@@ -18,6 +18,7 @@
#include <media/soc_mediabus.h>
#include <media/v4l2-subdev.h>
#include <media/v4l2-chip-ident.h>
+#include <media/v4l2-ctrls.h>
/*
* mt9v022 i2c address 0x48, 0x4c, 0x58, 0x5c
@@ -101,6 +102,17 @@ static const struct mt9v022_datafmt mt9v022_monochrome_fmts[] = {
struct mt9v022 {
struct v4l2_subdev subdev;
+ struct v4l2_ctrl_handler hdl;
+ struct {
+ /* exposure/auto-exposure cluster */
+ struct v4l2_ctrl *autoexposure;
+ struct v4l2_ctrl *exposure;
+ };
+ struct {
+ /* gain/auto-gain cluster */
+ struct v4l2_ctrl *autogain;
+ struct v4l2_ctrl *gain;
+ };
struct v4l2_rect rect; /* Sensor window */
const struct mt9v022_datafmt *fmt;
const struct mt9v022_datafmt *fmts;
@@ -179,6 +191,8 @@ static int mt9v022_init(struct i2c_client *client)
ret = reg_clear(client, MT9V022_BLACK_LEVEL_CALIB_CTRL, 1);
if (!ret)
ret = reg_write(client, MT9V022_DIGITAL_TEST_PATTERN, 0);
+ if (!ret)
+ return v4l2_ctrl_handler_setup(&mt9v022->hdl);
return ret;
}
@@ -431,215 +445,117 @@ static int mt9v022_s_register(struct v4l2_subdev *sd,
}
#endif
-static const struct v4l2_queryctrl mt9v022_controls[] = {
- {
- .id = V4L2_CID_VFLIP,
- .type = V4L2_CTRL_TYPE_BOOLEAN,
- .name = "Flip Vertically",
- .minimum = 0,
- .maximum = 1,
- .step = 1,
- .default_value = 0,
- }, {
- .id = V4L2_CID_HFLIP,
- .type = V4L2_CTRL_TYPE_BOOLEAN,
- .name = "Flip Horizontally",
- .minimum = 0,
- .maximum = 1,
- .step = 1,
- .default_value = 0,
- }, {
- .id = V4L2_CID_GAIN,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "Analog Gain",
- .minimum = 64,
- .maximum = 127,
- .step = 1,
- .default_value = 64,
- .flags = V4L2_CTRL_FLAG_SLIDER,
- }, {
- .id = V4L2_CID_EXPOSURE,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "Exposure",
- .minimum = 1,
- .maximum = 255,
- .step = 1,
- .default_value = 255,
- .flags = V4L2_CTRL_FLAG_SLIDER,
- }, {
- .id = V4L2_CID_AUTOGAIN,
- .type = V4L2_CTRL_TYPE_BOOLEAN,
- .name = "Automatic Gain",
- .minimum = 0,
- .maximum = 1,
- .step = 1,
- .default_value = 1,
- }, {
- .id = V4L2_CID_EXPOSURE_AUTO,
- .type = V4L2_CTRL_TYPE_BOOLEAN,
- .name = "Automatic Exposure",
- .minimum = 0,
- .maximum = 1,
- .step = 1,
- .default_value = 1,
- }
-};
-
-static struct soc_camera_ops mt9v022_ops = {
- .controls = mt9v022_controls,
- .num_controls = ARRAY_SIZE(mt9v022_controls),
-};
-
-static int mt9v022_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int mt9v022_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
{
+ struct mt9v022 *mt9v022 = container_of(ctrl->handler,
+ struct mt9v022, hdl);
+ struct v4l2_subdev *sd = &mt9v022->subdev;
struct i2c_client *client = v4l2_get_subdevdata(sd);
- const struct v4l2_queryctrl *qctrl;
+ struct v4l2_ctrl *gain = mt9v022->gain;
+ struct v4l2_ctrl *exp = mt9v022->exposure;
unsigned long range;
int data;
- qctrl = soc_camera_find_qctrl(&mt9v022_ops, ctrl->id);
-
switch (ctrl->id) {
- case V4L2_CID_VFLIP:
- data = reg_read(client, MT9V022_READ_MODE);
- if (data < 0)
- return -EIO;
- ctrl->value = !!(data & 0x10);
- break;
- case V4L2_CID_HFLIP:
- data = reg_read(client, MT9V022_READ_MODE);
- if (data < 0)
- return -EIO;
- ctrl->value = !!(data & 0x20);
- break;
- case V4L2_CID_EXPOSURE_AUTO:
- data = reg_read(client, MT9V022_AEC_AGC_ENABLE);
- if (data < 0)
- return -EIO;
- ctrl->value = !!(data & 0x1);
- break;
case V4L2_CID_AUTOGAIN:
- data = reg_read(client, MT9V022_AEC_AGC_ENABLE);
- if (data < 0)
- return -EIO;
- ctrl->value = !!(data & 0x2);
- break;
- case V4L2_CID_GAIN:
data = reg_read(client, MT9V022_ANALOG_GAIN);
