| Message ID | 1347614272-24878-1-git-send-email-prabhakar.lad@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Prabhakar, Thanks for the patch. On Friday 14 September 2012 14:47:52 Prabhakar Lad wrote: > From: Lad, Prabhakar <prabhakar.lad@ti.com> > > due to structure change for video drivers, change the > description with correct path. > > Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> > Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> > Cc: Mauro Carvalho Chehab <mchehab@infradead.org> > Cc: Hans Verkuil <hans.verkuil@cisco.com> > Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > Cc: Sakari Ailus <sakari.ailus@iki.fi> > Cc: Rob Landley <rob@landley.net> For the omap3isp part and the V4L2 core, Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > --- > Documentation/video4linux/CQcam.txt | 2 +- > Documentation/video4linux/README.davinci-vpbe | 20 ++++++++++---------- > Documentation/video4linux/fimc.txt | 16 ++++++++-------- > Documentation/video4linux/omap3isp.txt | 2 +- > Documentation/video4linux/v4l2-framework.txt | 2 +- > Documentation/video4linux/videobuf | 2 +- > 6 files changed, 22 insertions(+), 22 deletions(-) > > diff --git a/Documentation/video4linux/CQcam.txt > b/Documentation/video4linux/CQcam.txt index 6e680fe..0b69e4e 100644 > --- a/Documentation/video4linux/CQcam.txt > +++ b/Documentation/video4linux/CQcam.txt > @@ -18,7 +18,7 @@ Table of Contents > > 1.0 Introduction > > - The file ../../drivers/media/video/c-qcam.c is a device driver for > + The file ../../drivers/media/parport/c-qcam.c is a device driver for > the Logitech (nee Connectix) parallel port interface color CCD camera. > This is a fairly inexpensive device for capturing images. Logitech > does not currently provide information for developers, but many people > diff --git a/Documentation/video4linux/README.davinci-vpbe > b/Documentation/video4linux/README.davinci-vpbe index 7a460b0..dc9a297 > 100644 > --- a/Documentation/video4linux/README.davinci-vpbe > +++ b/Documentation/video4linux/README.davinci-vpbe > @@ -5,22 +5,22 @@ > File partitioning > ----------------- > V4L2 display device driver > - drivers/media/video/davinci/vpbe_display.c > - drivers/media/video/davinci/vpbe_display.h > + drivers/media/platform/davinci/vpbe_display.c > + drivers/media/platform/davinci/vpbe_display.h > > VPBE display controller > - drivers/media/video/davinci/vpbe.c > - drivers/media/video/davinci/vpbe.h > + drivers/media/platform/davinci/vpbe.c > + drivers/media/platform/davinci/vpbe.h > > VPBE venc sub device driver > - drivers/media/video/davinci/vpbe_venc.c > - drivers/media/video/davinci/vpbe_venc.h > - drivers/media/video/davinci/vpbe_venc_regs.h > + drivers/media/platform/davinci/vpbe_venc.c > + drivers/media/platform/davinci/vpbe_venc.h > + drivers/media/platform/davinci/vpbe_venc_regs.h > > VPBE osd driver > - drivers/media/video/davinci/vpbe_osd.c > - drivers/media/video/davinci/vpbe_osd.h > - drivers/media/video/davinci/vpbe_osd_regs.h > + drivers/media/platform/davinci/vpbe_osd.c > + drivers/media/platform/davinci/vpbe_osd.h > + drivers/media/platform/davinci/vpbe_osd_regs.h > > Functional partitioning > ----------------------- > diff --git a/Documentation/video4linux/fimc.txt > b/Documentation/video4linux/fimc.txt index eb04970..fd02d9a 100644 > --- a/Documentation/video4linux/fimc.txt > +++ b/Documentation/video4linux/fimc.txt > @@ -10,7 +10,7 @@ data from LCD controller (FIMD) through the SoC internal > writeback data path. There are multiple FIMC instances in the SoCs (up to > 4), having slightly different capabilities, like pixel alignment > constraints, rotator availability, LCD writeback support, etc. The driver > is located at -drivers/media/video/s5p-fimc directory. > +drivers/media/platform/s5p-fimc directory. > > 1. Supported SoCs > ================= > @@ -36,21 +36,21 @@ Not currently supported: > ===================== > > - media device driver > - drivers/media/video/s5p-fimc/fimc-mdevice.[ch] > + drivers/media/platform/s5p-fimc/fimc-mdevice.