diff --git a/drivers/media/Kconfig b/drivers/media/Kconfig
index 9c3698a..dd13e3a 100644
--- a/drivers/media/Kconfig
+++ b/drivers/media/Kconfig
@@ -162,10 +162,27 @@ source "drivers/media/common/Kconfig"
 # Ancillary drivers (tuners, i2c, frontends)
 #
 
+config MEDIA_SUBDRV_AUTOSELECT
+	bool "Autoselect analog and hybrid tuner modules to build"
+	depends on MEDIA_TUNER
+	default y
+	help
+	  By default, a TV driver auto-selects all possible tuners
+	  thar could be used by the driver.
+
+	  This is generally the right thing to do, except when there
+	  are strict constraints with regards to the kernel size.
+
+	  Use this option with care, as deselecting tuner drivers which
+	  are in fact necessary will result in TV devices which cannot
+	  be tuned due to lack of the tuning driver.
+
+	  If unsure say Y.
+
 comment "Media ancillary drivers (tuners, sensors, i2c, frontends)"
 
-source "drivers/media/tuners/Kconfig"
 source "drivers/media/i2c/Kconfig"
+source "drivers/media/tuners/Kconfig"
 source "drivers/media/dvb-frontends/Kconfig"
 
 endif # MEDIA_SUPPORT
diff --git a/drivers/media/common/b2c2/Kconfig b/drivers/media/common/b2c2/Kconfig
index e270dd8..29149de 100644
--- a/drivers/media/common/b2c2/Kconfig
+++ b/drivers/media/common/b2c2/Kconfig
@@ -3,20 +3,20 @@ config DVB_B2C2_FLEXCOP
 	depends on DVB_CORE && I2C
 	depends on DVB_B2C2_FLEXCOP_PCI || DVB_B2C2_FLEXCOP_USB
 	default y
-	select DVB_PLL if !DVB_FE_CUSTOMISE
-	select DVB_STV0299 if !DVB_FE_CUSTOMISE
-	select DVB_MT352 if !DVB_FE_CUSTOMISE
-	select DVB_MT312 if !DVB_FE_CUSTOMISE
-	select DVB_NXT200X if !DVB_FE_CUSTOMISE
-	select DVB_STV0297 if !DVB_FE_CUSTOMISE
-	select DVB_BCM3510 if !DVB_FE_CUSTOMISE
-	select DVB_LGDT330X if !DVB_FE_CUSTOMISE
-	select DVB_S5H1420 if !DVB_FE_CUSTOMISE
-	select DVB_TUNER_ITD1000 if !DVB_FE_CUSTOMISE
-	select DVB_ISL6421 if !DVB_FE_CUSTOMISE
-	select DVB_CX24123 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMISE
-	select DVB_TUNER_CX24113 if !DVB_FE_CUSTOMISE
+	select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_MT352 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_MT312 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_NXT200X if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STV0297 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_BCM3510 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_LGDT330X if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_S5H1420 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TUNER_ITD1000 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_ISL6421 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_CX24123 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_SIMPLE if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TUNER_CX24113 if MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Support for the digital TV receiver chip made by B2C2 Inc. included in
 	  Technisats PCI cards and USB boxes.
diff --git a/drivers/media/dvb-frontends/Kconfig b/drivers/media/dvb-frontends/Kconfig
index a08c215..5efec73 100644
--- a/drivers/media/dvb-frontends/Kconfig
+++ b/drivers/media/dvb-frontends/Kconfig
@@ -1,20 +1,5 @@
-config DVB_FE_CUSTOMISE
-	bool "Customise the frontend modules to build"
-	depends on DVB_CORE
-	depends on EXPERT
-	default y if EXPERT
-	help
-	  This allows the user to select/deselect frontend drivers for their
-	  hardware from the build.
-
-	  Use this option with care as deselecting frontends which are in fact
-	  necessary will result in DVB devices which cannot be tuned due to lack
-	  of driver support.
-
-	  If unsure say N.
-
 menu "Customise DVB Frontends"
-	visible if DVB_FE_CUSTOMISE
+	visible if !MEDIA_SUBDRV_AUTOSELECT
 
 comment "Multistandard (satellite) frontends"
 	depends on DVB_CORE
@@ -22,7 +7,7 @@ comment "Multistandard (satellite) frontends"
 config DVB_STB0899
 	tristate "STB0899 based"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A DVB-S/S2/DSS Multistandard demodulator. Say Y when you want
 	  to support this demodulator based frontends
@@ -30,7 +15,7 @@ config DVB_STB0899
 config DVB_STB6100
 	tristate "STB6100 based tuners"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A Silicon tuner from ST used in conjunction with the STB0899
 	  demodulator. Say Y when you want to support this tuner.
@@ -38,7 +23,7 @@ config DVB_STB6100
 config DVB_STV090x
 	tristate "STV0900/STV0903(A/B) based"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  DVB-S/S2/DSS Multistandard Professional/Broadcast demodulators.
 	  Say Y when you want to support these frontends.
@@ -46,7 +31,7 @@ config DVB_STV090x
 config DVB_STV6110x
 	tristate "STV6110/(A) based tuners"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A Silicon tuner that supports DVB-S and DVB-S2 modes
 
@@ -56,7 +41,7 @@ comment "Multistandard (cable + terrestrial) frontends"
 config DVB_DRXK
 	tristate "Micronas DRXK based"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Micronas DRX-K DVB-C/T demodulator.
 
@@ -65,7 +50,7 @@ config DVB_DRXK
 config DVB_TDA18271C2DD
 	tristate "NXP TDA18271C2 silicon tuner"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  NXP TDA18271 silicon tuner.
 
@@ -77,119 +62,119 @@ comment "DVB-S (satellite) frontends"
 config DVB_CX24110
 	tristate "Conexant CX24110 based"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A DVB-S tuner module. Say Y when you want to support this frontend.
 
 config DVB_CX24123
 	tristate "Conexant CX24123 based"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A DVB-S tuner module. Say Y when you want to support this frontend.
 
 config DVB_MT312
 	tristate "Zarlink VP310/MT312/ZL10313 based"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A DVB-S tuner module. Say Y when you want to support this frontend.
 
 config DVB_ZL10036
 	tristate "Zarlink ZL10036 silicon tuner"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A DVB-S tuner module. Say Y when you want to support this frontend.
 
 config DVB_ZL10039
 	tristate "Zarlink ZL10039 silicon tuner"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A DVB-S tuner module. Say Y when you want to support this frontend.
 
 config DVB_S5H1420
 	tristate "Samsung S5H1420 based"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A DVB-S tuner module. Say Y when you want to support this frontend.
 
 config DVB_STV0288
 	tristate "ST STV0288 based"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A DVB-S tuner module. Say Y when you want to support this frontend.
 
 config DVB_STB6000
 	tristate "ST STB6000 silicon tuner"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	  help
 	  A DVB-S silicon tuner module. Say Y when you want to support this tuner.
 
 config DVB_STV0299
 	tristate "ST STV0299 based"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A DVB-S tuner module. Say Y when you want to support this frontend.
 
 config DVB_STV6110
 	tristate "ST STV6110 silicon tuner"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	  help
 	  A DVB-S silicon tuner module. Say Y when you want to support this tuner.
 
 config DVB_STV0900
 	tristate "ST STV0900 based"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A DVB-S/S2 demodulator. Say Y when you want to support this frontend.
 
 config DVB_TDA8083
 	tristate "Philips TDA8083 based"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A DVB-S tuner module. Say Y when you want to support this frontend.
 
 config DVB_TDA10086
 	tristate "Philips TDA10086 based"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A DVB-S tuner module. Say Y when you want to support this frontend.
 
 config DVB_TDA8261
 	tristate "Philips TDA8261 based"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A DVB-S tuner module. Say Y when you want to support this frontend.
 
 config DVB_VES1X93
 	tristate "VLSI VES1893 or VES1993 based"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A DVB-S tuner module. Say Y when you want to support this frontend.
 
 config DVB_TUNER_ITD1000
 	tristate "Integrant ITD1000 Zero IF tuner for DVB-S/DSS"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A DVB-S tuner module. Say Y when you want to support this frontend.
 
 config DVB_TUNER_CX24113
 	tristate "Conexant CX24113/CX24128 tuner for DVB-S/DSS"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A DVB-S tuner module. Say Y when you want to support this frontend.
 
@@ -197,42 +182,42 @@ config DVB_TUNER_CX24113
 config DVB_TDA826X
 	tristate "Philips TDA826X silicon tuner"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A DVB-S silicon tuner module. Say Y when you want to support this tuner.
 
 config DVB_TUA6100
 	tristate "Infineon TUA6100 PLL"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A DVB-S PLL chip.
 
 config DVB_CX24116
 	tristate "Conexant CX24116 based"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A DVB-S/S2 tuner module. Say Y when you want to support this frontend.
 
 config DVB_SI21XX
 	tristate "Silicon Labs SI21XX based"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A DVB-S tuner module. Say Y when you want to support this frontend.
 
 config DVB_DS3000
 	tristate "Montage Tehnology DS3000 based"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A DVB-S/S2 tuner module. Say Y when you want to support this frontend.
 
 config DVB_MB86A16
 	tristate "Fujitsu MB86A16 based"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A DVB-S/DSS Direct Conversion reveiver.
 	  Say Y when you want to support this frontend.
@@ -240,7 +225,7 @@ config DVB_MB86A16
 config DVB_TDA10071
 	tristate "NXP TDA10071"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Say Y when you want to support this frontend.
 
@@ -250,7 +235,7 @@ comment "DVB-T (terrestrial) frontends"
 config DVB_SP8870
 	tristate "Spase sp8870 based"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A DVB-T tuner module. Say Y when you want to support this frontend.
 
@@ -262,7 +247,7 @@ config DVB_SP8870
 config DVB_SP887X
 	tristate "Spase sp887x based"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A DVB-T tuner module. Say Y when you want to support this frontend.
 
@@ -274,28 +259,28 @@ config DVB_SP887X
 config DVB_CX22700
 	tristate "Conexant CX22700 based"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A DVB-T tuner module. Say Y when you want to support this frontend.
 
 config DVB_CX22702
 	tristate "Conexant cx22702 demodulator (OFDM)"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A DVB-T tuner module. Say Y when you want to support this frontend.
 
 config DVB_S5H1432
 	tristate "Samsung s5h1432 demodulator (OFDM)"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A DVB-T tuner module. Say Y when you want to support this frontend.
 
 config DVB_DRXD
 	tristate "Micronas DRXD driver"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A DVB-T tuner module. Say Y when you want to support this frontend.
 
@@ -306,14 +291,14 @@ config DVB_DRXD
 config DVB_L64781
 	tristate "LSI L64781"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A DVB-T tuner module. Say Y when you want to support this frontend.
 
 config DVB_TDA1004X
 	tristate "Philips TDA10045H/TDA10046H based"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A DVB-T tuner module. Say Y when you want to support this frontend.
 