if (data < 0)
return -EIO;
- range = qctrl->maximum - qctrl->minimum;
- ctrl->value = ((data - 16) * range + 24) / 48 + qctrl->minimum;
-
- break;
- case V4L2_CID_EXPOSURE:
+ range = gain->maximum - gain->minimum;
+ gain->val = ((data - 16) * range + 24) / 48 + gain->minimum;
+ return 0;
+ case V4L2_CID_EXPOSURE_AUTO:
data = reg_read(client, MT9V022_TOTAL_SHUTTER_WIDTH);
if (data < 0)
return -EIO;
- range = qctrl->maximum - qctrl->minimum;
- ctrl->value = ((data - 1) * range + 239) / 479 + qctrl->minimum;
-
- break;
+ range = exp->maximum - exp->minimum;
+ exp->val = ((data - 1) * range + 239) / 479 + exp->minimum;
+ return 0;
}
- return 0;
+ return -EINVAL;
}
-static int mt9v022_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int mt9v022_s_ctrl(struct v4l2_ctrl *ctrl)
{
- int data;
+ struct mt9v022 *mt9v022 = container_of(ctrl->handler,
+ struct mt9v022, hdl);
+ struct v4l2_subdev *sd = &mt9v022->subdev;
struct i2c_client *client = v4l2_get_subdevdata(sd);
- const struct v4l2_queryctrl *qctrl;
-
- qctrl = soc_camera_find_qctrl(&mt9v022_ops, ctrl->id);
- if (!qctrl)
- return -EINVAL;
+ int data;
switch (ctrl->id) {
case V4L2_CID_VFLIP:
- if (ctrl->value)
+ if (ctrl->val)
data = reg_set(client, MT9V022_READ_MODE, 0x10);
else
data = reg_clear(client, MT9V022_READ_MODE, 0x10);
if (data < 0)
return -EIO;
- break;
+ return 0;
case V4L2_CID_HFLIP:
- if (ctrl->value)
+ if (ctrl->val)
data = reg_set(client, MT9V022_READ_MODE, 0x20);
else
data = reg_clear(client, MT9V022_READ_MODE, 0x20);
if (data < 0)
return -EIO;
- break;
- case V4L2_CID_GAIN:
- /* mt9v022 has minimum == default */
- if (ctrl->value > qctrl->maximum || ctrl->value < qctrl->minimum)
- return -EINVAL;
- else {
- unsigned long range = qctrl->maximum - qctrl->minimum;
+ return 0;
+ case V4L2_CID_AUTOGAIN:
+ if (ctrl->val) {
+ if (reg_set(client, MT9V022_AEC_AGC_ENABLE, 0x2) < 0)
+ return -EIO;
+ } else {
+ struct v4l2_ctrl *gain = mt9v022->gain;
+ /* mt9v022 has minimum == default */
+ unsigned long range = gain->maximum - gain->minimum;
/* Valid values 16 to 64, 32 to 64 must be even. */
- unsigned long gain = ((ctrl->value - qctrl->minimum) *
+ unsigned long gain_val = ((gain->val - gain->minimum) *
48 + range / 2) / range + 16;
- if (gain >= 32)
- gain &= ~1;
+
+ if (gain_val >= 32)
+ gain_val &= ~1;
+
/*
* The user wants to set gain manually, hope, she
* knows, what she's doing... Switch AGC off.
*/
-
if (reg_clear(client, MT9V022_AEC_AGC_ENABLE, 0x2) < 0)
return -EIO;
dev_dbg(&client->dev, "Setting gain from %d to %lu\n",
- reg_read(client, MT9V022_ANALOG_GAIN), gain);
- if (reg_write(client, MT9V022_ANALOG_GAIN, gain) < 0)
+ reg_read(client, MT9V022_ANALOG_GAIN), gain_val);
+ if (reg_write(client, MT9V022_ANALOG_GAIN, gain_val) < 0)
return -EIO;
}
- break;
- case V4L2_CID_EXPOSURE:
- /* mt9v022 has maximum == default */
- if (ctrl->value > qctrl->maximum || ctrl->value < qctrl->minimum)
- return -EINVAL;
- else {
- unsigned long range = qctrl->maximum - qctrl->minimum;
- unsigned long shutter = ((ctrl->value - qctrl->minimum) *
- 479 + range / 2) / range + 1;
+ return 0;
+ case V4L2_CID_EXPOSURE_AUTO:
+ if (ctrl->val == V4L2_EXPOSURE_AUTO) {
+ data = reg_set(client, MT9V022_AEC_AGC_ENABLE, 0x1);
+ } else {
+ struct v4l2_ctrl *exp = mt9v022->exposure;
+ unsigned long range = exp->maximum - exp->minimum;
+ unsigned long shutter = ((exp->val - exp->minimum) *
+ 479 + range / 2) / range + 1;
+
/*
* The user wants to set shutter width manually, hope,
* she knows, what she's doing... Switch AEC off.
