Add a v4l2 sensor driver for OmniVision OV64A40
----------------- V4L2 Compliance ---------------------------------------------
./utils/v4l2-compliance/v4l2-compliance -d /dev/v4l-subdev0
v4l2-compliance 1.25.0-5100, 32 bits, 32-bit time_t
v4l2-compliance SHA: 8bf6cba8c0ef 2023-10-10 12:50:46
Total for device /dev/v4l-subdev0: 44, Succeeded: 44, Failed: 0, Warnings: 0
----------------- Build scripts -----------------------------------------------
date: Wed Dec 6 14:52:17 CET 2023
media-tree git repo: git://git.kernel.org/pub/scm/linux/kernel/git/jmondi/linux.git
media-tree git branch: jmondi/ov64a40/mainline-v5
media-tree git hash: e7196a51fae1cbf69ca9891711019ddc20ed0a8a
v4l-utils git hash: 4a6a3725dd192759c2998311b00440b84c60df57
edid-decode git hash: 5f723267e04deb3aa9610483514a02bcee10d9c2
gcc version: i686-linux-gcc (GCC) 13.1.0
ccache version: ccache version 4.7.5
smatch/sparse repo: git://repo.or.cz/smatch.git
smatch version: v0.5.0-8526-gd4827317
sparse version: v0.5.0-8526-gd4827317
build-scripts repo: https://git.linuxtv.org/hverkuil/build-scripts.git
build-scripts git hash: 745fc7cf5ba1a1a841374c61e8470852232584c1
host hardware: x86_64
host os: 6.1.0-10-amd64
linux-git-powerpc64: OK
linux-git-arm: OK
linux-git-arm64: OK
linux-git-i686: OK
linux-git-x86_64: OK
no-acpi.config: OK
no-of.config: OK
no-pm.config: OK
no-pm-sleep.config: OK
no-debug-fs.config: OK
sparse: WARNINGS:
drivers/media/usb/siano/smsusb.c:53:38: warning: array of flexible structures
smatch: WARNINGS:
drivers/media/i2c/adv7180.c:1514 adv7180_probe() warn: 'client->irq' from request_threaded_irq() not released on lines: 1514.
drivers/media/usb/siano/smsusb.c:53:38: warning: array of flexible structures
drivers/media/i2c/ov64a40.c:3562 ov64a40_probe() warn: passing zero to 'PTR_ERR'
drivers/media/platform/st/sti/hva/hva-hw.c:412 hva_hw_probe() warn: 'hva->clk' from clk_prepare() not released on lines: 412.
COMPILE_TEST: OK
strcpy/strncpy/strlcpy: OK
abi-compliance: ABI OK
pahole: ABI OK
spec-git: OK
kerneldoc: OK
-------------------------------------------------------------------------------
The smatch() warning reported here above:
drivers/media/i2c/ov64a40.c:3562 ov64a40_probe() warn: passing zero to 'PTR_ERR'
has been fixed.
v5->v6:
- Defined analogue_crop width and height as proper width/heights and subtract 1
when writing X_END/Y_END to registers
- Make the DTS property link-frequencies required in bindings
v4->v5:
* Fix review comments received on RPi pull request (thanks Dave for review)
https://github.com/raspberrypi/linux/pull/5708
* Handle runtime_pm in s_ctrl like it's done in CCS
* Add support for test patterns
* Add 8000x6000 mode
* Use decimal numbers in modes definitions
v3->v4:
* Fix a few additional warnings reported by kernel test robot (which arrived a
few minutes after sending v3 out :(
v2->v3:
* Restore max size of 9248x6944
* Select V4L2_CCI_I2C in Kconfig
* Fix unused variable warning
* Fix a few minor checkpatch warnings
v1->v2:
* rebased on sailus master
* Use new subdev state helpers
* link frequency support (456MHz, 360MHz)
* invert vflip bit setting
* remove 1280x720 mode as it was broken
* expanded VTS range to 24 bits
* Reduce max resolution output to 9152x6944. Using full output resolution causes
green frames to be produced by the ISP (the raw frames are however correct)
* reduce max analogue gain to 16x
*** BLURB HERE ***
Jacopo Mondi (2):
media: dt-bindings: Add OmniVision OV64A40
media: i2c: Add driver for OmniVision OV64A40
.../bindings/media/i2c/ovti,ov64a40.yaml | 101 +
MAINTAINERS | 8 +
drivers/media/i2c/Kconfig | 11 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/ov64a40.c | 3686 +++++++++++++++++
5 files changed, 3807 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov64a40.yaml
create mode 100644 drivers/media/i2c/ov64a40.c
--
2.41.0