mbox series

[00/16] Updates to ov9282 sensor driver

Message ID 20221005152809.3785786-1-dave.stevenson@raspberrypi.com (mailing list archive)
Headers show
Series Updates to ov9282 sensor driver | expand

Message

Dave Stevenson Oct. 5, 2022, 3:27 p.m. UTC 
This series adds to the functionality of the Ominvision
OV9282 driver to make it usable with libcamera.

Tested on a Raspberry Pi with OV9281 sensor (same as
OV9282 but with alternate CRA on the optics)

Dave Stevenson (16):
  media: i2c: ov9282: Remove duplication of registers
  media: i2c: ov9282: Split registers into common and mode specific
  media: i2c: ov9282: Remove format code from the mode
  media: i2c: ov9282: Remove pixel rate from mode definition
  media: i2c: ov9281: Support more than 1 mode.
  media: i2c: ov9282: Correct HTS register for configured pixel rate
  media: i2c: ov9282: Reduce vblank_min values based on testing
  media: i2c: ov9282: Add selection for CSI2 clock mode
  media: i2c: ov9282: Add the properties from fwnode
  media: i2c: ov9282: Action CID_VBLANK when set.
  media: i2c: ov9282: Add HFLIP and VFLIP support
  media: i2c: ov9282: Make V4L2_CID_HBLANK r/w
  media: i2c: ov9282: Add selection API calls for cropping info
  media: i2c: ov9282: Add support for 1280x800 and 640x400 modes
  media: i2c: ov9282: Add support for 8bit readout
  media: i2c: ov9282: Support event handlers

 drivers/media/i2c/ov9282.c | 552 ++++++++++++++++++++++++++++++-------
 1 file changed, 446 insertions(+), 106 deletions(-)