@@ -326,28 +311,28 @@ config DVB_TDA1004X
 config DVB_NXT6000
 	tristate "NxtWave Communications NXT6000 based"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A DVB-T tuner module. Say Y when you want to support this frontend.
 
 config DVB_MT352
 	tristate "Zarlink MT352 based"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A DVB-T tuner module. Say Y when you want to support this frontend.
 
 config DVB_ZL10353
 	tristate "Zarlink ZL10353 based"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A DVB-T tuner module. Say Y when you want to support this frontend.
 
 config DVB_DIB3000MB
 	tristate "DiBcom 3000M-B"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A DVB-T tuner module. Designed for mobile usage. Say Y when you want
 	  to support this frontend.
@@ -355,7 +340,7 @@ config DVB_DIB3000MB
 config DVB_DIB3000MC
 	tristate "DiBcom 3000P/M-C"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A DVB-T tuner module. Designed for mobile usage. Say Y when you want
 	  to support this frontend.
@@ -363,7 +348,7 @@ config DVB_DIB3000MC
 config DVB_DIB7000M
 	tristate "DiBcom 7000MA/MB/PA/PB/MC"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A DVB-T tuner module. Designed for mobile usage. Say Y when you want
 	  to support this frontend.
@@ -371,7 +356,7 @@ config DVB_DIB7000M
 config DVB_DIB7000P
 	tristate "DiBcom 7000PC"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A DVB-T tuner module. Designed for mobile usage. Say Y when you want
 	  to support this frontend.
@@ -379,7 +364,7 @@ config DVB_DIB7000P
 config DVB_DIB9000
 	tristate "DiBcom 9000"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A DVB-T tuner module. Designed for mobile usage. Say Y when you want
 	  to support this frontend.
@@ -387,56 +372,56 @@ config DVB_DIB9000
 config DVB_TDA10048
 	tristate "Philips TDA10048HN based"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A DVB-T tuner module. Say Y when you want to support this frontend.
 
 config DVB_AF9013
 	tristate "Afatech AF9013 demodulator"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Say Y when you want to support this frontend.
 
 config DVB_EC100
 	tristate "E3C EC100"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Say Y when you want to support this frontend.
 
 config DVB_HD29L2
 	tristate "HDIC HD29L2"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Say Y when you want to support this frontend.
 
 config DVB_STV0367
 	tristate "ST STV0367 based"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A DVB-T/C tuner module. Say Y when you want to support this frontend.
 
 config DVB_CXD2820R
 	tristate "Sony CXD2820R"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Say Y when you want to support this frontend.
 
 config DVB_RTL2830
 	tristate "Realtek RTL2830 DVB-T"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Say Y when you want to support this frontend.
 
 config DVB_RTL2832
 	tristate "Realtek RTL2832 DVB-T"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Say Y when you want to support this frontend.
 
@@ -446,28 +431,28 @@ comment "DVB-C (cable) frontends"
 config DVB_VES1820
 	tristate "VLSI VES1820 based"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A DVB-C tuner module. Say Y when you want to support this frontend.
 
 config DVB_TDA10021
 	tristate "Philips TDA10021 based"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A DVB-C tuner module. Say Y when you want to support this frontend.
 
 config DVB_TDA10023
 	tristate "Philips TDA10023 based"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A DVB-C tuner module. Say Y when you want to support this frontend.
 
 config DVB_STV0297
 	tristate "ST STV0297 based"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A DVB-C tuner module. Say Y when you want to support this frontend.
 
@@ -477,7 +462,7 @@ comment "ATSC (North American/Korean Terrestrial/Cable DTV) frontends"
 config DVB_NXT200X
 	tristate "NxtWave Communications NXT2002/NXT2004 based"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want
 	  to support this frontend.
@@ -491,7 +476,7 @@ config DVB_NXT200X
 config DVB_OR51211
 	tristate "Oren OR51211 based"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  An ATSC 8VSB tuner module. Say Y when you want to support this frontend.
 
@@ -503,7 +488,7 @@ config DVB_OR51211
 config DVB_OR51132
 	tristate "Oren OR51132 based"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want
 	  to support this frontend.
@@ -518,7 +503,7 @@ config DVB_OR51132
 config DVB_BCM3510
 	tristate "Broadcom BCM3510"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  An ATSC 8VSB/16VSB and QAM64/256 tuner module. Say Y when you want to
 	  support this frontend.
@@ -526,7 +511,7 @@ config DVB_BCM3510
 config DVB_LGDT330X
 	tristate "LG Electronics LGDT3302/LGDT3303 based"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want
 	  to support this frontend.
@@ -534,7 +519,7 @@ config DVB_LGDT330X
 config DVB_LGDT3305
 	tristate "LG Electronics LGDT3304 and LGDT3305 based"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want
 	  to support this frontend.
@@ -542,7 +527,7 @@ config DVB_LGDT3305
 config DVB_LG2160
 	tristate "LG Electronics LG216x based"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  An ATSC/MH demodulator module. Say Y when you want
 	  to support this frontend.
@@ -550,7 +535,7 @@ config DVB_LG2160
 config DVB_S5H1409
 	tristate "Samsung S5H1409 based"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want
 	  to support this frontend.
@@ -563,7 +548,7 @@ config DVB_AU8522_DTV
 	tristate "Auvitek AU8522 based DTV demod"
 	depends on DVB_CORE && I2C
 	select DVB_AU8522
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  An ATSC 8VSB, QAM64/256 & NTSC demodulator module. Say Y when
 	  you want to enable DTV demodulation support for this frontend.
@@ -572,7 +557,7 @@ config DVB_AU8522_V4L
 	tristate "Auvitek AU8522 based ATV demod"
 	depends on VIDEO_V4L2 && I2C
 	select DVB_AU8522
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  An ATSC 8VSB, QAM64/256 & NTSC demodulator module. Say Y when
 	  you want to enable ATV demodulation support for this frontend.
@@ -580,7 +565,7 @@ config DVB_AU8522_V4L
 config DVB_S5H1411
 	tristate "Samsung S5H1411 based"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want
 	  to support this frontend.
@@ -591,7 +576,7 @@ comment "ISDB-T (terrestrial) frontends"
 config DVB_S921
 	tristate "Sharp S921 frontend"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  AN ISDB-T DQPSK, QPSK, 16QAM and 64QAM 1seg tuner module.
 	  Say Y when you want to support this frontend.
@@ -599,7 +584,7 @@ config DVB_S921
 config DVB_DIB8000
 	tristate "DiBcom 8000MB/MC"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A driver for DiBcom's DiB8000 ISDB-T/ISDB-Tsb demodulator.
 	  Say Y when you want to support this frontend.
@@ -607,7 +592,7 @@ config DVB_DIB8000
 config DVB_MB86A20S
 	tristate "Fujitsu mb86a20s"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A driver for Fujitsu mb86a20s ISDB-T/ISDB-Tsb demodulator.
 	  Say Y when you want to support this frontend.
@@ -618,7 +603,7 @@ comment "Digital terrestrial only tuners/PLL"
 config DVB_PLL
 	tristate "Generic I2C PLL based tuners"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  This module drives a number of tuners based on PLL chips with a
 	  common I2C interface. Say Y when you want to support these tuners.
@@ -626,7 +611,7 @@ config DVB_PLL
 config DVB_TUNER_DIB0070
 	tristate "DiBcom DiB0070 silicon base-band tuner"
 	depends on I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A driver for the silicon baseband tuner DiB0070 from DiBcom.
 	  This device is only used inside a SiP called together with a
@@ -635,7 +620,7 @@ config DVB_TUNER_DIB0070
 config DVB_TUNER_DIB0090
 	tristate "DiBcom DiB0090 silicon base-band tuner"
 	depends on I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A driver for the silicon baseband tuner DiB0090 from DiBcom.
 	  This device is only used inside a SiP called together with a
@@ -647,14 +632,14 @@ comment "SEC control devices for DVB-S"
 config DVB_LNBP21
 	tristate "LNBP21/LNBH24 SEC controllers"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  An SEC control chips.
 
 config DVB_LNBP22
 	tristate "LNBP22 SEC controllers"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  LNB power supply and control voltage
 	  regulator chip with step-up converter
@@ -664,33 +649,33 @@ config DVB_LNBP22
 config DVB_ISL6405
 	tristate "ISL6405 SEC controller"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  An SEC control chip.
 
 config DVB_ISL6421
 	tristate "ISL6421 SEC controller"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  An SEC control chip.
 
 config DVB_ISL6423
 	tristate "ISL6423 SEC controller"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A SEC controller chip from Intersil
 
 config DVB_A8293
 	tristate "Allegro A8293"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 
 config DVB_LGS8GL5
 	tristate "Silicon Legend LGS-8GL5 demodulator (OFDM)"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A DMB-TH tuner module. Say Y when you want to support this frontend.
 
@@ -698,21 +683,21 @@ config DVB_LGS8GXX
 	tristate "Legend Silicon LGS8913/LGS8GL5/LGS8GXX DMB-TH demodulator"
 	depends on DVB_CORE && I2C
 	select FW_LOADER
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A DMB-TH tuner module. Say Y when you want to support this frontend.
 
 config DVB_ATBM8830
 	tristate "AltoBeam ATBM8830/8831 DMB-TH demodulator"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A DMB-TH tuner module. Say Y when you want to support this frontend.
 
 config DVB_TDA665x
 	tristate "TDA665x tuner"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Support for tuner modules based on Philips TDA6650/TDA6651 chips.
 	  Say Y when you want to support this chip.
@@ -723,14 +708,14 @@ config DVB_TDA665x
 config DVB_IX2505V
 	tristate "Sharp IX2505V silicon tuner"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A DVB-S tuner module. Say Y when you want to support this frontend.
 
 config DVB_IT913X_FE
 	tristate "it913x frontend and it9137 tuner"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A DVB-T tuner module.
 	  Say Y when you want to support this frontend.
@@ -738,7 +723,7 @@ config DVB_IT913X_FE
 config DVB_M88RS2000
 	tristate "M88RS2000 DVB-S demodulator and tuner"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A DVB-S tuner module.
 	  Say Y when you want to support this frontend.
@@ -746,7 +731,7 @@ config DVB_M88RS2000
 config DVB_AF9033
 	tristate "Afatech AF9033 DVB-T demodulator"
 	depends on DVB_CORE && I2C
-	default m if DVB_FE_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 
 comment "Tools to develop new frontends"
 
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index ad2c9de..fd88c40 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -16,21 +16,8 @@ config VIDEO_TVEEPROM
 
 if VIDEO_V4L2
 
-config VIDEO_HELPER_CHIPS_AUTO
-	bool "Autoselect pertinent encoders/decoders and other helper chips"
-	default y if !EXPERT
-	---help---
-	  Most video cards may require additional modules to encode or
-	  decode audio/video standards. This option will autoselect
-	  all pertinent modules to each selected video module.
-
-	  Unselect this only if you know exactly what you are doing, since
-	  it may break support on some boards.
-
-	  In doubt, say Y.
-
 config VIDEO_IR_I2C
-	tristate "I2C module for IR" if !VIDEO_HELPER_CHIPS_AUTO
+	tristate "I2C module for IR" if !MEDIA_SUBDRV_AUTOSELECT
 	depends on I2C && RC_CORE
 	default y
 	---help---
@@ -47,7 +34,7 @@ config VIDEO_IR_I2C
 #
 
 menu "Encoders, decoders, sensors and other helper chips"
-	visible if !VIDEO_HELPER_CHIPS_AUTO
+	visible if !MEDIA_SUBDRV_AUTOSELECT
 
 comment "Audio decoders, processors and mixers"
 