*/
-
- if (reg_clear(client, MT9V022_AEC_AGC_ENABLE, 0x1) < 0)
+ data = reg_clear(client, MT9V022_AEC_AGC_ENABLE, 0x1);
+ if (data < 0)
return -EIO;
-
dev_dbg(&client->dev, "Shutter width from %d to %lu\n",
- reg_read(client, MT9V022_TOTAL_SHUTTER_WIDTH),
- shutter);
+ reg_read(client, MT9V022_TOTAL_SHUTTER_WIDTH),
+ shutter);
if (reg_write(client, MT9V022_TOTAL_SHUTTER_WIDTH,
- shutter) < 0)
+ shutter) < 0)
return -EIO;
}
- break;
- case V4L2_CID_AUTOGAIN:
- if (ctrl->value)
- data = reg_set(client, MT9V022_AEC_AGC_ENABLE, 0x2);
- else
- data = reg_clear(client, MT9V022_AEC_AGC_ENABLE, 0x2);
- if (data < 0)
- return -EIO;
- break;
- case V4L2_CID_EXPOSURE_AUTO:
- if (ctrl->value)
- data = reg_set(client, MT9V022_AEC_AGC_ENABLE, 0x1);
- else
- data = reg_clear(client, MT9V022_AEC_AGC_ENABLE, 0x1);
- if (data < 0)
- return -EIO;
- break;
+ return 0;
}
- return 0;
+ return -EINVAL;
}
/*
@@ -752,9 +668,12 @@ static int mt9v022_g_skip_top_lines(struct v4l2_subdev *sd, u32 *lines)
return 0;
}
+static const struct v4l2_ctrl_ops mt9v022_ctrl_ops = {
+ .g_volatile_ctrl = mt9v022_g_volatile_ctrl,
+ .s_ctrl = mt9v022_s_ctrl,
+};
+
static struct v4l2_subdev_core_ops mt9v022_subdev_core_ops = {
- .g_ctrl = mt9v022_g_ctrl,
- .s_ctrl = mt9v022_s_ctrl,
.g_chip_ident = mt9v022_g_chip_ident,
#ifdef CONFIG_VIDEO_ADV_DEBUG
.g_register = mt9v022_g_register,
@@ -906,10 +825,39 @@ static int mt9v022_probe(struct i2c_client *client,
return -ENOMEM;
v4l2_i2c_subdev_init(&mt9v022->subdev, client, &mt9v022_subdev_ops);
+ v4l2_ctrl_handler_init(&mt9v022->hdl, 6);
+ v4l2_ctrl_new_std(&mt9v022->hdl, &mt9v022_ctrl_ops,
+ V4L2_CID_VFLIP, 0, 1, 1, 0);
+ v4l2_ctrl_new_std(&mt9v022->hdl, &mt9v022_ctrl_ops,
+ V4L2_CID_HFLIP, 0, 1, 1, 0);
+ mt9v022->autogain = v4l2_ctrl_new_std(&mt9v022->hdl, &mt9v022_ctrl_ops,
+ V4L2_CID_AUTOGAIN, 0, 1, 1, 1);
+ mt9v022->gain = v4l2_ctrl_new_std(&mt9v022->hdl, &mt9v022_ctrl_ops,
+ V4L2_CID_GAIN, 0, 127, 1, 64);
+
+ /*
+ * Simulated autoexposure. If enabled, we calculate shutter width
+ * ourselves in the driver based on vertical blanking and frame width
+ */
+ mt9v022->autoexposure = v4l2_ctrl_new_std_menu(&mt9v022->hdl,
+ &mt9v022_ctrl_ops, V4L2_CID_EXPOSURE_AUTO, 1, 0,
+ V4L2_EXPOSURE_AUTO);
+ mt9v022->exposure = v4l2_ctrl_new_std(&mt9v022->hdl, &mt9v022_ctrl_ops,
+ V4L2_CID_EXPOSURE, 1, 255, 1, 255);
+
+ mt9v022->subdev.ctrl_handler = &mt9v022->hdl;
+ if (mt9v022->hdl.error) {
+ int err = mt9v022->hdl.error;
+
+ kfree(mt9v022);
+ return err;
+ }
+ v4l2_ctrl_auto_cluster(2, &mt9v022->autoexposure,
+ V4L2_EXPOSURE_MANUAL, true);
+ v4l2_ctrl_auto_cluster(2, &mt9v022->autogain, 0, true);
mt9v022->chip_control = MT9V022_CHIP_CONTROL_DEFAULT;
- icd->ops = &mt9v022_ops;
/*
* MT9V022 _really_ corrupts the first read out line.
* TODO: verify on i.MX31
@@ -922,7 +870,7 @@ static int mt9v022_probe(struct i2c_client *client,
ret = mt9v022_video_probe(icd, client);
if (ret) {
- icd->ops = NULL;
+ v4l2_ctrl_handler_free(&mt9v022->hdl);
kfree(mt9v022);
}
@@ -934,8 +882,9 @@ static int mt9v022_remove(struct i2c_client *client)
struct mt9v022 *mt9v022 = to_mt9v022(client);
struct soc_camera_device *icd = client->dev.platform_data;
- icd->ops = NULL;
+ v4l2_device_unregister_subdev(&mt9v022->subdev);
mt9v022_video_remove(icd);
+ v4l2_ctrl_handler_free(&mt9v022->hdl);
kfree(mt9v022);
return 0;