diff --git a/drivers/media/video/davinci/vpfe_capture.c b/drivers/media/video/davinci/vpfe_capture.c
new file mode 100644
index 0000000..003450b
--- /dev/null
+++ b/drivers/media/video/davinci/vpfe_capture.c
@@ -0,0 +1,2252 @@
+/*
+ * Copyright (C) 2008-2009 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ * Driver name : VPFE Capture driver
+ *    VPFE Capture driver allows applications to capture and stream video
+ *    frames on DaVinci SoCs (DM6446, DM355 etc) from a YUV source such as
+ *    TVP5146 or  Raw Bayer RGB image data from an image sensor
+ *    such as Microns' MT9T001, MT9T031 etc.
+ *
+ *    These SoCs have, in common, a Video Processing Subsystem (VPSS) that
+ *    consists of a Video Processing Front End (VPFE) for capturing
+ *    video/raw image data and Video Processing Back End (VPBE) for displaying
+ *    YUV data through an in-built analog encoder or Digital LCD port. This
+ *    driver is for capture through VPFE. A typical EVM using these SoCs have
+ *    following high level configuration.
+ *
+ *
+ *    decoder(TVP5146/		YUV/
+ * 	     MT9T001)   -->  Raw Bayer RGB ---> MUX -> VPFE (CCDC/ISIF)
+ *    				data input              |      |
+ *							V      |
+ *						      SDRAM    |
+ *							       V
+ *							   Image Processor
+ *							       |
+ *							       V
+ *							     SDRAM
+ *    The data flow happens from a decoder connected to the VPFE over a
+ *    YUV embedded (BT.656/BT.1120) or separate sync or raw bayer rgb interface
+ *    and to the input of VPFE through an optional MUX (if more inputs are
+ *    to be interfaced on the EVM). The input data is first passed through
+ *    CCDC (CCD Controller, a.k.a Image Sensor Interface, ISIF). The CCDC
+ *    does very little or no processing on YUV data and does pre-process Raw
+ *    Bayer RGB data through modules such as Defect Pixel Correction (DFC)
+ *    Color Space Conversion (CSC), data gain/offset etc. After this, data
+ *    can be written to SDRAM or can be connected to the image processing
+ *    block such as IPIPE (on DM355 only).
+ *
+ *    Features supported
+ *  		- MMAP IO
+ *		- Capture using TVP5146 over BT.656
+ *		- support for interfacing decoders using sub device model
+ *		- Work with DM355 or DM6446 CCDC to do Raw Bayer RGB/YUV
+ *		  data capture to SDRAM.
+ *    TODO list
+ *		- Support multiple REQBUF after open
+ *		- Support for de-allocating buffers through REQBUF
+ *		- Support for Raw Bayer RGB capture
+ *		- Support for chaining Image Processor
+ *		- Support for static allocation of buffers
+ *		- Support for USERPTR IO
+ *		- Support for STREAMON before QBUF
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/version.h>
+#include <media/v4l2-common.h>
+#include <linux/io.h>
+#include <media/davinci/vpfe_capture.h>
+#include <media/tvp514x.h>
+#include <linux/i2c.h>
+#include "ccdc_hw_device.h"
+
+static int debug;
+static u32 numbuffers = 3;
+static u32 bufsize = (720 * 576 * 2);
+
+module_param(numbuffers, uint, S_IRUGO);
+module_param(bufsize, uint, S_IRUGO);
+module_param(debug, int, 0644);
+
+MODULE_PARM_DESC(numbuffers, "buffer count (default:3)");
+MODULE_PARM_DESC(bufsize, "buffer size (default:720 x 576 x 2)");
+MODULE_PARM_DESC(debug, "Debug level 0-1");
+
+
+/* standard information */
+struct vpfe_standard {
+	v4l2_std_id std_id;
+	unsigned int width;
+	unsigned int height;
+	struct v4l2_fract pixelaspect;
+	/* 0 - progressive, 1 - interlaced */
+	int frame_format;
+};
+
+/* ccdc configuration */
+struct ccdc_config {
+	/* This make sure vpfe is probed and ready to go */
+	int vpfe_probed;
+	/* name of ccdc device */
+	char name[32];
+	/* for storing mem maps for CCDC */
+	int ccdc_addr_size;
+	void *__iomem ccdc_addr;
+};
+
+/* data structures */
+static struct vpfe_config_params config_params = {
+	.min_numbuffers = 3,
+	.numbuffers = 3,
+	.min_bufsize = 720 * 480 * 2,
+	.device_bufsize = 720 * 576 * 2,
+};
+
+/* ccdc device registered */
+static struct ccdc_hw_device *ccdc_dev;
+/* lock for accessing ccdc information */
+static DEFINE_MUTEX(ccdc_lock);
+/* ccdc configuration */
+static struct ccdc_config *ccdc_cfg;
+
+#define VPFE_PIXELASPECT_NTSC       {11, 10}
+#define VPFE_PIXELASPECT_PAL        {54, 59}
+
+const struct vpfe_standard vpfe_standards[] = {
+	{V4L2_STD_NTSC,	720, 480, VPFE_PIXELASPECT_NTSC, 1},
+	{V4L2_STD_PAL,	720, 576, VPFE_PIXELASPECT_PAL, 1},
+};
+
+/* Used when raw Bayer image from ccdc is directly captured to SDRAM */
+static const struct vpfe_pixel_format vpfe_pix_fmts[] = {
+	{
+		.fmtdesc = {
+			.index = 0,
+			.type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
+			.description = "Bayer GrRBGb 8bit A-Law compr.",
+			.pixelformat = V4L2_PIX_FMT_SBGGR8,
+		},
+		.bpp = 1,
+	},
+	{
+		.fmtdesc = {
+			.index = 1,
+			.type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
+			.description = "Bayer GrRBGb - 16bit",
+			.pixelformat = V4L2_PIX_FMT_SBGGR16,
+		},
+		.bpp = 2,
+	},
+	{
+		.fmtdesc = {
+			.index = 2,
+			.type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
+			.description = "Bayer GrRBGb 8bit DPCM compr.",
+			.pixelformat = V4L2_PIX_FMT_SGRBG10DPCM8,
+		},
+		.bpp = 1,
+	},
+	{
+		.fmtdesc = {
+			.index = 3,
+			.type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
+			.description = "YCbCr 4:2:2 Interleaved UYVY",
+			.pixelformat = V4L2_PIX_FMT_UYVY,
+		},
+		.bpp = 2,
+	},
+	{
+		.fmtdesc = {
+			.index = 4,
+			.type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
+			.description = "YCbCr 4:2:2 Interleaved YUYV",
+			.pixelformat = V4L2_PIX_FMT_YUYV,
+		},
+		.bpp = 2,
+	},
+	{
+		.fmtdesc = {
+			.index = 5,
+			.type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
+			.description = "Y/CbCr 4:2:0 - Semi planar",
+			.pixelformat = V4L2_PIX_FMT_NV12,
+		},
+		.bpp = 1,
+	},
+};
+
+/*
+ * vpfe_lookup_pix_format()
+ * lookup an entry in the vpfe pix format table based on pix_format
+ */
+static const struct vpfe_pixel_format *vpfe_lookup_pix_format(u32 pix_format)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(vpfe_pix_fmts); i++) {
+		if (pix_format == vpfe_pix_fmts[i].fmtdesc.pixelformat)
+			return &vpfe_pix_fmts[i];
+	}
+	return NULL;
+}
+
+/*
+ * vpfe_register_ccdc_device. CCDC module calls this to
+ * register with vpfe capture
+ */
+int vpfe_register_ccdc_device(struct ccdc_hw_device *dev)
+{
+	int ret = 0;
+	printk(KERN_NOTICE "vpfe_register_ccdc_device: %s\n", dev->name);
+
+	BUG_ON(!dev->hw_ops.open);
+	BUG_ON(!dev->hw_ops.enable);
+	BUG_ON(!dev->hw_ops.set_hw_if_params);
+	BUG_ON(!dev->hw_ops.configure);
+	BUG_ON(!dev->hw_ops.set_buftype);
+	BUG_ON(!dev->hw_ops.get_buftype);
+	BUG_ON(!dev->hw_ops.enum_pix);
+	BUG_ON(!dev->hw_ops.set_frame_format);
+	BUG_ON(!dev->hw_ops.get_frame_format);
+	BUG_ON(!dev->hw_ops.get_pixel_format);
+	BUG_ON(!dev->hw_ops.set_pixel_format);
+	BUG_ON(!dev->hw_ops.set_params);
+	BUG_ON(!dev->hw_ops.set_image_window);
+	BUG_ON(!dev->hw_ops.get_image_window);
+	BUG_ON(!dev->hw_ops.get_line_length);
+	BUG_ON(!dev->hw_ops.setfbaddr);
+	BUG_ON(!dev->hw_ops.getfid);
+
+	mutex_lock(&ccdc_lock);
+	if (NULL == ccdc_cfg) {
+		/*
+		 * TODO. Will this ever happen? if so, we need to fix it.
