deleted file mode 100644
@@ -1,169 +0,0 @@
-/*
- * driver for ENE KB3926 B/C/D CIR (also known as ENE0100)
- *
- * Copyright (C) 2009 Maxim Levitsky <maximlevitsky@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-
-#include <media/lirc.h>
-#include <media/lirc_dev.h>
-
-/* hardware address */
-#define ENE_STATUS 0 /* hardware status - unused */
-#define ENE_ADDR_HI 1 /* hi byte of register address */
-#define ENE_ADDR_LO 2 /* low byte of register address */
-#define ENE_IO 3 /* read/write window */
-#define ENE_MAX_IO 4
-
-/* 8 bytes of samples, divided in 2 halfs*/
-#define ENE_SAMPLE_BUFFER 0xF8F0 /* regular sample buffer */
-#define ENE_SAMPLE_SPC_MASK (1 << 7) /* sample is space */
-#define ENE_SAMPLE_VALUE_MASK 0x7F
-#define ENE_SAMPLE_OVERFLOW 0x7F
-#define ENE_SAMPLES_SIZE 4
-
-/* fan input sample buffer */
-#define ENE_SAMPLE_BUFFER_FAN 0xF8FB /* this buffer holds high byte of */
- /* each sample of normal buffer */
-
-#define ENE_FAN_SMPL_PULS_MSK 0x8000 /* this bit of combined sample */
- /* if set, says that sample is pulse */
-#define ENE_FAN_VALUE_MASK 0x0FFF /* mask for valid bits of the value */
-
-/* first firmware register */
-#define ENE_FW1 0xF8F8
-#define ENE_FW1_ENABLE (1 << 0) /* enable fw processing */
-#define ENE_FW1_TXIRQ (1 << 1) /* TX interrupt pending */
-#define ENE_FW1_WAKE (1 << 6) /* enable wake from S3 */
-#define ENE_FW1_IRQ (1 << 7) /* enable interrupt */
-
-/* second firmware register */
-#define ENE_FW2 0xF8F9
-#define ENE_FW2_BUF_HIGH (1 << 0) /* which half of the buffer to read */
-#define ENE_FW2_IRQ_CLR (1 << 2) /* clear this on IRQ */
-#define ENE_FW2_GP40_AS_LEARN (1 << 4) /* normal input is used as */
- /* learning input */
-#define ENE_FW2_FAN_AS_NRML_IN (1 << 6) /* fan is used as normal input */
-#define ENE_FW2_LEARNING (1 << 7) /* hardware supports learning and TX */
-
-/* fan as input settings - only if learning capable */
-#define ENE_FAN_AS_IN1 0xFE30 /* fan init reg 1 */
-#define ENE_FAN_AS_IN1_EN 0xCD
-#define ENE_FAN_AS_IN2 0xFE31 /* fan init reg 2 */
-#define ENE_FAN_AS_IN2_EN 0x03
-#define ENE_SAMPLE_PERIOD_FAN 61 /* fan input has fixed sample period */
-
-/* IRQ registers block (for revision B) */
-#define ENEB_IRQ 0xFD09 /* IRQ number */
-#define ENEB_IRQ_UNK1 0xFD17 /* unknown setting = 1 */
-#define ENEB_IRQ_STATUS 0xFD80 /* irq status */
-#define ENEB_IRQ_STATUS_IR (1 << 5) /* IR irq */
-
-/* IRQ registers block (for revision C,D) */
-#define ENEC_IRQ 0xFE9B /* new irq settings register */
-#define ENEC_IRQ_MASK 0x0F /* irq number mask */
-#define ENEC_IRQ_UNK_EN (1 << 4) /* always enabled */
-#define ENEC_IRQ_STATUS (1 << 5) /* irq status and ACK */
-
-/* CIR block settings */
-#define ENE_CIR_CONF1 0xFEC0
-#define ENE_CIR_CONF1_ADC_ON 0x7 /* receiver on gpio40 enabled */
-#define ENE_CIR_CONF1_LEARN1 (1 << 3) /* enabled on learning mode */
