@@ -28,6 +28,10 @@ returned by the &VIDIOC-QUERYCAP; ioctl.
Any tuner that supports RDS will set the
<constant>V4L2_TUNER_CAP_RDS</constant> flag in the <structfield>capability</structfield>
field of &v4l2-tuner;.
+If the driver only passes RDS blocks without interpreting the data
+the <constant>V4L2_TUNER_SUB_RDS_BLOCK_IO</constant> flag has to be set. If the
+tuner is capable of handling RDS entities like program identication codes and radio
+text the flag <constant>V4L2_TUNER_SUB_RDS_CONTROLS</constant> should be set.
Whether an RDS signal is present can be detected by looking at
the <structfield>rxsubchans</structfield> field of &v4l2-tuner;: the
<constant>V4L2_TUNER_SUB_RDS</constant> will be set if RDS data was detected.</para>
@@ -40,7 +44,11 @@ Any modulator that supports RDS will set the
<constant>V4L2_TUNER_CAP_RDS</constant> flag in the <structfield>capability</structfield>
field of &v4l2-modulator;.
In order to enable the RDS transmission one must set the <constant>V4L2_TUNER_SUB_RDS</constant>
-bit in the <structfield>txsubchans</structfield> field of &v4l2-modulator;.</para>
+bit in the <structfield>txsubchans</structfield> field of &v4l2-modulator;.
+If the driver only passes RDS blocks without interpreting the data
+the <constant>V4L2_TUNER_SUB_RDS_BLOCK_IO</constant> flag has to be set. If the
+tuner is capable of handling RDS entities like program identication codes and radio
+text the flag <constant>V4L2_TUNER_SUB_RDS_CONTROLS</constant> should be set.</para>
</section>
@@ -51,7 +51,8 @@
<para>Start a hardware frequency seek from the current frequency.
To do this applications initialize the <structfield>tuner</structfield>,
-<structfield>type</structfield>, <structfield>seek_upward</structfield> and
+<structfield>type</structfield>, <structfield>seek_upward</structfield>,
+<structfield>spacing</structfield> and
<structfield>wrap_around</structfield> fields, and zero out the
<structfield>reserved</structfield> array of a &v4l2-hw-freq-seek; and
call the <constant>VIDIOC_S_HW_FREQ_SEEK</constant> ioctl with a pointer
@@ -89,7 +90,12 @@ field and the &v4l2-tuner; <structfield>index</structfield> field.</entry>
</row>
<row>
<entry>__u32</entry>
- <entry><structfield>reserved</structfield>[8]</entry>
+ <entry><structfield>spacing</structfield></entry>
+ <entry>If non-zero, defines the hardware seek resolution in Hz. The driver selects the nearest value that is supported by the device. If spacing is zero a reasonable default value is used.</entry>
+ </row>
+ <row>
+ <entry>__u32</entry>
+ <entry><structfield>reserved</structfield>[7]</entry>
<entry>Reserved for future extensions. Drivers and
applications must set the array to zero.</entry>
</row>