mbox series

[v9,0/3] media: i2c: Add support for alvium camera

Message ID 20230928145638.2268331-1-tomm.merciai@gmail.com (mailing list archive)
Headers show
Series media: i2c: Add support for alvium camera | expand

Message

Tommaso Merciai Sept. 28, 2023, 2:56 p.m. UTC 
Hi all,

This series add support for Allied Vision Alvium camera.
The Alvium camera is shipped with sensor + isp in the same housing.
The camera can be equipped with one out of various sensor and abstract
the user from this. Camera is connected via MIPI CSI-2.

Driver use last v4l2 V4L2_CCI_I2C.

https://www.alliedvision.com/en/products/embedded-vision-solutions/

Tested the following alvium models:
 - alvium 1500c-c500
 - alvium 1800c-2050c
 - alvium 1800c-1240c
 - alvium 1800c-0040c

Note:
 - Driver is rebased on top of [1], commit [2].

Thanks & Regards,
Tommaso

 - [1] https://git.linuxtv.org/sailus/media_tree.git/log/
 - [2] media: dt-bindings: hynix,hi846: Document orientation and rotation (5801d7688e4f)

Tommaso Merciai (3):
  dt-bindings: vendor-prefixes: Add prefix alliedvision
  media: dt-bindings: alvium: add document YAML binding
  media: i2c: Add support for alvium camera

 .../media/i2c/alliedvision,alvium-csi2.yaml   |   97 +
 .../devicetree/bindings/vendor-prefixes.yaml  |    2 +
 MAINTAINERS                                   |    9 +
 drivers/media/i2c/Kconfig                     |   10 +
 drivers/media/i2c/Makefile                    |    1 +
 drivers/media/i2c/alvium-csi2.c               | 2761 +++++++++++++++++
 drivers/media/i2c/alvium-csi2.h               |  474 +++
 7 files changed, 3354 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/alliedvision,alvium-csi2.yaml
 create mode 100644 drivers/media/i2c/alvium-csi2.c
 create mode 100644 drivers/media/i2c/alvium-csi2.h