[1/2] omap3isp: Prepare/unprepare clocks before/after enable/disable

Commit Message

Laurent Pinchart Oct. 25, 2012, 9:39 p.m. UTC

Clock enable (disable) is split in two operations, prepare and enable
(disable and unprepare). Perform both when enabling/disabling the ISP
clocks.

Signed-off-by: Laurent Pinchart <[e-mail]>
---
 drivers/media/platform/omap3isp/isp.c |   25 +++++++++++++------------
 1 files changed, 13 insertions(+), 12 deletions(-)

Comments

Sakari Ailus Oct. 25, 2012, 9:45 p.m. UTC | #1

Hi Laurent,

On Thu, Oct 25, 2012 at 11:39:42PM +0200, Laurent Pinchart wrote:
> Clock enable (disable) is split in two operations, prepare and enable
> (disable and unprepare). Perform both when enabling/disabling the ISP
> clocks.
> 
> Signed-off-by: Laurent Pinchart <[e-mail]>
> ---
>  drivers/media/platform/omap3isp/isp.c |   25 +++++++++++++------------
>  1 files changed, 13 insertions(+), 12 deletions(-)

Thanks for the patch!

Acked-by: Sakari Ailus <[e-mail]>

Patch

diff --git a/drivers/media/platform/omap3isp/isp.c b/drivers/media/platform/omap3isp/isp.c
index e8e724e..7da622e 100644
--- a/drivers/media/platform/omap3isp/isp.c
+++ b/drivers/media/platform/omap3isp/isp.c
@@ -1332,7 +1332,8 @@  void omap3isp_subclk_disable(struct isp_device *isp,
  * isp_enable_clocks - Enable ISP clocks
  * @isp: OMAP3 ISP device
  *
- * Return 0 if successful, or clk_enable return value if any of tthem fails.
+ * Return 0 if successful, or clk_prepare_enable return value if any of them
+ * fails.
  */
 static int isp_enable_clocks(struct isp_device *isp)
 {
@@ -1354,9 +1355,9 @@  static int isp_enable_clocks(struct isp_device *isp)
 	else
 		divisor = 2;
 
-	r = clk_enable(isp->clock[ISP_CLK_CAM_ICK]);
+	r = clk_prepare_enable(isp->clock[ISP_CLK_CAM_ICK]);
 	if (r) {
-		dev_err(isp->dev, "clk_enable cam_ick failed\n");
+		dev_err(isp->dev, "failed to enable cam_ick clock\n");
 		goto out_clk_enable_ick;
 	}
 	r = clk_set_rate(isp->clock[ISP_CLK_DPLL4_M5_CK],
@@ -1365,9 +1366,9 @@  static int isp_enable_clocks(struct isp_device *isp)
 		dev_err(isp->dev, "clk_set_rate for dpll4_m5_ck failed\n");
 		goto out_clk_enable_mclk;
 	}
-	r = clk_enable(isp->clock[ISP_CLK_CAM_MCLK]);
+	r = clk_prepare_enable(isp->clock[ISP_CLK_CAM_MCLK]);
 	if (r) {
-		dev_err(isp->dev, "clk_enable cam_mclk failed\n");
+		dev_err(isp->dev, "failed to enable cam_mclk clock\n");
 		goto out_clk_enable_mclk;
 	}
 	rate = clk_get_rate(isp->clock[ISP_CLK_CAM_MCLK]);
@@ -1375,17 +1376,17 @@  static int isp_enable_clocks(struct isp_device *isp)
 		dev_warn(isp->dev, "unexpected cam_mclk rate:\n"
 				   " expected : %d\n"
 				   " actual   : %ld\n", CM_CAM_MCLK_HZ, rate);
-	r = clk_enable(isp->clock[ISP_CLK_CSI2_FCK]);
+	r = clk_prepare_enable(isp->clock[ISP_CLK_CSI2_FCK]);
 	if (r) {
-		dev_err(isp->dev, "clk_enable csi2_fck failed\n");
+		dev_err(isp->dev, "failed to enable csi2_fck clock\n");
 		goto out_clk_enable_csi2_fclk;
 	}
 	return 0;
 
 out_clk_enable_csi2_fclk:
-	clk_disable(isp->clock[ISP_CLK_CAM_MCLK]);
+	clk_disable_unprepare(isp->clock[ISP_CLK_CAM_MCLK]);
 out_clk_enable_mclk:
-	clk_disable(isp->clock[ISP_CLK_CAM_ICK]);
+	clk_disable_unprepare(isp->clock[ISP_CLK_CAM_ICK]);
 out_clk_enable_ick:
 	return r;
 }
@@ -1396,9 +1397,9 @@  out_clk_enable_ick:
  */
 static void isp_disable_clocks(struct isp_device *isp)
 {
-	clk_disable(isp->clock[ISP_CLK_CAM_ICK]);
-	clk_disable(isp->clock[ISP_CLK_CAM_MCLK]);
-	clk_disable(isp->clock[ISP_CLK_CSI2_FCK]);
+	clk_disable_unprepare(isp->clock[ISP_CLK_CAM_ICK]);
+	clk_disable_unprepare(isp->clock[ISP_CLK_CAM_MCLK]);
+	clk_disable_unprepare(isp->clock[ISP_CLK_CSI2_FCK]);
 }
 
 static const char *isp_clocks[] = {