@@ -10,10 +10,7 @@ if ! grep -q function_graph available_tracers; then
exit_unsupported
fi
-if [ ! -f set_ftrace_filter ]; then
- echo "set_ftrace_filter not found? Is dynamic ftrace not set?"
- exit_unsupported
-fi
+check_filter_file set_ftrace_filter
do_reset() {
if [ -e /proc/sys/kernel/stack_tracer_enabled ]; then
@@ -9,6 +9,8 @@ if ! grep -q function_graph available_tracers; then
exit_unsupported
fi
+check_filter_file set_ftrace_filter
+
fail() { # msg
echo $1
exit_fail
@@ -9,6 +9,8 @@ if ! grep -q function available_tracers; then
exit_unsupported
fi
+check_filter_file set_ftrace_filter
+
disable_tracing
clear_trace
@@ -15,10 +15,7 @@ if [ ! -f set_ftrace_notrace_pid ]; then
exit_unsupported
fi
-if [ ! -f set_ftrace_filter ]; then
- echo "set_ftrace_filter not found? Is function tracer not set?"
- exit_unsupported
-fi
+check_filter_file set_ftrace_filter
do_function_fork=1
@@ -16,10 +16,7 @@ if [ ! -f set_ftrace_pid ]; then
exit_unsupported
fi
-if [ ! -f set_ftrace_filter ]; then
- echo "set_ftrace_filter not found? Is function tracer not set?"
- exit_unsupported
-fi
+check_filter_file set_ftrace_filter
do_function_fork=1
@@ -3,7 +3,7 @@
# description: ftrace - stacktrace filter command
# flags: instance
-[ ! -f set_ftrace_filter ] && exit_unsupported
+check_filter_file set_ftrace_filter
echo _do_fork:stacktrace >> set_ftrace_filter
@@ -11,10 +11,7 @@
#
# The triggers are set within the set_ftrace_filter file
-if [ ! -f set_ftrace_filter ]; then
- echo "set_ftrace_filter not found? Is dynamic ftrace not set?"
- exit_unsupported
-fi
+check_filter_file set_ftrace_filter
do_reset() {
reset_ftrace_filter
@@ -2,7 +2,7 @@
# SPDX-License-Identifier: GPL-2.0
# description: ftrace - function trace on module
-[ ! -f set_ftrace_filter ] && exit_unsupported
+check_filter_file set_ftrace_filter
: "mod: allows to filter a non exist function"
echo 'non_exist_func:mod:non_exist_module' > set_ftrace_filter
@@ -18,10 +18,7 @@ if ! grep -q function_graph available_tracers; then
exit_unsupported;
fi
-if [ ! -f set_ftrace_filter ]; then
- echo "set_ftrace_filter not found? Is dynamic ftrace not set?"
- exit_unsupported
-fi
+check_filter_file set_ftrace_filter
if [ ! -f function_profile_enabled ]; then
echo "function_profile_enabled not found, function profiling enabled?"
@@ -10,10 +10,7 @@
#
# The triggers are set within the set_ftrace_filter file
-if [ ! -f set_ftrace_filter ]; then
- echo "set_ftrace_filter not found? Is dynamic ftrace not set?"
- exit_unsupported
-fi
+check_filter_file set_ftrace_filter
fail() { # mesg
echo $1
@@ -8,6 +8,8 @@ if [ ! -f stack_trace ]; then
exit_unsupported
fi
+check_filter_file stack_trace_filter
+
echo > stack_trace_filter
echo 0 > stack_max_size
echo 1 > /proc/sys/kernel/stack_tracer_enabled
@@ -11,10 +11,7 @@
#
# The triggers are set within the set_ftrace_filter file
-if [ ! -f set_ftrace_filter ]; then
- echo "set_ftrace_filter not found? Is dynamic ftrace not set?"
- exit_unsupported
-fi
+check_filter_file set_ftrace_filter
fail() { # mesg
echo $1
@@ -1,3 +1,9 @@
+check_filter_file() { # check filter file introduced by dynamic ftrace
+ if [ ! -f "$1" ]; then
+ echo "$1 not found? Is dynamic ftrace not set?"
