| Message ID | 20231107081345.3172392-1-alain.volmat@foss.st.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | media: i2c: gc2145: GC2145 sensor support | expand |
Hi! > This serie adds support for the GalaxyCore GC2145 sensor. > Initialization is based on scripts provided by GalaxyCore, > allowing 3 fixed configurations supported for the time being. There is another version of the driver, from Ondrej Jirman, floating around. See mail "gc2145 camera driver (front camera on PinePhone)". I've added some cc-s in case people wanted to comment on it. Best regards, Pavel
This serie adds support for the GalaxyCore GC2145 sensor. Initialization is based on scripts provided by GalaxyCore, allowing 3 fixed configurations supported for the time being. Minimum controls have been added in order to allow it to be successfully used with libcamera and dcmipp driver (under review) on STM32MP13 platform. The sensor also supports Bayer formats however I removed them for the time being since they would require more controls to be exposed. They will be added again later on. v3: - fix copyright year - add more gc2145_ func or variable prefixes - removal of colorspace within struct gc2145_format - use 1X16 formats since driver is supporting CSI-2 interface only - use msleep instead of usleep_range - add pm_runtime_ last_busy & autosuspend handling - only start streaming AFTER applying ctrls - correct RGB565 format to generate _LE instead of _BE - perform pm_runtime configuration prior to v4l2_async_register_subdev_sensor - remove frame_interval handling and expose HBLANK/VBLANK ctrls instead v2: - split vendor-prefixes update into a separate commit - correction into dt-bindings (description, const i2c address, lowcase of supplies, node naming - correct KConfig (avoid VIDEO_V4L2_SUBDEV_API, V4L2_FWNODE and add V4L2_CCI_I2C) - usage of v4l2-cci framework for accessing to device registers - correction in power-on / power-off sequences and update usleep_range delay - detail MIPI configuration and stop register access to stop streaming - removal of SYSTEM_SLEEP_PM_OPS (and streaming variable) - various small fixes, typo, oneline functions - removal of useless HBLANK control considereing that RAW isn't supported for the time being - removal of RAW parts - usage of dev_err_probe Alain Volmat (3): dt-bindings: vendor-prefixes: Add prefix for GalaxyCore Inc. dt-bindings: media: i2c: add galaxycore,gc2145 dt-bindings media: i2c: gc2145: Galaxy Core GC2145 sensor support .../bindings/media/i2c/galaxycore,gc2145.yaml | 104 ++ .../devicetree/bindings/vendor-prefixes.yaml | 2 + MAINTAINERS | 8 + drivers/media/i2c/Kconfig | 10 + drivers/media/i2c/Makefile | 1 + drivers/media/i2c/gc2145.c | 1404 +++++++++++++++++ 6 files changed, 1529 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/i2c/galaxycore,gc2145.yaml create mode 100644 drivers/media/i2c/gc2145.c