mbox series

[0/2] media: Add driver for ST VD56G3 camera sensor

Message ID 20240417133453.17406-1-sylvain.petinot@foss.st.com (mailing list archive)
Headers show
Series media: Add driver for ST VD56G3 camera sensor | expand

Message

Sylvain Petinot April 17, 2024, 1:34 p.m. UTC
Hello,

This serie adds support for STMicroelectronics VD56G3 camera sensor.
This is a 1.5M pixel global shutter camera available in both Mono
(VD56G3) and colour (VD66GY) variants.

The following features are supported:
- Auto exposure with expo bias or
- Manual exposure with analog / digital gain
- H/V flip
- vblank/hblank/link freq
- Test pattern
- Supported resolutions in both raw8/raw10 :
   - 1124x1364
   - 1120x1360
   - 1024x1280
   - 1024x768
   - 768x1024
   - 720x1280
   - 640x480
   - 480x640
   - 320x240


This driver supports coldstart parameters for internal AE feature.
To make it work, the driver save gain/expo values in ctrl's cur.val
during poweroff phase.
This implementation transgress V4L2 rules... Any advice to make it
proper would be greatly appreciated.

Driver tested on RB5 and RPI (with and without libcamera).


Sylvain Petinot (2):
  media: dt-bindings: Add ST VD56G3 camera sensor binding
  media: i2c: Add driver for ST VD56G3 camera sensor

 .../bindings/media/i2c/st,st-vd56g3.yaml      |  143 ++
 MAINTAINERS                                   |    9 +
 drivers/media/i2c/Kconfig                     |   11 +
 drivers/media/i2c/Makefile                    |    1 +
 drivers/media/i2c/st-vd56g3.c                 | 1619 +++++++++++++++++
 5 files changed, 1783 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/st,st-vd56g3.yaml
 create mode 100644 drivers/media/i2c/st-vd56g3.c