mbox series

[v4,0/1] media: i2c: Add driver for DW9719 VCM

Message ID 20230706145745.115719-1-hdegoede@redhat.com (mailing list archive)
Headers show
Series media: i2c: Add driver for DW9719 VCM | expand

Message

Hans de Goede July 6, 2023, 2:57 p.m. UTC
Hi All,

Here is Dan's patch to add DW9719 support now back to
a standalone patch again for easier reving of the patch
in response to review comments.

Note this now depends on the new CCI helpers:

https://lore.kernel.org/linux-media/20230627125109.52354-1-hdegoede@redhat.com/

Changes in v4:
- Back to a standalone patch again (instead of being part of a series)
- Switch to using CCI helpers for register access
- Use new DEFINE_RUNTIME_DEV_PM_OPS() for pm-ops
- Make v4l2_subdev first member of dw9719_device
- Drop v4l2_ctrl_handler_init() ret value check
- Turn of VCM on dw9719_remove() if necessary

Regards,

Hans


Daniel Scally (1):
  media: i2c: Add driver for DW9719 VCM

 MAINTAINERS                |   7 +
 drivers/media/i2c/Kconfig  |  12 ++
 drivers/media/i2c/Makefile |   1 +
 drivers/media/i2c/dw9719.c | 348 +++++++++++++++++++++++++++++++++++++
 4 files changed, 368 insertions(+)
 create mode 100644 drivers/media/i2c/dw9719.c