Message ID | 20240510112252.800-1-jackson.lee@chipsnmedia.com (mailing list archive) |
---|---|
Headers | show |
Series | Add features to an existing driver | expand |
Hi sebastian and Nicolas I sent the v4 patch. Can you please review them ? https://lore.kernel.org/linux-media/20240510112252.800-1-jackson.lee@chipsnmedia.com/ thanks Jackson > -----Original Message----- > From: jackson.lee <jackson.lee@chipsnmedia.com> > Sent: Friday, May 10, 2024 8:23 PM > To: mchehab@kernel.org; nicolas@ndufresne.ca; sebastian.fricke@collabora.com > Cc: linux-media@vger.kernel.org; linux-kernel@vger.kernel.org; > hverkuil@xs4all.nl; Nas Chung <nas.chung@chipsnmedia.com>; lafley.kim > <lafley.kim@chipsnmedia.com>; b-brnich@ti.com; jackson.lee > <jackson.lee@chipsnmedia.com> > Subject: [RESEND PATCH v4 0/4] Add features to an existing driver > > From: "Jackson.lee" <jackson.lee@chipsnmedia.com> > > The wave5 codec driver is a stateful encoder/decoder. > The following patches is for supporting yuv422 inpuy format, supporting > runtime suspend/resume feature and extra things. > > v4l2-compliance results: > ======================== > > v4l2-compliance 1.24.1, 64 bits, 64-bit time_t > > Buffer ioctls: > warn: v4l2-test-buffers.cpp(693): VIDIOC_CREATE_BUFS not supported > warn: v4l2-test-buffers.cpp(693): VIDIOC_CREATE_BUFS not supported > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK > test VIDIOC_EXPBUF: OK > test Requests: OK (Not Supported) > > Total for wave5-dec device /dev/video0: 45, Succeeded: 45, Failed: 0, > Warnings: 2 Total for wave5-enc device /dev/video1: 45, Succeeded: 45, Failed: > 0, Warnings: 0 > > Fluster test results: > ===================== > > Running test suite JCT-VC-HEVC_V1 with decoder GStreamer-H.265-V4L2-Gst1.0 > Using 1 parallel job(s) > Ran 132/147 tests successfully in 97.421 secs > > (1 test fails because of not supporting to parse multi frames, 1 test fails > because of a missing frame and slight corruption, > 2 tests fail because of sizes which are incompatible with the IP, 11 tests > fail because of unsupported 10 bit format) > > Running test suite JVT-AVC_V1 with decoder GStreamer-H.264-V4L2-Gst1.0 Using > 1 parallel job(s) > Ran 77/135 tests successfully in 37.233 secs > > (58 fail because the hardware is unable to decode MBAFF / FMO / Field / > Extended profile streams.) > > Change since v3: > ================= > > * For [PATCH v4 1/4] media: chips-media: wave5: Support SPS/PPS generation > for each IDR > - add Reviewed-By tag > > * For [PATCH v4 2/4] media: chips-media: wave5: Support runtime > suspend/resume > - add Reviewed-By tag > > * For [PATCH v4 3/4] media: chips-media: wave5: Use helpers to calculate > bytesperline and sizeimage. > - modify the commit message > - define three framesize structures for decoder > > * For [PATCH v4 4/4] media: chips-media: wave5: Support YUV422 raw pixel- > formats on the encoder > - modify the commit message > - use the v4l2_format_info to calculate luma, chroma size > > Change since v2: > ================= > > * For [PATCH v3 0/4] media: chips-media: wave5: Support SPS/PPS generation > for each IDR > - add the suggested _SHIFT suffix > > * For [PATCH v3 1/4] media: chips-media: wave5: Support runtime > suspend/resume > - change a commit message > > * For [PATCH v3 2/4] media: chips-media: wave5: Use helpers to calculate > bytesperline and sizeimage > - add pix_fmt_type parameter into wave5_update_pix_fmt function > - add min/max width/height values into dec_fmt_list > > Change since v1: > ================= > > * For [PATCH v2 0/4] media: chips-media: wave5: Support SPS/PPS generation > for each IDR > - define a macro for register addresses > > * For [PATCH v2 1/4] media: chips-media: wave5: Support runtime > suspend/resume > - add auto suspend/resume > > * For [PATCH v2 2/4] media: chips-media: wave5: Use helpers to calculate > bytesperline and sizeimage > - use helper functions to calculate bytesperline and sizeimage > > * For [PATCH v2 3/4] media: chips-media: wave5: Support YUV422 raw pixel- > formats on the encoder > - remove unnecessary codes > > Change since v0: > ================= > The DEFAULT_SRC_SIZE macro was defined using multiple lines, To make a simple > define, tab and multiple lines has been removed, The macro is defined using > one line. > > Jackson.lee (4): > media: chips-media: wave5: Support SPS/PPS generation