+		 * Proabably we need to add the request to a linked list and
+		 * walk through it during vpfe probe
+		 */
+		printk(KERN_ERR "vpfe capture not initialized\n");
+		ret = -1;
+		goto unlock;
+	}
+
+	if (strcmp(dev->name, ccdc_cfg->name)) {
+		/* ignore this ccdc */
+		ret = -1;
+		goto unlock;
+	}
+
+	if (ccdc_dev) {
+		printk(KERN_ERR "ccdc already registered\n");
+		ret = -1;
+		goto unlock;
+	}
+
+	ccdc_dev = dev;
+	dev->hw_ops.set_ccdc_base(ccdc_cfg->ccdc_addr,
+				  ccdc_cfg->ccdc_addr_size);
+unlock:
+	mutex_unlock(&ccdc_lock);
+	return ret;
+}
+EXPORT_SYMBOL(vpfe_register_ccdc_device);
+
+/*
+ * vpfe_unregister_ccdc_device. CCDC module calls this to
+ * unregister with vpfe capture
+ */
+void vpfe_unregister_ccdc_device(struct ccdc_hw_device *dev)
+{
+	if (NULL == dev) {
+		printk(KERN_ERR "invalid ccdc device ptr\n");
+		return;
+	}
+
+	printk(KERN_NOTICE "vpfe_unregister_ccdc_device, dev->name = %s\n",
+		dev->name);
+
+	if (strcmp(dev->name, ccdc_cfg->name)) {
+		/* ignore this ccdc */
+		return;
+	}
+
+	mutex_lock(&ccdc_lock);
+	ccdc_dev = NULL;
+	mutex_unlock(&ccdc_lock);
+	return;
+}
+EXPORT_SYMBOL(vpfe_unregister_ccdc_device);
+
+/* Set interface params based on client interface */
+static int vpfe_set_hw_if_params(struct vpfe_device *vpfe_dev)
+{
+	struct vpfe_subdev_info *subdev = vpfe_dev->current_subdev;
+	struct v4l2_routing *route =
+		&(subdev->routes[vpfe_dev->current_input]);
+
+	switch (route->output) {
+	case OUTPUT_10BIT_422_EMBEDDED_SYNC:
+		vpfe_dev->vpfe_if_params.if_type = VPFE_BT656;
+		break;
+	case OUTPUT_20BIT_422_SEPERATE_SYNC:
+		vpfe_dev->vpfe_if_params.if_type = VPFE_YCBCR_SYNC_16;
+		break;
+	case OUTPUT_10BIT_422_SEPERATE_SYNC:
+		vpfe_dev->vpfe_if_params.if_type = VPFE_YCBCR_SYNC_8;
+		break;
+	default:
+		v4l2_err(&vpfe_dev->v4l2_dev, "decoder output"
+			" not supported, %d\n", route->output);
+		return -EINVAL;
+	}
+
+	/* set if client specific interface param is available */
+	if (subdev->pdata) {
+		/* each client will have different interface requirements */
+		if (!strcmp(subdev->name, "tvp5146")) {
+			struct tvp514x_platform_data *pdata = subdev->pdata;
+
+			if (pdata->hs_polarity)
+				vpfe_dev->vpfe_if_params.hdpol =
+					VPFE_PINPOL_POSITIVE;
+			else
+				vpfe_dev->vpfe_if_params.hdpol =
+					VPFE_PINPOL_NEGATIVE;
+
+			if (pdata->vs_polarity)
+				vpfe_dev->vpfe_if_params.vdpol =
+					VPFE_PINPOL_POSITIVE;
+			else
+				vpfe_dev->vpfe_if_params.hdpol =
+					VPFE_PINPOL_NEGATIVE;
+		} else {
+			v4l2_err(&vpfe_dev->v4l2_dev, "No interface params"
+				" defined for subdevice, %d\n", route->output);
+			return -EFAULT;
+		}
+	}
+	return ccdc_dev->hw_ops.set_hw_if_params(&vpfe_dev->vpfe_if_params);
+}
+
+/*
+ * vpfe_get_ccdc_image_format - Get image parameters based on CCDC settings
+ */
+static int vpfe_get_ccdc_image_format(struct vpfe_device *vpfe_dev,
+				 struct v4l2_format *f)
+{
+	struct v4l2_rect image_win;
+	enum ccdc_buftype buf_type;
+	enum ccdc_frmfmt frm_fmt;
+
+	memset(f, 0, sizeof(*f));
+	f->type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
+	ccdc_dev->hw_ops.get_image_window(&image_win);
+	f->fmt.pix.width = image_win.width;
+	f->fmt.pix.height = image_win.height;
+	f->fmt.pix.bytesperline = ccdc_dev->hw_ops.get_line_length();
+	f->fmt.pix.sizeimage = f->fmt.pix.bytesperline *
+				f->fmt.pix.height;
+	buf_type = ccdc_dev->hw_ops.get_buftype();
+	f->fmt.pix.pixelformat = ccdc_dev->hw_ops.get_pixel_format();
+	frm_fmt = ccdc_dev->hw_ops.get_frame_format();
+	if (frm_fmt == CCDC_FRMFMT_PROGRESSIVE)
+		f->fmt.pix.field = V4L2_FIELD_NONE;
+	else if (frm_fmt == CCDC_FRMFMT_INTERLACED) {
+		if (buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED)
+			f->fmt.pix.field = V4L2_FIELD_INTERLACED;
+		else if (buf_type == CCDC_BUFTYPE_FLD_SEPARATED)
+			f->fmt.pix.field = V4L2_FIELD_SEQ_TB;
+		else {
+			v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf_type");
+			return -EINVAL;
+		}
+	} else {
+		v4l2_err(&vpfe_dev->v4l2_dev, "Invalid frm_fmt");
+		return -EINVAL;
+	}
+	return 0;
+}
+
+/*
+ * vpfe_config_ccdc_image_format()
+ * For a pix format, configure ccdc to setup the capture
+ */
+static int vpfe_config_ccdc_image_format(struct vpfe_device *vpfe_dev)
+{
+	enum ccdc_frmfmt frm_fmt = CCDC_FRMFMT_INTERLACED;
+	int ret = 0;
+
+	if (ccdc_dev->hw_ops.set_pixel_format(
+			vpfe_dev->fmt.fmt.pix.pixelformat) < 0) {
+		v4l2_err(&vpfe_dev->v4l2_dev,
+			"couldn't set pix format in ccdc\n");
+		return -EINVAL;
+	}
+	/* configure the image window */
+	ccdc_dev->hw_ops.set_image_window(&vpfe_dev->crop);
+
+	switch (vpfe_dev->fmt.fmt.pix.field) {
+	case V4L2_FIELD_INTERLACED:
+		/* do nothing, since it is default */
+		ret = ccdc_dev->hw_ops.set_buftype(
+				CCDC_BUFTYPE_FLD_INTERLEAVED);
+		break;
+	case V4L2_FIELD_NONE:
+		frm_fmt = CCDC_FRMFMT_PROGRESSIVE;
+		/* buffer type only applicable for interlaced scan */
+		break;
+	case V4L2_FIELD_SEQ_TB:
+		ret = ccdc_dev->hw_ops.set_buftype(
+				CCDC_BUFTYPE_FLD_SEPARATED);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* set the frame format */
+	if (!ret)
+		ret = ccdc_dev->hw_ops.set_frame_format(frm_fmt);
+	return ret;
+}
+/*
+ * vpfe_config_image_format()
+ * For a given standard, this functions sets up the default
+ * pix format & crop values in the vpfe device and ccdc.  It first
+ * starts with defaults based values from the standard table.
+ * It then checks if sub device support g_fmt and then override the
+ * values based on that.Sets crop values to match with scan resolution
+ * starting at 0,0. It calls vpfe_config_ccdc_image_format() set the
+ * values in ccdc
+ */
+static int vpfe_config_image_format(struct vpfe_device *vpfe_dev,
+				    const v4l2_std_id *std_id)
+{
+	struct vpfe_subdev_info *sub_dev = vpfe_dev->current_subdev;
+	int i, ret = 0;
+
+	for (i = 0; i < ARRAY_SIZE(vpfe_standards); i++) {
+		if (vpfe_standards[i].std_id == *std_id) {
+			vpfe_dev->std_info.active_pixels =
+					vpfe_standards[i].width;
+			vpfe_dev->std_info.active_lines =
+					vpfe_standards[i].height;
+			vpfe_dev->std_info.frame_format =
+					vpfe_standards[i].frame_format;
+			vpfe_dev->std_index = i;
+			break;
+		}
+	}
+
+	if (i ==  ARRAY_SIZE(vpfe_standards)) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "standard not supported\n");
+		return -EINVAL;
+	}
+
+	vpfe_dev->crop.top = 0;
+	vpfe_dev->crop.left = 0;
+	vpfe_dev->crop.width = vpfe_dev->std_info.active_pixels;
+	vpfe_dev->crop.height = vpfe_dev->std_info.active_lines;
+	vpfe_dev->fmt.fmt.pix.width = vpfe_dev->crop.width;
+	vpfe_dev->fmt.fmt.pix.height = vpfe_dev->crop.height;
+
+	/* first field and frame format based on standard frame format */
+	if (vpfe_dev->std_info.frame_format) {
+		vpfe_dev->fmt.fmt.pix.field = V4L2_FIELD_INTERLACED;
+		/* assume V4L2_PIX_FMT_UYVY as default */
+		vpfe_dev->fmt.fmt.pix.pixelformat = V4L2_PIX_FMT_UYVY;
+	} else {
+		vpfe_dev->fmt.fmt.pix.field = V4L2_FIELD_NONE;
+		/* assume V4L2_PIX_FMT_SBGGR8 */
+		vpfe_dev->fmt.fmt.pix.pixelformat = V4L2_PIX_FMT_SBGGR8;
+	}
+
+	/* if sub device supports g_fmt, override the defaults */
+	ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev,
+			sub_dev->grp_id,
+			video, g_fmt, &vpfe_dev->fmt);
+
+	if (ret && ret != -ENOIOCTLCMD) {
+		v4l2_err(&vpfe_dev->v4l2_dev,
+			"error in getting g_fmt from sub device\n");
+		return ret;
+	}
+
+	/* Sets the values in CCDC */
+	ret = vpfe_config_ccdc_image_format(vpfe_dev);
+	if (ret)
+		return ret;
+
+	/* Update the values of sizeimage and bytesperline */
+	if (!ret) {
+		vpfe_dev->fmt.fmt.pix.bytesperline =
+			ccdc_dev->hw_ops.get_line_length();
+		vpfe_dev->fmt.fmt.pix.sizeimage =
+			vpfe_dev->fmt.fmt.pix.bytesperline *
+			vpfe_dev->fmt.fmt.pix.height;
+	}
+	return ret;
+}
+
+static int vpfe_initialize_device(struct vpfe_device *vpfe_dev)
+{
+	int ret = 0;
+
+	/* set first input of current subdevice as the current input */
+	vpfe_dev->current_input = 0;
+
+	/* set default standard */
+	vpfe_dev->std_index = 0;
+
+	/* Configure the default format information */
+	ret = vpfe_config_image_format(vpfe_dev,
+				&vpfe_standards[vpfe_dev->std_index].std_id);
+	if (ret)
+		return ret;
+
+	/* now open the ccdc device to initialize it */
+	mutex_lock(&ccdc_lock);
+	if (NULL == ccdc_dev) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "ccdc device not registered\n");
+		ret = -ENODEV;
+		goto unlock;
+	}
+
+	if (!try_module_get(ccdc_dev->owner)) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "Couldn't lock ccdc module\n");
+		ret = -ENODEV;
+		goto unlock;
+	}
+	ret = ccdc_dev->hw_ops.open(vpfe_dev->pdev);
+	if (!ret)
+		vpfe_dev->initialized = 1;
+unlock:
+	mutex_unlock(&ccdc_lock);
+	return ret;
+}
+
+/*
+ * vpfe_open : It creates object of file handle structure and
+ * stores it in private_data  member of filepointer
+ */
