@@ -419,52 +419,6 @@ static int ov6650_s_stream(struct v4l2_subdev *sd, int enable)
return 0;
}
-/* Alter bus settings on camera side */
-static int ov6650_set_bus_param(struct soc_camera_device *icd,
- unsigned long flags)
-{
- struct soc_camera_link *icl = to_soc_camera_link(icd);
- struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
- int ret;
-
- flags = soc_camera_apply_sensor_flags(icl, flags);
-
- if (flags & SOCAM_PCLK_SAMPLE_RISING)
- ret = ov6650_reg_rmw(client, REG_COMJ, COMJ_PCLK_RISING, 0);
- else
- ret = ov6650_reg_rmw(client, REG_COMJ, 0, COMJ_PCLK_RISING);
- if (ret)
- return ret;
-
- if (flags & SOCAM_HSYNC_ACTIVE_LOW)
- ret = ov6650_reg_rmw(client, REG_COMF, COMF_HREF_LOW, 0);
- else
- ret = ov6650_reg_rmw(client, REG_COMF, 0, COMF_HREF_LOW);
- if (ret)
- return ret;
-
- if (flags & SOCAM_VSYNC_ACTIVE_HIGH)
- ret = ov6650_reg_rmw(client, REG_COMJ, COMJ_VSYNC_HIGH, 0);
- else
- ret = ov6650_reg_rmw(client, REG_COMJ, 0, COMJ_VSYNC_HIGH);
-
- return ret;
-}
-
-/* Request bus settings on camera side */
-static unsigned long ov6650_query_bus_param(struct soc_camera_device *icd)
-{
- struct soc_camera_link *icl = to_soc_camera_link(icd);
-
- unsigned long flags = SOCAM_MASTER |
- SOCAM_PCLK_SAMPLE_RISING | SOCAM_PCLK_SAMPLE_FALLING |
- SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_HSYNC_ACTIVE_LOW |
- SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_LOW |
- SOCAM_DATA_ACTIVE_HIGH | SOCAM_DATAWIDTH_8;
-
- return soc_camera_apply_sensor_flags(icl, flags);
-}
-
/* Get status of additional camera capabilities */
static int ov6650_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
{
@@ -1095,8 +1049,6 @@ static int ov6650_video_probe(struct soc_camera_device *icd,
}
static struct soc_camera_ops ov6650_ops = {
- .set_bus_param = ov6650_set_bus_param,
- .query_bus_param = ov6650_query_bus_param,
.controls = ov6650_controls,
.num_controls = ARRAY_SIZE(ov6650_controls),
};
@@ -1111,6 +1063,7 @@ static struct v4l2_subdev_core_ops ov6650_core_ops = {
#endif
};
+/* Request bus settings on camera side */
static int ov6650_g_mbus_config(struct v4l2_subdev *sd,
struct v4l2_mbus_config *cfg)
{
@@ -1129,6 +1082,7 @@ static int ov6650_g_mbus_config(struct v4l2_subdev *sd,
return 0;
}
+/* Alter bus settings on camera side */
static int ov6650_s_mbus_config(struct v4l2_subdev *sd,
const struct v4l2_mbus_config *cfg)
{
Now that all soc-camera hosts have been ported to use V4L2 subdevice mediabus-config operations and soc-camera client bus-parameter operations have been made optional, they can be removed. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> --- drivers/media/video/ov6650.c | 50 +---------------------------------------- 1 files changed, 2 insertions(+), 48 deletions(-)