@@ -561,10 +548,14 @@ config VIDEO_M52790
 
 	 To compile this driver as a module, choose M here: the
 	 module will be called m52790.
+endmenu
+	 
+menu "Sensors used on soc_camera driver"
 
 if SOC_CAMERA
 	source "drivers/media/i2c/soc_camera/Kconfig"
 endif
 
 endmenu
+
 endif
diff --git a/drivers/media/pci/bt8xx/Kconfig b/drivers/media/pci/bt8xx/Kconfig
index f2667a5..61d09e0 100644
--- a/drivers/media/pci/bt8xx/Kconfig
+++ b/drivers/media/pci/bt8xx/Kconfig
@@ -7,10 +7,10 @@ config VIDEO_BT848
 	depends on RC_CORE
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
-	select VIDEO_MSP3400 if VIDEO_HELPER_CHIPS_AUTO
-	select VIDEO_TVAUDIO if VIDEO_HELPER_CHIPS_AUTO
-	select VIDEO_TDA7432 if VIDEO_HELPER_CHIPS_AUTO
-	select VIDEO_SAA6588 if VIDEO_HELPER_CHIPS_AUTO
+	select VIDEO_MSP3400 if MEDIA_SUBDRV_AUTOSELECT
+	select VIDEO_TVAUDIO if MEDIA_SUBDRV_AUTOSELECT
+	select VIDEO_TDA7432 if MEDIA_SUBDRV_AUTOSELECT
+	select VIDEO_SAA6588 if MEDIA_SUBDRV_AUTOSELECT
 	---help---
 	  Support for BT848 based frame grabber/overlay boards. This includes
 	  the Miro, Hauppauge and STB boards. Please read the material in
@@ -22,14 +22,14 @@ config VIDEO_BT848
 config DVB_BT8XX
 	tristate "DVB/ATSC Support for bt878 based TV cards"
 	depends on DVB_CORE && PCI && I2C && VIDEO_BT848
-	select DVB_MT352 if !DVB_FE_CUSTOMISE
-	select DVB_SP887X if !DVB_FE_CUSTOMISE
-	select DVB_NXT6000 if !DVB_FE_CUSTOMISE
-	select DVB_CX24110 if !DVB_FE_CUSTOMISE
-	select DVB_OR51211 if !DVB_FE_CUSTOMISE
-	select DVB_LGDT330X if !DVB_FE_CUSTOMISE
-	select DVB_ZL10353 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMISE
+	select DVB_MT352 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_SP887X if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_NXT6000 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_CX24110 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_OR51211 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_LGDT330X if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_ZL10353 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_SIMPLE if MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Support for PCI cards based on the Bt8xx PCI bridge. Examples are
 	  the Nebula cards, the Pinnacle PCTV cards, the Twinhan DST cards,
diff --git a/drivers/media/pci/cx18/Kconfig b/drivers/media/pci/cx18/Kconfig
index 53b3c77..9a9f765 100644
--- a/drivers/media/pci/cx18/Kconfig
+++ b/drivers/media/pci/cx18/Kconfig
@@ -8,11 +8,11 @@ config VIDEO_CX18
 	select VIDEO_TVEEPROM
 	select VIDEO_CX2341X
 	select VIDEO_CS5345
-	select DVB_S5H1409 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE
-	select DVB_S5H1411 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_TDA18271 if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_TDA8290 if !MEDIA_TUNER_CUSTOMISE
+	select DVB_S5H1409 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_MXL5005S if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_S5H1411 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_TDA18271 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_TDA8290 if MEDIA_SUBDRV_AUTOSELECT
 	---help---
 	  This is a video4linux driver for Conexant cx23418 based
 	  PCI combo video recorder devices.
diff --git a/drivers/media/pci/cx23885/Kconfig b/drivers/media/pci/cx23885/Kconfig
index b391e9b..9c6afe9 100644
--- a/drivers/media/pci/cx23885/Kconfig
+++ b/drivers/media/pci/cx23885/Kconfig
@@ -11,23 +11,23 @@ config VIDEO_CX23885
 	select VIDEOBUF_DMA_SG
 	select VIDEO_CX25840
 	select VIDEO_CX2341X
-	select DVB_DIB7000P if !DVB_FE_CUSTOMISE
-	select DVB_S5H1409 if !DVB_FE_CUSTOMISE
-	select DVB_S5H1411 if !DVB_FE_CUSTOMISE
-	select DVB_LGDT330X if !DVB_FE_CUSTOMISE
-	select DVB_ZL10353 if !DVB_FE_CUSTOMISE
-	select DVB_TDA10048 if !DVB_FE_CUSTOMISE
-	select DVB_LNBP21 if !DVB_FE_CUSTOMISE
-	select DVB_STV6110 if !DVB_FE_CUSTOMISE
-	select DVB_CX24116 if !DVB_FE_CUSTOMISE
-	select DVB_STV0900 if !DVB_FE_CUSTOMISE
-	select DVB_DS3000 if !DVB_FE_CUSTOMISE
-	select DVB_STV0367 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_MT2131 if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_TDA8290 if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_TDA18271 if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_XC5000 if !MEDIA_TUNER_CUSTOMISE
+	select DVB_DIB7000P if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_S5H1409 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_S5H1411 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_LGDT330X if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_ZL10353 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TDA10048 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_LNBP21 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STV6110 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_CX24116 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STV0900 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_DS3000 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STV0367 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_MT2131 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_XC2028 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_TDA8290 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_TDA18271 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_XC5000 if MEDIA_SUBDRV_AUTOSELECT
 	---help---
 	  This is a video4linux driver for Conexant 23885 based
 	  TV cards.
diff --git a/drivers/media/pci/cx88/Kconfig b/drivers/media/pci/cx88/Kconfig
index 3598dc0..d27fccb 100644
--- a/drivers/media/pci/cx88/Kconfig
+++ b/drivers/media/pci/cx88/Kconfig
@@ -6,7 +6,7 @@ config VIDEO_CX88
 	select VIDEOBUF_DMA_SG
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
-	select VIDEO_WM8775 if VIDEO_HELPER_CHIPS_AUTO
+	select VIDEO_WM8775 if MEDIA_SUBDRV_AUTOSELECT
 	---help---
 	  This is a video4linux driver for Conexant 2388x based
 	  TV cards.
@@ -46,23 +46,23 @@ config VIDEO_CX88_DVB
 	tristate "DVB/ATSC Support for cx2388x based TV cards"
 	depends on VIDEO_CX88 && DVB_CORE
 	select VIDEOBUF_DVB
-	select DVB_PLL if !DVB_FE_CUSTOMISE
-	select DVB_MT352 if !DVB_FE_CUSTOMISE
-	select DVB_ZL10353 if !DVB_FE_CUSTOMISE
-	select DVB_OR51132 if !DVB_FE_CUSTOMISE
-	select DVB_CX22702 if !DVB_FE_CUSTOMISE
-	select DVB_LGDT330X if !DVB_FE_CUSTOMISE
-	select DVB_NXT200X if !DVB_FE_CUSTOMISE
-	select DVB_CX24123 if !DVB_FE_CUSTOMISE
-	select DVB_ISL6421 if !DVB_FE_CUSTOMISE
-	select DVB_S5H1411 if !DVB_FE_CUSTOMISE
-	select DVB_CX24116 if !DVB_FE_CUSTOMISE
-	select DVB_STV0299 if !DVB_FE_CUSTOMISE
-	select DVB_STV0288 if !DVB_FE_CUSTOMISE
-	select DVB_STB6000 if !DVB_FE_CUSTOMISE
-	select DVB_STV0900 if !DVB_FE_CUSTOMISE
-	select DVB_STB6100 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMISE
+	select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_MT352 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_ZL10353 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_OR51132 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_CX22702 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_LGDT330X if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_NXT200X if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_CX24123 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_ISL6421 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_S5H1411 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_CX24116 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STV0288 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STB6000 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STV0900 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STB6100 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_SIMPLE if MEDIA_SUBDRV_AUTOSELECT
 	---help---
 	  This adds support for DVB/ATSC cards based on the
 	  Conexant 2388x chip.
diff --git a/drivers/media/pci/ddbridge/Kconfig b/drivers/media/pci/ddbridge/Kconfig
index d099e1a..44e5dc1 100644
--- a/drivers/media/pci/ddbridge/Kconfig
+++ b/drivers/media/pci/ddbridge/Kconfig
@@ -1,11 +1,11 @@
 config DVB_DDBRIDGE
 	tristate "Digital Devices bridge support"
 	depends on DVB_CORE && PCI && I2C
-	select DVB_LNBP21 if !DVB_FE_CUSTOMISE
-	select DVB_STV6110x if !DVB_FE_CUSTOMISE
-	select DVB_STV090x if !DVB_FE_CUSTOMISE
-	select DVB_DRXK if !DVB_FE_CUSTOMISE
-	select DVB_TDA18271C2DD if !DVB_FE_CUSTOMISE
+	select DVB_LNBP21 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STV6110x if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STV090x if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_DRXK if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TDA18271C2DD if MEDIA_SUBDRV_AUTOSELECT
 	---help---
 	  Support for cards with the Digital Devices PCI express bridge:
 	  - Octopus PCIe Bridge
diff --git a/drivers/media/pci/dm1105/Kconfig b/drivers/media/pci/dm1105/Kconfig
index f3de0a4..013df4e 100644
--- a/drivers/media/pci/dm1105/Kconfig
+++ b/drivers/media/pci/dm1105/Kconfig
@@ -1,13 +1,13 @@
 config DVB_DM1105
 	tristate "SDMC DM1105 based PCI cards"
 	depends on DVB_CORE && PCI && I2C
-	select DVB_PLL if !DVB_FE_CUSTOMISE
-	select DVB_STV0299 if !DVB_FE_CUSTOMISE
-	select DVB_STV0288 if !DVB_FE_CUSTOMISE
-	select DVB_STB6000 if !DVB_FE_CUSTOMISE
-	select DVB_CX24116 if !DVB_FE_CUSTOMISE
-	select DVB_SI21XX if !DVB_FE_CUSTOMISE
-	select DVB_DS3000 if !DVB_FE_CUSTOMISE
+	select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STV0288 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STB6000 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_CX24116 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_SI21XX if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_DS3000 if MEDIA_SUBDRV_AUTOSELECT
 	depends on RC_CORE
 	help
 	  Support for cards based on the SDMC DM1105 PCI chip like
diff --git a/drivers/media/pci/mantis/Kconfig b/drivers/media/pci/mantis/Kconfig
index a13a505..d3cc216 100644
--- a/drivers/media/pci/mantis/Kconfig
+++ b/drivers/media/pci/mantis/Kconfig
@@ -10,15 +10,15 @@ config MANTIS_CORE
 config DVB_MANTIS
 	tristate "MANTIS based cards"
 	depends on MANTIS_CORE && DVB_CORE && PCI && I2C
-	select DVB_MB86A16 if !DVB_FE_CUSTOMISE
-	select DVB_ZL10353 if !DVB_FE_CUSTOMISE
-	select DVB_STV0299 if !DVB_FE_CUSTOMISE
-	select DVB_LNBP21 if !DVB_FE_CUSTOMISE
-	select DVB_STB0899 if !DVB_FE_CUSTOMISE
-	select DVB_STB6100 if !DVB_FE_CUSTOMISE
-	select DVB_TDA665x if !DVB_FE_CUSTOMISE
-	select DVB_TDA10021 if !DVB_FE_CUSTOMISE
-	select DVB_TDA10023 if !DVB_FE_CUSTOMISE
+	select DVB_MB86A16 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_ZL10353 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_LNBP21 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STB0899 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STB6100 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TDA665x if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TDA10021 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TDA10023 if MEDIA_SUBDRV_AUTOSELECT
 	select DVB_PLL
 	help
 	  Support for PCI cards based on the Mantis PCI bridge.
@@ -29,7 +29,7 @@ config DVB_MANTIS
 config DVB_HOPPER
 	tristate "HOPPER based cards"
 	depends on MANTIS_CORE && DVB_CORE && PCI && I2C
-	select DVB_ZL10353 if !DVB_FE_CUSTOMISE
+	select DVB_ZL10353 if MEDIA_SUBDRV_AUTOSELECT
 	select DVB_PLL
 	help
 	  Support for PCI cards based on the Hopper  PCI bridge.
diff --git a/drivers/media/pci/ngene/Kconfig b/drivers/media/pci/ngene/Kconfig
index 64c8470..637d506 100644
--- a/drivers/media/pci/ngene/Kconfig
+++ b/drivers/media/pci/ngene/Kconfig
@@ -1,13 +1,13 @@
 config DVB_NGENE
 	tristate "Micronas nGene support"
 	depends on DVB_CORE && PCI && I2C
-	select DVB_LNBP21 if !DVB_FE_CUSTOMISE
-	select DVB_STV6110x if !DVB_FE_CUSTOMISE
-	select DVB_STV090x if !DVB_FE_CUSTOMISE
-	select DVB_LGDT330X if !DVB_FE_CUSTOMISE
-	select DVB_DRXK if !DVB_FE_CUSTOMISE
-	select DVB_TDA18271C2DD if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_MT2131 if !MEDIA_TUNER_CUSTOMISE
+	select DVB_LNBP21 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STV6110x if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STV090x if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_LGDT330X if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_DRXK if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TDA18271C2DD if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_MT2131 if MEDIA_SUBDRV_AUTOSELECT
 	---help---
 	  Support for Micronas PCI express cards with nGene bridge.
 