for each IDR > media: chips-media: wave5: Support runtime suspend/resume > media: chips-media: wave5: Use helpers to calculate bytesperline and > sizeimage. > media: chips-media: wave5: Support YUV422 raw pixel-formats on the > encoder. > > .../platform/chips-media/wave5/wave5-helper.c | 24 ++ > .../platform/chips-media/wave5/wave5-helper.h | 5 + > .../platform/chips-media/wave5/wave5-hw.c | 23 +- > .../chips-media/wave5/wave5-vpu-dec.c | 312 +++++++----------- > .../chips-media/wave5/wave5-vpu-enc.c | 300 +++++++++-------- > .../platform/chips-media/wave5/wave5-vpu.c | 43 +++ > .../platform/chips-media/wave5/wave5-vpu.h | 5 +- > .../platform/chips-media/wave5/wave5-vpuapi.c | 14 +- > .../platform/chips-media/wave5/wave5-vpuapi.h | 1 + > .../chips-media/wave5/wave5-vpuconfig.h | 27 +- > .../media/platform/chips-media/wave5/wave5.h | 3 + > 11 files changed, 414 insertions(+), 343 deletions(-) > > -- > 2.43.0
Hey Jackson, On 20.05.2024 01:45, jackson.lee wrote: >Hi sebastian and Nicolas > >I sent the v4 patch. Can you please review them ? so overall this looks good now, but there are still a few warnings: https://linux-media.pages.freedesktop.org/-/users/sebastianfricke/-/jobs/59559963/artifacts/report.htm Could you please look into those? (Please tell me if you can't access the link) > >https://lore.kernel.org/linux-media/20240510112252.800-1-jackson.lee@chipsnmedia.com/ > > >thanks >Jackson Regards, Sebastian > >> -----Original Message----- >> From: jackson.lee <jackson.lee@chipsnmedia.com> >> Sent: Friday, May 10, 2024 8:23 PM >> To: mchehab@kernel.org; nicolas@ndufresne.ca; sebastian.fricke@collabora.com >> Cc: linux-media@vger.kernel.org; linux-kernel@vger.kernel.org; >> hverkuil@xs4all.nl; Nas Chung <nas.chung@chipsnmedia.com>; lafley.kim >> <lafley.kim@chipsnmedia.com>; b-brnich@ti.com; jackson.lee >> <jackson.lee@chipsnmedia.com> >> Subject: [RESEND PATCH v4 0/4] Add features to an existing driver >> >> From: "Jackson.lee" <jackson.lee@chipsnmedia.com> >> >> The wave5 codec driver is a stateful encoder/decoder. >> The following patches is for supporting yuv422 inpuy format, supporting >> runtime suspend/resume feature and extra things. >> >> v4l2-compliance results: >> ======================== >> >> v4l2-compliance 1.24.1, 64 bits, 64-bit time_t >> >> Buffer ioctls: >> warn: v4l2-test-buffers.cpp(693): VIDIOC_CREATE_BUFS not supported >> warn: v4l2-test-buffers.cpp(693): VIDIOC_CREATE_BUFS not supported >> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK >> test VIDIOC_EXPBUF: OK >> test Requests: OK (Not Supported) >> >> Total for wave5-dec device /dev/video0: 45, Succeeded: 45, Failed: 0, >> Warnings: 2 Total for wave5-enc device /dev/video1: 45, Succeeded: 45, Failed: >> 0, Warnings: 0 >> >> Fluster test results: >> ===================== >> >> Running test suite JCT-VC-HEVC_V1 with decoder GStreamer-H.265-V4L2-Gst1.0 >> Using 1 parallel job(s) >> Ran 132/147 tests successfully in 97.421 secs >> >> (1 test fails because of not supporting to parse multi frames, 1 test fails >> because of a missing frame and slight corruption, >> 2 tests fail because of sizes which are incompatible with the IP, 11 tests >> fail because of unsupported 10 bit format) >> >> Running test suite JVT-AVC_V1 with decoder GStreamer-H.264-V4L2-Gst1.0 Using >> 1 parallel job(s) >> Ran 77/135 tests successfully in 37.233 secs >> >> (58 fail because the hardware is unable to decode MBAFF / FMO / Field / >> Extended profile streams.) >> >> Change since v3: >> ================= >> >> * For [PATCH v4 1/4] media: chips-media: wave5: Support SPS/PPS generation >> for each IDR >> - add Reviewed-By tag >> >> * For [PATCH v4 2/4] media: chips-media: wave5: Support runtime >> suspend/resume >> - add Reviewed-By tag >> >> * For [PATCH v4 3/4] media: chips-media: wave5: Use helpers to calculate >> bytesperline and sizeimage. >> - modify the commit message >> - define three framesize structures for decoder >> >> * For [PATCH v4 4/4] media: chips-media: wave5: Support YUV422 raw pixel- >> formats on the encoder >> - modify the commit message >> - use the v4l2_format_info to calculate luma, chroma size >> >> Change since v2: >> ================= >> >> * For [PATCH v3 0/4] media: chips-media: wave5: Support SPS/PPS generation >> for each IDR >> - add the suggested _SHIFT suffix >> >> * For [PATCH v3 1/4] media: chips-media: wave5: Support runtime >> suspend/resume >> - change a commit message >> >> * For [PATCH v3 2/4] media: chips-media: wave5: Use helpers to calculate >> bytesperline and sizeimage >> - add pix_fmt_type parameter into wave5_update_pix_fmt function >> - add min/max width/height values into dec_fmt_list >> >> Change since v1: >> ================= >> >> * For [PATCH v2 0/4] media: chips-media: wave5: Support SPS/PPS generation >> for each IDR >> - define a macro for register addresses >> >> * For [PATCH v2 1/4] media: chips-media: wave5: Support runtime >> suspend/resume >> - add auto suspend/resume >> >> * For [PATCH v2 2/4] media: chips-media: wave5: Use helpers to calculate >> bytesperline and sizeimage >> - use helper functions to calculate bytesperline and sizeimage >> >> * For [PATCH v2 3/4] media: chips-media: wave5: Support YUV422 raw pixel- >> formats on the encoder >> - remove unnecessary codes >> >> Change since v0: >> ================= >> The DEFAULT_SRC_SIZE macro was defined using multiple lines, To make a simple >> define, tab and multiple lines has been removed, The macro is defined using >> one line. >> >> Jackson.lee (4): >> media: chips-media: wave5: Support SPS/PPS generation for each IDR >> media: chips-media: wave5: Support runtime suspend/resume >> media: chips-media: wave5: Use helpers to calculate bytesperline and >> sizeimage. >> media: chips-media: wave5: Support YUV422 raw pixel-formats on the >> encoder. >> >> .../platform/chips-media/wave5/wave5-helper.c | 24 ++ >> .../platform/chips-media/wave5/wave5-helper.h | 5 + >> .../platform/chips-media/wave5/wave5-hw.c | 23 +- >> .../chips-media/wave5/wave5-vpu-dec.c | 312 +++++++----------- >> .../chips-media/wave5/wave5-vpu-enc.c | 300 +++++++++-------- >> .../platform/chips-media/wave5/wave5-vpu.c | 43 +++ >> .../platform/chips-media/wave5/wave5-vpu.h | 5 +- >> .../platform/chips-media/wave5/wave5-vpuapi.c | 14 +- >> .../platform/chips-media/wave5/wave5-vpuapi.h | 1 + >> .../chips-media/wave5/wave5-vpuconfig.h | 27 +- >> .../media/platform/chips-media/wave5/wave5.h | 3 + >> 11 files changed, 414 insertions(+), 343 deletions(-) >> >> -- >> 2.43.0 >
Hi Sebastian Thanks for the update. We will check them. Thanks > -----Original Message----- > From: sebastian.fricke@collabora.com <sebastian.fricke@collabora.com> > Sent: Thursday, June 6, 2024 9:44 PM > To: jackson.lee <jackson.lee@chipsnmedia.com> > Cc: mchehab@kernel.org; nicolas@ndufresne.ca; linux-media@vger.kernel.org; > linux-kernel@vger.kernel.org; hverkuil@xs4all.nl; Nas Chung > <nas.chung@chipsnmedia.com>; lafley.kim <lafley.kim@chipsnmedia.com>; b- > brnich@ti.com > Subject: Re: [RESEND PATCH v4 0/4] Add features to an existing driver > > Hey Jackson, > > On 20.05.2024 01:45, jackson.lee wrote: > >Hi sebastian and Nicolas > > > >I sent the v4 patch. Can you please review them ? > > so overall this looks good now, but there are still a few warnings: > https://linux-media.pages.freedesktop.org/-/users/sebastianfricke/- > /jobs/59559963/artifacts/report.htm > > Could you please look into those? (Please tell me if you can't access the > link) > > > > >https://lore.kernel.org/linux-media/20240510112252.800-1-jackson.lee@ch > >ipsnmedia.com/ > > > > > >thanks > >Jackson > > Regards, > Sebastian > > > > >> -----Original Message----- > >> From: jackson.lee <jackson.lee@chipsnmedia.com> > >> Sent: Friday, May 10, 2024 8:23 PM > >> To: mchehab@kernel.org; nicolas@ndufresne.ca; > >> sebastian.fricke@collabora.com > >> Cc: linux-media@vger.kernel.org; linux-kernel@vger.kernel.org; > >> hverkuil@xs4all.nl; Nas Chung <nas.chung@chipsnmedia.com>; lafley.kim > >> <lafley.kim@chipsnmedia.com>; b-brnich@ti.com; jackson.lee > >> <jackson.lee@chipsnmedia.com> > >> Subject: [RESEND PATCH v4 0/4] Add features to an existing driver > >> > >> From: "Jackson.lee" <jackson.lee@chipsnmedia.com> > >> > >> The wave5 codec driver is a stateful encoder/decoder. > >> The following patches is for supporting yuv422 inpuy format, > >> supporting runtime suspend/resume feature and extra things. > >> > >> v4l2-compliance results: > >> ======================== > >> > >> v4l2-compliance 1.24.1, 64 bits, 64-bit time_t > >> > >> Buffer ioctls: > >> warn: v4l2-test-buffers.cpp(693): VIDIOC_CREATE_BUFS not > supported > >> warn: v4l2-test-buffers.cpp(693): VIDIOC_CREATE_BUFS not > supported > >> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK > >> test VIDIOC_EXPBUF: OK > >> test Requests: OK (Not Supported) > >> > >> Total for wave5-dec device /dev/video0: 45, Succeeded: 45, Failed: 0, > >> Warnings: 2 Total for wave5-enc device /dev/video1: 45, Succeeded: 45, > Failed: > >> 0, Warnings: 0 > >> > >> Fluster test results: > >> ===================== > >> > >> Running test suite JCT-VC-HEVC_V1 with decoder > >> GStreamer-H.265-V4L2-Gst1.0 Using 1 parallel job(s) > >> Ran 132/147 tests successfully in 97.421 secs > >> > >> (1 test fails because of not supporting to parse multi frames, 1 test > >> fails because of a missing frame and slight corruption, > >> 2 tests fail because of sizes which are incompatible with the IP, 11 > >> tests fail because of unsupported 10 bit format) > >> > >> Running test suite JVT-AVC_V1 with decoder > >> GStreamer-H.264-V4L2-Gst1.0 Using > >> 1 parallel job(s) > >> Ran 77/135 tests successfully in 37.233 secs > >> > >> (58 fail because the hardware is unable to decode MBAFF / FMO / > >> Field / Extended profile streams.) > >> > >> Change since v3: > >> ================= > >> > >> * For [PATCH v4 1/4] media: chips-media: wave5: Support SPS/PPS > >> generation for each IDR > >> - add Reviewed-By tag > >> > >> * For [PATCH v4 2/4] media: chips-media: wave5: Support runtime > >> suspend/resume > >> - add Reviewed-By tag > >> > >> * For [PATCH v4 3/4] media: chips-media: wave5: Use helpers to > >> calculate bytesperline and sizeimage. > >> - modify the commit message > >> - define three framesize structures for decoder > >> > >> * For [PATCH v4 4/4] media: chips-media: wave5: Support YUV422 raw > >> pixel- formats on the encoder > >> - modify the commit message > >> - use the v4l2_format_info to calculate luma, chroma size > >> > >> Change since v2: > >> ================= > >> > >> * For [PATCH v3 0/4] media: chips-media: wave5: Support SPS/PPS > >> generation for each IDR > >> - add the suggested _SHIFT suffix > >> > >> * For [PATCH v3 1/4] media: chips-media: wave5: Support runtime > >> suspend/resume > >> - change a commit message > >> > >> * For [PATCH v3 2/4] media: chips-media: wave5: Use helpers to > >> calculate bytesperline and sizeimage > >> - add pix_fmt_type parameter into wave5_update_pix_fmt function > >> - add min/max width/height values into dec_fmt_list > >> > >> Change since v1: > >> ================= > >> > >> * For [PATCH v2 0/4] media: chips-media: wave5: Support SPS/PPS > >> generation for each IDR > >> - define a macro for register addresses > >> > >> * For [PATCH v2 1/4] media: chips-media: wave5: Support runtime > >> suspend/resume > >> - add auto suspend/resume > >> > >> * For [PATCH v2 2/4] media: chips-media: wave5: Use helpers to > >> calculate bytesperline and sizeimage > >> - use helper functions to calculate bytesperline and sizeimage > >> > >> * For [PATCH v2 3/4] media: chips-media: wave5: Support YUV422 raw > >> pixel- formats on the encoder > >> - remove unnecessary codes > >> > >> Change since v0: > >> ================= > >> The DEFAULT_SRC_SIZE macro was defined using multiple lines, To make > >> a simple define, tab and multiple lines has been removed, The macro > >> is defined using one line. > >> > >> Jackson.lee (4): > >> media: chips-media: wave5: Support SPS/PPS generation for each IDR > >> media: chips-media: wave5: Support runtime suspend/resume > >> media: chips-media: wave5: Use helpers to calculate bytesperline and > >> sizeimage. > >> media: chips-media: wave5: Support YUV422 raw pixel-formats on the > >> encoder. > >> > >> .../platform/chips-media/wave5/wave5-helper.c | 24 ++ > >> .../platform/chips-media/wave5/wave5-helper.h | 5 + > >> .../platform/chips-media/wave5/wave5-hw.c | 23 +- > >> .../chips-media/wave5/wave5-vpu-dec.c | 312 +++++++----------- > >> .../chips-media/wave5/wave5-vpu-enc.c | 300 +++++++++-------- > >> .../platform/chips-media/wave5/wave5-vpu.c | 43 +++ > >> .../platform/chips-media/wave5/wave5-vpu.h | 5 +- > >> .../platform/chips-media/wave5/wave5-vpuapi.c | 14 +- > >> .../platform/chips-media/wave5/wave5-vpuapi.h | 1 + > >> .../chips-media/wave5/wave5-vpuconfig.h | 27 +- > >> .../media/platform/chips-media/wave5/wave5.h | 3 + > >> 11 files changed, 414 insertions(+), 343 deletions(-) > >> > >> -- > >> 2.43.0 > >