+static int vpfe_open(struct file *file)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	struct vpfe_fh *fh;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_open\n");
+
+	if (!vpfe_dev->cfg->num_subdevs) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "No decoder registered\n");
+		return -ENODEV;
+	}
+
+	/* Allocate memory for the file handle object */
+	fh = kmalloc(sizeof(struct vpfe_fh), GFP_KERNEL);
+	if (NULL == fh) {
+		v4l2_err(&vpfe_dev->v4l2_dev,
+			"unable to allocate memory for file handle object\n");
+		return -ENOMEM;
+	}
+	/* store pointer to fh in private_data member of file */
+	file->private_data = fh;
+	fh->vpfe_dev = vpfe_dev;
+	mutex_lock(&vpfe_dev->lock);
+	/* If decoder is not initialized. initialize it */
+	if (!vpfe_dev->initialized) {
+		if (vpfe_initialize_device(vpfe_dev)) {
+			mutex_unlock(&vpfe_dev->lock);
+			return -ENODEV;
+		}
+	}
+	/* Increment device usrs counter */
+	vpfe_dev->usrs++;
+	/* Set io_allowed member to false */
+	fh->io_allowed = 0;
+	/* Initialize priority of this instance to default priority */
+	fh->prio = V4L2_PRIORITY_UNSET;
+	v4l2_prio_open(&vpfe_dev->prio, &fh->prio);
+	mutex_unlock(&vpfe_dev->lock);
+	return 0;
+}
+
+static void vpfe_schedule_next_buffer(struct vpfe_device *vpfe_dev)
+{
+	unsigned long addr;
+	vpfe_dev->next_frm = list_entry(vpfe_dev->dma_queue.next,
+					struct videobuf_buffer, queue);
+	list_del(&vpfe_dev->next_frm->queue);
+	vpfe_dev->next_frm->state = VIDEOBUF_ACTIVE;
+	addr = videobuf_to_dma_contig(vpfe_dev->next_frm);
+	ccdc_dev->hw_ops.setfbaddr(addr);
+}
+
+static void vpfe_process_buffer_complete(struct vpfe_device *vpfe_dev)
+{
+	struct timeval timevalue;
+
+	do_gettimeofday(&timevalue);
+	vpfe_dev->cur_frm->ts = timevalue;
+	vpfe_dev->cur_frm->state = VIDEOBUF_DONE;
+	vpfe_dev->cur_frm->size = vpfe_dev->fmt.fmt.pix.sizeimage;
+	wake_up_interruptible(&vpfe_dev->cur_frm->done);
+	vpfe_dev->cur_frm = vpfe_dev->next_frm;
+}
+
+/* ISR for VINT0*/
+static irqreturn_t vpfe_isr(int irq, void *dev_id)
+{
+	struct vpfe_device *vpfe_dev = dev_id;
+	enum v4l2_field field;
+	unsigned long addr;
+	int fid;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "\nStarting vpfe_isr...");
+	field = vpfe_dev->fmt.fmt.pix.field;
+
+	/* if streaming not started, don't do anything */
+	if (!vpfe_dev->started)
+		return IRQ_RETVAL(1);
+
+	/* only for 6446 this will be applicable */
+	if (NULL != ccdc_dev->hw_ops.reset)
+		ccdc_dev->hw_ops.reset();
+
+	if (field == V4L2_FIELD_NONE) {
+		/* handle progressive frame capture */
+		v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev,
+			"frame format is progressive...\n");
+		if (vpfe_dev->cur_frm != vpfe_dev->next_frm)
+			vpfe_process_buffer_complete(vpfe_dev);
+		return IRQ_RETVAL(1);
+	}
+
+	/* interlaced or TB capture check which field we are in hardware */
+	fid = ccdc_dev->hw_ops.getfid();
+
+	/* switch the software maintained field id */
+	vpfe_dev->field_id ^= 1;
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "field id = %x:%x.\n",
+		fid, vpfe_dev->field_id);
+	if (fid == vpfe_dev->field_id) {
+		/* we are in-sync here,continue */
+		if (fid == 0) {
+			/*
+			 * One frame is just being captured. If the next frame
+			 * is available, release the current frame and move on
+			 */
+			if (vpfe_dev->cur_frm != vpfe_dev->next_frm)
+				vpfe_process_buffer_complete(vpfe_dev);
+			/*
+			 * based on whether the two fields are stored
+			 * interleavely or separately in memory, reconfigure
+			 * the CCDC memory address
+			 */
+			if (field == V4L2_FIELD_SEQ_TB) {
+				addr =
+				  videobuf_to_dma_contig(vpfe_dev->cur_frm);
+				addr += vpfe_dev->field_off;
+				ccdc_dev->hw_ops.setfbaddr(addr);
+			}
+			return IRQ_RETVAL(1);
+		}
+		/*
+		 * if one field is just being captured configure
+		 * the next frame get the next frame from the empty
+		 * queue if no frame is available hold on to the
+		 * current buffer
+		 */
+		spin_lock(&vpfe_dev->dma_queue_lock);
+		if (!list_empty(&vpfe_dev->dma_queue) &&
+		    vpfe_dev->cur_frm == vpfe_dev->next_frm)
+			vpfe_schedule_next_buffer(vpfe_dev);
+		spin_unlock(&vpfe_dev->dma_queue_lock);
+	} else if (fid == 0) {
+		/*
+		 * out of sync. Recover from any hardware out-of-sync.
+		 * May loose one frame
+		 */
+		vpfe_dev->field_id = fid;
+	}
+	return IRQ_RETVAL(1);
+}
+
+/* vdint1_isr - isr handler for VINT1 interrupt */
+static irqreturn_t vdint1_isr(int irq, void *dev_id)
+{
+	struct vpfe_device *vpfe_dev = dev_id;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "\nInside vdint1_isr...");
+
+	/* if streaming not started, don't do anything */
+	if (!vpfe_dev->started)
+		return IRQ_RETVAL(1);
+
+	spin_lock(&vpfe_dev->dma_queue_lock);
+	if ((vpfe_dev->fmt.fmt.pix.field == V4L2_FIELD_NONE) &&
+	    !list_empty(&vpfe_dev->dma_queue) &&
+	    vpfe_dev->cur_frm == vpfe_dev->next_frm)
+		vpfe_schedule_next_buffer(vpfe_dev);
+	spin_unlock(&vpfe_dev->dma_queue_lock);
+	return IRQ_RETVAL(1);
+}
+
+static void vpfe_detach_irq(struct vpfe_device *vpfe_dev)
+{
+	enum ccdc_frmfmt frame_format;
+
+	frame_format = ccdc_dev->hw_ops.get_frame_format();
+	if (frame_format == CCDC_FRMFMT_PROGRESSIVE)
+		free_irq(IRQ_VDINT1, vpfe_dev);
+}
+
+static int vpfe_attach_irq(struct vpfe_device *vpfe_dev)
+{
+	enum ccdc_frmfmt frame_format;
+
+	frame_format = ccdc_dev->hw_ops.get_frame_format();
+	if (frame_format == CCDC_FRMFMT_PROGRESSIVE) {
+		return request_irq(vpfe_dev->ccdc_irq1, vdint1_isr,
+				    IRQF_DISABLED, "vpfe_capture1",
+				    vpfe_dev);
+	}
+	return 0;
+}
+
+/* vpfe_stop_ccdc_capture: stop streaming in ccdc/isif */
+static void vpfe_stop_ccdc_capture(struct vpfe_device *vpfe_dev)
+{
+	vpfe_dev->started = 0;
+	ccdc_dev->hw_ops.enable(0);
+	if (ccdc_dev->hw_ops.enable_out_to_sdram)
+		ccdc_dev->hw_ops.enable_out_to_sdram(0);
+}
+
+/*
+ * vpfe_release : This function deletes buffer queue, frees the
+ * buffers and the vpfe file  handle
+ */
+static int vpfe_release(struct file *file)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	struct vpfe_fh *fh = file->private_data;
+	struct vpfe_subdev_info *subdev;
+	int ret;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_release\n");
+
+	/* Get the device lock */
+	mutex_lock(&vpfe_dev->lock);
+	/* if this instance is doing IO */
+	if (fh->io_allowed) {
+		if (vpfe_dev->started) {
+			subdev = vpfe_dev->current_subdev;
+			ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev,
+							 subdev->grp_id,
+							 video, s_stream, 0);
+			if (ret && (ret != -ENOIOCTLCMD))
+				v4l2_err(&vpfe_dev->v4l2_dev,
+				"stream off failed in subdev\n");
+			vpfe_stop_ccdc_capture(vpfe_dev);
+			vpfe_detach_irq(vpfe_dev);
+			videobuf_streamoff(&vpfe_dev->buffer_queue);
+		}
+		vpfe_dev->io_usrs = 0;
+		vpfe_dev->numbuffers = config_params.numbuffers;
+	}
+
+	/* Decrement device usrs counter */
+	vpfe_dev->usrs--;
+	/* Close the priority */
+	v4l2_prio_close(&vpfe_dev->prio, &fh->prio);
+	/* If this is the last file handle */
+	if (!vpfe_dev->usrs) {
+		vpfe_dev->initialized = 0;
+		if (ccdc_dev->hw_ops.close)
+			ccdc_dev->hw_ops.close(vpfe_dev->pdev);
+		module_put(ccdc_dev->owner);
+	}
+	mutex_unlock(&vpfe_dev->lock);
+	file->private_data = NULL;
+	/* Free memory allocated to file handle object */
+	kfree(fh);
+	return 0;
+}
+
+/*
+ * vpfe_mmap : It is used to map kernel space buffers
+ * into user spaces
+ */
+static int vpfe_mmap(struct file *file, struct vm_area_struct *vma)
+{
+	/* Get the device object and file handle object */
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_mmap\n");
+
+	return videobuf_mmap_mapper(&vpfe_dev->buffer_queue, vma);
+}
+
+/*
+ * vpfe_poll: It is used for select/poll system call
+ */
+static unsigned int vpfe_poll(struct file *file, poll_table *wait)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_poll\n");
+
+	if (vpfe_dev->started)
+		return videobuf_poll_stream(file,
+					    &vpfe_dev->buffer_queue, wait);
+	return 0;
+}
+
+/* vpfe capture driver file operations */
+static struct v4l2_file_operations vpfe_fops = {
+	.owner = THIS_MODULE,
+	.open = vpfe_open,
+	.release = vpfe_release,
+	.ioctl = video_ioctl2,
+	.mmap = vpfe_mmap,
+	.poll = vpfe_poll
+};
+
+/*
+ * vpfe_check_format()
+ * This function adjust the input pixel format as per hardware
+ * capabilities and update the same in pixfmt.
+ * Following algorithm used :-
+ *
+ *	If given pixformat is not in the vpfe list of pix formats or not
+ *	supported by the hardware, current value of pixformat in the device
+ *	is used
+ *	If given field is not supported, then current field is used. If field
+ *	is different from current, then it is matched with that from sub device.
+ *	Minimum height is 2 lines for interlaced or tb field and 1 line for
+ *	progressive. Maximum height is clamped to active active lines of scan
+ *	Minimum width is 32 bytes in memory and width is clamped to active
+ *	pixels of scan.
+ *	bytesperline is a multiple of 32.