diff --git a/drivers/media/pci/saa7134/Kconfig b/drivers/media/pci/saa7134/Kconfig
index 39fc018..15b90d6 100644
--- a/drivers/media/pci/saa7134/Kconfig
+++ b/drivers/media/pci/saa7134/Kconfig
@@ -5,7 +5,7 @@ config VIDEO_SAA7134
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
 	select CRC32
-	select VIDEO_SAA6588 if VIDEO_HELPER_CHIPS_AUTO
+	select VIDEO_SAA6588 if MEDIA_SUBDRV_AUTOSELECT
 	---help---
 	  This is a video4linux driver for Philips SAA713x based
 	  TV cards.
@@ -37,25 +37,25 @@ config VIDEO_SAA7134_DVB
 	tristate "DVB/ATSC Support for saa7134 based TV cards"
 	depends on VIDEO_SAA7134 && DVB_CORE
 	select VIDEOBUF_DVB
-	select DVB_PLL if !DVB_FE_CUSTOMISE
-	select DVB_MT352 if !DVB_FE_CUSTOMISE
-	select DVB_TDA1004X if !DVB_FE_CUSTOMISE
-	select DVB_NXT200X if !DVB_FE_CUSTOMISE
-	select DVB_TDA10086 if !DVB_FE_CUSTOMISE
-	select DVB_TDA826X if !DVB_FE_CUSTOMISE
-	select DVB_ISL6421 if !DVB_FE_CUSTOMISE
-	select DVB_ISL6405 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_TDA827X if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMISE
-	select DVB_ZL10036 if !DVB_FE_CUSTOMISE
-	select DVB_MT312 if !DVB_FE_CUSTOMISE
-	select DVB_LNBP21 if !DVB_FE_CUSTOMISE
-	select DVB_ZL10353 if !DVB_FE_CUSTOMISE
-	select DVB_LGDT3305 if !DVB_FE_CUSTOMISE
-	select DVB_TDA10048 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_TDA18271 if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_TDA8290 if !MEDIA_TUNER_CUSTOMISE
-	select DVB_ZL10039 if !DVB_FE_CUSTOMISE
+	select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_MT352 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TDA1004X if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_NXT200X if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TDA10086 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TDA826X if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_ISL6421 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_ISL6405 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_TDA827X if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_SIMPLE if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_ZL10036 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_MT312 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_LNBP21 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_ZL10353 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_LGDT3305 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TDA10048 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_TDA18271 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_TDA8290 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_ZL10039 if MEDIA_SUBDRV_AUTOSELECT
 	---help---
 	  This adds support for DVB cards based on the
 	  Philips saa7134 chip.
diff --git a/drivers/media/pci/saa7146/Kconfig b/drivers/media/pci/saa7146/Kconfig
index 8923b76..da88b77 100644
--- a/drivers/media/pci/saa7146/Kconfig
+++ b/drivers/media/pci/saa7146/Kconfig
@@ -26,10 +26,10 @@ config VIDEO_MXB
 	depends on PCI && VIDEO_V4L2 && I2C
 	select VIDEO_SAA7146_VV
 	select VIDEO_TUNER
-	select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO
-	select VIDEO_TDA9840 if VIDEO_HELPER_CHIPS_AUTO
-	select VIDEO_TEA6415C if VIDEO_HELPER_CHIPS_AUTO
-	select VIDEO_TEA6420 if VIDEO_HELPER_CHIPS_AUTO
+	select VIDEO_SAA711X if MEDIA_SUBDRV_AUTOSELECT
+	select VIDEO_TDA9840 if MEDIA_SUBDRV_AUTOSELECT
+	select VIDEO_TEA6415C if MEDIA_SUBDRV_AUTOSELECT
+	select VIDEO_TEA6420 if MEDIA_SUBDRV_AUTOSELECT
 	---help---
 	  This is a video4linux driver for the 'Multimedia eXtension Board'
 	  TV card by Siemens-Nixdorf.
diff --git a/drivers/media/pci/saa7164/Kconfig b/drivers/media/pci/saa7164/Kconfig
index 3532637..8463796 100644
--- a/drivers/media/pci/saa7164/Kconfig
+++ b/drivers/media/pci/saa7164/Kconfig
@@ -6,9 +6,9 @@ config VIDEO_SAA7164
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
 	select VIDEOBUF_DVB
-	select DVB_TDA10048 if !DVB_FE_CUSTOMISE
-	select DVB_S5H1411 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_TDA18271 if !MEDIA_TUNER_CUSTOMISE
+	select DVB_TDA10048 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_S5H1411 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_TDA18271 if MEDIA_SUBDRV_AUTOSELECT
 	---help---
 	  This is a video4linux driver for NXP SAA7164 based
 	  TV cards.
diff --git a/drivers/media/pci/sta2x11/Kconfig b/drivers/media/pci/sta2x11/Kconfig
index 04a82cb..6749f67 100644
--- a/drivers/media/pci/sta2x11/Kconfig
+++ b/drivers/media/pci/sta2x11/Kconfig
@@ -1,7 +1,7 @@
 config STA2X11_VIP
 	tristate "STA2X11 VIP Video For Linux"
 	depends on STA2X11
-	select VIDEO_ADV7180 if VIDEO_HELPER_CHIPS_AUTO
+	select VIDEO_ADV7180 if MEDIA_SUBDRV_AUTOSELECT
 	select VIDEOBUF_DMA_CONTIG
 	depends on PCI && VIDEO_V4L2 && VIRT_TO_BUS
 	help
diff --git a/drivers/media/pci/ttpci/Kconfig b/drivers/media/pci/ttpci/Kconfig
index 9d83ced..314e417 100644
--- a/drivers/media/pci/ttpci/Kconfig
+++ b/drivers/media/pci/ttpci/Kconfig
@@ -9,14 +9,14 @@ config DVB_AV7110
 	select TTPCI_EEPROM
 	select VIDEO_SAA7146_VV
 	depends on VIDEO_DEV	# dependencies of VIDEO_SAA7146_VV
-	select DVB_VES1820 if !DVB_FE_CUSTOMISE
-	select DVB_VES1X93 if !DVB_FE_CUSTOMISE
-	select DVB_STV0299 if !DVB_FE_CUSTOMISE
-	select DVB_TDA8083 if !DVB_FE_CUSTOMISE
-	select DVB_SP8870 if !DVB_FE_CUSTOMISE
-	select DVB_STV0297 if !DVB_FE_CUSTOMISE
-	select DVB_L64781 if !DVB_FE_CUSTOMISE
-	select DVB_LNBP21 if !DVB_FE_CUSTOMISE
+	select DVB_VES1820 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_VES1X93 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TDA8083 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_SP8870 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STV0297 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_L64781 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_LNBP21 if MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Support for SAA7146 and AV7110 based DVB cards as produced
 	  by Fujitsu-Siemens, Technotrend, Hauppauge and others.
@@ -63,19 +63,19 @@ config DVB_BUDGET_CORE
 config DVB_BUDGET
 	tristate "Budget cards"
 	depends on DVB_BUDGET_CORE && I2C
-	select DVB_STV0299 if !DVB_FE_CUSTOMISE
-	select DVB_VES1X93 if !DVB_FE_CUSTOMISE
-	select DVB_VES1820 if !DVB_FE_CUSTOMISE
-	select DVB_L64781 if !DVB_FE_CUSTOMISE
-	select DVB_TDA8083 if !DVB_FE_CUSTOMISE
-	select DVB_S5H1420 if !DVB_FE_CUSTOMISE
-	select DVB_TDA10086 if !DVB_FE_CUSTOMISE
-	select DVB_TDA826X if !DVB_FE_CUSTOMISE
-	select DVB_LNBP21 if !DVB_FE_CUSTOMISE
-	select DVB_TDA1004X if !DVB_FE_CUSTOMISE
-	select DVB_ISL6423 if !DVB_FE_CUSTOMISE
-	select DVB_STV090x if !DVB_FE_CUSTOMISE
-	select DVB_STV6110x if !DVB_FE_CUSTOMISE
+	select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_VES1X93 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_VES1820 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_L64781 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TDA8083 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_S5H1420 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TDA10086 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TDA826X if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_LNBP21 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TDA1004X if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_ISL6423 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STV090x if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STV6110x if MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Support for simple SAA7146 based DVB cards (so called Budget-
 	  or Nova-PCI cards) without onboard MPEG2 decoder, and without
@@ -89,16 +89,16 @@ config DVB_BUDGET
 config DVB_BUDGET_CI
 	tristate "Budget cards with onboard CI connector"
 	depends on DVB_BUDGET_CORE && I2C
-	select DVB_STV0297 if !DVB_FE_CUSTOMISE
-	select DVB_STV0299 if !DVB_FE_CUSTOMISE
-	select DVB_TDA1004X if !DVB_FE_CUSTOMISE
-	select DVB_STB0899 if !DVB_FE_CUSTOMISE
-	select DVB_STB6100 if !DVB_FE_CUSTOMISE
-	select DVB_LNBP21 if !DVB_FE_CUSTOMISE
-	select DVB_STV0288 if !DVB_FE_CUSTOMISE
-	select DVB_STB6000 if !DVB_FE_CUSTOMISE
-	select DVB_TDA10023 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_TDA827X if !MEDIA_TUNER_CUSTOMISE
+	select DVB_STV0297 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TDA1004X if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STB0899 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STB6100 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_LNBP21 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STV0288 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STB6000 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TDA10023 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_TDA827X if MEDIA_SUBDRV_AUTOSELECT
 	depends on RC_CORE
 	help
 	  Support for simple SAA7146 based DVB cards
@@ -118,14 +118,14 @@ config DVB_BUDGET_AV
 	depends on DVB_BUDGET_CORE && I2C
 	select VIDEO_SAA7146_VV
 	depends on VIDEO_DEV	# dependencies of VIDEO_SAA7146_VV
-	select DVB_PLL if !DVB_FE_CUSTOMISE
-	select DVB_STV0299 if !DVB_FE_CUSTOMISE
-	select DVB_TDA1004X if !DVB_FE_CUSTOMISE
-	select DVB_TDA10021 if !DVB_FE_CUSTOMISE
-	select DVB_TDA10023 if !DVB_FE_CUSTOMISE
-	select DVB_STB0899 if !DVB_FE_CUSTOMISE
-	select DVB_TDA8261 if !DVB_FE_CUSTOMISE
-	select DVB_TUA6100 if !DVB_FE_CUSTOMISE
+	select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TDA1004X if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TDA10021 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TDA10023 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STB0899 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TDA8261 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TUA6100 if MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Support for simple SAA7146 based DVB cards
 	  (so called Budget- or Nova-PCI cards) without onboard
@@ -140,9 +140,9 @@ config DVB_BUDGET_PATCH
 	tristate "AV7110 cards with Budget Patch"
 	depends on DVB_BUDGET_CORE && I2C
 	depends on DVB_AV7110
-	select DVB_STV0299 if !DVB_FE_CUSTOMISE
-	select DVB_VES1X93 if !DVB_FE_CUSTOMISE
-	select DVB_TDA8083 if !DVB_FE_CUSTOMISE
+	select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_VES1X93 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TDA8083 if MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Support for Budget Patch (full TS) modification on
 	  SAA7146+AV7110 based cards (DVB-S cards). This
diff --git a/drivers/media/pci/zoran/Kconfig b/drivers/media/pci/zoran/Kconfig
index fd4120e..a9b2318 100644
--- a/drivers/media/pci/zoran/Kconfig
+++ b/drivers/media/pci/zoran/Kconfig
@@ -14,8 +14,8 @@ config VIDEO_ZORAN
 config VIDEO_ZORAN_DC30
 	tristate "Pinnacle/Miro DC30(+) support"
 	depends on VIDEO_ZORAN
-	select VIDEO_ADV7175 if VIDEO_HELPER_CHIPS_AUTO
-	select VIDEO_VPX3220 if VIDEO_HELPER_CHIPS_AUTO
+	select VIDEO_ADV7175 if MEDIA_SUBDRV_AUTOSELECT
+	select VIDEO_VPX3220 if MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Support for the Pinnacle/Miro DC30(+) MJPEG capture/playback
 	  card. This also supports really old DC10 cards based on the
@@ -32,16 +32,16 @@ config VIDEO_ZORAN_ZR36060
 config VIDEO_ZORAN_BUZ
 	tristate "Iomega Buz support"
 	depends on VIDEO_ZORAN_ZR36060
-	select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO
-	select VIDEO_SAA7185 if VIDEO_HELPER_CHIPS_AUTO
+	select VIDEO_SAA711X if MEDIA_SUBDRV_AUTOSELECT
+	select VIDEO_SAA7185 if MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Support for the Iomega Buz MJPEG capture/playback card.
 