+ exit_unsupported
+ fi
+}
clear_trace() { # reset trace output
echo > trace
@@ -38,7 +38,7 @@ for width in 64 32 16 8; do
echo 0 > events/kprobes/testprobe/enable
: "Confirm the arguments is recorded in given types correctly"
- ARGS=`grep "testprobe" trace | sed -e 's/.* arg1=\(.*\) arg2=\(.*\) arg3=\(.*\) arg4=\(.*\)/\1 \2 \3 \4/'`
+ ARGS=`grep "testprobe" trace | head -n 1 | sed -e 's/.* arg1=\(.*\) arg2=\(.*\) arg3=\(.*\) arg4=\(.*\)/\1 \2 \3 \4/'`
check_types $ARGS $width
: "Clear event for next loop"
@@ -5,6 +5,8 @@
[ -f kprobe_events ] || exit_unsupported # this is configurable
grep "function" available_tracers || exit_unsupported # this is configurable
+check_filter_file set_ftrace_filter
+
# prepare
echo nop > current_tracer
echo _do_fork > set_ftrace_filter
@@ -1,13 +1,13 @@
# SPDX-License-Identifier: GPL-2.0
-MOUNT_CFLAGS := $(shell pkg-config --cflags mount 2>/dev/null)
-MOUNT_LDLIBS := $(shell pkg-config --libs mount 2>/dev/null)
-ifeq ($(MOUNT_LDLIBS),)
-MOUNT_LDLIBS := -lmount -I/usr/include/libmount
+VAR_CFLAGS := $(shell pkg-config --cflags mount 2>/dev/null)
+VAR_LDLIBS := $(shell pkg-config --libs mount 2>/dev/null)
+ifeq ($(VAR_LDLIBS),)
+VAR_LDLIBS := -lmount -I/usr/include/libmount
endif
-CFLAGS += -O2 -g -std=gnu99 -Wall -I../../../../usr/include/ $(MOUNT_CFLAGS)
-LDLIBS += $(MOUNT_LDLIBS)
+CFLAGS += -O2 -g -std=gnu99 -Wall -I../../../../usr/include/ $(VAR_CFLAGS)
+LDLIBS += $(VAR_LDLIBS)
TEST_PROGS := gpio-mockup.sh
TEST_FILES := gpio-mockup-sysfs.sh
@@ -1,6 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
CFLAGS := $(CFLAGS) -Wall -D_GNU_SOURCE
-LDLIBS := $(LDLIBS) -lm
+LDLIBS += -lm
uname_M := $(shell uname -m 2>/dev/null || echo not)
ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/x86/ -e s/x86_64/x86/)
new file mode 100755
@@ -0,0 +1,272 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# kselftest_deps.sh
+#
+# Checks for kselftest build dependencies on the build system.
+# Copyright (c) 2020 Shuah Khan <skhan@linuxfoundation.org>
+#
+#
+
+usage()
+{
+
+echo -e "Usage: $0 -[p] <compiler> [test_name]\n"
+echo -e "\tkselftest_deps.sh [-p] gcc"
+echo -e "\tkselftest_deps.sh [-p] gcc vm"
+echo -e "\tkselftest_deps.sh [-p] aarch64-linux-gnu-gcc"
+echo -e "\tkselftest_deps.sh [-p] aarch64-linux-gnu-gcc vm\n"
+echo "- Should be run in selftests directory in the kernel repo."
+echo "- Checks if Kselftests can be built/cross-built on a system."
+echo "- Parses all test/sub-test Makefile to find library dependencies."
+echo "- Runs compile test on a trivial C file with LDLIBS specified"
+echo " in the test Makefiles to identify missing library dependencies."
+echo "- Prints suggested target list for a system filtering out tests"
+echo " failed the build dependency check from the TARGETS in Selftests"
+echo " main Makefile when optional -p is specified."
+echo "- Prints pass/fail dependency check for each tests/sub-test."
+echo "- Prints pass/fail targets and libraries."
+echo "- Default: runs dependency checks on all tests."
+echo "- Optional test name can be specified to check dependencies for it."
+exit 1
+
+}
+
+# Start main()
+main()
+{
+
+base_dir=`pwd`
+# Make sure we're in the selftests top-level directory.
+if [ $(basename "$base_dir") != "selftests" ]; then
+ echo -e "\tPlease run $0 in"
+ echo -e "\ttools/testing/selftests directory ..."