+ */
+static const struct vpfe_pixel_format *
+	vpfe_check_format(struct vpfe_device *vpfe_dev,
+			  struct v4l2_pix_format *pixfmt)
+{
+	u32 min_height = 1, min_width = 32, max_width, max_height;
+	const struct vpfe_pixel_format *vpfe_pix_fmt;
+	u32 pix;
+	int temp, found;
+
+	vpfe_pix_fmt = vpfe_lookup_pix_format(pixfmt->pixelformat);
+	if (NULL == vpfe_pix_fmt) {
+		/*
+		 * use current pixel format in the vpfe device. We
+		 * will find this pix format in the table
+		 */
+		pixfmt->pixelformat = vpfe_dev->fmt.fmt.pix.pixelformat;
+		vpfe_pix_fmt = vpfe_lookup_pix_format(pixfmt->pixelformat);
+	}
+
+	/* check if hw supports it */
+	temp = 0;
+	found = 0;
+	while (ccdc_dev->hw_ops.enum_pix(&pix, temp) >= 0) {
+		if (vpfe_pix_fmt->fmtdesc.pixelformat == pix) {
+			found = 1;
+			break;
+		}
+		temp++;
+	}
+
+	if (!found) {
+		/* use current pixel format */
+		pixfmt->pixelformat = vpfe_dev->fmt.fmt.pix.pixelformat;
+		/*
+		 * Since this is currently used in the vpfe device, we
+		 * will find this pix format in the table
+		 */
+		vpfe_pix_fmt = vpfe_lookup_pix_format(pixfmt->pixelformat);
+	}
+
+	/* check what field format is supported */
+	if (pixfmt->field == V4L2_FIELD_ANY) {
+		/* if field is any, use current value as default */
+		pixfmt->field = vpfe_dev->fmt.fmt.pix.field;
+	}
+
+	/*
+	 * if field is not same as current field in the vpfe device
+	 * try matching the field with the sub device field
+	 */
+	if (vpfe_dev->fmt.fmt.pix.field != pixfmt->field) {
+		/*
+		 * If field value is not in the supported fields, use current
+		 * field used in the device as default
+		 */
+		switch (pixfmt->field) {
+		case V4L2_FIELD_INTERLACED:
+		case V4L2_FIELD_SEQ_TB:
+			/* if sub device is supporting progressive, use that */
+			if (!vpfe_dev->std_info.frame_format)
+				pixfmt->field = V4L2_FIELD_NONE;
+			break;
+		case V4L2_FIELD_NONE:
+			if (vpfe_dev->std_info.frame_format)
+				pixfmt->field = V4L2_FIELD_INTERLACED;
+			break;
+
+		default:
+			/* use current field as default */
+			pixfmt->field = vpfe_dev->fmt.fmt.pix.field;
+		}
+	}
+
+	/* Now adjust image resolutions supported */
+	if (pixfmt->field == V4L2_FIELD_INTERLACED ||
+	    pixfmt->field == V4L2_FIELD_SEQ_TB)
+		min_height = 2;
+
+	max_width = vpfe_dev->std_info.active_pixels;
+	max_height = vpfe_dev->std_info.active_lines;
+	min_width /= vpfe_pix_fmt->bpp;
+
+	v4l2_info(&vpfe_dev->v4l2_dev, "width = %d, height = %d, bpp = %d\n",
+		  pixfmt->width, pixfmt->height, vpfe_pix_fmt->bpp);
+
+	pixfmt->width = clamp((pixfmt->width), min_width, max_width);
+	pixfmt->height = clamp((pixfmt->height), min_height, max_height);
+
+	/* If interlaced, adjust height to be a multiple of 2 */
+	if (pixfmt->field == V4L2_FIELD_INTERLACED)
+		pixfmt->height &= (~1);
+	/*
+	 * recalculate bytesperline and sizeimage since width
+	 * and height might have changed
+	 */
+	pixfmt->bytesperline = (((pixfmt->width * vpfe_pix_fmt->bpp) + 31)
+				& ~31);
+	if (pixfmt->pixelformat == V4L2_PIX_FMT_NV12)
+		pixfmt->sizeimage =
+			pixfmt->bytesperline * pixfmt->height +
+			((pixfmt->bytesperline * pixfmt->height) >> 1);
+	else
+		pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height;
+
+	v4l2_info(&vpfe_dev->v4l2_dev, "adjusted width = %d, height ="
+		 " %d, bpp = %d, bytesperline = %d, sizeimage = %d\n",
+		 pixfmt->width, pixfmt->height, vpfe_pix_fmt->bpp,
+		 pixfmt->bytesperline, pixfmt->sizeimage);
+	return vpfe_pix_fmt;
+}
+
+static int vpfe_querycap(struct file *file, void  *priv,
+			       struct v4l2_capability *cap)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_querycap\n");
+
+	cap->version = VPFE_CAPTURE_VERSION_CODE;
+	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
+	strlcpy(cap->driver, CAPTURE_DRV_NAME, sizeof(cap->driver));
+	strlcpy(cap->bus_info, "Platform", sizeof(cap->bus_info));
+	strlcpy(cap->card, vpfe_dev->cfg->card_name, sizeof(cap->card));
+	return 0;
+}
+
+static int vpfe_g_fmt_vid_cap(struct file *file, void *priv,
+				struct v4l2_format *fmt)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	int ret = 0;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_fmt_vid_cap\n");
+	/* Fill in the information about format */
+	*fmt = vpfe_dev->fmt;
+	return ret;
+}
+
+static int vpfe_enum_fmt_vid_cap(struct file *file, void  *priv,
+				   struct v4l2_fmtdesc *fmt)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	const struct vpfe_pixel_format *pix_fmt;
+	int temp_index;
+	u32 pix;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_enum_fmt_vid_cap\n");
+
+	if (ccdc_dev->hw_ops.enum_pix(&pix, fmt->index) < 0)
+		return -EINVAL;
+
+	/* Fill in the information about format */
+	pix_fmt = vpfe_lookup_pix_format(pix);
+	if (NULL != pix_fmt) {
+		temp_index = fmt->index;
+		*fmt = pix_fmt->fmtdesc;
+		fmt->index = temp_index;
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static int vpfe_s_fmt_vid_cap(struct file *file, void *priv,
+				struct v4l2_format *fmt)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	const struct vpfe_pixel_format *pix_fmts;
+	int ret = 0;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_fmt_vid_cap\n");
+
+	/* If streaming is started, return error */
+	if (vpfe_dev->started) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "Streaming is started\n");
+		return -EBUSY;
+	}
+
+	/* Check for valid frame format */
+	pix_fmts = vpfe_check_format(vpfe_dev, &fmt->fmt.pix);
+
+	if (NULL == pix_fmts)
+		return -EINVAL;
+
+	/* store the pixel format in the device  object */
+	ret = mutex_lock_interruptible(&vpfe_dev->lock);
+	if (ret)
+		return ret;
+
+	/* First detach any IRQ if currently attached */
+	vpfe_detach_irq(vpfe_dev);
+	vpfe_dev->fmt = *fmt;
+	/* set image capture parameters in the ccdc */
+	ret = vpfe_config_ccdc_image_format(vpfe_dev);
+	mutex_unlock(&vpfe_dev->lock);
+	return ret;
+}
+
+static int vpfe_try_fmt_vid_cap(struct file *file, void *priv,
+				  struct v4l2_format *f)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	const struct vpfe_pixel_format *pix_fmts;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_try_fmt_vid_cap\n");
+
+	pix_fmts = vpfe_check_format(vpfe_dev, &f->fmt.pix);
+	if (NULL == pix_fmts)
+		return -EINVAL;
+	return 0;
+}
+
+/*
+ * vpfe_get_subdev_input_index - Get subdev index and subdev input index for a
+ * given app input index
+ */
+static int vpfe_get_subdev_input_index(struct vpfe_device *vpfe_dev,
+					int *subdev_index,
+					int *subdev_input_index,
+					int app_input_index)
+{
+	struct vpfe_config *cfg = vpfe_dev->cfg;
+	struct vpfe_subdev_info *sub_dev;
+	int i, j = 0;
+
+	for (i = 0; i < cfg->num_subdevs; i++) {
+		sub_dev = &cfg->sub_devs[i];
+		if (app_input_index < (j + sub_dev->num_inputs)) {
+			*subdev_index = i;
+			*subdev_input_index = app_input_index - j;
+			return 0;
+		}
+		j += sub_dev->num_inputs;
+	}
+	return -EINVAL;
+}
+
+/*
+ * vpfe_get_app_input - Get app input index for a given subdev input index
+ * driver stores the input index of the current sub device and translate it
+ * when application request the current input
+ */
+static int vpfe_get_app_input_index(struct vpfe_device *vpfe_dev,
+				    int *app_input_index)
+{
+	struct vpfe_config *cfg = vpfe_dev->cfg;
+	struct vpfe_subdev_info *sub_dev;
+	int i, j = 0;
+
+	for (i = 0; i < cfg->num_subdevs; i++) {
+		sub_dev = &cfg->sub_devs[i];
+		if (!strcmp(sub_dev->name, vpfe_dev->current_subdev->name)) {
+			if (vpfe_dev->current_input >= sub_dev->num_inputs)
+				return -1;
+			*app_input_index = j + vpfe_dev->current_input;
+			return 0;
+		}
+		j += sub_dev->num_inputs;
+	}
+	return -EINVAL;
+}
+
+static int vpfe_enum_input(struct file *file, void *priv,
+				 struct v4l2_input *inp)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	struct vpfe_subdev_info *sub_dev;
+	int subdev, index ;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_enum_input\n");
+
+	if (vpfe_get_subdev_input_index(vpfe_dev,
+					&subdev,
+					&index,
+					inp->index) < 0) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "input information not found"
+			 " for the subdev\n");
+		return -EINVAL;
+	}
+	sub_dev = &vpfe_dev->cfg->sub_devs[subdev];
+	memcpy(inp, &sub_dev->inputs[index],
+		sizeof(struct v4l2_input));
+	return 0;
+}
+
+static int vpfe_g_input(struct file *file, void *priv, unsigned int *index)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_input\n");
+
+	return vpfe_get_app_input_index(vpfe_dev, index);
+}
+
+
+static int vpfe_s_input(struct file *file, void *priv, unsigned int index)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	struct vpfe_subdev_info *sub_dev;
+	int subdev_index, inp_index;
+	struct v4l2_routing *route;
+	u32 input = 0, output = 0;
+	int ret = -EINVAL;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_input\n");
+
+	ret = mutex_lock_interruptible(&vpfe_dev->lock);
+	if (ret)
+		return ret;
+
+	/*
+	 * If streaming is started return device busy
+	 * error
+	 */
+	if (vpfe_dev->started) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "Streaming is on\n");
+		ret = -EBUSY;
+		goto unlock_out;
+	}
+
+	if (vpfe_get_subdev_input_index(vpfe_dev,
