From patchwork Tue Jan 18 22:32:16 2011 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Martin Hostettler X-Patchwork-Id: 487691 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by demeter1.kernel.org (8.14.4/8.14.3) with ESMTP id p0IMWtfj003899 for ; Tue, 18 Jan 2011 22:32:55 GMT Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752708Ab1ARWcc (ORCPT ); Tue, 18 Jan 2011 17:32:32 -0500 Received: from moutng.kundenserver.de ([212.227.17.9]:61393 "EHLO moutng.kundenserver.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752143Ab1ARWcb (ORCPT ); Tue, 18 Jan 2011 17:32:31 -0500 Received: from localhost (dslb-084-063-098-161.pools.arcor-ip.net [84.63.98.161]) by mrelayeu.kundenserver.de (node=mrbap0) with ESMTP (Nemesis) id 0MDn2s-1PShIj3Veg-00H3ww; Tue, 18 Jan 2011 23:32:28 +0100 From: Martin Hostettler To: Laurent Pinchart , Tony Lindgren , linux-omap@vger.kernel.org Cc: linux-media@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Martin Hostettler Subject: [PATCH RFC] arm: omap3evm: Add support for an MT9M032 based camera board. Date: Tue, 18 Jan 2011 23:32:16 +0100 Message-Id: <1295389936-3238-1-git-send-email-martin@neutronstar.dyndns.org> X-Mailer: git-send-email 1.7.1 X-Provags-ID: V02:K0:FXao4jE2x6BWyafTcrt14wPGZWef8yH0aaP1Q2xoZFW XxUBz5Iw3jPWnK5KxrqxZMsrr5KRL4Uf6gLs3HsClQxZ3S5e2/ EOnAQTJBZjrzoVaFGJ4DkxfcqXaR2on8i+AadFgC49iPkTBInr xf9cCqf/QsPfjrjlFUxIIPd571FVmUwADu0gcJKgu4oWHKZs0o +0JLMmmlXdpEI3lDExT8ut1Ohj6KPsddjctghs4wcg= Sender: linux-media-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org X-Greylist: IP, sender and recipient auto-whitelisted, not delayed by milter-greylist-4.2.6 (demeter1.kernel.org [140.211.167.41]); Tue, 18 Jan 2011 22:32:56 +0000 (UTC) diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 60e51bc..5f43cc5 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -132,6 +132,7 @@ obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o \ obj-$(CONFIG_MACH_OVERO) += board-overo.o \ hsmmc.o obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o \ + board-omap3evm-camera.o \ hsmmc.o obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o \ hsmmc.o diff --git a/arch/arm/mach-omap2/board-omap3evm-camera.c b/arch/arm/mach-omap2/board-omap3evm-camera.c new file mode 100644 index 0000000..ea82a49 --- /dev/null +++ b/arch/arm/mach-omap2/board-omap3evm-camera.c @@ -0,0 +1,177 @@ +/* + * Copyright (C) 2010-2011 Lund Engineering + * Contact: Gil Lund + * Author: Martin Hostettler + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include +#include +#include + +#include +#include +#include "mux.h" + +#include "../../../drivers/media/video/isp/isp.h" +#include "../../../drivers/media/video/mt9m032.h" + +#include "devices.h" + +#define EVM_TWL_GPIO_BASE OMAP_MAX_GPIO_LINES +#define GPIO98_VID_DEC_RES 98 +#define nCAM_VD_SEL 157 + +#define MT9M032_I2C_BUS_NUM 2 + + +enum omap3evmdc_mux { + MUX_TVP5146, + MUX_CAMERA_SENSOR, + MUX_EXP_CAMERA_SENSOR, +}; + +/** + * omap3evm_set_mux - Sets mux to enable signal routing to + * different peripherals present