[ch] > > - camera capture video device driver > - drivers/media/video/s5p-fimc/fimc-capture.c > + drivers/media/platform/s5p-fimc/fimc-capture.c > > - MIPI-CSI2 receiver subdev > - drivers/media/video/s5p-fimc/mipi-csis.[ch] > + drivers/media/platform/s5p-fimc/mipi-csis.[ch] > > - video post-processor (mem-to-mem) > - drivers/media/video/s5p-fimc/fimc-core.c > + drivers/media/platform/s5p-fimc/fimc-core.c > > - common files > - drivers/media/video/s5p-fimc/fimc-core.h > - drivers/media/video/s5p-fimc/fimc-reg.h > - drivers/media/video/s5p-fimc/regs-fimc.h > + drivers/media/platform/s5p-fimc/fimc-core.h > + drivers/media/platform/s5p-fimc/fimc-reg.h > + drivers/media/platform/s5p-fimc/regs-fimc.h > > 4. User space interfaces > ======================== > diff --git a/Documentation/video4linux/omap3isp.txt > b/Documentation/video4linux/omap3isp.txt index 5dd1439..b9a9f83 100644 > --- a/Documentation/video4linux/omap3isp.txt > +++ b/Documentation/video4linux/omap3isp.txt > @@ -12,7 +12,7 @@ Introduction > ============ > > This file documents the Texas Instruments OMAP 3 Image Signal Processor > (ISP) -driver located under drivers/media/video/omap3isp. The original > driver was +driver located under drivers/media/platform/omap3isp. The > original driver was written by Texas Instruments but since that it has been > rewritten (twice) at Nokia. > > diff --git a/Documentation/video4linux/v4l2-framework.txt > b/Documentation/video4linux/v4l2-framework.txt index 89318be..e7006ca > 100644 > --- a/Documentation/video4linux/v4l2-framework.txt > +++ b/Documentation/video4linux/v4l2-framework.txt > @@ -1054,4 +1054,4 @@ The first event type in the class is reserved for > future use, so the first available event type is 'class base + 1'. > > An example on how the V4L2 events may be used can be found in the OMAP > -3 ISP driver (drivers/media/video/omap3isp). > +3 ISP driver (drivers/media/platform/omap3isp). > diff --git a/Documentation/video4linux/videobuf > b/Documentation/video4linux/videobuf index 1d00d7f..3ffe9e9 100644 > --- a/Documentation/video4linux/videobuf > +++ b/Documentation/video4linux/videobuf > @@ -349,7 +349,7 @@ again. > Developers who are interested in more information can go into the relevant > header files; there are a few low-level functions declared there which have > not been talked about here. Also worthwhile is the vivi driver > -(drivers/media/video/vivi.c), which is maintained as an example of how V4L2 > +(drivers/media/platform/vivi.c), which is maintained as an example of how > V4L2 drivers should be written. Vivi only uses the vmalloc() API, but it's > good enough to get started with. Note also that all of these calls are > exported GPL-only, so they will not be available to non-GPL kernel modules.
diff --git a/Documentation/video4linux/CQcam.txt b/Documentation/video4linux/CQcam.txt index 6e680fe..0b69e4e 100644 --- a/Documentation/video4linux/CQcam.txt +++ b/Documentation/video4linux/CQcam.txt @@ -18,7 +18,7 @@ Table of Contents 1.0 Introduction - The file ../../drivers/media/video/c-qcam.c is a device driver for + The file ../../drivers/media/parport/c-qcam.c is a device driver for the Logitech (nee Connectix) parallel port interface color CCD camera. This is a fairly inexpensive device for capturing images. Logitech does not currently provide information for developers, but many people diff --git a/Documentation/video4linux/README.davinci-vpbe b/Documentation/video4linux/README.davinci-vpbe index 7a460b0..dc9a297 100644 --- a/Documentation/video4linux/README.davinci-vpbe +++ b/Documentation/video4linux/README.davinci-vpbe @@ -5,22 +5,22 @@ File partitioning ----------------- V4L2 display device driver - drivers/media/video/davinci/vpbe_display.c - drivers/media/video/davinci/vpbe_display.h + drivers/media/platform/davinci/vpbe_display.c + drivers/media/platform/davinci/vpbe_display.h VPBE display controller - drivers/media/video/davinci/vpbe.c - drivers/media/video/davinci/vpbe.h + drivers/media/platform/davinci/vpbe.c + drivers/media/platform/davinci/vpbe.h VPBE venc sub device