mbox series

[v3,0/2] media: Add onsemi MT9M114 camera sensor driver

Message ID 20230919232636.19755-1-laurent.pinchart@ideasonboard.com (mailing list archive)
Headers show
Series media: Add onsemi MT9M114 camera sensor driver | expand

Message

Laurent Pinchart Sept. 19, 2023, 11:26 p.m. UTC 
Hello,

This series adds a driver for the onsemi MT9M114 camera sensor. It's all
a pretty standard story, DT bindings are in 1/2, and the driver in 2/2.
Review comments from v2 have all been taken into account as far as I can
tell.

The driver has been tested with an i.MX8MM in CSI-2 mode. Jacopo tested
v2 in parallel mode, but given the number of changes in v3, I haven't
kept the Tested-by tag.

Laurent Pinchart (2):
  media: dt-bindings: media: i2c: Add MT9M114 camera sensor binding
  media: i2c: Add driver for onsemi MT9M114 camera sensor

 .../bindings/media/i2c/onnn,mt9m114.yaml      |  114 +
 MAINTAINERS                                   |    8 +
 drivers/media/i2c/Kconfig                     |   10 +
 drivers/media/i2c/Makefile                    |    1 +
 drivers/media/i2c/mt9m114.c                   | 2482 +++++++++++++++++
 5 files changed, 2615 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/onnn,mt9m114.yaml
 create mode 100644 drivers/media/i2c/mt9m114.c


base-commit: 0bb80ecc33a8fb5a682236443c1e740d5c917d1d