on new EVM board + * @mux_id: enum, mux id to enable + * + * Returns 0 for success or a negative error code + */ +static int omap3evm_set_mux(enum omap3evmdc_mux mux_id) +{ + /* Set GPIO6 = 1 */ + gpio_set_value_cansleep(EVM_TWL_GPIO_BASE + 6, 1); + gpio_set_value_cansleep(EVM_TWL_GPIO_BASE + 2, 0); + + switch (mux_id) { + case MUX_TVP5146: + gpio_set_value_cansleep(EVM_TWL_GPIO_BASE + 2, 0); + gpio_set_value(nCAM_VD_SEL, 1); + break; + + case MUX_CAMERA_SENSOR: + gpio_set_value_cansleep(EVM_TWL_GPIO_BASE + 2, 0); + gpio_set_value(nCAM_VD_SEL, 0); + break; + + case MUX_EXP_CAMERA_SENSOR: + gpio_set_value_cansleep(EVM_TWL_GPIO_BASE + 2, 1); + break; + + default: + pr_err("omap3evm-camera: Invalid mux id #%d\n", mux_id); + return -EINVAL; + } + + return 0; +} + +static struct mt9m032_platform_data mt9m032_platform_data = { + .ext_clock = 13500000, + .pll_pre_div = 6, + .pll_mul = 120, + .pll_out_div = 5, + .invert_pixclock = 1, +}; + +static struct i2c_board_info camera_i2c_devices[] = { + { + I2C_BOARD_INFO(MT9M032_NAME, MT9M032_I2C_ADDR), + .platform_data = &mt9m032_platform_data, + }, +}; + +static struct isp_subdev_i2c_board_info camera_i2c_subdevs[] = { + { + .board_info = &camera_i2c_devices[0], + .i2c_adapter_id = MT9M032_I2C_BUS_NUM, + }, + {}, +}; + +static struct isp_v4l2_subdevs_group camera_subdevs[] = { + { + .subdevs = camera_i2c_subdevs, + .interface = ISP_INTERFACE_PARALLEL, + .bus = { + .parallel = { + .data_lane_shift = 1, + .clk_pol = 0, + .bridge = ISPCTRL_PAR_BRIDGE_DISABLE, + .width = 8, + } + }, + }, + {}, +}; + +static struct isp_platform_data isp_platform_data = { + .subdevs = camera_subdevs, +}; + +static int __init camera_init(void) +{ + omap_mux_init_gpio(nCAM_VD_SEL, OMAP_PIN_OUTPUT); + if (gpio_request(nCAM_VD_SEL, "nCAM_VD_SEL") < 0) { + pr_err("omap3evm-camera: Failed to get GPIO nCAM_VD_SEL(%d)\n", + nCAM_VD_SEL); + goto err; + } + if (gpio_direction_output(nCAM_VD_SEL, 1) < 0) { + pr_err("omap3evm-camera: Failed to set GPIO nCAM_VD_SEL(%d) direction\n", + nCAM_VD_SEL); + goto err_vdsel; + } + + if (gpio_request(EVM_TWL_GPIO_BASE + 2, "T2_GPIO2") < 0) { + pr_err("omap3evm-camera: Failed to get GPIO T2_GPIO2(%d)\n", + EVM_TWL_GPIO_BASE + 2); + goto err_vdsel; + } + if (gpio_direction_output(EVM_TWL_GPIO_BASE + 2, 0) < 0) { + pr_err("omap3evm-camera: Failed to set GPIO T2_GPIO2(%d) direction\n", + EVM_TWL_GPIO_BASE + 2); + goto err_2; + } + + if (gpio_request(EVM_TWL_GPIO_BASE + 8, "nCAM_VD_EN") < 0) { + pr_err("omap3evm-camera: Failed to get GPIO nCAM_VD_EN(%d)\n", + EVM_TWL_GPIO_BASE + 8); + goto err_2; + } + if (gpio_direction_output(EVM_TWL_GPIO_BASE + 8, 0) < 0) { + pr_err("omap3evm-camera: Failed to set GPIO nCAM_VD_EN(%d) direction\n", + EVM_TWL_GPIO_BASE + 8); + goto err_8; + } + + omap3evm_set_mux(MUX_CAMERA_SENSOR); + + + return omap3_init_camera(&isp_platform_data); + +err_8: + gpio_free(EVM_TWL_GPIO_BASE + 8); +err_2: + gpio_free(EVM_TWL_GPIO_BASE + 2); +err_vdsel: + gpio_free(nCAM_VD_SEL); +err: + return -EINVAL; +} + +device_initcall(camera_init);