@@ -33,7 +33,7 @@
#include "fimc-core.h"
static struct v4l2_subdev *fimc_subdev_register(struct fimc_dev *fimc,
- struct s3c_fimc_isp_info *isp_info)
+ struct s5p_fimc_isp_info *isp_info)
{
struct i2c_adapter *i2c_adap;
struct fimc_vid_cap *vid_cap = &fimc->vid_cap;
@@ -86,8 +86,8 @@ static void fimc_subdev_unregister(struct fimc_dev *fimc)
static int fimc_subdev_attach(struct fimc_dev *fimc, int index)
{
struct fimc_vid_cap *vid_cap = &fimc->vid_cap;
- struct s3c_platform_fimc *pdata = fimc->pdata;
- struct s3c_fimc_isp_info *isp_info;
+ struct s5p_platform_fimc *pdata = fimc->pdata;
+ struct s5p_fimc_isp_info *isp_info;
struct v4l2_subdev *sd;
int i;
@@ -115,7 +115,7 @@ static int fimc_subdev_attach(struct fimc_dev *fimc, int index)
static int fimc_isp_subdev_init(struct fimc_dev *fimc, int index)
{
- struct s3c_fimc_isp_info *isp_info;
+ struct s5p_fimc_isp_info *isp_info;
int ret;
ret = fimc_subdev_attach(fimc, index);
@@ -222,7 +222,7 @@ static int start_streaming(struct vb2_queue *q)
{
struct fimc_ctx *ctx = q->drv_priv;
struct fimc_dev *fimc = ctx->fimc_dev;
- struct s3c_fimc_isp_info *isp_info;
+ struct s5p_fimc_isp_info *isp_info;
int ret;
ret = v4l2_subdev_call(fimc->vid_cap.sd, video, s_stream, 1);
@@ -571,8 +571,8 @@ static int fimc_cap_enum_input(struct file *file, void *priv,
struct v4l2_input *i)
{
struct fimc_ctx *ctx = priv;
- struct s3c_platform_fimc *pldata = ctx->fimc_dev->pdata;
- struct s3c_fimc_isp_info *isp_info;
+ struct s5p_platform_fimc *pldata = ctx->fimc_dev->pdata;
+ struct s5p_fimc_isp_info *isp_info;
if (i->index >= FIMC_MAX_CAMIF_CLIENTS)
return -EINVAL;
@@ -591,7 +591,7 @@ static int fimc_cap_s_input(struct file *file, void *priv,
{
struct fimc_ctx *ctx = priv;
struct fimc_dev *fimc = ctx->fimc_dev;
- struct s3c_platform_fimc *pdata = fimc->pdata;
+ struct s5p_platform_fimc *pdata = fimc->pdata;
if (fimc_capture_active(ctx->fimc_dev))
return -EBUSY;
@@ -21,7 +21,7 @@
#include <media/v4l2-device.h>
#include <media/v4l2-mem2mem.h>
#include <media/v4l2-mediabus.h>
-#include <media/s3c_fimc.h>
+#include <media/s5p_fimc.h>
#include "regs-fimc.h"
@@ -422,7 +422,7 @@ struct fimc_dev {
spinlock_t slock;
struct mutex lock;
struct platform_device *pdev;
- struct s3c_platform_fimc *pdata;
+ struct s5p_platform_fimc *pdata;
struct samsung_fimc_variant *variant;
int id;
struct clk *clock[NUM_FIMC_CLOCKS];
@@ -584,12 +584,12 @@ void fimc_hw_set_input_addr(struct fimc_dev *fimc, struct fimc_addr *paddr);
void fimc_hw_set_output_addr(struct fimc_dev *fimc, struct fimc_addr *paddr,
int index);
int fimc_hw_set_camera_source(struct fimc_dev *fimc,
- struct s3c_fimc_isp_info *cam);
+ struct s5p_fimc_isp_info *cam);
int fimc_hw_set_camera_offset(struct fimc_dev *fimc, struct fimc_frame *f);
int fimc_hw_set_camera_polarity(struct fimc_dev *fimc,
- struct s3c_fimc_isp_info *cam);
+ struct s5p_fimc_isp_info *cam);
int fimc_hw_set_camera_type(struct fimc_dev *fimc,
- struct s3c_fimc_isp_info *cam);
+ struct s5p_fimc_isp_info *cam);
/* -----------------------------------------------------*/
/* fimc-core.c */
@@ -13,7 +13,7 @@
#include <linux/io.h>
#include <linux/delay.h>
#include <mach/map.h>
-#include <media/s3c_fimc.h>
+#include <media/s5p_fimc.h>
#include "fimc-core.h"
@@ -532,7 +532,7 @@ void fimc_hw_set_output_addr(struct fimc_dev *dev,
}
int fimc_hw_set_camera_polarity(struct fimc_dev *fimc,
- struct s3c_fimc_isp_info *cam)
+ struct s5p_fimc_isp_info *cam)
{
u32 cfg = readl(fimc->regs + S5P_CIGCTRL);
@@ -557,7 +557,7 @@ int fimc_hw_set_camera_polarity(struct fimc_dev *fimc,
}
