@@ -42,6 +42,32 @@ MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]");
printk(KERN_DEBUG "%s at %s: " fmt, \
dev->name, __FUNCTION__ , ##args); } while (0)
+int tm6000_i2c_send_byte (struct tm6000_core *dev, unsigned char addr, __u8 reg, char *buf, int len)
+{
+ return tm6000_read_write_usb (dev, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ REQ_16_SET_GET_I2C_WR1_RDN, addr | reg << 8, 0, buf, len);
+}
+
+int tm6000_i2c_recv_byte (struct tm6000_core *dev, unsigned char addr, __u8 reg, char *buf, int len)
+{
+ int rc:
+
+ rc = tm6000_read_write_usb (dev, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ REQ_16_SET_GET_I2C_WR1_RDN, addr | reg << 8, 0, buf, len);
+
+ return rc;
+}
+
+int tm6000_i2c_recv_word (struct tm6000_core *dev, unsigned char addr, __u16 reg, char *buf , int len)
+{
+ int rc;
+
+ rc = tm6000_read_write_usb (dev, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ REQ_14_SET_GET_I2C_WR2_RDN, addr, reg, buf, len);
+
+ return rc;
+}
+
static int tm6000_i2c_xfer(struct i2c_adapter *i2c_adap,
struct i2c_msg msgs[], int num)
{
@@ -76,13 +102,14 @@ static int tm6000_i2c_xfer(struct i2c_adapter *i2c_adap,
i2c_dprintk(2, "; joined to read %s len=%d:",
i == num - 2 ? "stop" : "nonstop",
msgs[i + 1].len);
- rc = tm6000_read_write_usb (dev,
- USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- msgs[i].len == 1 ? REQ_16_SET_GET_I2C_WR1_RDN
- : REQ_14_SET_GET_I2C_WR2_RDN,
- addr | msgs[i].buf[0] << 8,
- msgs[i].len == 1 ? 0 : msgs[i].buf[1],
- msgs[i + 1].buf, msgs[i + 1].len);
+
+ if (msgs[i].len == 1) {
+ rc = tm6000_i2c_recv_byte (dev, addr, msgs[i].buf[0],
+ msgs[i + 1].buf, msgs[i + 1].len);
+ } else {
+ rc = tm6000_i2c_recv_word (dev, addr, msgs[i].buf[0] << 8 | msgs[i].buf[1],
+ msgs[i + 1].buf, msgs[i + 1].len);
+ }
i++;
if ((dev->dev_type == TM6010) && (addr == 0xc2)) {
@@ -97,10 +124,8 @@ static int tm6000_i2c_xfer(struct i2c_adapter *i2c_adap,
if (i2c_debug >= 2)
for (byte = 0; byte < msgs[i].len; byte++)
printk(" %02x", msgs[i].buf[byte]);
- rc = tm6000_read_write_usb(dev,
- USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- REQ_16_SET_GET_I2C_WR1_RDN,
- addr | msgs[i].buf[0] << 8, 0,
+
+ rc = tm6000_i2c_send_byte(dev, addr, msgs[i].buf[0],
msgs[i].buf + 1, msgs[i].len - 1);
if ((dev->dev_type == TM6010) && (addr == 0xc2)) {