From patchwork Mon Oct 18 12:57:37 2010 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Matti Aaltonen X-Patchwork-Id: 261791 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by demeter1.kernel.org (8.14.4/8.14.3) with ESMTP id o9ICwJlk011595 for ; Mon, 18 Oct 2010 12:58:20 GMT Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754873Ab0JRM6E (ORCPT ); Mon, 18 Oct 2010 08:58:04 -0400 Received: from mgw-sa02.ext.nokia.com ([147.243.1.48]:16479 "EHLO mgw-sa02.nokia.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754838Ab0JRM6B (ORCPT ); Mon, 18 Oct 2010 08:58:01 -0400 Received: from nokia.com (localhost [127.0.0.1]) by mgw-sa02.nokia.com (Switch-3.4.3/Switch-3.4.3) with ESMTP id o9ICvlqW022330; Mon, 18 Oct 2010 15:57:48 +0300 Received: from localhost.localdomain ([masi.nmp.nokia.com [172.22.211.19]]) by mgw-sa02.nokia.com with RELAY id o9ICvbxM022168 ; Mon, 18 Oct 2010 15:57:39 +0300 From: "Matti J. Aaltonen" To: linux-media@vger.kernel.org, mchehab@redhat.com, hverkuil@xs4all.nl Cc: "Matti J. Aaltonen" Subject: [PATCH v13 1/1] Documentation: v4l: Add hw_seek spacing and two TUNER_RDS_CAP flags. Date: Mon, 18 Oct 2010 15:57:37 +0300 Message-Id: <1287406657-18859-2-git-send-email-matti.j.aaltonen@nokia.com> X-Mailer: git-send-email 1.6.1.3 In-Reply-To: <1287406657-18859-1-git-send-email-matti.j.aaltonen@nokia.com> References: <1287406657-18859-1-git-send-email-matti.j.aaltonen@nokia.com> X-Nokia-AV: Clean Sender: linux-media-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org X-Greylist: IP, sender and recipient auto-whitelisted, not delayed by milter-greylist-4.2.3 (demeter1.kernel.org [140.211.167.41]); Mon, 18 Oct 2010 12:58:20 +0000 (UTC) diff --git a/Documentation/DocBook/v4l/dev-rds.xml b/Documentation/DocBook/v4l/dev-rds.xml index 0869d70..5498753 100644 --- a/Documentation/DocBook/v4l/dev-rds.xml +++ b/Documentation/DocBook/v4l/dev-rds.xml @@ -3,15 +3,16 @@ The Radio Data System transmits supplementary information in binary format, for example the station name or travel information, on an inaudible audio subcarrier of a radio program. This -interface is aimed at devices capable of receiving and decoding RDS +interface is aimed at devices capable of receiving and/or transmitting RDS information. For more information see the core RDS standard and the RBDS standard . Note that the RBDS standard as is used in the USA is almost identical -to the RDS standard. Any RDS decoder can also handle RBDS. Only some of the fields -have slightly different meanings. See the RBDS standard for more information. +to the RDS standard. Any RDS decoder/encoder can also handle RBDS. Only some of the +fields have slightly different meanings. See the RBDS standard for more +information. The RBDS standard also specifies support for MMBS (Modified Mobile Search). This is a proprietary format which seems to be discontinued. The RDS interface does not @@ -21,16 +22,26 @@ be needed, then please contact the linux-media mailing list: &v4l-ml;.
Querying Capabilities - Devices supporting the RDS capturing API -set the V4L2_CAP_RDS_CAPTURE flag in + Devices supporting the RDS capturing API set +the V4L2_CAP_RDS_CAPTURE flag in the capabilities field of &v4l2-capability; -returned by the &VIDIOC-QUERYCAP; ioctl. -Any tuner that supports RDS will set the -V4L2_TUNER_CAP_RDS flag in the capability -field of &v4l2-tuner;. -Whether an RDS signal is present can be detected by looking at -the rxsubchans field of &v4l2-tuner;: the -V4L2_TUNER_SUB_RDS will be set if RDS data was detected. +returned by the &VIDIOC-QUERYCAP; ioctl. Any tuner that supports RDS +will set the V4L2_TUNER_CAP_RDS flag in +the capability field of &v4l2-tuner;. If +the driver only passes RDS blocks without interpreting the data +the V4L2_TUNER_SUB_RDS_BLOCK_IO flag has to be +set, see Reading RDS data. +For future use the +flag V4L2_TUNER_SUB_RDS_CONTROLS has also been +defined. However, a driver for a radio tuner with this capability does +not yet exist, so if you are planning to write such a driver the best +way to start would probably be by opening a discussion about it on +the linux-media mailing list: &v4l-ml;. + + Whether an RDS signal is present can be detected by looking +at the rxsubchans field of &v4l2-tuner;: +the V4L2_TUNER_SUB_RDS will be set if RDS data +was detected. Devices supporting the RDS output API set the V4L2_CAP_RDS_OUTPUT flag in @@ -40,16 +51,31 @@ Any modulator that supports RDS will set the V4L2_TUNER_CAP_RDS flag in the capability field of &v4l2-modulator;. In order to enable the RDS transmission one must set the V4L2_TUNER_SUB_RDS -bit in the txsubchans field of &v4l2-modulator;. - +bit in the txsubchans field of &v4l2-modulator;. +If the driver only passes RDS blocks without interpreting the data +the V4L2_TUNER_SUB_RDS_BLOCK_IO flag has to be set. If the +tuner is capable of handling RDS entities like program identification codes and radio +text, the flag V4L2_TUNER_SUB_RDS_CONTROLS should be set, +see Writing RDS data and +FM Transmitter Control Reference.
-
+
Reading RDS data RDS data can be read from the radio device -with the &func-read; function. The data is packed in groups of three bytes, +with the &func-read; function. The data is packed in groups of three bytes. +
+ +
+ Writing RDS data + + RDS data can be written to the radio device +with the &func-write; function. The data is packed in groups of three bytes, as follows: +
+ +
struct <structname>v4l2_rds_data</structname> @@ -152,7 +178,7 @@ as follows: V4L2_RDS_BLOCK_ERROR 0x80 - An incorrectable error occurred. + An uncorrectable error occurred. diff --git a/Documentation/DocBook/v4l/vidioc-s-hw-freq-seek.xml b/Documentation/DocBook/v4l/vidioc-s-hw-freq-seek.xml index 14b3ec7..c30dcc4 100644 --- a/Documentation/DocBook/v4l/vidioc-s-hw-freq-seek.xml +++ b/Documentation/DocBook/v4l/vidioc-s-hw-freq-seek.xml @@ -51,7 +51,8 @@ Start a hardware frequency seek from the current frequency. To do this applications initialize the tuner, -type, seek_upward and +type, seek_upward, +spacing and wrap_around fields, and zero out the reserved array of a &v4l2-hw-freq-seek; and call the VIDIOC_S_HW_FREQ_SEEK ioctl with a pointer @@ -89,7 +90,12 @@ field and the &v4l2-tuner; index field. __u32 - reserved[8] + spacing + If non-zero, defines the hardware seek resolution in Hz. The driver selects the nearest value that is supported by the device. If spacing is zero a reasonable default value is used. + + + __u32 + reserved[7] Reserved for future extensions. Drivers and applications must set the array to zero.