+					&subdev_index,
+					&inp_index,
+					index) < 0) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "invalid input index\n");
+		goto unlock_out;
+	}
+
+	sub_dev = &vpfe_dev->cfg->sub_devs[subdev_index];
+	route = &sub_dev->routes[inp_index];
+	if (route && sub_dev->can_route) {
+		input = route->input;
+		output = route->output;
+	}
+
+	ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev,
+					 sub_dev->grp_id,
+					 video, s_routing, input,
+					 output, 0);
+
+	if (ret) {
+		v4l2_err(&vpfe_dev->v4l2_dev,
+			"vpfe_doioctl:error in setting input in decoder \n");
+		ret = -EINVAL;
+		goto unlock_out;
+	}
+	vpfe_dev->current_subdev = sub_dev;
+	vpfe_dev->current_input = index;
+	vpfe_dev->std_index = 0;
+
+	ret = vpfe_set_hw_if_params(vpfe_dev);
+	if (ret)
+		goto unlock_out;
+
+	/* set the default image parameters in the device */
+	ret = vpfe_config_image_format(vpfe_dev,
+				&vpfe_standards[vpfe_dev->std_index].std_id);
+	if (ret)
+		goto unlock_out;
+
+unlock_out:
+	mutex_unlock(&vpfe_dev->lock);
+	return ret;
+}
+
+static int vpfe_querystd(struct file *file, void *priv, v4l2_std_id *std_id)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	struct vpfe_subdev_info *subdev;
+	int ret = 0;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_querystd\n");
+
+	ret = mutex_lock_interruptible(&vpfe_dev->lock);
+	subdev = vpfe_dev->current_subdev;
+	if (ret)
+		return ret;
+	/* Call querystd function of decoder device */
+	ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev,
+					 subdev->grp_id,
+					 video, querystd, std_id);
+	mutex_unlock(&vpfe_dev->lock);
+	return ret;
+}
+
+static int vpfe_s_std(struct file *file, void *priv, v4l2_std_id *std_id)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	struct vpfe_subdev_info *subdev;
+	int ret = 0;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_std\n");
+
+	/* Call decoder driver function to set the standard */
+	ret = mutex_lock_interruptible(&vpfe_dev->lock);
+	if (ret)
+		return ret;
+
+	subdev = vpfe_dev->current_subdev;
+	/* If streaming is started, return device busy error */
+	if (vpfe_dev->started) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "streaming is started\n");
+		ret = -EBUSY;
+		goto unlock_out;
+	}
+
+	ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, subdev->grp_id,
+					 core, s_std, *std_id);
+	if (ret < 0) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "Failed to set standard\n");
+		goto unlock_out;
+	}
+	ret = vpfe_config_image_format(vpfe_dev, std_id);
+
+unlock_out:
+	mutex_unlock(&vpfe_dev->lock);
+	return ret;
+}
+
+static int vpfe_g_std(struct file *file, void *priv, v4l2_std_id *std_id)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_std\n");
+
+	*std_id = vpfe_standards[vpfe_dev->std_index].std_id;
+	return 0;
+}
+/*
+ *  Videobuf operations
+ */
+static int vpfe_videobuf_setup(struct videobuf_queue *vq,
+				unsigned int *count,
+				unsigned int *size)
+{
+	struct vpfe_fh *fh = vq->priv_data;
+	struct vpfe_device *vpfe_dev = fh->vpfe_dev;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_buffer_setup\n");
+	*size = config_params.device_bufsize;
+
+	if (*count < config_params.min_numbuffers)
+		*count = config_params.min_numbuffers;
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev,
+		"count=%d, size=%d\n", *count, *size);
+	return 0;
+}
+
+static int vpfe_videobuf_prepare(struct videobuf_queue *vq,
+				struct videobuf_buffer *vb,
+				enum v4l2_field field)
+{
+	struct vpfe_fh *fh = vq->priv_data;
+	struct vpfe_device *vpfe_dev = fh->vpfe_dev;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_buffer_prepare\n");
+
+	/* If buffer is not initialized, initialize it */
+	if (VIDEOBUF_NEEDS_INIT == vb->state) {
+		vb->width = vpfe_dev->fmt.fmt.pix.width;
+		vb->height = vpfe_dev->fmt.fmt.pix.height;
+		vb->size = vpfe_dev->fmt.fmt.pix.sizeimage;
+		vb->field = field;
+	}
+	vb->state = VIDEOBUF_PREPARED;
+	return 0;
+}
+
+static void vpfe_videobuf_queue(struct videobuf_queue *vq,
+				struct videobuf_buffer *vb)
+{
+	/* Get the file handle object and device object */
+	struct vpfe_fh *fh = vq->priv_data;
+	struct vpfe_device *vpfe_dev = fh->vpfe_dev;
+	unsigned long flags;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_buffer_queue\n");
+
+	/* add the buffer to the DMA queue */
+	spin_lock_irqsave(&vpfe_dev->dma_queue_lock, flags);
+	list_add_tail(&vb->queue, &vpfe_dev->dma_queue);
+	spin_unlock_irqrestore(&vpfe_dev->dma_queue_lock, flags);
+
+	/* Change state of the buffer */
+	vb->state = VIDEOBUF_QUEUED;
+}
+
+static void vpfe_videobuf_release(struct videobuf_queue *vq,
+				  struct videobuf_buffer *vb)
+{
+	struct vpfe_fh *fh = vq->priv_data;
+	struct vpfe_device *vpfe_dev = fh->vpfe_dev;
+	unsigned long flags;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_videobuf_release\n");
+
+	/*
+	 * We need to flush the buffer from the dma queue since
+	 * they are de-allocated
+	 */
+	spin_lock_irqsave(&vpfe_dev->dma_queue_lock, flags);
+	INIT_LIST_HEAD(&vpfe_dev->dma_queue);
+	spin_unlock_irqrestore(&vpfe_dev->dma_queue_lock, flags);
+	videobuf_dma_contig_free(vq, vb);
+	vb->state = VIDEOBUF_NEEDS_INIT;
+}
+
+static struct videobuf_queue_ops vpfe_videobuf_qops = {
+	.buf_setup      = vpfe_videobuf_setup,
+	.buf_prepare    = vpfe_videobuf_prepare,
+	.buf_queue      = vpfe_videobuf_queue,
+	.buf_release    = vpfe_videobuf_release,
+};
+
+/*
+ * vpfe_reqbufs. currently support REQBUF only once opening
+ * the device.
+ */
+static int vpfe_reqbufs(struct file *file, void *priv,
+			struct v4l2_requestbuffers *req_buf)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	struct vpfe_fh *fh = file->private_data;
+	int ret = 0;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_reqbufs\n");
+
+	if (V4L2_BUF_TYPE_VIDEO_CAPTURE != req_buf->type) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buffer type\n");
+		return -EINVAL;
+	}
+
+	if (V4L2_MEMORY_USERPTR == req_buf->memory) {
+		/* we don't support user ptr IO */
+		v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_reqbufs:"
+			 " USERPTR IO not supported>\n");
+		return  -EINVAL;
+	}
+
+	ret = mutex_lock_interruptible(&vpfe_dev->lock);
+	if (ret)
+		return ret;
+
+	if (vpfe_dev->io_usrs != 0) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "Only one IO user allowed\n");
+		ret = -EBUSY;
+		goto unlock_out;
+	}
+
+	vpfe_dev->memory = req_buf->memory;
+	videobuf_queue_dma_contig_init(&vpfe_dev->buffer_queue,
+				&vpfe_videobuf_qops,
+				NULL,
+				&vpfe_dev->irqlock,
+				req_buf->type,
+				vpfe_dev->fmt.fmt.pix.field,
+				sizeof(struct videobuf_buffer),
+				fh);
+
+	fh->io_allowed = 1;
+	vpfe_dev->io_usrs = 1;
+	INIT_LIST_HEAD(&vpfe_dev->dma_queue);
+	ret = videobuf_reqbufs(&vpfe_dev->buffer_queue, req_buf);
+unlock_out:
+	mutex_unlock(&vpfe_dev->lock);
+	return ret;
+}
+
+static int vpfe_querybuf(struct file *file, void *priv,
+			 struct v4l2_buffer *buf)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_querybuf\n");
+
+	if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf->type) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n");
+		return  -EINVAL;
+	}
+
+	if (vpfe_dev->memory != V4L2_MEMORY_MMAP) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "Invalid memory\n");
+		return -EINVAL;
+	}
+	/* Call videobuf_querybuf to get information */
+	return videobuf_querybuf(&vpfe_dev->buffer_queue, buf);
+}
+
+static int vpfe_qbuf(struct file *file, void *priv,
+		     struct v4l2_buffer *p)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	struct vpfe_fh *fh = file->private_data;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_qbuf\n");
+
+	if (V4L2_BUF_TYPE_VIDEO_CAPTURE != p->type) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * If this file handle is not allowed to do IO,
+	 * return error
+	 */
+	if (!fh->io_allowed) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "fh->io_allowed\n");
+		return -EACCES;
+	}
+	return videobuf_qbuf(&vpfe_dev->buffer_queue, p);
+}
+
+static int vpfe_dqbuf(struct file *file, void *priv,
+		      struct v4l2_buffer *buf)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_dqbuf\n");
+
+	if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf->type) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n");
+		return -EINVAL;
+	}
+	return videobuf_dqbuf(&vpfe_dev->buffer_queue,
+				      buf, file->f_flags & O_NONBLOCK);
+}
+
+/*
+ * vpfe_calculate_offsets : This function calculates buffers offset
+ * for top and bottom field
+ */
+static void vpfe_calculate_offsets(struct vpfe_device *vpfe_dev)
+{
+	struct v4l2_rect image_win;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_calculate_offsets\n");
+
+	ccdc_dev->hw_ops.get_image_window(&image_win);
+	vpfe_dev->field_off = image_win.height * image_win.width;
+}
+
+/* vpfe_start_ccdc_capture: start streaming in ccdc/isif */
+static void vpfe_start_ccdc_capture(struct vpfe_device *vpfe_dev)
+{
+	ccdc_dev->hw_ops.enable(1);
+	if (ccdc_dev->hw_ops.enable_out_to_sdram)
+		ccdc_dev->hw_ops.enable_out_to_sdram(1);
+	vpfe_dev->started = 1;
+}
+
+/*
+ * vpfe_streamon. Assume the DMA queue is not empty.