 config VIDEO_ZORAN_DC10
 	tristate "Pinnacle/Miro DC10(+) support"
 	depends on VIDEO_ZORAN_ZR36060
-	select VIDEO_SAA7110 if VIDEO_HELPER_CHIPS_AUTO
-	select VIDEO_ADV7175 if VIDEO_HELPER_CHIPS_AUTO
+	select VIDEO_SAA7110 if MEDIA_SUBDRV_AUTOSELECT
+	select VIDEO_ADV7175 if MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Support for the Pinnacle/Miro DC10(+) MJPEG capture/playback
 	  card.
@@ -49,8 +49,8 @@ config VIDEO_ZORAN_DC10
 config VIDEO_ZORAN_LML33
 	tristate "Linux Media Labs LML33 support"
 	depends on VIDEO_ZORAN_ZR36060
-	select VIDEO_BT819 if VIDEO_HELPER_CHIPS_AUTO
-	select VIDEO_BT856 if VIDEO_HELPER_CHIPS_AUTO
+	select VIDEO_BT819 if MEDIA_SUBDRV_AUTOSELECT
+	select VIDEO_BT856 if MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Support for the Linux Media Labs LML33 MJPEG capture/playback
 	  card.
@@ -58,8 +58,8 @@ config VIDEO_ZORAN_LML33
 config VIDEO_ZORAN_LML33R10
 	tristate "Linux Media Labs LML33R10 support"
 	depends on VIDEO_ZORAN_ZR36060
-	select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO
-	select VIDEO_ADV7170 if VIDEO_HELPER_CHIPS_AUTO
+	select VIDEO_SAA711X if MEDIA_SUBDRV_AUTOSELECT
+	select VIDEO_ADV7170 if MEDIA_SUBDRV_AUTOSELECT
 	help
 	  support for the Linux Media Labs LML33R10 MJPEG capture/playback
 	  card.
@@ -67,8 +67,8 @@ config VIDEO_ZORAN_LML33R10
 config VIDEO_ZORAN_AVS6EYES
 	tristate "AverMedia 6 Eyes support (EXPERIMENTAL)"
 	depends on VIDEO_ZORAN_ZR36060 && EXPERIMENTAL
-	select VIDEO_BT856 if VIDEO_HELPER_CHIPS_AUTO
-	select VIDEO_BT866 if VIDEO_HELPER_CHIPS_AUTO
-	select VIDEO_KS0127 if VIDEO_HELPER_CHIPS_AUTO
+	select VIDEO_BT856 if MEDIA_SUBDRV_AUTOSELECT
+	select VIDEO_BT866 if MEDIA_SUBDRV_AUTOSELECT
+	select VIDEO_KS0127 if MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Support for the AverMedia 6 Eyes video surveillance card.
diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
index 03ae4e3..a398703 100644
--- a/drivers/media/platform/Kconfig
+++ b/drivers/media/platform/Kconfig
@@ -66,7 +66,7 @@ config VIDEO_TIMBERDALE
 config VIDEO_VINO
 	tristate "SGI Vino Video For Linux"
 	depends on I2C && SGI_IP22 && VIDEO_V4L2
-	select VIDEO_SAA7191 if VIDEO_HELPER_CHIPS_AUTO
+	select VIDEO_SAA7191 if MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Say Y here to build in support for the Vino video input system found
 	  on SGI Indy machines.
diff --git a/drivers/media/platform/davinci/Kconfig b/drivers/media/platform/davinci/Kconfig
index 52c5ca6..78e26d2 100644
--- a/drivers/media/platform/davinci/Kconfig
+++ b/drivers/media/platform/davinci/Kconfig
@@ -3,8 +3,8 @@ config VIDEO_DAVINCI_VPIF_DISPLAY
 	depends on VIDEO_DEV && (MACH_DAVINCI_DM6467_EVM || MACH_DAVINCI_DA850_EVM)
 	select VIDEOBUF2_DMA_CONTIG
 	select VIDEO_DAVINCI_VPIF
-	select VIDEO_ADV7343 if VIDEO_HELPER_CHIPS_AUTO
-	select VIDEO_THS7303 if VIDEO_HELPER_CHIPS_AUTO
+	select VIDEO_ADV7343 if MEDIA_SUBDRV_AUTOSELECT
+	select VIDEO_THS7303 if MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Enables Davinci VPIF module used for display devices.
 	  This module is common for following DM6467/DA850/OMAPL138
diff --git a/drivers/media/tuners/Kconfig b/drivers/media/tuners/Kconfig
index 94c6ff7..80238b9 100644
--- a/drivers/media/tuners/Kconfig
+++ b/drivers/media/tuners/Kconfig
@@ -18,43 +18,31 @@ config MEDIA_ATTACH
 
 	  If unsure say Y.
 
+# Analog TV tuners, auto-loaded via tuner.ko
 config MEDIA_TUNER
 	tristate
 	depends on (MEDIA_ANALOG_TV_SUPPORT || MEDIA_RADIO_SUPPORT) && I2C
 	default y
-	select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_XC5000 if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_XC4000 if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_MT20XX if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_TDA8290 if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_TEA5761 if !MEDIA_TUNER_CUSTOMISE && MEDIA_RADIO_SUPPORT && EXPERIMENTAL
-	select MEDIA_TUNER_TEA5767 if !MEDIA_TUNER_CUSTOMISE && MEDIA_RADIO_SUPPORT
-	select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_TDA9887 if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_MC44S803 if !MEDIA_TUNER_CUSTOMISE
-
-config MEDIA_TUNER_CUSTOMISE
-	bool "Customize analog and hybrid tuner modules to build"
-	depends on MEDIA_TUNER
-	default y if EXPERT
-	help
-	  This allows the user to deselect tuner drivers unnecessary
-	  for their hardware from the build. Use this option with care
-	  as deselecting tuner drivers which are in fact necessary will
-	  result in V4L/DVB devices which cannot be tuned due to lack of
-	  driver support
-
-	  If unsure say N.
+	select MEDIA_TUNER_XC2028 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_XC5000 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_XC4000 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_MT20XX if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_TDA8290 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_TEA5761 if MEDIA_SUBDRV_AUTOSELECT && MEDIA_RADIO_SUPPORT && EXPERIMENTAL
+	select MEDIA_TUNER_TEA5767 if MEDIA_SUBDRV_AUTOSELECT && MEDIA_RADIO_SUPPORT
+	select MEDIA_TUNER_SIMPLE if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_TDA9887 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_MC44S803 if MEDIA_SUBDRV_AUTOSELECT
 
 menu "Customize TV tuners"
-	visible if MEDIA_TUNER_CUSTOMISE
+	visible if !MEDIA_SUBDRV_AUTOSELECT
 	depends on MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT || MEDIA_RADIO_SUPPORT
 
 config MEDIA_TUNER_SIMPLE
 	tristate "Simple tuner support"
 	depends on MEDIA_SUPPORT && I2C
 	select MEDIA_TUNER_TDA9887
-	default m if MEDIA_TUNER_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Say Y here to include support for various simple tuners.
 