Hi Sebastian Should we send the v5 patch after fixing the warning messages? Thanks Jackson > -----Original Message----- > From: sebastian.fricke@collabora.com <sebastian.fricke@collabora.com> > Sent: Thursday, June 6, 2024 9:44 PM > To: jackson.lee <jackson.lee@chipsnmedia.com> > Cc: mchehab@kernel.org; nicolas@ndufresne.ca; linux-media@vger.kernel.org; > linux-kernel@vger.kernel.org; hverkuil@xs4all.nl; Nas Chung > <nas.chung@chipsnmedia.com>; lafley.kim <lafley.kim@chipsnmedia.com>; b- > brnich@ti.com > Subject: Re: [RESEND PATCH v4 0/4] Add features to an existing driver > > Hey Jackson, > > On 20.05.2024 01:45, jackson.lee wrote: > >Hi sebastian and Nicolas > > > >I sent the v4 patch. Can you please review them ? > > so overall this looks good now, but there are still a few warnings: > https://linux-media.pages.freedesktop.org/-/users/sebastianfricke/- > /jobs/59559963/artifacts/report.htm > > Could you please look into those? (Please tell me if you can't access the > link) > > > > >https://lore.kernel.org/linux-media/20240510112252.800-1-jackson.lee@ch > >ipsnmedia.com/ > > > > > >thanks > >Jackson > > Regards, > Sebastian > > > > >> -----Original Message----- > >> From: jackson.lee <jackson.lee@chipsnmedia.com> > >> Sent: Friday, May 10, 2024 8:23 PM > >> To: mchehab@kernel.org; nicolas@ndufresne.ca; > >> sebastian.fricke@collabora.com > >> Cc: linux-media@vger.kernel.org; linux-kernel@vger.kernel.org; > >> hverkuil@xs4all.nl; Nas Chung <nas.chung@chipsnmedia.com>; lafley.kim > >> <lafley.kim@chipsnmedia.com>; b-brnich@ti.com; jackson.lee > >> <jackson.lee@chipsnmedia.com> > >> Subject: [RESEND PATCH v4 0/4] Add features to an existing driver > >> > >> From: "Jackson.lee" <jackson.lee@chipsnmedia.com> > >> > >> The wave5 codec driver is a stateful encoder/decoder. > >> The following patches is for supporting yuv422 inpuy format, > >> supporting runtime suspend/resume feature and extra things. > >> > >> v4l2-compliance results: > >> ======================== > >> > >> v4l2-compliance 1.24.1, 64 bits, 64-bit time_t > >> > >> Buffer ioctls: > >> warn: v4l2-test-buffers.cpp(693): VIDIOC_CREATE_BUFS not > supported > >> warn: v4l2-test-buffers.cpp(693): VIDIOC_CREATE_BUFS not > supported > >> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK > >> test VIDIOC_EXPBUF: OK > >> test Requests: OK (Not Supported) > >> > >> Total for wave5-dec device /dev/video0: 45, Succeeded: 45, Failed: 0, > >> Warnings: 2 Total for wave5-enc device /dev/video1: 45, Succeeded: 45, > Failed: > >> 0, Warnings: 0 > >> > >> Fluster test results: > >> ===================== > >> > >> Running test suite JCT-VC-HEVC_V1 with decoder > >> GStreamer-H.265-V4L2-Gst1.0 Using 1 parallel job(s) > >> Ran 132/147 tests successfully in 97.421 secs > >> > >> (1 test fails because of not supporting to parse multi frames, 1 test > >> fails because of a missing frame and slight corruption, > >> 2 tests fail because of sizes which are incompatible with the IP, 11 > >> tests fail because of unsupported 10 bit format) > >> > >> Running test suite JVT-AVC_V1 with decoder > >> GStreamer-H.264-V4L2-Gst1.0 Using > >> 1 parallel job(s) > >> Ran 77/135 tests successfully in 37.233 secs > >> > >> (58 fail because the hardware is unable to decode MBAFF / FMO / > >> Field / Extended profile streams.) > >> > >> Change since v3: > >> ================= > >> > >> * For [PATCH v4 1/4] media: chips-media: wave5: Support SPS/PPS > >> generation for each IDR > >> - add Reviewed-By tag > >> > >> * For [PATCH v4 2/4] media: chips-media: wave5: Support runtime > >> suspend/resume > >> - add Reviewed-By tag > >> > >> * For [PATCH v4 3/4] media: chips-media: wave5: Use helpers to > >> calculate bytesperline and sizeimage. > >> - modify the commit message > >> - define three framesize structures for decoder > >> > >> * For [PATCH v4 4/4] media: chips-media: wave5: Support YUV422 raw > >> pixel- formats on the encoder > >> - modify the commit message > >> - use the v4l2_format_info to calculate luma, chroma size > >> > >> Change since v2: > >> ================= > >> > >> * For [PATCH v3 0/4] media: chips-media: wave5: Support SPS/PPS > >> generation for each IDR > >> - add the suggested _SHIFT suffix > >> > >> * For [PATCH v3 1/4] media: chips-media: wave5: Support runtime > >> suspend/resume > >> - change a commit message > >> > >> * For [PATCH v3 2/4] media: chips-media: wave5: Use helpers to > >> calculate bytesperline and