+ exit 1
+fi
+
+print_targets=0
+
+while getopts "p" arg; do
+ case $arg in
+ p)
+ print_targets=1
+ shift;;
+ esac
+done
+
+if [ $# -eq 0 ]
+then
+ usage
+fi
+
+# Compiler
+CC=$1
+
+tmp_file=$(mktemp).c
+trap "rm -f $tmp_file.o $tmp_file $tmp_file.bin" EXIT
+#echo $tmp_file
+
+pass=$(mktemp).out
+trap "rm -f $pass" EXIT
+#echo $pass
+
+fail=$(mktemp).out
+trap "rm -f $fail" EXIT
+#echo $fail
+
+# Generate tmp source fire for compile test
+cat << "EOF" > $tmp_file
+int main()
+{
+}
+EOF
+
+# Save results
+total_cnt=0
+fail_trgts=()
+fail_libs=()
+fail_cnt=0
+pass_trgts=()
+pass_libs=()
+pass_cnt=0
+
+# Get all TARGETS from selftests Makefile
+targets=$(egrep "^TARGETS +|^TARGETS =" Makefile | cut -d "=" -f2)
+
+# Single test case
+if [ $# -eq 2 ]
+then
+ test=$2/Makefile
+
+ l1_test $test
+ l2_test $test
+ l3_test $test
+
+ print_results $1 $2
+ exit $?
+fi
+
+# Level 1: LDLIBS set static.
+#
+# Find all LDLIBS set statically for all executables built by a Makefile
+# and filter out VAR_LDLIBS to discard the following:
+# gpio/Makefile:LDLIBS += $(VAR_LDLIBS)
+# Append space at the end of the list to append more tests.
+
+l1_tests=$(grep -r --include=Makefile "^LDLIBS" | \
+ grep -v "VAR_LDLIBS" | awk -F: '{print $1}')
+
+# Level 2: LDLIBS set dynamically.
+#
+# Level 2
+# Some tests have multiple valid LDLIBS lines for individual sub-tests
+# that need dependency checks. Find them and append them to the tests
+# e.g: vm/Makefile:$(OUTPUT)/userfaultfd: LDLIBS += -lpthread
+# Filter out VAR_LDLIBS to discard the following:
+# memfd/Makefile:$(OUTPUT)/fuse_mnt: LDLIBS += $(VAR_LDLIBS)
+# Append space at the end of the list to append more tests.
+
+l2_tests=$(grep -r --include=Makefile ": LDLIBS" | \
+ grep -v "VAR_LDLIBS" | awk -F: '{print $1}')
+
+# Level 3
+# gpio, memfd and others use pkg-config to find mount and fuse libs
+# respectively and save it in VAR_LDLIBS. If pkg-config doesn't find
+# any, VAR_LDLIBS set to default.
+# Use the default value and filter out pkg-config for dependency check.
+# e.g:
+# gpio/Makefile
+# VAR_LDLIBS := $(shell pkg-config --libs mount) 2>/dev/null)
+# memfd/Makefile
+# VAR_LDLIBS := $(shell pkg-config fuse --libs 2>/dev/null)
+
+l3_tests=$(grep -r --include=Makefile "^VAR_LDLIBS" | \
+ grep -v "pkg-config" | awk -F: '{print $1}')
+
+#echo $l1_tests
+#echo $l2_1_tests
+#echo $l3_tests
+
+all_tests
+print_results $1 $2
+
+exit $?
+}
+# end main()
+
+all_tests()
+{
+ for test in $l1_tests; do
+ l1_test $test
+ done
+
+ for test in $l2_tests; do
+ l2_test $test
+ done
+
+ for test in $l3_tests; do
+ l3_test $test
+ done
+}
+
+# Use same parsing used for l1_tests and pick libraries this time.
+l1_test()
+{
+ test_libs=$(grep --include=Makefile "^LDLIBS" $test | \
+ grep -v "VAR_LDLIBS" | \
+ sed -e 's/\:/ /' | \
+ sed -e 's/+/ /' | cut -d "=" -f 2)
+
+ check_libs $test $test_libs
+}
+
+# Use same parsing used for l2__tests and pick libraries this time.