@@ -63,28 +51,28 @@ config MEDIA_TUNER_TDA8290
 	depends on MEDIA_SUPPORT && I2C
 	select MEDIA_TUNER_TDA827X
 	select MEDIA_TUNER_TDA18271
-	default m if MEDIA_TUNER_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Say Y here to include support for Philips TDA8290+8275(a) tuner.
 
 config MEDIA_TUNER_TDA827X
 	tristate "Philips TDA827X silicon tuner"
 	depends on MEDIA_SUPPORT && I2C
-	default m if MEDIA_TUNER_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A DVB-T silicon tuner module. Say Y when you want to support this tuner.
 
 config MEDIA_TUNER_TDA18271
 	tristate "NXP TDA18271 silicon tuner"
 	depends on MEDIA_SUPPORT && I2C
-	default m if MEDIA_TUNER_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A silicon tuner module. Say Y when you want to support this tuner.
 
 config MEDIA_TUNER_TDA9887
 	tristate "TDA 9885/6/7 analog IF demodulator"
 	depends on MEDIA_SUPPORT && I2C
-	default m if MEDIA_TUNER_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Say Y here to include support for Philips TDA9885/6/7
 	  analog IF demodulator.
@@ -93,70 +81,70 @@ config MEDIA_TUNER_TEA5761
 	tristate "TEA 5761 radio tuner (EXPERIMENTAL)"
 	depends on MEDIA_SUPPORT && I2C
 	depends on EXPERIMENTAL
-	default m if MEDIA_TUNER_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Say Y here to include support for the Philips TEA5761 radio tuner.
 
 config MEDIA_TUNER_TEA5767
 	tristate "TEA 5767 radio tuner"
 	depends on MEDIA_SUPPORT && I2C
-	default m if MEDIA_TUNER_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Say Y here to include support for the Philips TEA5767 radio tuner.
 
 config MEDIA_TUNER_MT20XX
 	tristate "Microtune 2032 / 2050 tuners"
 	depends on MEDIA_SUPPORT && I2C
-	default m if MEDIA_TUNER_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Say Y here to include support for the MT2032 / MT2050 tuner.
 
 config MEDIA_TUNER_MT2060
 	tristate "Microtune MT2060 silicon IF tuner"
 	depends on MEDIA_SUPPORT && I2C
-	default m if MEDIA_TUNER_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A driver for the silicon IF tuner MT2060 from Microtune.
 
 config MEDIA_TUNER_MT2063
 	tristate "Microtune MT2063 silicon IF tuner"
 	depends on MEDIA_SUPPORT && I2C
-	default m if MEDIA_TUNER_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A driver for the silicon IF tuner MT2063 from Microtune.
 
 config MEDIA_TUNER_MT2266
 	tristate "Microtune MT2266 silicon tuner"
 	depends on MEDIA_SUPPORT && I2C
-	default m if MEDIA_TUNER_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A driver for the silicon baseband tuner MT2266 from Microtune.
 
 config MEDIA_TUNER_MT2131
 	tristate "Microtune MT2131 silicon tuner"
 	depends on MEDIA_SUPPORT && I2C
-	default m if MEDIA_TUNER_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A driver for the silicon baseband tuner MT2131 from Microtune.
 
 config MEDIA_TUNER_QT1010
 	tristate "Quantek QT1010 silicon tuner"
 	depends on MEDIA_SUPPORT && I2C
-	default m if MEDIA_TUNER_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A driver for the silicon tuner QT1010 from Quantek.
 
 config MEDIA_TUNER_XC2028
 	tristate "XCeive xc2028/xc3028 tuners"
 	depends on MEDIA_SUPPORT && I2C
-	default m if MEDIA_TUNER_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Say Y here to include support for the xc2028/xc3028 tuners.
 
 config MEDIA_TUNER_XC5000
 	tristate "Xceive XC5000 silicon tuner"
 	depends on MEDIA_SUPPORT && I2C
-	default m if MEDIA_TUNER_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A driver for the silicon tuner XC5000 from Xceive.
 	  This device is only used inside a SiP called together with a
@@ -165,7 +153,7 @@ config MEDIA_TUNER_XC5000
 config MEDIA_TUNER_XC4000
 	tristate "Xceive XC4000 silicon tuner"
 	depends on MEDIA_SUPPORT && I2C
-	default m if MEDIA_TUNER_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A driver for the silicon tuner XC4000 from Xceive.
 	  This device is only used inside a SiP called together with a
@@ -174,70 +162,70 @@ config MEDIA_TUNER_XC4000
 config MEDIA_TUNER_MXL5005S
 	tristate "MaxLinear MSL5005S silicon tuner"
 	depends on MEDIA_SUPPORT && I2C
-	default m if MEDIA_TUNER_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A driver for the silicon tuner MXL5005S from MaxLinear.
 
 config MEDIA_TUNER_MXL5007T
 	tristate "MaxLinear MxL5007T silicon tuner"
 	depends on MEDIA_SUPPORT && I2C
-	default m if MEDIA_TUNER_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A driver for the silicon tuner MxL5007T from MaxLinear.
 
 config MEDIA_TUNER_MC44S803
 	tristate "Freescale MC44S803 Low Power CMOS Broadband tuners"
 	depends on MEDIA_SUPPORT && I2C
-	default m if MEDIA_TUNER_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Say Y here to support the Freescale MC44S803 based tuners
 
 config MEDIA_TUNER_MAX2165
 	tristate "Maxim MAX2165 silicon tuner"
 	depends on MEDIA_SUPPORT && I2C
-	default m if MEDIA_TUNER_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  A driver for the silicon tuner MAX2165 from Maxim.
 
 config MEDIA_TUNER_TDA18218
 	tristate "NXP TDA18218 silicon tuner"
 	depends on MEDIA_SUPPORT && I2C
-	default m if MEDIA_TUNER_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  NXP TDA18218 silicon tuner driver.
 
 config MEDIA_TUNER_FC0011
 	tristate "Fitipower FC0011 silicon tuner"
 	depends on MEDIA_SUPPORT && I2C
-	default m if MEDIA_TUNER_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Fitipower FC0011 silicon tuner driver.
 
 config MEDIA_TUNER_FC0012
 	tristate "Fitipower FC0012 silicon tuner"
 	depends on MEDIA_SUPPORT && I2C
-	default m if MEDIA_TUNER_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Fitipower FC0012 silicon tuner driver.
 
 config MEDIA_TUNER_FC0013
 	tristate "Fitipower FC0013 silicon tuner"
 	depends on MEDIA_SUPPORT && I2C
-	default m if MEDIA_TUNER_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Fitipower FC0013 silicon tuner driver.
 
 config MEDIA_TUNER_TDA18212
 	tristate "NXP TDA18212 silicon tuner"
 	depends on MEDIA_SUPPORT && I2C
-	default m if MEDIA_TUNER_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  NXP TDA18212 silicon tuner driver.
 
 config MEDIA_TUNER_TUA9001
 	tristate "Infineon TUA 9001 silicon tuner"
 	depends on MEDIA_SUPPORT && I2C
-	default m if MEDIA_TUNER_CUSTOMISE
+	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Infineon TUA 9001 silicon tuner driver.
 endmenu
diff --git a/drivers/media/usb/au0828/Kconfig b/drivers/media/usb/au0828/Kconfig
index 23f7fd2..385e557b 100644
--- a/drivers/media/usb/au0828/Kconfig
+++ b/drivers/media/usb/au0828/Kconfig
@@ -6,11 +6,11 @@ config VIDEO_AU0828
 	select I2C_ALGOBIT
 	select VIDEO_TVEEPROM
 	select VIDEOBUF_VMALLOC
-	select DVB_AU8522_DTV if !DVB_FE_CUSTOMISE
-	select DVB_AU8522_V4L if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_XC5000 if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_MXL5007T if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_TDA18271 if !MEDIA_TUNER_CUSTOMISE
+	select DVB_AU8522_DTV if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_AU8522_V4L if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_XC5000 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_MXL5007T if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_TDA18271 if MEDIA_SUBDRV_AUTOSELECT
 	---help---
 	  This is a video4linux driver for Auvitek's USB device.
 
diff --git a/drivers/media/usb/cx231xx/Kconfig b/drivers/media/usb/cx231xx/Kconfig
index 446f692..77913df 100644
--- a/drivers/media/usb/cx231xx/Kconfig
+++ b/drivers/media/usb/cx231xx/Kconfig
@@ -42,9 +42,9 @@ config VIDEO_CX231XX_DVB
 	tristate "DVB/ATSC Support for Cx231xx based TV cards"
 	depends on VIDEO_CX231XX && DVB_CORE && DVB_CAPTURE_DRIVERS
 	select VIDEOBUF_DVB
-	select MEDIA_TUNER_XC5000 if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_TDA18271 if !MEDIA_TUNER_CUSTOMISE
-	select DVB_MB86A20S if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_XC5000 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_TDA18271 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_MB86A20S if MEDIA_SUBDRV_AUTOSELECT
 
 	---help---
 	  This adds support for DVB cards based on the
diff --git a/drivers/media/usb/dvb-usb-v2/Kconfig b/drivers/media/usb/dvb-usb-v2/Kconfig
index 276374f..9671151 100644
--- a/drivers/media/usb/dvb-usb-v2/Kconfig
+++ b/drivers/media/usb/dvb-usb-v2/Kconfig
@@ -21,14 +21,14 @@ config DVB_USB_AF9015
 	tristate "Afatech AF9015 DVB-T USB2.0 support"
 	depends on DVB_USB_V2
 	select DVB_AF9013
-	select DVB_PLL              if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_MT2060   if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_QT1010   if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_TDA18271 if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_MC44S803 if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_TDA18218 if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_MXL5007T if !MEDIA_TUNER_CUSTOMISE
+	select DVB_PLL              if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_MT2060   if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_QT1010   if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_TDA18271 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_MXL5005S if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_MC44S803 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_TDA18218 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_MXL5007T if MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Say Y here to support the Afatech AF9015 based DVB-T USB2.0 receiver
 
@@ -36,26 +36,26 @@ config DVB_USB_AF9035
 	tristate "Afatech AF9035 DVB-T USB2.0 support"
 	depends on DVB_USB_V2
 	select DVB_AF9033
-	select MEDIA_TUNER_TUA9001 if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_FC0011 if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_MXL5007T if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_TDA18218 if !MEDIA_TUNER_CUSTOMISE
+	select MEDIA_TUNER_TUA9001 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_FC0011 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_MXL5007T if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_TDA18218 if MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Say Y here to support the Afatech AF9035 based DVB USB receiver.
 
