diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
index 181c768..36bcad3 100644
--- a/drivers/media/platform/Kconfig
+++ b/drivers/media/platform/Kconfig
@@ -90,13 +90,6 @@ config VIDEO_M32R_AR_M64278
 	  To compile this driver as a module, choose M here: the
 	  module will be called arv.
 
-config VIDEO_OMAP2
-	tristate "OMAP2 Camera Capture Interface driver"
-	depends on VIDEO_DEV && ARCH_OMAP2
-	select VIDEOBUF_DMA_SG
-	---help---
-	  This is a v4l2 driver for the TI OMAP2 camera capture interface
-
 config VIDEO_OMAP3
 	tristate "OMAP 3 Camera support (EXPERIMENTAL)"
 	depends on OMAP_IOVMM && VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API && ARCH_OMAP3 && EXPERIMENTAL
diff --git a/drivers/media/platform/Makefile b/drivers/media/platform/Makefile
index baaa550..7228278 100644
--- a/drivers/media/platform/Makefile
+++ b/drivers/media/platform/Makefile
@@ -2,8 +2,6 @@
 # Makefile for the video capture/playback device drivers.
 #
 
-omap2cam-objs	:=	omap24xxcam.o omap24xxcam-dma.o
-
 obj-$(CONFIG_VIDEO_VINO) += indycam.o
 obj-$(CONFIG_VIDEO_VINO) += vino.o
 
@@ -14,7 +12,6 @@ obj-$(CONFIG_VIDEO_VIA_CAMERA) += via-camera.o
 obj-$(CONFIG_VIDEO_CAFE_CCIC) += marvell-ccic/
 obj-$(CONFIG_VIDEO_MMP_CAMERA) += marvell-ccic/
 
-obj-$(CONFIG_VIDEO_OMAP2)		+= omap2cam.o
 obj-$(CONFIG_VIDEO_OMAP3)	+= omap3isp/
 