+l2_test()
+{
+ test_libs=$(grep --include=Makefile ": LDLIBS" $test | \
+ grep -v "VAR_LDLIBS" | \
+ sed -e 's/\:/ /' | sed -e 's/+/ /' | \
+ cut -d "=" -f 2)
+
+ check_libs $test $test_libs
+}
+
+l3_test()
+{
+ test_libs=$(grep --include=Makefile "^VAR_LDLIBS" $test | \
+ grep -v "pkg-config" | sed -e 's/\:/ /' |
+ sed -e 's/+/ /' | cut -d "=" -f 2)
+
+ check_libs $test $test_libs
+}
+
+check_libs()
+{
+
+if [[ ! -z "${test_libs// }" ]]
+then
+
+ #echo $test_libs
+
+ for lib in $test_libs; do
+
+ let total_cnt+=1
+ $CC -o $tmp_file.bin $lib $tmp_file > /dev/null 2>&1
+ if [ $? -ne 0 ]; then
+ echo "FAIL: $test dependency check: $lib" >> $fail
+ let fail_cnt+=1
+ fail_libs+="$lib "
+ fail_target=$(echo "$test" | cut -d "/" -f1)
+ fail_trgts+="$fail_target "
+ targets=$(echo "$targets" | grep -v "$fail_target")
+ else
+ echo "PASS: $test dependency check passed $lib" >> $pass
+ let pass_cnt+=1
+ pass_libs+="$lib "
+ pass_trgts+="$(echo "$test" | cut -d "/" -f1) "
+ fi
+
+ done
+fi
+}
+
+print_results()
+{
+ echo -e "========================================================";
+ echo -e "Kselftest Dependency Check for [$0 $1 $2] results..."
+
+ if [ $print_targets -ne 0 ]
+ then
+ echo -e "Suggested Selftest Targets for your configuration:"
+ echo -e "$targets";
+ fi
+
+ echo -e "========================================================";
+ echo -e "Checked tests defining LDLIBS dependencies"
+ echo -e "--------------------------------------------------------";
+ echo -e "Total tests with Dependencies:"
+ echo -e "$total_cnt Pass: $pass_cnt Fail: $fail_cnt";
+
+ if [ $pass_cnt -ne 0 ]; then
+ echo -e "--------------------------------------------------------";
+ cat $pass
+ echo -e "--------------------------------------------------------";
+ echo -e "Targets passed build dependency check on system:"
+ echo -e "$(echo "$pass_trgts" | xargs -n1 | sort -u | xargs)"
+ fi
+
+ if [ $fail_cnt -ne 0 ]; then
+ echo -e "--------------------------------------------------------";
+ cat $fail
+ echo -e "--------------------------------------------------------";
+ echo -e "Targets failed build dependency check on system:"
+ echo -e "$(echo "$fail_trgts" | xargs -n1 | sort -u | xargs)"
+ echo -e "--------------------------------------------------------";
+ echo -e "Missing libraries system"
+ echo -e "$(echo "$fail_libs" | xargs -n1 | sort -u | xargs)"
+ fi
+
+ echo -e "--------------------------------------------------------";
+ echo -e "========================================================";
+}
+
+main "$@"
@@ -8,11 +8,21 @@ TEST_GEN_PROGS := memfd_test
TEST_PROGS := run_fuse_test.sh run_hugetlbfs_test.sh
TEST_GEN_FILES := fuse_test fuse_mnt
-fuse_mnt.o: CFLAGS += $(shell pkg-config fuse --cflags)
+VAR_CFLAGS := $(shell pkg-config fuse --cflags 2>/dev/null)
+ifeq ($(VAR_CFLAGS),)
+VAR_CFLAGS := -D_FILE_OFFSET_BITS=64 -I/usr/include/fuse
+endif
+
+VAR_LDLIBS := $(shell pkg-config fuse --libs 2>/dev/null)
+ifeq ($(VAR_LDLIBS),)
+VAR_LDLIBS := -lfuse -pthread
+endif
+
+fuse_mnt.o: CFLAGS += $(VAR_CFLAGS)
include ../lib.mk
-$(OUTPUT)/fuse_mnt: LDLIBS += $(shell pkg-config fuse --libs)
+$(OUTPUT)/fuse_mnt: LDLIBS += $(VAR_LDLIBS)
$(OUTPUT)/memfd_test: memfd_test.c common.c
$(OUTPUT)/fuse_test: fuse_test.c common.c