+ * application is expected to call QBUF before calling
+ * this ioctl. If not, driver returns error
+ */
+static int vpfe_streamon(struct file *file, void *priv,
+			 enum v4l2_buf_type buf_type)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	struct vpfe_fh *fh = file->private_data;
+	struct vpfe_subdev_info *subdev;
+	unsigned long addr;
+	int ret = 0;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_streamon\n");
+
+	if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf_type) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n");
+		return -EINVAL;
+	}
+
+	/* If file handle is not allowed IO, return error */
+	if (!fh->io_allowed) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "fh->io_allowed\n");
+		return -EACCES;
+	}
+
+	subdev = vpfe_dev->current_subdev;
+	ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, subdev->grp_id,
+					video, s_stream, 1);
+
+	if (ret && (ret != -ENOIOCTLCMD)) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "stream on failed in subdev\n");
+		return -EINVAL;
+	}
+
+	/* If buffer queue is empty, return error */
+	if (list_empty(&vpfe_dev->buffer_queue.stream)) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "buffer queue is empty\n");
+		return EIO;
+	}
+
+	/* Call videobuf_streamon to start streaming * in videobuf */
+	ret = videobuf_streamon(&vpfe_dev->buffer_queue);
+	if (ret)
+		return ret;
+
+
+	ret = mutex_lock_interruptible(&vpfe_dev->lock);
+	if (ret)
+		goto streamoff;
+	/* Get the next frame from the buffer queue */
+	vpfe_dev->next_frm = list_entry(vpfe_dev->dma_queue.next,
+					struct videobuf_buffer, queue);
+	vpfe_dev->cur_frm = vpfe_dev->next_frm;
+	/* Remove buffer from the buffer queue */
+	list_del(&vpfe_dev->cur_frm->queue);
+	/* Mark state of the current frame to active */
+	vpfe_dev->cur_frm->state = VIDEOBUF_ACTIVE;
+	/* Initialize field_id and started member */
+	vpfe_dev->field_id = 0;
+	addr = videobuf_to_dma_contig(vpfe_dev->cur_frm);
+
+	/* Calculate field offset */
+	vpfe_calculate_offsets(vpfe_dev);
+
+	if (vpfe_attach_irq(vpfe_dev) < 0) {
+		v4l2_err(&vpfe_dev->v4l2_dev,
+			 "Error in attaching interrupt handle\n");
+		ret = -EFAULT;
+		goto unlock_out;
+	}
+	if (ccdc_dev->hw_ops.configure() < 0) {
+		v4l2_err(&vpfe_dev->v4l2_dev,
+			 "Error in configuring ccdc\n");
+		ret = -EINVAL;
+		goto unlock_out;
+	}
+	ccdc_dev->hw_ops.setfbaddr((unsigned long)(addr));
+	vpfe_start_ccdc_capture(vpfe_dev);
+	mutex_unlock(&vpfe_dev->lock);
+	return ret;
+unlock_out:
+	mutex_unlock(&vpfe_dev->lock);
+streamoff:
+	ret = videobuf_streamoff(&vpfe_dev->buffer_queue);
+	return ret;
+}
+
+static int vpfe_streamoff(struct file *file, void *priv,
+			  enum v4l2_buf_type i)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	struct vpfe_fh *fh = file->private_data;
+	struct vpfe_subdev_info *subdev;
+	int ret = 0;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_streamoff\n");
+
+	if (V4L2_BUF_TYPE_VIDEO_CAPTURE != i) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n");
+		return -EINVAL;
+	}
+
+	/* If io is allowed for this file handle, return error */
+	if (!fh->io_allowed) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "fh->io_allowed\n");
+		return -EACCES;
+	}
+
+	/* If streaming is not started, return error */
+	if (!vpfe_dev->started) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "device started\n");
+		return -EINVAL;
+	}
+
+	ret = mutex_lock_interruptible(&vpfe_dev->lock);
+	if (ret)
+		return ret;
+
+	vpfe_stop_ccdc_capture(vpfe_dev);
+	vpfe_detach_irq(vpfe_dev);
+
+	subdev = vpfe_dev->current_subdev;
+	ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, subdev->grp_id,
+					video, s_stream, 0);
+
+	if (ret && (ret != -ENOIOCTLCMD))
+		v4l2_err(&vpfe_dev->v4l2_dev, "stream off failed in subdev\n");
+	ret = videobuf_streamoff(&vpfe_dev->buffer_queue);
+	mutex_unlock(&vpfe_dev->lock);
+	return ret;
+}
+
+static int vpfe_queryctrl(struct file *file, void *priv,
+				struct v4l2_queryctrl *qc)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	struct vpfe_subdev_info *sub_dev = vpfe_dev->current_subdev;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_queryctrl\n");
+
+	if (qc->id >= V4L2_CID_PRIVATE_BASE) {
+		/* It is ccdc CID */
+		if (ccdc_dev->hw_ops.queryctrl)
+			return ccdc_dev->hw_ops.queryctrl(qc);
+	}
+	/* pass it to sub device */
+	return v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sub_dev->grp_id,
+					  core, queryctrl, qc);
+}
+
+static int vpfe_g_ctrl(struct file *file, void *priv,
+			struct v4l2_control *ctrl)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	struct vpfe_subdev_info *sub_dev = vpfe_dev->current_subdev;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_ctrl\n");
+
+	if (ctrl->id >= V4L2_CID_PRIVATE_BASE) {
+		/* It is ccdc CID */
+		if (ccdc_dev->hw_ops.get_control)
+			return ccdc_dev->hw_ops.get_control(ctrl);
+	}
+
+	return v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sub_dev->grp_id,
+					  core, g_ctrl, ctrl);
+}
+
+static int vpfe_s_ctrl(struct file *file, void *priv,
+			     struct v4l2_control *ctrl)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	struct vpfe_subdev_info *sub_dev = vpfe_dev->current_subdev;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_ctrl\n");
+
+	if (ctrl->id >= V4L2_CID_PRIVATE_BASE) {
+		/* It is internal ccdc CID */
+		if (ccdc_dev->hw_ops.set_control)
+			return ccdc_dev->hw_ops.set_control(ctrl);
+	}
+
+	return v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sub_dev->grp_id,
+					  core, s_ctrl, ctrl);
+}
+
+static int vpfe_cropcap(struct file *file, void *priv,
+			      struct v4l2_cropcap *crop)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_cropcap\n");
+
+	if (vpfe_dev->std_index > ARRAY_SIZE(vpfe_standards))
+		return -EINVAL;
+
+	memset(crop, 0, sizeof(struct v4l2_cropcap));
+	crop->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	crop->bounds.width = crop->defrect.width =
+		vpfe_standards[vpfe_dev->std_index].width;
+	crop->bounds.height = crop->defrect.height =
+		vpfe_standards[vpfe_dev->std_index].height;
+	crop->pixelaspect = vpfe_standards[vpfe_dev->std_index].pixelaspect;
+	return 0;
+}
+
+static int vpfe_g_crop(struct file *file, void *priv,
+			     struct v4l2_crop *crop)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_crop\n");
+
+	crop->c = vpfe_dev->crop;
+	return 0;
+}
+
+static int vpfe_s_crop(struct file *file, void *priv,
+			     struct v4l2_crop *crop)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	int ret = 0;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_crop\n");
+
+	if (vpfe_dev->started) {
+		/* make sure streaming is not started */
+		v4l2_err(&vpfe_dev->v4l2_dev,
+			"Cannot change crop when streaming is ON\n");
+		return -EBUSY;
+	}
+
+	ret = mutex_lock_interruptible(&vpfe_dev->lock);
+	if (ret)
+		return ret;
+
+	if (crop->c.top < 0 || crop->c.left < 0) {
+		v4l2_err(&vpfe_dev->v4l2_dev,
+			"doesn't support negative values for top & left\n");
+		ret = -EINVAL;
+		goto unlock_out;
+	}
+
+	/* adjust the width to 16 pixel boundry */
+	crop->c.width = ((crop->c.width + 15) & ~0xf);
+
+	/* make sure parameters are valid */
+	if ((crop->c.left + crop->c.width >
+		vpfe_dev->std_info.active_pixels) ||
+	    (crop->c.top + crop->c.height >
+		vpfe_dev->std_info.active_lines)) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "Error in S_CROP params\n");
+		ret = -EINVAL;
+		goto unlock_out;
+	}
+	ccdc_dev->hw_ops.set_image_window(&crop->c);
+	vpfe_dev->fmt.fmt.pix.width = crop->c.width;
+	vpfe_dev->fmt.fmt.pix.height = crop->c.height;
+	vpfe_dev->fmt.fmt.pix.bytesperline =
+		ccdc_dev->hw_ops.get_line_length();
+	vpfe_dev->fmt.fmt.pix.sizeimage =
+		vpfe_dev->fmt.fmt.pix.bytesperline *
+		vpfe_dev->fmt.fmt.pix.height;
+	vpfe_dev->crop = crop->c;
+unlock_out:
+	mutex_unlock(&vpfe_dev->lock);
+	return ret;
+}
+
+
+static long vpfe_param_handler(struct file *file, void *priv,
+		int cmd, void *param)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	int ret = 0;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_param_handler\n");
+
+	if (vpfe_dev->started) {
+		/* only allowed if streaming is not started */
+		v4l2_err(&vpfe_dev->v4l2_dev, "device already started\n");
+		return -EBUSY;
+	}
+
+	ret = mutex_lock_interruptible(&vpfe_dev->lock);
+	if (ret)
+		return ret;
+
+	switch (cmd) {
+	case VPFE_CMD_S_CCDC_RAW_PARAMS:
+		ret = ccdc_dev->hw_ops.set_params(param);
+		if (ret) {
+			v4l2_err(&vpfe_dev->v4l2_dev,
+				"Error in setting parameters"
+				" in CCDC \n");
+			goto unlock_out;
+		}
+		if (vpfe_get_ccdc_image_format(vpfe_dev, &vpfe_dev->fmt) < 0) {
+			v4l2_err(&vpfe_dev->v4l2_dev,
+				"Invalid image format at CCDC \n");
+			goto unlock_out;