 config DVB_USB_ANYSEE
 	tristate "Anysee DVB-T/C USB2.0 support"
 	depends on DVB_USB_V2
-	select DVB_PLL if !DVB_FE_CUSTOMISE
-	select DVB_MT352 if !DVB_FE_CUSTOMISE
-	select DVB_ZL10353 if !DVB_FE_CUSTOMISE
-	select DVB_TDA10023 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_TDA18212 if !MEDIA_TUNER_CUSTOMISE
-	select DVB_CX24116 if !DVB_FE_CUSTOMISE
-	select DVB_STV0900 if !DVB_FE_CUSTOMISE
-	select DVB_STV6110 if !DVB_FE_CUSTOMISE
-	select DVB_ISL6423 if !DVB_FE_CUSTOMISE
-	select DVB_CXD2820R if !DVB_FE_CUSTOMISE
+	select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_MT352 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_ZL10353 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TDA10023 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_TDA18212 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_CX24116 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STV0900 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STV6110 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_ISL6423 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_CXD2820R if MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Say Y here to support the Anysee E30, Anysee E30 Plus or
 	  Anysee E30 C Plus DVB USB2.0 receiver.
@@ -63,8 +63,8 @@ config DVB_USB_ANYSEE
 config DVB_USB_AU6610
 	tristate "Alcor Micro AU6610 USB2.0 support"
 	depends on DVB_USB_V2
-	select DVB_ZL10353 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMISE
+	select DVB_ZL10353 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_QT1010 if MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Say Y here to support the Sigmatek DVB-110 DVB-T USB2.0 receiver.
 
@@ -72,8 +72,8 @@ config DVB_USB_AZ6007
 	tristate "AzureWave 6007 and clones DVB-T/C USB2.0 support"
 	depends on DVB_USB_V2
 	select DVB_USB_CYPRESS_FIRMWARE
-	select DVB_DRXK if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_MT2063 if !DVB_FE_CUSTOMISE
+	select DVB_DRXK if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_MT2063 if MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Say Y here to support the AZ6007 receivers like Terratec H7.
 
@@ -81,7 +81,7 @@ config DVB_USB_CE6230
 	tristate "Intel CE6230 DVB-T USB2.0 support"
 	depends on DVB_USB_V2
 	select DVB_ZL10353
-	select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE
+	select MEDIA_TUNER_MXL5005S if MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Say Y here to support the Intel CE6230 DVB-T USB2.0 receiver
 
@@ -89,15 +89,15 @@ config DVB_USB_EC168
 	tristate "E3C EC168 DVB-T USB2.0 support"
 	depends on DVB_USB_V2
 	select DVB_EC100
-	select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE
+	select MEDIA_TUNER_MXL5005S if MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Say Y here to support the E3C EC168 DVB-T USB2.0 receiver.
 
 config DVB_USB_GL861
 	tristate "Genesys Logic GL861 USB2.0 support"
 	depends on DVB_USB_V2
-	select DVB_ZL10353 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMISE
+	select DVB_ZL10353 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_QT1010 if MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Say Y here to support the MSI Megasky 580 (55801) DVB-T USB2.0
 	  receiver with USB ID 0db0:5581.
@@ -112,21 +112,21 @@ config DVB_USB_IT913X
 config DVB_USB_LME2510
 	tristate "LME DM04/QQBOX DVB-S USB2.0 support"
 	depends on DVB_USB_V2
-	select DVB_TDA10086 if !DVB_FE_CUSTOMISE
-	select DVB_TDA826X if !DVB_FE_CUSTOMISE
-	select DVB_STV0288 if !DVB_FE_CUSTOMISE
-	select DVB_IX2505V if !DVB_FE_CUSTOMISE
-	select DVB_STV0299 if !DVB_FE_CUSTOMISE
-	select DVB_PLL if !DVB_FE_CUSTOMISE
-	select DVB_M88RS2000 if !DVB_FE_CUSTOMISE
+	select DVB_TDA10086 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TDA826X if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STV0288 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_IX2505V if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_M88RS2000 if MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Say Y here to support the LME DM04/QQBOX DVB-S USB2.0
 
 config DVB_USB_MXL111SF
 	tristate "MxL111SF DTV USB2.0 support"
 	depends on DVB_USB_V2
-	select DVB_LGDT3305 if !DVB_FE_CUSTOMISE
-	select DVB_LG2160 if !DVB_FE_CUSTOMISE
+	select DVB_LGDT3305 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_LG2160 if MEDIA_SUBDRV_AUTOSELECT
 	select VIDEO_TVEEPROM
 	help
 	  Say Y here to support the MxL111SF USB2.0 DTV receiver.
@@ -136,11 +136,11 @@ config DVB_USB_RTL28XXU
 	depends on DVB_USB_V2 && EXPERIMENTAL
 	select DVB_RTL2830
 	select DVB_RTL2832
-	select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_FC0012 if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_FC0013 if !MEDIA_TUNER_CUSTOMISE
+	select MEDIA_TUNER_QT1010 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_MXL5005S if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_FC0012 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_FC0013 if MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Say Y here to support the Realtek RTL28xxU DVB USB receiver.
 
diff --git a/drivers/media/usb/dvb-usb/Kconfig b/drivers/media/usb/dvb-usb/Kconfig
index 00173ee..3c5fff8 100644
--- a/drivers/media/usb/dvb-usb/Kconfig
+++ b/drivers/media/usb/dvb-usb/Kconfig
@@ -24,17 +24,17 @@ config DVB_USB_A800
 	tristate "AVerMedia AverTV DVB-T USB 2.0 (A800)"
 	depends on DVB_USB
 	select DVB_DIB3000MC
-	select DVB_PLL if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE
+	select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Say Y here to support the AVerMedia AverTV DVB-T USB 2.0 (A800) receiver.
 
 config DVB_USB_DIBUSB_MB
 	tristate "DiBcom USB DVB-T devices (based on the DiB3000M-B) (see help for device list)"
 	depends on DVB_USB
-	select DVB_PLL if !DVB_FE_CUSTOMISE
+	select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT
 	select DVB_DIB3000MB
-	select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE
+	select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Support for USB 1.1 and 2.0 DVB-T receivers based on reference designs made by
 	  DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-B demodulator.
@@ -55,7 +55,7 @@ config DVB_USB_DIBUSB_MC
 	tristate "DiBcom USB DVB-T devices (based on the DiB3000M-C/P) (see help for device list)"
 	depends on DVB_USB
 	select DVB_DIB3000MC
-	select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE
+	select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Support for USB2.0 DVB-T receivers based on reference designs made by
 	  DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-C/P demodulator.
@@ -69,20 +69,20 @@ config DVB_USB_DIBUSB_MC
 config DVB_USB_DIB0700
 	tristate "DiBcom DiB0700 USB DVB devices (see help for supported devices)"
 	depends on DVB_USB
-	select DVB_DIB7000P if !DVB_FE_CUSTOMISE
-	select DVB_DIB7000M if !DVB_FE_CUSTOMISE
-	select DVB_DIB8000 if !DVB_FE_CUSTOMISE
-	select DVB_DIB3000MC if !DVB_FE_CUSTOMISE
-	select DVB_S5H1411 if !DVB_FE_CUSTOMISE
-	select DVB_LGDT3305 if !DVB_FE_CUSTOMISE
-	select DVB_TUNER_DIB0070 if !DVB_FE_CUSTOMISE
-	select DVB_TUNER_DIB0090 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_MT2266 if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_XC5000 if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_XC4000 if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_MXL5007T if !MEDIA_TUNER_CUSTOMISE
+	select DVB_DIB7000P if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_DIB7000M if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_DIB8000 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_DIB3000MC if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_S5H1411 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_LGDT3305 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TUNER_DIB0070 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TUNER_DIB0090 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_MT2266 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_XC2028 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_XC5000 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_XC4000 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_MXL5007T if MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Support for USB2.0/1.1 DVB receivers based on the DiB0700 USB bridge. The
 	  USB bridge is also present in devices having the DiB7700 DVB-T-USB
@@ -98,29 +98,29 @@ config DVB_USB_DIB0700
 config DVB_USB_UMT_010
 	tristate "HanfTek UMT-010 DVB-T USB2.0 support"
 	depends on DVB_USB
-	select DVB_PLL if !DVB_FE_CUSTOMISE
+	select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT
 	select DVB_DIB3000MC
-	select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE
-	select DVB_MT352 if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_MT352 if MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Say Y here to support the HanfTek UMT-010 USB2.0 stick-sized DVB-T receiver.
 
 config DVB_USB_CXUSB
 	tristate "Conexant USB2.0 hybrid reference design support"
 	depends on DVB_USB
-	select DVB_PLL if !DVB_FE_CUSTOMISE
-	select DVB_CX22702 if !DVB_FE_CUSTOMISE
-	select DVB_LGDT330X if !DVB_FE_CUSTOMISE
-	select DVB_MT352 if !DVB_FE_CUSTOMISE
-	select DVB_ZL10353 if !DVB_FE_CUSTOMISE
-	select DVB_DIB7000P if !DVB_FE_CUSTOMISE
-	select DVB_TUNER_DIB0070 if !DVB_FE_CUSTOMISE
-	select DVB_ATBM8830 if !DVB_FE_CUSTOMISE
-	select DVB_LGS8GXX if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_MAX2165 if !MEDIA_TUNER_CUSTOMISE
+	select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_CX22702 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_LGDT330X if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_MT352 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_ZL10353 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_DIB7000P if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TUNER_DIB0070 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_ATBM8830 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_LGS8GXX if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_SIMPLE if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_XC2028 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_MXL5005S if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_MAX2165 if MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Say Y here to support the Conexant USB2.0 hybrid reference design.
 	  Currently, only DVB and ATSC modes are supported, analog mode
@@ -132,11 +132,11 @@ config DVB_USB_CXUSB
 config DVB_USB_M920X
 	tristate "Uli m920x DVB-T USB2.0 support"
 	depends on DVB_USB
-	select DVB_MT352 if !DVB_FE_CUSTOMISE
-	select DVB_TDA1004X if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_TDA827X if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMISE
+	select DVB_MT352 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TDA1004X if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_QT1010 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_TDA827X if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_SIMPLE if MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Say Y here to support the MSI Mega Sky 580 USB2.0 DVB-T receiver.
 	  Currently, only devices with a product id of
@@ -146,9 +146,9 @@ config DVB_USB_M920X
 config DVB_USB_DIGITV
 	tristate "Nebula Electronics uDigiTV DVB-T USB2.0 support"
 	depends on DVB_USB
-	select DVB_PLL if !DVB_FE_CUSTOMISE
-	select DVB_NXT6000 if !DVB_FE_CUSTOMISE
-	select DVB_MT352 if !DVB_FE_CUSTOMISE
+	select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_NXT6000 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_MT352 if MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Say Y here to support the Nebula Electronics uDigitV USB2.0 DVB-T receiver.
 