Hi Linus, Please pull the following Kselftest update for Linux 5.7-rc4. This kselftest update for Linux 5.7-rc4 consists of: - ftrace test fixes to check for required filter files and kprobe args. - Kselftest build/cross-build dependency check script to make it easier for test ring admins/users to configure build systems correctly for build/cross-build kselftests. Currently checks library dependencies. - Checks if Kselftests can be built/cross-built on a system running compile test on a trivial C file with LDLIBS specified for each individual test in their Makefiles. - Prints suggested target list for a system filtering out tests failed the build dependency check from the TARGETS in Selftests the main Makefile when optional -p is specified. - Prints pass/fail dependency check for each tests/sub-test. - Prints pass/fail targets and libraries. - Default: runs dependency checks on all tests. - Optional test name can be specified to check dependencies for it. diff is attached. thanks, -- Shuah ---------------------------------------------------------------- The following changes since commit b87080eab4c1377706c113fc9c0157f19ea8fed1: selftests/ipc: Fix test failure seen after initial test run (2020-04-14 10:24:28 -0600) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest tags/linux-kselftest-5.7-rc4 for you to fetch changes up to f0c0d0cf590f71b2213b29a7ded2cde3d0a1a0ba: selftests/ftrace: Check the first record for kprobe_args_type.tc (2020-04-24 09:39:26 -0600) ---------------------------------------------------------------- linux-kselftest-5.7-rc4 This kselftest update for Linux 5.7-rc4 consists of: - ftrace test fixes to check for required filter files and kprobe args. - Kselftest build/cross-build dependency check script to make it easier for test ring admins/users to configure build systems correctly for build/cross-build kselftests. Currently checks library dependencies. - Checks if Kselftests can be built/cross-built on a system running compile test on a trivial C file with LDLIBS specified for each individual test in their Makefiles. - Prints suggested target list for a system filtering out tests failed the build dependency check from the TARGETS in Selftests the main Makefile when optional -p is specified. - Prints pass/fail dependency check for each tests/sub-test. - Prints pass/fail targets and libraries. - Default: runs dependency checks on all tests. - Optional test name can be specified to check dependencies for it. ---------------------------------------------------------------- Shuah Khan (1): selftests: add build/cross-build dependency check script Xiao Yang (2): selftests/ftrace: Check required filter files before running test selftests/ftrace: Check the first record for kprobe_args_type.tc .../ftrace/test.d/ftrace/fgraph-filter-stack.tc | 5 +- .../ftrace/test.d/ftrace/fgraph-filter.tc | 2 + .../ftrace/test.d/ftrace/func-filter-glob.tc | 2 + .../test.d/ftrace/func-filter-notrace-pid.tc | 5 +- .../ftrace/test.d/ftrace/func-filter-pid.tc | 5 +- .../ftrace/test.d/ftrace/func-filter-stacktrace.tc | 2 +- .../ftrace/test.d/ftrace/func_event_triggers.tc | 5 +- .../ftrace/test.d/ftrace/func_mod_trace.tc | 2 +- .../ftrace/test.d/ftrace/func_profiler.tc | 5 +- .../ftrace/test.d/ftrace/func_set_ftrace_file.tc | 5 +- .../ftrace/test.d/ftrace/func_stack_tracer.tc | 2 + .../test.d/ftrace/func_traceonoff_triggers.tc | 5 +- tools/testing/selftests/ftrace/test.d/functions | 6 + .../ftrace/test.d/kprobe/kprobe_args_type.tc | 2 +- .../ftrace/test.d/kprobe/kprobe_ftrace.tc | 2 + tools/testing/selftests/gpio/Makefile | 12 +- tools/testing/selftests/intel_pstate/Makefile | 2 +- tools/testing/selftests/kselftest_deps.sh | 272 +++++++++++++++++++++ tools/testing/selftests/memfd/Makefile | 14 +- 19 files changed, 315 insertions(+), 40 deletions(-) create mode 100755 tools/testing/selftests/kselftest_deps.sh ----------------------------------------------------------------