mbox series

[v4,0/5] media: i2c: imx219: Fixes for blanking and pixel rate

Message ID 20241226-imx219_fixes-v4-0-dd28383f06f7@ideasonboard.com (mailing list archive)
Headers show
Series media: i2c: imx219: Fixes for blanking and pixel rate | expand

Message

Jai Luthra Dec. 26, 2024, 7:49 a.m. UTC 
This series has a few fixes for improving h/v blanking and pixel rate
reporting for the IMX219 sensor.

These patches are picked and modified (and squashed where applicable)
from the rpi-6.6.y vendor tree.

On top of those changes, this series also updates the PLL multipliers
and minimum line length to fix some issues seen when using analog
binning with RAW10 format on higher resolutions (like 1640x1232).

Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
---
Changes in v4:
- Add PATCH 2/5 to rename VTS to FRM_LENGTH
- PATCH 3/5:
    - Match macro names to datasheet (LINE_LENGTH instead of HTS/PPL)
    - Improve comments in init_controls()
    - Use prev_line_len instead of prev_hts
- Add PATCH 4/5 to update PLL settings that fix artefacts seen when
  using analog binning with RAW10 mode
- PATCH 5/5:
    - Use special "analog" binning for all resolutions and bitdepths,
      simplifying the binning logic
    - Don't store bin_h/bin_v in imx219 state, instead compute it
      everytime it is needed using the crop and format.
- Link to v3: https://lore.kernel.org/r/20241125-imx219_fixes-v3-0-434fc0b541c8@ideasonboard.com

Changes in v3:
- PATCH 3/3: Calculate binning mode to use instead of hardcoding
  per-resolution
- Link to v2: https://lore.kernel.org/r/20241121-imx219_fixes-v2-0-7b068a60ea40@ideasonboard.com

Changes in v2:
- PATCH 1/3: Add R-By from Jacopo, Dave
- PATCH 2/3:
    - Keep IMX219_PPL_MIN macro value in hex, matching the datasheet
    - Fix prev_hts calculation, by moving it before updating pad format
- PATCH 3/3:
    - Store binning register values in enum binning_mode directly
    - Remove unnecessary pixel_rate variable in imx219_init_controls()
- Link to v1: https://lore.kernel.org/r/20241029-imx219_fixes-v1-0-b45dc3658b4e@ideasonboard.com

---
Dave Stevenson (1):
      media: i2c: imx219: make HBLANK r/w to allow longer exposures

David Plowman (1):
      media: i2c: imx219: Correct the minimum vblanking value

Jai Luthra (3):
      media: i2c: imx219: Rename VTS to FRM_LENGTH
      media: i2c: imx219: Update PLL multipliers
      media: i2c: imx219: Scale the pixel rate for analog binning

 drivers/media/i2c/imx219.c | 196 +++++++++++++++++++++++++++------------------
 1 file changed, 120 insertions(+), 76 deletions(-)
---
base-commit: 40384c840ea1944d7c5a392e8975ed088ecf0b37
change-id: 20241029-imx219_fixes-bfaac4a56200

Best regards,