sizeimage > >> - add pix_fmt_type parameter into wave5_update_pix_fmt function > >> - add min/max width/height values into dec_fmt_list > >> > >> Change since v1: > >> ================= > >> > >> * For [PATCH v2 0/4] media: chips-media: wave5: Support SPS/PPS > >> generation for each IDR > >> - define a macro for register addresses > >> > >> * For [PATCH v2 1/4] media: chips-media: wave5: Support runtime > >> suspend/resume > >> - add auto suspend/resume > >> > >> * For [PATCH v2 2/4] media: chips-media: wave5: Use helpers to > >> calculate bytesperline and sizeimage > >> - use helper functions to calculate bytesperline and sizeimage > >> > >> * For [PATCH v2 3/4] media: chips-media: wave5: Support YUV422 raw > >> pixel- formats on the encoder > >> - remove unnecessary codes > >> > >> Change since v0: > >> ================= > >> The DEFAULT_SRC_SIZE macro was defined using multiple lines, To make > >> a simple define, tab and multiple lines has been removed, The macro > >> is defined using one line. > >> > >> Jackson.lee (4): > >> media: chips-media: wave5: Support SPS/PPS generation for each IDR > >> media: chips-media: wave5: Support runtime suspend/resume > >> media: chips-media: wave5: Use helpers to calculate bytesperline and > >> sizeimage. > >> media: chips-media: wave5: Support YUV422 raw pixel-formats on the > >> encoder. > >> > >> .../platform/chips-media/wave5/wave5-helper.c | 24 ++ > >> .../platform/chips-media/wave5/wave5-helper.h | 5 + > >> .../platform/chips-media/wave5/wave5-hw.c | 23 +- > >> .../chips-media/wave5/wave5-vpu-dec.c | 312 +++++++----------- > >> .../chips-media/wave5/wave5-vpu-enc.c | 300 +++++++++-------- > >> .../platform/chips-media/wave5/wave5-vpu.c | 43 +++ > >> .../platform/chips-media/wave5/wave5-vpu.h | 5 +- > >> .../platform/chips-media/wave5/wave5-vpuapi.c | 14 +- > >> .../platform/chips-media/wave5/wave5-vpuapi.h | 1 + > >> .../chips-media/wave5/wave5-vpuconfig.h | 27 +- > >> .../media/platform/chips-media/wave5/wave5.h | 3 + > >> 11 files changed, 414 insertions(+), 343 deletions(-) > >> > >> -- > >> 2.43.0 > >
Hey Jackson, On 07.06.2024 11:01, jackson.lee wrote: >Hi Sebastian > >Should we send the v5 patch after fixing the warning messages? Yes please that would be great :). > >Thanks >Jackson Regards, Sebastian > > >> -----Original Message----- >> From: sebastian.fricke@collabora.com <sebastian.fricke@collabora.com> >> Sent: Thursday, June 6, 2024 9:44 PM >> To: jackson.lee <jackson.lee@chipsnmedia.com> >> Cc: mchehab@kernel.org; nicolas@ndufresne.ca; linux-media@vger.kernel.org; >> linux-kernel@vger.kernel.org; hverkuil@xs4all.nl; Nas Chung >> <nas.chung@chipsnmedia.com>; lafley.kim <lafley.kim@chipsnmedia.com>; b- >> brnich@ti.com >> Subject: Re: [RESEND PATCH v4 0/4] Add features to an existing driver >> >> Hey Jackson, >> >> On 20.05.2024 01:45, jackson.lee wrote: >> >Hi sebastian and Nicolas >> > >> >I sent the v4 patch. Can you please review them ? >> >> so overall this looks good now, but there are still a few warnings: >> https://linux-media.pages.freedesktop.org/-/users/sebastianfricke/- >> /jobs/59559963/artifacts/report.htm >> >> Could you please look into those? (Please tell me if you can't access the >> link) >> >> > >> >https://lore.kernel.org/linux-media/20240510112252.800-1-jackson.lee@ch >> >ipsnmedia.com/ >> > >> > >> >thanks >> >Jackson >> >> Regards, >> Sebastian >> >> > >> >> -----Original Message----- >> >> From: jackson.lee <jackson.lee@chipsnmedia.com> >> >> Sent: Friday, May 10, 2024 8:23 PM >> >> To: mchehab@kernel.org; nicolas@ndufresne.ca; >> >> sebastian.fricke@collabora.com >> >> Cc: linux-media@vger.kernel.org; linux-kernel@vger.kernel.org; >> >> hverkuil@xs4all.nl; Nas Chung <nas.chung@chipsnmedia.com>; lafley.kim >> >> <lafley.kim@chipsnmedia.com>; b-brnich@ti.com; jackson.lee >> >> <jackson.lee@chipsnmedia.com> >> >> Subject: [RESEND PATCH v4 0/4] Add features to an existing driver >> >> >> >> From: "Jackson.lee" <jackson.lee@chipsnmedia.com> >> >> >> >> The wave5 codec driver is a stateful encoder/decoder. >> >> The following patches is for supporting yuv422 inpuy format, >> >> supporting runtime suspend/resume feature and extra things. >> >> >> >> v4l2-compliance results: >> >> ======================== >> >> >> >> v4l2-compliance 1.24.1, 64 bits, 64-bit time_t >> >> >> >> Buffer ioctls: >> >> warn: v4l2-test-buffers.cpp(693): VIDIOC_CREATE_BUFS not >> supported >> >> warn: v4l2-test-buffers.cpp(693): VIDIOC_CREATE_BUFS not >> supported >> >> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK >> >> test VIDIOC_EXPBUF: OK >> >> test Requests: OK (Not Supported) >> >> >> >> Total for wave5-dec device /dev/video0: 45, Succeeded: 45, Failed: 0, >> >> Warnings: 2 Total for wave5-enc device /dev/video1: 45, Succeeded: 45, >> Failed: >> >> 0, Warnings: 0 >> >> >> >> Fluster test results: >> >> ===================== >> >> >> >> Running test suite JCT-VC-HEVC_V1 with decoder >> >> GStreamer-H.265-V4L2-Gst1.0 Using 1 parallel job(s) >> >> Ran 132/147 tests successfully in 97.421 secs >> >> >> >> (1 test fails because of not supporting to parse multi frames, 1 test >> >> fails because of a missing frame and slight corruption, >> >> 2 tests fail because of sizes which are incompatible with the IP, 11 >> >> tests fail because of unsupported 10 bit format) >> >> >> >> Running test suite JVT-AVC_V1 with decoder >> >> GStreamer-H.264-V4L2-Gst1.0 Using >> >> 1 parallel job(s) >> >> Ran 77/135 tests successfully in 37.233 secs >> >> >> >> (58 fail because the hardware is unable to decode MBAFF / FMO / >> >> Field / Extended profile streams.) >> >> >> >> Change since v3: >> >> ================= >> >> >> >> * For [PATCH v4 1/4] media: chips-media: wave5: Support SPS/PPS >> >> generation for each IDR >> >> - add Reviewed-By tag >> >> >> >> * For [PATCH v4 2/4] media: chips-media: wave5: Support runtime >> >> suspend/resume >> >> - add Reviewed-By tag >> >> >> >> * For [PATCH v4 3/4] media: chips-media: wave5: Use helpers to >> >> calculate bytesperline and sizeimage. >> >> - modify the commit message >> >> - define three framesize structures for decoder >> >> >> >> * For [PATCH v4 4/4] media: chips-media: wave5: Support YUV422 raw >> >> pixel- formats on the encoder >> >> - modify the commit message >> >> - use the v4l2_format_info to calculate luma, chroma size >> >> >> >> Change since v2: >> >> ================= >> >> >> >> * For [PATCH v3 0/4] media: chips-media: wave5: Support SPS/PPS >> >> generation for each IDR >> >> - add the suggested _SHIFT suffix >> >> >> >> * For [PATCH v3 1/4] media: chips-media: wave5: Support runtime >> >> suspend/resume >> >> - change a commit message >> >> >> >> * For [PATCH v3 2/4] media: chips-media: wave5: Use helpers to >> >> calculate bytesperline and sizeimage >> >> - add pix_fmt_type parameter into wave5_update_pix_fmt function >> >> - add min/max width/height values into dec_fmt_list >> >> >> >> Change since v1: >> >> ================= >> >> >> >> * For [PATCH v2 0/4] media: chips-media: wave5: Support SPS/PPS >> >> generation for each IDR >> >> - define a macro for register addresses >> >> >> >> * For [PATCH v2 1/4] media: chips-media: wave5: Support runtime >> >> suspend/resume >> >> - add auto suspend/resume >> >> >> >> * For [PATCH v2 2/4] media: chips-media: wave5: Use helpers to >> >> calculate bytesperline and sizeimage >> >> - use helper functions to calculate bytesperline and sizeimage >> >> >> >> * For [PATCH v2 3/4] media: chips-media: wave5: Support YUV422 raw >> >> pixel- formats on the encoder >> >> - remove unnecessary codes >> >> >> >> Change since v0: >> >> ================= >> >> The DEFAULT_SRC_SIZE macro was defined using multiple lines, To make >> >> a simple define, tab and multiple lines has been removed, The macro >> >> is defined using one line. >> >> >> >> Jackson.lee (4): >> >> media: chips-media: wave5: Support SPS/PPS generation for each IDR >> >> media: chips-media: wave5: Support runtime suspend/resume >> >> media: chips-media: wave5: Use helpers to calculate bytesperline and >> >> sizeimage. >> >> media: chips-media: wave5: Support YUV422 raw pixel-formats on the >> >> encoder. >> >> >> >> .../platform/chips-media/wave5/wave5-helper.c | 24 ++ >> >> .../platform/chips-media/wave5/wave5-helper.h | 5 + >> >> .../platform/chips-media/wave5/wave5-hw.c | 23 +- >> >> .../chips-media/wave5/wave5-vpu-dec.c | 312 +++++++----------- >> >> .../chips-media/wave5/wave5-vpu-enc.c | 300 +++++++++-------- >> >> .../platform/chips-media/wave5/wave5-vpu.c | 43 +++ >> >> .../platform/chips-media/wave5/wave5-vpu.h | 5 +- >> >> .../platform/chips-media/wave5/wave5-vpuapi.c | 14 +- >> >> .../platform/chips-media/wave5/wave5-vpuapi.h | 1 + >> >> .../chips-media/wave5/wave5-vpuconfig.h | 27 +- >> >> .../media/platform/chips-media/wave5/wave5.h | 3 + >> >> 11 files changed, 414 insertions(+), 343 deletions(-) >> >> >> >> -- >> >> 2.43.0 >> >
