
+
+ if (test_case->generate_params) {
+ /* Get initial param. */
+ param_desc[0] = '\0';
+ test.param_value = test_case->generate_params(NULL, param_desc);
+ }
+
+ do {
+ kunit_run_case_catch_errors(suite, test_case, &test);
+ test_success &= test_case->success;
+
+ if (test_case->generate_params) {
+ if (param_desc[0] == '\0') {
+ snprintf(param_desc, sizeof(param_desc),
+ "param-%d", test.param_index);
+ }
+
+ kunit_log(KERN_INFO, &test,
+ KUNIT_SUBTEST_INDENT
+ "# %s: %s %d - %s",
+ test_case->name,
+ kunit_status_to_string(test.success),
+ test.param_index + 1, param_desc);
+
+ /* Get next param. */
+ param_desc[0] = '\0';
+ test.param_value = test_case->generate_params(test.param_value, param_desc);
+ test.param_index++;
+ }
+ } while (test.param_value);
+
+ kunit_print_ok_not_ok(&test, true, test_success,
+ kunit_test_case_num(suite, test_case),
+ test_case->name);
+ }
kunit_print_subtest_end(suite);
@@ -23,6 +23,11 @@ DEFAULT_KUNITCONFIG_PATH = 'arch/um/configs/kunit_defconfig'
BROKEN_ALLCONFIG_PATH = 'tools/testing/kunit/configs/broken_on_uml.config'
OUTFILE_PATH = 'test.log'
+def get_file_path(build_dir, default):
+ if build_dir:
+ default = os.path.join(build_dir, default)
+ return default
+
class ConfigError(Exception):
"""Represents an error trying to configure the Linux kernel."""
@@ -97,9 +102,7 @@ class LinuxSourceTreeOperations(object):
def linux_bin(self, params, timeout, build_dir):
"""Runs the Linux UML binary. Must be named 'linux'."""
- linux_bin = './linux'
- if build_dir:
- linux_bin = os.path.join(build_dir, 'linux')
+ linux_bin = get_file_path(build_dir, 'linux')
outfile = get_outfile_path(build_dir)
with open(outfile, 'w') as output:
process = subprocess.Popen([linux_bin] + params,
@@ -108,22 +111,13 @@ class LinuxSourceTreeOperations(object):
process.wait(timeout)
def get_kconfig_path(build_dir):
- kconfig_path = KCONFIG_PATH
- if build_dir:
- kconfig_path = os.path.join(build_dir, KCONFIG_PATH)
- return kconfig_path
+ return get_file_path(build_dir, KCONFIG_PATH)
def get_kunitconfig_path(build_dir):
- kunitconfig_path = KUNITCONFIG_PATH
- if build_dir:
- kunitconfig_path = os.path.join(build_dir, KUNITCONFIG_PATH)
- return kunitconfig_path
+ return get_file_path(build_dir, KUNITCONFIG_PATH)
def get_outfile_path(build_dir):
- outfile_path = OUTFILE_PATH
- if build_dir:
- outfile_path = os.path.join(build_dir, OUTFILE_PATH)
- return outfile_path
+ return get_file_path(build_dir, OUTFILE_PATH)
class LinuxSourceTree(object):
"""Represents a Linux kernel source tree with KUnit tests."""
@@ -135,8 +135,8 @@ def parse_ok_not_ok_test_case(lines: List[str], test_case: TestCase) -> bool:
else:
return False
-SUBTEST_DIAGNOSTIC = re.compile(r'^[\s]+# .*?: (.*)$')
-DIAGNOSTIC_CRASH_MESSAGE = 'kunit test case crashed!'
+SUBTEST_DIAGNOSTIC = re.compile(r'^[\s]+# (.*)$')
+DIAGNOSTIC_CRASH_MESSAGE = re.compile(r'^[\s]+# .*?: kunit test case crashed!$')
def parse_diagnostic(lines: List[str], test_case: TestCase) -> bool:
save_non_diagnositic(lines, test_case)
@@ -146,7 +146,8 @@ def parse_diagnostic(lines: List[str], test_case: TestCase) -> bool:
match = SUBTEST_DIAGNOSTIC.match(line)
if match:
test_case.log.append(lines.pop(0))
- if match.group(1) == DIAGNOSTIC_CRASH_MESSAGE:
+ crash_match = DIAGNOSTIC_CRASH_MESSAGE.match(line)
+ if crash_match:
test_case.status = TestStatus.TEST_CRASHED
return True
else:
Hi Linus, Please pull the following KUnit update for Linux 5.11-rc1. This kunit update for Linux 5.11-rc1 consists of: -- documentation update and fix to kunit_tool to parse diagnostic messages correctly from David Gow -- Support for Parameterized Testing and fs/ext4 test updates to use KUnit parameterized testing feature from Arpitha Raghunandan -- Helper to derive file names depending on --build_dir argument from Andy Shevchenko Please note that fs/ext4 test change is included in this update along with the KUnit framework support it depends on. diff is attached. thanks, -- Shuah ---------------------------------------------------------------- The following changes since commit b65054597872ce3aefbc6a666385eabdf9e288da: Linux 5.10-rc6 (2020-11-29 15:50:50 -0800) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest tags/linux-kselftest-kunit-5.11-rc1 for you to fetch changes up to 5f6b99d0287de2c2d0b5e7abcb0092d553ad804a: fs: ext4: Modify inode-test.c to use KUnit parameterized testing feature (2020-12-02 16:07:25 -0700) ---------------------------------------------------------------- linux-kselftest-kunit-5.11-rc1 This kunit update for Linux 5.11-rc1 consists of: -- documentation update and fix to kunit_tool to parse diagnostic messages correctly from David Gow -- Support for Parameterized Testing and fs/ext4 test updates to use KUnit parameterized testing feature from Arpitha Raghunandan -- Helper to derive file names depending on --build_dir argument from Andy Shevchenko ---------------------------------------------------------------- Andy Shevchenko (1): kunit: Introduce get_file_path() helper Arpitha Raghunandan (2): kunit: Support for Parameterized Testing fs: ext4: Modify inode-test.c to use KUnit parameterized testing feature Daniel Latypov (1): Documentation: kunit: provide guidance for testing many inputs David Gow (1): kunit: kunit_tool: Correctly parse diagnostic messages Documentation/dev-tools/kunit/usage.rst | 83 ++++++++- fs/ext4/inode-test.c | 320 ++++++++++++++++---------------- include/kunit/test.h | 51 +++++ lib/kunit/test.c | 59 ++++-- tools/testing/kunit/kunit_kernel.py | 24 +-- tools/testing/kunit/kunit_parser.py | 7 +- 6 files changed, 351 insertions(+), 193 deletions(-) ----------------------------------------------------------------