+		}
+		break;
+	default:
+		ret = -EINVAL;
+	}
+unlock_out:
+	mutex_unlock(&vpfe_dev->lock);
+	return ret;
+}
+
+
+/* vpfe capture ioctl operations */
+static const struct v4l2_ioctl_ops vpfe_ioctl_ops = {
+	.vidioc_querycap	 = vpfe_querycap,
+	.vidioc_g_fmt_vid_cap    = vpfe_g_fmt_vid_cap,
+	.vidioc_enum_fmt_vid_cap = vpfe_enum_fmt_vid_cap,
+	.vidioc_s_fmt_vid_cap    = vpfe_s_fmt_vid_cap,
+	.vidioc_try_fmt_vid_cap  = vpfe_try_fmt_vid_cap,
+	.vidioc_enum_input	 = vpfe_enum_input,
+	.vidioc_g_input		 = vpfe_g_input,
+	.vidioc_s_input		 = vpfe_s_input,
+	.vidioc_querystd	 = vpfe_querystd,
+	.vidioc_s_std		 = vpfe_s_std,
+	.vidioc_g_std		 = vpfe_g_std,
+	.vidioc_reqbufs		 = vpfe_reqbufs,
+	.vidioc_querybuf	 = vpfe_querybuf,
+	.vidioc_qbuf		 = vpfe_qbuf,
+	.vidioc_dqbuf		 = vpfe_dqbuf,
+	.vidioc_streamon	 = vpfe_streamon,
+	.vidioc_streamoff	 = vpfe_streamoff,
+	.vidioc_queryctrl	 = vpfe_queryctrl,
+	.vidioc_g_ctrl		 = vpfe_g_ctrl,
+	.vidioc_s_ctrl		 = vpfe_s_ctrl,
+	.vidioc_cropcap		 = vpfe_cropcap,
+	.vidioc_g_crop		 = vpfe_g_crop,
+	.vidioc_s_crop		 = vpfe_s_crop,
+	.vidioc_default		 = vpfe_param_handler,
+};
+
+static struct vpfe_device *vpfe_initialize(void)
+{
+	struct vpfe_device *vpfe_dev;
+
+	/* Default number of buffers should be 3 */
+	if ((numbuffers > 0) &&
+	    (numbuffers < config_params.min_numbuffers))
+		numbuffers = config_params.min_numbuffers;
+
+	/*
+	 * Set buffer size to min buffers size if invalid buffer size is
+	 * given
+	 */
+	if (bufsize < config_params.min_bufsize)
+		bufsize = config_params.min_bufsize;
+
+	config_params.numbuffers = numbuffers;
+
+	if (numbuffers)
+		config_params.device_bufsize = bufsize;
+
+	/* Allocate memory for device objects */
+	vpfe_dev = kzalloc(sizeof(*vpfe_dev), GFP_KERNEL);
+
+	return vpfe_dev;
+}
+
+static void vpfe_disable_clock(struct vpfe_device *vpfe_dev)
+{
+	struct vpfe_config *vpfe_cfg = vpfe_dev->cfg;
+
+	clk_disable(vpfe_cfg->vpssclk);
+	clk_put(vpfe_cfg->vpssclk);
+	clk_disable(vpfe_cfg->slaveclk);
+	clk_put(vpfe_cfg->slaveclk);
+	v4l2_info(vpfe_dev->pdev->driver,
+		 "vpfe vpss master & slave clocks disabled\n");
+}
+
+static int vpfe_enable_clock(struct vpfe_device *vpfe_dev)
+{
+	struct vpfe_config *vpfe_cfg = vpfe_dev->cfg;
+	int ret = -ENOENT;
+
+	vpfe_cfg->vpssclk = clk_get(vpfe_dev->pdev, "vpss_master");
+	if (NULL == vpfe_cfg->vpssclk) {
+		v4l2_err(vpfe_dev->pdev->driver, "No clock defined for"
+			 "vpss_master\n");
+		return ret;
+	}
+
+	if (clk_enable(vpfe_cfg->vpssclk)) {
+		v4l2_err(vpfe_dev->pdev->driver,
+			"vpfe vpss master clock not enabled");
+		goto out;
+	}
+	v4l2_info(vpfe_dev->pdev->driver,
+		 "vpfe vpss master clock enabled\n");
+
+	vpfe_cfg->slaveclk = clk_get(vpfe_dev->pdev, "vpss_slave");
+	if (NULL == vpfe_cfg->slaveclk) {
+		v4l2_err(vpfe_dev->pdev->driver,
+			"No clock defined for vpss slave\n");
+		goto out;
+	}
+
+	if (clk_enable(vpfe_cfg->slaveclk)) {
+		v4l2_err(vpfe_dev->pdev->driver,
+			 "vpfe vpss slave clock not enabled");
+		goto out;
+	}
+	v4l2_info(vpfe_dev->pdev->driver,
+		 "vpfe vpss slave clock enabled\n");
+	return 0;
+out:
+	if (vpfe_cfg->vpssclk)
+		clk_put(vpfe_cfg->vpssclk);
+	if (vpfe_cfg->slaveclk)
+		clk_put(vpfe_cfg->slaveclk);
+
+	return -1;
+}
+
+/*
+ * vpfe_probe : This function creates device entries by register
+ * itself to the V4L2 driver and initializes fields of each
+ * device objects
+ */
+static __init int vpfe_probe(struct platform_device *pdev)
+{
+	struct vpfe_config *vpfe_cfg;
+	struct resource *res1;
+	struct vpfe_device *vpfe_dev;
+	struct i2c_adapter *i2c_adap;
+	struct i2c_client *client;
+	struct video_device *vfd;
+	int ret = -ENOMEM, i, j;
+	int num_subdevs = 0;
+
+	/* Get the pointer to the device object */
+	vpfe_dev = vpfe_initialize();
+
+	if (!vpfe_dev) {
+		v4l2_err(pdev->dev.driver,
+			"Failed to allocate memory for vpfe_dev\n");
+		return ret;
+	}
+
+	vpfe_dev->pdev = &pdev->dev;
+
+	if (NULL == pdev->dev.platform_data) {
+		v4l2_err(pdev->dev.driver, "Unable to get vpfe config\n");
+		ret = -ENOENT;
+		goto probe_free_dev_mem;
+	}
+
+	vpfe_cfg = pdev->dev.platform_data;
+	vpfe_dev->cfg = vpfe_cfg;
+	if (NULL == vpfe_cfg->ccdc ||
+	    NULL == vpfe_cfg->card_name ||
+	    NULL == vpfe_cfg->sub_devs) {
+		v4l2_err(pdev->dev.driver, "null ptr in vpfe_cfg\n");
+		ret = -ENOENT;
+		goto probe_free_dev_mem;
+	}
+
+	/* enable vpss clocks */
+	ret = vpfe_enable_clock(vpfe_dev);
+	if (ret)
+		goto probe_free_dev_mem;
+
+	mutex_lock(&ccdc_lock);
+	/* Allocate memory for ccdc configuration */
+	ccdc_cfg = kmalloc(sizeof(struct ccdc_config), GFP_KERNEL);
+	if (NULL == ccdc_cfg) {
+		v4l2_err(pdev->dev.driver, "Memory allocation failed for"
+			"ccdc_cfg");
+		goto probe_disable_clock;
+	}
+
+	strncpy(ccdc_cfg->name, vpfe_cfg->ccdc, 32);
+	/* Get VINT0 irq resource */
+	res1 = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!res1) {
+		v4l2_err(pdev->dev.driver, "Unable to get interrupt for VINT0");
+		ret = -ENOENT;
+		goto probe_disable_clock;
+	}
+	vpfe_dev->ccdc_irq0 = res1->start;
+
+	/* Get VINT1 irq resource */
+	res1 = platform_get_resource(pdev,
+				IORESOURCE_IRQ, 1);
+	if (!res1) {
+		v4l2_err(pdev->dev.driver, "Unable to get interrupt for VINT1");
+		ret = -ENOENT;
+		goto probe_disable_clock;
+	}
+	vpfe_dev->ccdc_irq1 = res1->start;
+
+	/* Get address base of CCDC */
+	res1 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res1) {
+		v4l2_err(pdev->dev.driver,
+			"Unable to get register address map\n");
+		ret = -ENOENT;
+		goto probe_disable_clock;
+	}
+
+	ccdc_cfg->ccdc_addr_size = res1->end - res1->start + 1;
+	if (!request_mem_region(res1->start, ccdc_cfg->ccdc_addr_size,
+				pdev->dev.driver->name)) {
+		v4l2_err(pdev->dev.driver,
+			"Failed request_mem_region for ccdc base\n");
+		ret = -ENXIO;
+		goto probe_disable_clock;
+	}
+	ccdc_cfg->ccdc_addr = ioremap_nocache(res1->start,
+					     ccdc_cfg->ccdc_addr_size);
+	if (!ccdc_cfg->ccdc_addr) {
+		v4l2_err(pdev->dev.driver, "Unable to ioremap ccdc addr\n");
+		ret = -ENXIO;
+		goto probe_out_release_mem1;
+	}
+
+	ret = request_irq(vpfe_dev->ccdc_irq0, vpfe_isr, IRQF_DISABLED,
+			  "vpfe_capture0", vpfe_dev);
+
+	if (0 != ret) {
+		v4l2_err(pdev->dev.driver, "Unable to request interrupt\n");
+		goto probe_out_unmap1;
+	}
+
+	/* Allocate memory for video device */
+	vfd = video_device_alloc();
+	if (NULL == vfd) {
+		ret = ENOMEM;
+		v4l2_err(pdev->dev.driver,
+			"Unable to alloc video device\n");
+		goto probe_out_release_irq;
+	}
+
+	/* Initialize field of video device */
+	vfd->release		= video_device_release;
+	vfd->current_norm	= V4L2_STD_UNKNOWN;
+	vfd->fops		= &vpfe_fops;
+	vfd->ioctl_ops		= &vpfe_ioctl_ops;
+	vfd->minor		= -1;
+	vfd->tvnorms		= 0;
+	vfd->current_norm	= V4L2_STD_PAL;
+	vfd->v4l2_dev 		= &vpfe_dev->v4l2_dev;
+	snprintf(vfd->name, sizeof(vfd->name),
+		 "%s_V%d.%d.%d",
+		 CAPTURE_DRV_NAME,
+		 (VPFE_CAPTURE_VERSION_CODE >> 16) & 0xff,
+		 (VPFE_CAPTURE_VERSION_CODE >> 8) & 0xff,
+		 (VPFE_CAPTURE_VERSION_CODE) & 0xff);
+	/* Set video_dev to the video device */
+	vpfe_dev->video_dev	= vfd;
+
+	ret = v4l2_device_register(&pdev->dev, &vpfe_dev->v4l2_dev);
+	if (ret) {
+		v4l2_err(pdev->dev.driver,
+			"Unable to register v4l2 device.\n");
+		goto probe_out_video_release;
+	}
+	v4l2_info(&vpfe_dev->v4l2_dev, "v4l2 device registered\n");
+	spin_lock_init(&vpfe_dev->irqlock);
+	spin_lock_init(&vpfe_dev->dma_queue_lock);
+	mutex_init(&vpfe_dev->lock);
+
+	/* Initialize field of the device objects */
+	vpfe_dev->numbuffers = config_params.numbuffers;
+
+	/* Initialize prio member of device object */
+	v4l2_prio_init(&vpfe_dev->prio);
+	/* register video device */
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev,
+		"trying to register vpfe device.\n");
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev,
+		"video_dev=%x\n", (int)&vpfe_dev->video_dev);
+	vpfe_dev->fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	ret = video_register_device(vpfe_dev->video_dev,
+				    VFL_TYPE_GRABBER, -1);
+
+	if (ret) {
+		v4l2_err(pdev->dev.driver,
+			"Unable to register video device.\n");
+		goto probe_out_v4l2_unregister;
+	}
+
+	v4l2_info(&vpfe_dev->v4l2_dev, "video device registered\n");
+	/* set the driver data in platform device */
+	platform_set_drvdata(pdev, vpfe_dev);
+	/* set driver private data */
+	video_set_drvdata(vpfe_dev->video_dev, vpfe_dev);
+	i2c_adap = i2c_get_adapter(1);
+	vpfe_cfg = pdev->dev.platform_data;
+	num_subdevs = vpfe_cfg->num_subdevs;
+	vpfe_dev->sd = kmalloc(sizeof(struct v4l2_subdev *) * num_subdevs,
+				GFP_KERNEL);
+	if (NULL == vpfe_dev->sd) {
+		v4l2_err(&vpfe_dev->v4l2_dev,
+			"unable to allocate memory for subdevice pointers\n");