-#define ENE_CIR_CONF1_TX_ON 0x30 /* enabled on transmit */
-#define ENE_CIR_CONF1_TX_CARR (1 << 7) /* send TX carrier or not */
-
-#define ENE_CIR_CONF2 0xFEC1 /* unknown setting = 0 */
-#define ENE_CIR_CONF2_LEARN2 (1 << 4) /* set on enable learning */
-#define ENE_CIR_CONF2_GPIO40DIS (1 << 5) /* disable normal input via gpio40 */
-
-#define ENE_CIR_SAMPLE_PERIOD 0xFEC8 /* sample period in us */
-#define ENE_CIR_SAMPLE_OVERFLOW (1 << 7) /* interrupt on overflows if set */
-
-
-/* transmitter - not implemented yet */
-/* KB3926C and higher */
-/* transmission is very similar to receiving, a byte is written to */
-/* ENE_TX_INPUT, in same manner as it is read from sample buffer */
-/* sample period is fixed*/
-
-
-/* transmitter ports */
-#define ENE_TX_PORT1 0xFC01 /* this enables one or both */
-#define ENE_TX_PORT1_EN (1 << 5) /* TX ports */
-#define ENE_TX_PORT2 0xFC08
-#define ENE_TX_PORT2_EN (1 << 1)
-
-#define ENE_TX_INPUT 0xFEC9 /* next byte to transmit */
-#define ENE_TX_SPC_MASK (1 << 7) /* Transmitted sample is space */
-#define ENE_TX_UNK1 0xFECB /* set to 0x63 */
-#define ENE_TX_SMPL_PERIOD 50 /* transmit sample period */
-
-
-#define ENE_TX_CARRIER 0xFECE /* TX carrier * 2 (khz) */
-#define ENE_TX_CARRIER_UNKBIT 0x80 /* This bit set on transmit */
-#define ENE_TX_CARRIER_LOW 0xFECF /* TX carrier / 2 */
-
-/* Hardware versions */
-#define ENE_HW_VERSION 0xFF00 /* hardware revision */
-#define ENE_HW_UNK 0xFF1D
-#define ENE_HW_UNK_CLR (1 << 2)
-#define ENE_HW_VER_MAJOR 0xFF1E /* chip version */
-#define ENE_HW_VER_MINOR 0xFF1F
-#define ENE_HW_VER_OLD 0xFD00
-
-#define same_sign(a, b) ((((a) > 0) && (b) > 0) || ((a) < 0 && (b) < 0))
-
-#define ENE_DRIVER_NAME "enecir"
-#define ENE_MAXGAP 250000 /* this is amount of time we wait
- before turning the sampler, chosen
- arbitry */
-
-#define space(len) (-(len)) /* add a space */
-
-/* software defines */
-#define ENE_IRQ_RX 1
-#define ENE_IRQ_TX 2
-
-#define ENE_HW_B 1 /* 3926B */
-#define ENE_HW_C 2 /* 3926C */
-#define ENE_HW_D 3 /* 3926D */
-
-#define ene_printk(level, text, ...) \
- printk(level ENE_DRIVER_NAME ": " text, ## __VA_ARGS__)
-
-struct ene_device {
- struct pnp_dev *pnp_dev;
- struct lirc_driver *lirc_driver;
-
- /* hw settings */
- unsigned long hw_io;
- int irq;
-
- int hw_revision; /* hardware revision */
- int hw_learning_and_tx_capable; /* learning capable */
- int hw_gpio40_learning; /* gpio40 is learning */
- int hw_fan_as_normal_input; /* fan input is used as regular input */
-
- /* device data */
- int idle;
- int fan_input_inuse;
-
- int sample;
- int in_use;
-
- struct timeval gap_start;
-};
There is a proper ene0100 driver anyway. Signed-off-by: Sean Young <sean@mess.org> --- drivers/staging/media/lirc/lirc_ene0100.h | 169 ------------------------------ 1 file changed, 169 deletions(-) delete mode 100644 drivers/staging/media/lirc/lirc_ene0100.h