int fimc_hw_set_camera_source(struct fimc_dev *fimc,
- struct s3c_fimc_isp_info *cam)
+ struct s5p_fimc_isp_info *cam)
{
struct fimc_frame *f = &fimc->vid_cap.ctx->s_frame;
u32 cfg = 0;
@@ -624,7 +624,7 @@ int fimc_hw_set_camera_offset(struct fimc_dev *fimc, struct fimc_frame *f)
}
int fimc_hw_set_camera_type(struct fimc_dev *fimc,
- struct s3c_fimc_isp_info *cam)
+ struct s5p_fimc_isp_info *cam)
{
u32 cfg, tmp;
struct fimc_vid_cap *vid_cap = &fimc->vid_cap;
deleted file mode 100644
@@ -1,60 +0,0 @@
-/*
- * Samsung S5P SoC camera interface driver header
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd
- * Author: Sylwester Nawrocki, <s.nawrocki@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef S3C_FIMC_H_
-#define S3C_FIMC_H_
-
-enum cam_bus_type {
- FIMC_ITU_601 = 1,
- FIMC_ITU_656,
- FIMC_MIPI_CSI2,
- FIMC_LCD_WB, /* FIFO link from LCD mixer */
-};
-
-#define FIMC_CLK_INV_PCLK (1 << 0)
-#define FIMC_CLK_INV_VSYNC (1 << 1)
-#define FIMC_CLK_INV_HREF (1 << 2)
-#define FIMC_CLK_INV_HSYNC (1 << 3)
-
-struct i2c_board_info;
-
-/**
- * struct s3c_fimc_isp_info - image sensor information required for host
- * interace configuration.
- *
- * @board_info: pointer to I2C subdevice's board info
- * @bus_type: determines bus type, MIPI, ITU-R BT.601 etc.
- * @i2c_bus_num: i2c control bus id the sensor is attached to
- * @mux_id: FIMC camera interface multiplexer index (separate for MIPI and ITU)
- * @bus_width: camera data bus width in bits
- * @flags: flags defining bus signals polarity inversion (High by default)
- */
-struct s3c_fimc_isp_info {
- struct i2c_board_info *board_info;
- enum cam_bus_type bus_type;
- u16 i2c_bus_num;
- u16 mux_id;
- u16 bus_width;
- u16 flags;
-};
-
-
-#define FIMC_MAX_CAMIF_CLIENTS 2
-
-/**
- * struct s3c_platform_fimc - camera host interface platform data
- *
- * @isp_info: properties of camera sensor required for host interface setup
- */
-struct s3c_platform_fimc {
- struct s3c_fimc_isp_info *isp_info[FIMC_MAX_CAMIF_CLIENTS];
-};
-#endif /* S3C_FIMC_H_ */
new file mode 100644
@@ -0,0 +1,60 @@
+/*
+ * Samsung S5P SoC camera interface driver header
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd
+ * Author: Sylwester Nawrocki, <s.nawrocki@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef S5P_FIMC_H_
+#define S5P_FIMC_H_
+
+enum cam_bus_type {
+ FIMC_ITU_601 = 1,
+ FIMC_ITU_656,
+ FIMC_MIPI_CSI2,
+ FIMC_LCD_WB, /* FIFO link from LCD mixer */
+};
+
+#define FIMC_CLK_INV_PCLK (1 << 0)
+#define FIMC_CLK_INV_VSYNC (1 << 1)
+#define FIMC_CLK_INV_HREF (1 << 2)
+#define FIMC_CLK_INV_HSYNC (1 << 3)
+
+struct i2c_board_info;
+
+/**
+ * struct s5p_fimc_isp_info - image sensor information required for host
+ * interace configuration.
+ *
+ * @board_info: pointer to I2C subdevice's board info
+ * @bus_type: determines bus type, MIPI, ITU-R BT.601 etc.
+ * @i2c_bus_num: i2c control bus id the sensor is attached to
+ * @mux_id: FIMC camera interface multiplexer index (separate for MIPI and ITU)
+ * @bus_width: camera data bus width in bits
+ * @flags: flags defining bus signals polarity inversion (High by default)
+ */
+struct s5p_fimc_isp_info {
+ struct i2c_board_info *board_info;
+ enum cam_bus_type bus_type;
+ u16 i2c_bus_num;
+ u16 mux_id;
+ u16 bus_width;
+ u16 flags;
+};
+
+
+#define FIMC_MAX_CAMIF_CLIENTS 2
+
+/**
+ * struct s5p_platform_fimc - camera host interface platform data
+ *
+ * @isp_info: properties of camera sensor required for host interface setup
+ */
+struct s5p_platform_fimc {
+ struct s5p_fimc_isp_info *isp_info[FIMC_MAX_CAMIF_CLIENTS];
+};
+#endif /* S5P_FIMC_H_ */