+		ret = -ENOMEM;
+		goto probe_out_video_unregister;
+	}
+
+	for (i = 0; i < num_subdevs; i++) {
+		struct vpfe_subdev_info *sub_dev = &vpfe_cfg->sub_devs[i];
+		struct v4l2_input *inps;
+
+		list_for_each_entry(client, &i2c_adap->clients, list) {
+			if (!strcmp(client->name, sub_dev->name))
+				break;
+		}
+
+		if (NULL == client) {
+			v4l2_err(&vpfe_dev->v4l2_dev, "No Subdevice found\n");
+			ret =  -ENODEV;
+			goto probe_sd_out;
+		}
+
+		/* Get subdevice data from the client */
+		vpfe_dev->sd[i] = i2c_get_clientdata(client);
+		sub_dev->pdata = client->dev.platform_data;
+		if (NULL == vpfe_dev->sd[i] || NULL == sub_dev->pdata) {
+			v4l2_err(&vpfe_dev->v4l2_dev,
+				"No Subdevice or platform client data\n");
+			ret =  -ENODEV;
+			goto probe_sd_out;
+		}
+
+		vpfe_dev->sd[i]->grp_id = sub_dev->grp_id;
+		ret = v4l2_device_register_subdev(&vpfe_dev->v4l2_dev,
+						  vpfe_dev->sd[i]);
+		if (ret) {
+			ret =  -ENODEV;
+			v4l2_err(&vpfe_dev->v4l2_dev,
+				"Error registering v4l2 sub-device\n");
+			goto probe_sd_out;
+		}
+		v4l2_info(&vpfe_dev->v4l2_dev, "v4l2 sub device %s"
+			  " registered\n", client->name);
+
+		/* update tvnorms from the sub devices */
+		for (j = 0; j < sub_dev->num_inputs; j++) {
+			inps = &sub_dev->inputs[j];
+			vfd->tvnorms |= inps->std;
+		}
+	}
+	/* We have at least one sub device to work with */
+	vpfe_dev->current_subdev = &vpfe_cfg->sub_devs[0];
+	mutex_unlock(&ccdc_lock);
+	return 0;
+
+probe_sd_out:
+	for (j = i; j >= 0; j--)
+		v4l2_device_unregister_subdev(vpfe_dev->sd[j]);
+	kfree(vpfe_dev->sd);
+probe_out_video_unregister:
+	video_unregister_device(vpfe_dev->video_dev);
+probe_out_v4l2_unregister:
+	v4l2_device_unregister(&vpfe_dev->v4l2_dev);
+probe_out_video_release:
+	video_device_release(vpfe_dev->video_dev);
+probe_out_release_irq:
+	free_irq(vpfe_dev->ccdc_irq0, vpfe_dev);
+probe_out_unmap1:
+	iounmap(ccdc_cfg->ccdc_addr);
+probe_out_release_mem1:
+	release_mem_region(res1->start, res1->end - res1->start + 1);
+probe_disable_clock:
+	vpfe_disable_clock(vpfe_dev);
+	mutex_unlock(&ccdc_lock);
+	kfree(ccdc_cfg);
+probe_free_dev_mem:
+	kfree(vpfe_dev);
+	return ret;
+}
+
+/*
+ * vpfe_remove : It un-register device from V4L2 driver
+ */
+static int vpfe_remove(struct platform_device *pdev)
+{
+	struct vpfe_device *vpfe_dev = platform_get_drvdata(pdev);
+	struct resource *res;
+	int j;
+
+	v4l2_info(pdev->dev.driver, "vpfe_remove\n");
+
+	free_irq(vpfe_dev->ccdc_irq0, vpfe_dev);
+	/* Unregister video device */
+	for (j = 0; j < vpfe_dev->cfg->num_subdevs; j++)
+		v4l2_device_unregister_subdev(vpfe_dev->sd[j]);
+	kfree(vpfe_dev->sd);
+	v4l2_device_unregister(&vpfe_dev->v4l2_dev);
+	video_unregister_device(vpfe_dev->video_dev);
+	mutex_lock(&ccdc_lock);
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(res->start, res->end - res->start + 1);
+	iounmap(ccdc_cfg->ccdc_addr);
+	mutex_unlock(&ccdc_lock);
+	vpfe_disable_clock(vpfe_dev);
+	kfree(vpfe_dev);
+	kfree(ccdc_cfg);
+	return 0;
+}
+
+static int
+vpfe_suspend(struct platform_device *dev, pm_message_t state)
+{
+	/* add suspend code here later */
+	return -1;
+}
+
+static int
+vpfe_resume(struct platform_device *dev)
+{
+	/* add resume code here later */
+	return -1;
+}
+
+static struct platform_driver vpfe_driver = {
+	.driver = {
+		.name = CAPTURE_DRV_NAME,
+		.owner = THIS_MODULE,
+	},
+	.probe = vpfe_probe,
+	.remove = __devexit_p(vpfe_remove),
+	.suspend = vpfe_suspend,
+	.resume  = vpfe_resume,
+};
+
+static __init int vpfe_init(void)
+{
+	printk(KERN_NOTICE "vpfe_init\n");
+	/* Register driver to the kernel */
+	return platform_driver_register(&vpfe_driver);
+}
+
+/*
+ * vpfe_cleanup : This function un-registers device driver
+ */
+static void vpfe_cleanup(void)
+{
+	platform_driver_unregister(&vpfe_driver);
+}
+
+module_init(vpfe_init);
+module_exit(vpfe_cleanup);
+MODULE_AUTHOR("Texas Instruments.");
+MODULE_DESCRIPTION("VPFE Video for Linux Capture Driver");
+MODULE_LICENSE("GPL");
diff --git a/include/media/davinci/vpfe_capture.h b/include/media/davinci/vpfe_capture.h
new file mode 100644
index 0000000..c08dc92
--- /dev/null
+++ b/include/media/davinci/vpfe_capture.h
@@ -0,0 +1,183 @@
+/*
+ * Copyright (C) 2008-2009 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef _VPFE_CAPTURE_H
+#define _VPFE_CAPTURE_H
+
+#ifdef __KERNEL__
+
+/* Header files */
+#include <media/v4l2-dev.h>
+#include <linux/videodev2.h>
+#include <linux/clk.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-device.h>
+#include <media/videobuf-dma-contig.h>
+#include <media/davinci/vpfe_types.h>
+
+#define VPFE_CAPTURE_NUM_DECODERS        5
+
+/* Macros */
+#define VPFE_MAJOR_RELEASE              0
+#define VPFE_MINOR_RELEASE              0
+#define VPFE_BUILD                      1
+#define VPFE_CAPTURE_VERSION_CODE       ((VPFE_MAJOR_RELEASE << 16) | \
+					(VPFE_MINOR_RELEASE << 8)  | \
+					VPFE_BUILD)
+
+#define CAPTURE_DRV_NAME		"vpfe-capture"
+
+struct vpfe_pixel_format {
+	struct v4l2_fmtdesc fmtdesc;
+	/* bytes per pixel */
+	int bpp;
+};
+
+struct vpfe_std_info {
+	int active_pixels;
+	int active_lines;
+	/* current frame format */
+	int frame_format;
+};
+
+struct vpfe_subdev_info {
+	/* Sub device name */
+	char name[32];
+	/* Sub device group id */
+	int grp_id;
+	/* Number of inputs supported */
+	int num_inputs;
+	/* inputs available at the sub device */
+	struct v4l2_input *inputs;
+	/* Sub dev routing information for each input */
+	struct v4l2_routing *routes;
+	/* check if sub dev supports routing */
+	int can_route;
+	/* sub device private data */
+	void *pdata;
+};
+
+struct vpfe_config {
+	/* Number of sub devices connected to vpfe */
+	int num_subdevs;
+	/* information about each subdev */
+	struct vpfe_subdev_info *sub_devs;
+	/* evm card info */
+	char *card_name;
+	/* ccdc name */
+	char *ccdc;
+	/* vpfe clock */
+	struct clk *vpssclk;
+	struct clk *slaveclk;
+};
+
+struct vpfe_device {
+	/* V4l2 specific parameters */
+	/* Identifies video device for this channel */
+	struct video_device *video_dev;
+	/* sub devices */
+	struct v4l2_subdev **sd;
+	/* vpfe cfg */
+	struct vpfe_config *cfg;
+	/* V4l2 device */
+	struct v4l2_device v4l2_dev;
+	/* parent device */
+	struct device *pdev;
+	/* Used to keep track of state of the priority */
+	struct v4l2_prio_state prio;
+	/* number of open instances of the channel */
+	u32 usrs;
+	/* Indicates id of the field which is being displayed */
+	u32 field_id;
+	/* flag to indicate whether decoder is initialized */
+	u8 initialized;
+	/* current interface type */
+	struct vpfe_hw_if_param vpfe_if_params;
+	/* ptr to currently selected sub device */
+	struct vpfe_subdev_info *current_subdev;
+	/* current input at the sub device */
+	int current_input;
+	/* Keeps track of the information about the standard */
+	struct vpfe_std_info std_info;
+	/* std index into std table */
+	int std_index;
+	/* CCDC IRQs used when CCDC/ISIF output to SDRAM */
+	unsigned int ccdc_irq0;
+	unsigned int ccdc_irq1;
+	/* number of buffers in fbuffers */
+	u32 numbuffers;
+	/* List of buffer pointers for storing frames */
+	u8 *fbuffers[VIDEO_MAX_FRAME];
+	/* Pointer pointing to current v4l2_buffer */
+	struct videobuf_buffer *cur_frm;
+	/* Pointer pointing to next v4l2_buffer */
+	struct videobuf_buffer *next_frm;
+	/*
+	 * This field keeps track of type of buffer exchange mechanism
+	 * user has selected
+	 */
+	enum v4l2_memory memory;
+	/* Used to store pixel format */
+	struct v4l2_format fmt;
+	/*
+	 * used when IMP is chained to store the crop window which
+	 * is different from the image window
+	 */
+	struct v4l2_rect crop;
+	/* Buffer queue used in video-buf */
+	struct videobuf_queue buffer_queue;
+	/* Queue of filled frames */
+	struct list_head dma_queue;
+	/* Used in video-buf */
+	spinlock_t irqlock;
+	/* IRQ lock for DMA queue */
+	spinlock_t dma_queue_lock;
+	/* lock used to access this structure */
+	struct mutex lock;
+	/* number of users performing IO */
+	u32 io_usrs;
+	/* Indicates whether streaming started */
+	u8 started;
+	/*
+	 * offset where second field starts from the starting of the
+	 * buffer for field seperated YCbCr formats
+	 */
+	u32 field_off;
+};
+
+/* File handle structure */
+struct vpfe_fh {
+	struct vpfe_device *vpfe_dev;
+	/* Indicates whether this file handle is doing IO */
+	u8 io_allowed;
+	/* Used to keep track priority of this instance */
+	enum v4l2_priority prio;
+};
+
+struct vpfe_config_params {
+	u8 min_numbuffers;
+	u8 numbuffers;
+	u32 min_bufsize;
+	u32 device_bufsize;
+};
+
+#endif				/* End of __KERNEL__ */
+/* IOCTLs */
+#define VPFE_CMD_S_CCDC_RAW_PARAMS _IOW('V', BASE_VIDIOC_PRIVATE + 1, \
+					void *)
+#endif				/* _DAVINCI_VPFE_H */