driver - drivers/media/video/davinci/vpbe_venc.c - drivers/media/video/davinci/vpbe_venc.h - drivers/media/video/davinci/vpbe_venc_regs.h + drivers/media/platform/davinci/vpbe_venc.c + drivers/media/platform/davinci/vpbe_venc.h + drivers/media/platform/davinci/vpbe_venc_regs.h VPBE osd driver - drivers/media/video/davinci/vpbe_osd.c - drivers/media/video/davinci/vpbe_osd.h - drivers/media/video/davinci/vpbe_osd_regs.h + drivers/media/platform/davinci/vpbe_osd.c + drivers/media/platform/davinci/vpbe_osd.h + drivers/media/platform/davinci/vpbe_osd_regs.h Functional partitioning ----------------------- diff --git a/Documentation/video4linux/fimc.txt b/Documentation/video4linux/fimc.txt index eb04970..fd02d9a 100644 --- a/Documentation/video4linux/fimc.txt +++ b/Documentation/video4linux/fimc.txt @@ -10,7 +10,7 @@ data from LCD controller (FIMD) through the SoC internal writeback data path. There are multiple FIMC instances in the SoCs (up to 4), having slightly different capabilities, like pixel alignment constraints, rotator availability, LCD writeback support, etc. The driver is located at -drivers/media/video/s5p-fimc directory. +drivers/media/platform/s5p-fimc directory. 1. Supported SoCs ================= @@ -36,21 +36,21 @@ Not currently supported: ===================== - media device driver - drivers/media/video/s5p-fimc/fimc-mdevice.[ch] + drivers/media/platform/s5p-fimc/fimc-mdevice.[ch] - camera capture video device driver - drivers/media/video/s5p-fimc/fimc-capture.c + drivers/media/platform/s5p-fimc/fimc-capture.c - MIPI-CSI2 receiver subdev - drivers/media/video/s5p-fimc/mipi-csis.[ch] + drivers/media/platform/s5p-fimc/mipi-csis.[ch] - video post-processor (mem-to-mem) - drivers/media/video/s5p-fimc/fimc-core.c + drivers/media/platform/s5p-fimc/fimc-core.c - common files - drivers/media/video/s5p-fimc/fimc-core.h - drivers/media/video/s5p-fimc/fimc-reg.h - drivers/media/video/s5p-fimc/regs-fimc.h + drivers/media/platform/s5p-fimc/fimc-core.h + drivers/media/platform/s5p-fimc/fimc-reg.h + drivers/media/platform/s5p-fimc/regs-fimc.h 4. User space interfaces ======================== diff --git a/Documentation/video4linux/omap3isp.txt b/Documentation/video4linux/omap3isp.txt index 5dd1439..b9a9f83 100644 --- a/Documentation/video4linux/omap3isp.txt +++ b/Documentation/video4linux/omap3isp.txt @@ -12,7 +12,7 @@ Introduction ============ This file documents the Texas Instruments OMAP 3 Image Signal Processor (ISP) -driver located under drivers/media/video/omap3isp. The original driver was +driver located under drivers/media/platform/omap3isp. The original driver was written by Texas Instruments but since that it has been rewritten (twice) at Nokia. diff --git a/Documentation/video4linux/v4l2-framework.txt b/Documentation/video4linux/v4l2-framework.txt index 89318be..e7006ca 100644 --- a/Documentation/video4linux/v4l2-framework.txt +++ b/Documentation/video4linux/v4l2-framework.txt @@ -1054,4 +1054,4 @@ The first event type in the class is reserved for future use, so the first available event type is 'class base + 1'. An example on how the V4L2 events may be used can be found in the OMAP -3 ISP driver (drivers/media/video/omap3isp). +3 ISP driver (drivers/media/platform/omap3isp). diff --git a/Documentation/video4linux/videobuf b/Documentation/video4linux/videobuf index 1d00d7f..3ffe9e9 100644 --- a/Documentation/video4linux/videobuf +++ b/Documentation/video4linux/videobuf @@ -349,7 +349,7 @@ again. Developers who are interested in more information can go into the relevant header files; there are a few low-level functions declared there which have not been talked about here. Also worthwhile is the vivi driver -(drivers/media/video/vivi.c), which is maintained as an example of how V4L2 +(drivers/media/platform/vivi.c), which is maintained as an example of how V4L2 drivers should be written. Vivi only uses the vmalloc() API, but it's good enough to get started with. Note also that all of these calls are exported GPL-only, so they will not be available to non-GPL kernel modules.