From: "Jackson.lee" <jackson.lee@chipsnmedia.com> The wave5 codec driver is a stateful encoder/decoder. The following patches is for supporting yuv422 inpuy format, supporting runtime suspend/resume feature and extra things. v4l2-compliance results: ======================== v4l2-compliance 1.24.1, 64 bits, 64-bit time_t Buffer ioctls: warn: v4l2-test-buffers.cpp(693): VIDIOC_CREATE_BUFS not supported warn: v4l2-test-buffers.cpp(693): VIDIOC_CREATE_BUFS not supported test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK test VIDIOC_EXPBUF: OK test Requests: OK (Not Supported) Total for wave5-dec device /dev/video0: 45, Succeeded: 45, Failed: 0, Warnings: 2 Total for wave5-enc device /dev/video1: 45, Succeeded: 45, Failed: 0, Warnings: 0 Fluster test results: ===================== Running test suite JCT-VC-HEVC_V1 with decoder GStreamer-H.265-V4L2-Gst1.0 Using 1 parallel job(s) Ran 132/147 tests successfully in 97.421 secs (1 test fails because of not supporting to parse multi frames, 1 test fails because of a missing frame and slight corruption, 2 tests fail because of sizes which are incompatible with the IP, 11 tests fail because of unsupported 10 bit format) Running test suite JVT-AVC_V1 with decoder GStreamer-H.264-V4L2-Gst1.0 Using 1 parallel job(s) Ran 77/135 tests successfully in 37.233 secs (58 fail because the hardware is unable to decode MBAFF / FMO / Field / Extended profile streams.) Change since v3: ================= * For [PATCH v4 1/4] media: chips-media: wave5: Support SPS/PPS generation for each IDR - add Reviewed-By tag * For [PATCH v4 2/4] media: chips-media: wave5: Support runtime suspend/resume - add Reviewed-By tag * For [PATCH v4 3/4] media: chips-media: wave5: Use helpers to calculate bytesperline and sizeimage. - modify the commit message - define three framesize structures for decoder * For [PATCH v4 4/4] media: chips-media: wave5: Support YUV422 raw pixel-formats on the encoder - modify the commit message - use the v4l2_format_info to calculate luma, chroma size Change since v2: ================= * For [PATCH v3 0/4] media: chips-media: wave5: Support SPS/PPS generation for each IDR - add the suggested _SHIFT suffix * For [PATCH v3 1/4] media: chips-media: wave5: Support runtime suspend/resume - change a commit message * For [PATCH v3 2/4] media: chips-media: wave5: Use helpers to calculate bytesperline and sizeimage - add pix_fmt_type parameter into wave5_update_pix_fmt function - add min/max width/height values into dec_fmt_list Change since v1: ================= * For [PATCH v2 0/4] media: chips-media: wave5: Support SPS/PPS generation for each IDR - define a macro for register addresses * For [PATCH v2 1/4] media: chips-media: wave5: Support runtime suspend/resume - add auto suspend/resume * For [PATCH v2 2/4] media: chips-media: wave5: Use helpers to calculate bytesperline and sizeimage - use helper functions to calculate bytesperline and sizeimage * For [PATCH v2 3/4] media: chips-media: wave5: Support YUV422 raw pixel-formats on the encoder - remove unnecessary codes Change since v0: ================= The DEFAULT_SRC_SIZE macro was defined using multiple lines, To make a simple define, tab and multiple lines has been removed, The macro is defined using one line. Jackson.lee (4): media: chips-media: wave5: Support SPS/PPS generation for each IDR media: chips-media: wave5: Support runtime suspend/resume media: chips-media: wave5: Use helpers to calculate bytesperline and sizeimage. media: chips-media: wave5: Support YUV422 raw pixel-formats on the encoder. .../platform/chips-media/wave5/wave5-helper.c | 24 ++ .../platform/chips-media/wave5/wave5-helper.h | 5 + .../platform/chips-media/wave5/wave5-hw.c | 23 +- .../chips-media/wave5/wave5-vpu-dec.c | 312 +++++++----------- .../chips-media/wave5/wave5-vpu-enc.c | 300 +++++++++-------- .../platform/chips-media/wave5/wave5-vpu.c | 43 +++ .../platform/chips-media/wave5/wave5-vpu.h | 5 +- .../platform/chips-media/wave5/wave5-vpuapi.c | 14 +- .../platform/chips-media/wave5/wave5-vpuapi.h | 1 + .../chips-media/wave5/wave5-vpuconfig.h | 27 +- .../media/platform/chips-media/wave5/wave5.h | 3 + 11 files changed, 414 insertions(+), 343 deletions(-)