@@ -257,9 +257,11 @@ static void setup_decoder_defaults(struct au8522_state *state, u8 input_mode)
au8522_writereg(state, AU8522_TVDED_DBG_MODE_REG060H,
AU8522_TVDED_DBG_MODE_REG060H_CVBS);
au8522_writereg(state, AU8522_TVDEC_FORMAT_CTRL1_REG061H,
- AU8522_TVDEC_FORMAT_CTRL1_REG061H_CVBS13);
+ AU8522_TVDEC_FORMAT_CTRL1_REG061H_FIELD_LEN_525 |
+ AU8522_TVDEC_FORMAT_CTRL1_REG061H_LINE_LEN_63_492 |
+ AU8522_TVDEC_FORMAT_CTRL1_REG061H_SUBCARRIER_NTSC_MN);
au8522_writereg(state, AU8522_TVDEC_FORMAT_CTRL2_REG062H,
- AU8522_TVDEC_FORMAT_CTRL2_REG062H_CVBS13);
+ AU8522_TVDEC_FORMAT_CTRL2_REG062H_STD_NTSC);
au8522_writereg(state, AU8522_TVDEC_VCR_DET_LLIM_REG063H,
AU8522_TVDEC_VCR_DET_LLIM_REG063H_CVBS);
au8522_writereg(state, AU8522_TVDEC_VCR_DET_HLIM_REG064H,
@@ -325,6 +325,31 @@ int au8522_led_ctrl(struct au8522_state *state, int led);
/**************************************************************/
+/* Format control 1 */
+
+/* VCR Mode 7-6 */
+#define AU8522_TVDEC_FORMAT_CTRL1_REG061H_VCR_MODE_YES 0x80
+#define AU8522_TVDEC_FORMAT_CTRL1_REG061H_VCR_MODE_NO 0x40
+#define AU8522_TVDEC_FORMAT_CTRL1_REG061H_VCR_MODE_AUTO 0x00
+/* Field len 5-4 */
+#define AU8522_TVDEC_FORMAT_CTRL1_REG061H_FIELD_LEN_625 0x20
+#define AU8522_TVDEC_FORMAT_CTRL1_REG061H_FIELD_LEN_525 0x10
+#define AU8522_TVDEC_FORMAT_CTRL1_REG061H_FIELD_LEN_AUTO 0x00
+/* Line len (us) 3-2 */
+#define AU8522_TVDEC_FORMAT_CTRL1_REG061H_LINE_LEN_64_000 0x0b
+#define AU8522_TVDEC_FORMAT_CTRL1_REG061H_LINE_LEN_63_492 0x08
+#define AU8522_TVDEC_FORMAT_CTRL1_REG061H_LINE_LEN_63_556 0x04
+/* Subcarrier freq 1-0 */
+#define AU8522_TVDEC_FORMAT_CTRL1_REG061H_SUBCARRIER_NTSC_AUTO 0x03
+#define AU8522_TVDEC_FORMAT_CTRL1_REG061H_SUBCARRIER_NTSC_443 0x02
+#define AU8522_TVDEC_FORMAT_CTRL1_REG061H_SUBCARRIER_NTSC_MN 0x01
+#define AU8522_TVDEC_FORMAT_CTRL1_REG061H_SUBCARRIER_NTSC_50 0x00
+
+/* Format control 2 */
+#define AU8522_TVDEC_FORMAT_CTRL2_REG062H_STD_AUTODETECT 0x00
+#define AU8522_TVDEC_FORMAT_CTRL2_REG062H_STD_NTSC 0x01
+
+
#define AU8522_INPUT_CONTROL_REG081H_ATSC 0xC4
#define AU8522_INPUT_CONTROL_REG081H_ATVRF 0xC4
#define AU8522_INPUT_CONTROL_REG081H_ATVRF13 0xC4
@@ -385,9 +410,6 @@ int au8522_led_ctrl(struct au8522_state *state, int led);
#define AU8522_TVDEC_COMB_MODE_REG015H_CVBS 0x00
#define AU8522_REG016H_CVBS 0x00
#define AU8522_TVDED_DBG_MODE_REG060H_CVBS 0x00
-#define AU8522_TVDEC_FORMAT_CTRL1_REG061H_CVBS 0x0B
-#define AU8522_TVDEC_FORMAT_CTRL1_REG061H_CVBS13 0x03
-#define AU8522_TVDEC_FORMAT_CTRL2_REG062H_CVBS13 0x00
#define AU8522_TVDEC_VCR_DET_LLIM_REG063H_CVBS 0x19
#define AU8522_REG0F9H_AUDIO 0x20
#define AU8522_TVDEC_VCR_DET_HLIM_REG064H_CVBS 0xA7
It turns up the autodetection for the video standard in the au8522 is prone to hanging the chip until a reset is performed. This condition is trivial to reproduce simply by tuning to a station and then rapidly unplugging/ replugging the coax feed. Because we've never claimed to support anything other than NTSC-M, just disable the video-standard autodetection logic and force it to always be NTSC-M. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> --- drivers/media/dvb/frontends/au8522_decoder.c | 6 +++- drivers/media/dvb/frontends/au8522_priv.h | 28 +++++++++++++++++++++++-- 2 files changed, 29 insertions(+), 5 deletions(-)