@@ -191,17 +191,17 @@ config DVB_USB_NOVA_T_USB2
 	tristate "Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 support"
 	depends on DVB_USB
 	select DVB_DIB3000MC
-	select DVB_PLL if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE
+	select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Say Y here to support the Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 receiver.
 
 config DVB_USB_TTUSB2
 	tristate "Pinnacle 400e DVB-S USB2.0 support"
 	depends on DVB_USB
-	select DVB_TDA10086 if !DVB_FE_CUSTOMISE
-	select DVB_LNBP21 if !DVB_FE_CUSTOMISE
-	select DVB_TDA826X if !DVB_FE_CUSTOMISE
+	select DVB_TDA10086 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_LNBP21 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TDA826X if MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Say Y here to support the Pinnacle 400e DVB-S USB2.0 receiver. The
 	  firmware protocol used by this module is similar to the one used by the
@@ -220,16 +220,16 @@ config DVB_USB_DTT200U
 config DVB_USB_OPERA1
 	tristate "Opera1 DVB-S USB2.0 receiver"
 	depends on DVB_USB
-	select DVB_STV0299 if !DVB_FE_CUSTOMISE
-	select DVB_PLL if !DVB_FE_CUSTOMISE
+	select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Say Y here to support the Opera DVB-S USB2.0 receiver.
 
 config DVB_USB_AF9005
 	tristate "Afatech AF9005 DVB-T USB1.1 support"
 	depends on DVB_USB && EXPERIMENTAL
-	select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMISE
+	select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_QT1010 if MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Say Y here to support the Afatech AF9005 based DVB-T USB1.1 receiver
 	  and the TerraTec Cinergy T USB XE (Rev.1)
@@ -245,9 +245,9 @@ config DVB_USB_PCTV452E
 	tristate "Pinnacle PCTV HDTV Pro USB device/TT Connect S2-3600"
 	depends on DVB_USB
 	select TTPCI_EEPROM
-	select DVB_LNBP22 if !DVB_FE_CUSTOMISE
-	select DVB_STB0899 if !DVB_FE_CUSTOMISE
-	select DVB_STB6100 if !DVB_FE_CUSTOMISE
+	select DVB_LNBP22 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STB0899 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STB6100 if MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Support for external USB adapter designed by Pinnacle,
 	  shipped under the brand name 'PCTV HDTV Pro USB'.
@@ -257,19 +257,19 @@ config DVB_USB_PCTV452E
 config DVB_USB_DW2102
 	tristate "DvbWorld & TeVii DVB-S/S2 USB2.0 support"
 	depends on DVB_USB
-	select DVB_PLL if !DVB_FE_CUSTOMISE
-	select DVB_STV0299 if !DVB_FE_CUSTOMISE
-	select DVB_STV0288 if !DVB_FE_CUSTOMISE
-	select DVB_STB6000 if !DVB_FE_CUSTOMISE
-	select DVB_CX24116 if !DVB_FE_CUSTOMISE
-	select DVB_SI21XX if !DVB_FE_CUSTOMISE
-	select DVB_TDA10023 if !DVB_FE_CUSTOMISE
-	select DVB_MT312 if !DVB_FE_CUSTOMISE
-	select DVB_ZL10039 if !DVB_FE_CUSTOMISE
-	select DVB_DS3000 if !DVB_FE_CUSTOMISE
-	select DVB_STB6100 if !DVB_FE_CUSTOMISE
-	select DVB_STV6110 if !DVB_FE_CUSTOMISE
-	select DVB_STV0900 if !DVB_FE_CUSTOMISE
+	select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STV0288 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STB6000 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_CX24116 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_SI21XX if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TDA10023 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_MT312 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_ZL10039 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_DS3000 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STB6100 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STV6110 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STV0900 if MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Say Y here to support the DvbWorld, TeVii, Prof DVB-S/S2 USB2.0
 	  receivers.
@@ -285,8 +285,8 @@ config DVB_USB_CINERGY_T2
 config DVB_USB_DTV5100
 	tristate "AME DTV-5100 USB2.0 DVB-T support"
 	depends on DVB_USB
-	select DVB_ZL10353 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMISE
+	select DVB_ZL10353 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_QT1010 if MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Say Y here to support the AME DTV-5100 USB2.0 DVB-T receiver.
 
@@ -299,15 +299,15 @@ config DVB_USB_FRIIO
 config DVB_USB_AZ6027
 	tristate "Azurewave DVB-S/S2 USB2.0 AZ6027 support"
 	depends on DVB_USB
-	select DVB_STB0899 if !DVB_FE_CUSTOMISE
-	select DVB_STB6100 if !DVB_FE_CUSTOMISE
+	select DVB_STB0899 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STB6100 if MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Say Y here to support the AZ6027 device
 
 config DVB_USB_TECHNISAT_USB2
 	tristate "Technisat DVB-S/S2 USB2.0 support"
 	depends on DVB_USB
-	select DVB_STV090x if !DVB_FE_CUSTOMISE
-	select DVB_STV6110x if !DVB_FE_CUSTOMISE
+	select DVB_STV090x if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STV6110x if MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Say Y here to support the Technisat USB2 DVB-S/S2 device
diff --git a/drivers/media/usb/em28xx/Kconfig b/drivers/media/usb/em28xx/Kconfig
index 928ef0d..7a5bd61 100644
--- a/drivers/media/usb/em28xx/Kconfig
+++ b/drivers/media/usb/em28xx/Kconfig
@@ -4,10 +4,10 @@ config VIDEO_EM28XX
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
 	select VIDEOBUF_VMALLOC
-	select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO
-	select VIDEO_TVP5150 if VIDEO_HELPER_CHIPS_AUTO
-	select VIDEO_MSP3400 if VIDEO_HELPER_CHIPS_AUTO
-	select VIDEO_MT9V011 if VIDEO_HELPER_CHIPS_AUTO
+	select VIDEO_SAA711X if MEDIA_SUBDRV_AUTOSELECT
+	select VIDEO_TVP5150 if MEDIA_SUBDRV_AUTOSELECT
+	select VIDEO_MSP3400 if MEDIA_SUBDRV_AUTOSELECT
+	select VIDEO_MT9V011 if MEDIA_SUBDRV_AUTOSELECT
 
 	---help---
 	  This is a video4linux driver for Empia 28xx based TV cards.
@@ -33,16 +33,16 @@ config VIDEO_EM28XX_ALSA
 config VIDEO_EM28XX_DVB
 	tristate "DVB/ATSC Support for em28xx based TV cards"
 	depends on VIDEO_EM28XX && DVB_CORE
-	select DVB_LGDT330X if !DVB_FE_CUSTOMISE
-	select DVB_ZL10353 if !DVB_FE_CUSTOMISE
-	select DVB_TDA10023 if !DVB_FE_CUSTOMISE
-	select DVB_S921 if !DVB_FE_CUSTOMISE
-	select DVB_DRXD if !DVB_FE_CUSTOMISE
-	select DVB_CXD2820R if !DVB_FE_CUSTOMISE
-	select DVB_DRXK if !DVB_FE_CUSTOMISE
-	select DVB_TDA18271C2DD if !DVB_FE_CUSTOMISE
-	select DVB_TDA10071 if !DVB_FE_CUSTOMISE
-	select DVB_A8293 if !DVB_FE_CUSTOMISE
+	select DVB_LGDT330X if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_ZL10353 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TDA10023 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_S921 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_DRXD if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_CXD2820R if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_DRXK if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TDA18271C2DD if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TDA10071 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_A8293 if MEDIA_SUBDRV_AUTOSELECT
 	select VIDEOBUF_DVB
 	---help---
 	  This adds support for DVB cards based on the
diff --git a/drivers/media/usb/pvrusb2/Kconfig b/drivers/media/usb/pvrusb2/Kconfig
index 25e412e..32b11c1 100644
--- a/drivers/media/usb/pvrusb2/Kconfig
+++ b/drivers/media/usb/pvrusb2/Kconfig
@@ -36,13 +36,13 @@ config VIDEO_PVRUSB2_DVB
 	bool "pvrusb2 ATSC/DVB support (EXPERIMENTAL)"
 	default y
 	depends on VIDEO_PVRUSB2 && DVB_CORE && EXPERIMENTAL
-	select DVB_LGDT330X if !DVB_FE_CUSTOMISE
-	select DVB_S5H1409 if !DVB_FE_CUSTOMISE
-	select DVB_S5H1411 if !DVB_FE_CUSTOMISE
-	select DVB_TDA10048 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_TDA18271 if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_TDA8290 if !MEDIA_TUNER_CUSTOMISE
+	select DVB_LGDT330X if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_S5H1409 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_S5H1411 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TDA10048 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_TDA18271 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_SIMPLE if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_TDA8290 if MEDIA_SUBDRV_AUTOSELECT
 	---help---
 
 	  This option enables a DVB interface for the pvrusb2 driver.
diff --git a/drivers/media/usb/ttusb-budget/Kconfig b/drivers/media/usb/ttusb-budget/Kconfig
index 2663ae3..97bad7d 100644
--- a/drivers/media/usb/ttusb-budget/Kconfig
+++ b/drivers/media/usb/ttusb-budget/Kconfig
@@ -1,13 +1,13 @@
 config DVB_TTUSB_BUDGET
 	tristate "Technotrend/Hauppauge Nova-USB devices"
 	depends on DVB_CORE && USB && I2C && PCI
-	select DVB_CX22700 if !DVB_FE_CUSTOMISE
-	select DVB_TDA1004X if !DVB_FE_CUSTOMISE
-	select DVB_VES1820 if !DVB_FE_CUSTOMISE
-	select DVB_TDA8083 if !DVB_FE_CUSTOMISE
-	select DVB_STV0299 if !DVB_FE_CUSTOMISE
-	select DVB_STV0297 if !DVB_FE_CUSTOMISE
-	select DVB_LNBP21 if !DVB_FE_CUSTOMISE
+	select DVB_CX22700 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TDA1004X if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_VES1820 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TDA8083 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STV0297 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_LNBP21 if MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Support for external USB adapters designed by Technotrend and
 	  produced by Hauppauge, shipped under the brand name 'Nova-USB'.
diff --git a/drivers/media/usb/usbvision/Kconfig b/drivers/media/usb/usbvision/Kconfig
index fc24ef0..6b6afc5 100644
--- a/drivers/media/usb/usbvision/Kconfig
+++ b/drivers/media/usb/usbvision/Kconfig
@@ -2,7 +2,7 @@ config VIDEO_USBVISION
 	tristate "USB video devices based on Nogatech NT1003/1004/1005"
 	depends on I2C && VIDEO_V4L2
 	select VIDEO_TUNER
-	select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO
+	select VIDEO_SAA711X if MEDIA_SUBDRV_AUTOSELECT
 	---help---
 	  There are more than 50 different USB video devices based on
 	  NT1003/1004/1005 USB Bridges. This driver enables using those