 obj-$(CONFIG_VIDEO_VIU) += fsl-viu.o
diff --git a/drivers/media/platform/omap24xxcam-dma.c b/drivers/media/platform/omap24xxcam-dma.c
deleted file mode 100644
index 9c00776..0000000
--- a/drivers/media/platform/omap24xxcam-dma.c
+++ /dev/null
@@ -1,601 +0,0 @@
-/*
- * drivers/media/platform/omap24xxcam-dma.c
- *
- * Copyright (C) 2004 MontaVista Software, Inc.
- * Copyright (C) 2004 Texas Instruments.
- * Copyright (C) 2007 Nokia Corporation.
- *
- * Contact: Sakari Ailus <sakari.ailus@nokia.com>
- *
- * Based on code from Andy Lowe <source@mvista.com> and
- *                    David Cohen <david.cohen@indt.org.br>.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/scatterlist.h>
-
-#include "omap24xxcam.h"
-
-/*
- *
- * DMA hardware.
- *
- */
-
-/* Ack all interrupt on CSR and IRQSTATUS_L0 */
-static void omap24xxcam_dmahw_ack_all(void __iomem *base)
-{
-	u32 csr;
-	int i;
-
-	for (i = 0; i < NUM_CAMDMA_CHANNELS; ++i) {
-		csr = omap24xxcam_reg_in(base, CAMDMA_CSR(i));
-		/* ack interrupt in CSR */
-		omap24xxcam_reg_out(base, CAMDMA_CSR(i), csr);
-	}
-	omap24xxcam_reg_out(base, CAMDMA_IRQSTATUS_L0, 0xf);
-}
-
-/* Ack dmach on CSR and IRQSTATUS_L0 */
-static u32 omap24xxcam_dmahw_ack_ch(void __iomem *base, int dmach)
-{
-	u32 csr;
-
-	csr = omap24xxcam_reg_in(base, CAMDMA_CSR(dmach));
-	/* ack interrupt in CSR */
-	omap24xxcam_reg_out(base, CAMDMA_CSR(dmach), csr);
-	/* ack interrupt in IRQSTATUS */
-	omap24xxcam_reg_out(base, CAMDMA_IRQSTATUS_L0, (1 << dmach));
-
-	return csr;
-}
-
-static int omap24xxcam_dmahw_running(void __iomem *base, int dmach)
-{
-	return omap24xxcam_reg_in(base, CAMDMA_CCR(dmach)) & CAMDMA_CCR_ENABLE;
-}
-
-static void omap24xxcam_dmahw_transfer_setup(void __iomem *base, int dmach,
-					     dma_addr_t start, u32 len)
-{
-	omap24xxcam_reg_out(base, CAMDMA_CCR(dmach),
-			    CAMDMA_CCR_SEL_SRC_DST_SYNC
-			    | CAMDMA_CCR_BS
-			    | CAMDMA_CCR_DST_AMODE_POST_INC
-			    | CAMDMA_CCR_SRC_AMODE_POST_INC
-			    | CAMDMA_CCR_FS
-			    | CAMDMA_CCR_WR_ACTIVE
-			    | CAMDMA_CCR_RD_ACTIVE
-			    | CAMDMA_CCR_SYNCHRO_CAMERA);
-	omap24xxcam_reg_out(base, CAMDMA_CLNK_CTRL(dmach), 0);
-	omap24xxcam_reg_out(base, CAMDMA_CEN(dmach), len);
-	omap24xxcam_reg_out(base, CAMDMA_CFN(dmach), 1);
-	omap24xxcam_reg_out(base, CAMDMA_CSDP(dmach),
-			    CAMDMA_CSDP_WRITE_MODE_POSTED
-			    | CAMDMA_CSDP_DST_BURST_EN_32
-			    | CAMDMA_CSDP_DST_PACKED
-			    | CAMDMA_CSDP_SRC_BURST_EN_32
-			    | CAMDMA_CSDP_SRC_PACKED
-			    | CAMDMA_CSDP_DATA_TYPE_8BITS);
-	omap24xxcam_reg_out(base, CAMDMA_CSSA(dmach), 0);
-	omap24xxcam_reg_out(base, CAMDMA_CDSA(dmach), start);
-	omap24xxcam_reg_out(base, CAMDMA_CSEI(dmach), 0);
-	omap24xxcam_reg_out(base, CAMDMA_CSFI(dmach), DMA_THRESHOLD);
-	omap24xxcam_reg_out(base, CAMDMA_CDEI(dmach), 0);
-	omap24xxcam_reg_out(base, CAMDMA_CDFI(dmach), 0);
-	omap24xxcam_reg_out(base, CAMDMA_CSR(dmach),
-			    CAMDMA_CSR_MISALIGNED_ERR
-			    | CAMDMA_CSR_SECURE_ERR
-			    | CAMDMA_CSR_TRANS_ERR
-			    | CAMDMA_CSR_BLOCK
-			    | CAMDMA_CSR_DROP);
-	omap24xxcam_reg_out(base, CAMDMA_CICR(dmach),
-			    CAMDMA_CICR_MISALIGNED_ERR_IE
-			    | CAMDMA_CICR_SECURE_ERR_IE
-			    | CAMDMA_CICR_TRANS_ERR_IE
-			    | CAMDMA_CICR_BLOCK_IE
-			    | CAMDMA_CICR_DROP_IE);
-}
-
-static void omap24xxcam_dmahw_transfer_start(void __iomem *base, int dmach)
-{
-	omap24xxcam_reg_out(base, CAMDMA_CCR(dmach),
-			    CAMDMA_CCR_SEL_SRC_DST_SYNC
-			    | CAMDMA_CCR_BS
-			    | CAMDMA_CCR_DST_AMODE_POST_INC
-			    | CAMDMA_CCR_SRC_AMODE_POST_INC
-			    | CAMDMA_CCR_ENABLE
-			    | CAMDMA_CCR_FS
-			    | CAMDMA_CCR_SYNCHRO_CAMERA);
-}
-
-static void omap24xxcam_dmahw_transfer_chain(void __iomem *base, int dmach,
-					     int free_dmach)
-{
-	int prev_dmach, ch;
-
-	if (dmach == 0)
-		prev_dmach = NUM_CAMDMA_CHANNELS - 1;
-	else
-		prev_dmach = dmach - 1;
-	omap24xxcam_reg_out(base, CAMDMA_CLNK_CTRL(prev_dmach),
-			    CAMDMA_CLNK_CTRL_ENABLE_LNK | dmach);
-	/* Did we chain the DMA transfer before the previous one
-	 * finished?
-	 */
-	ch = (dmach + free_dmach) % NUM_CAMDMA_CHANNELS;
-	while (!(omap24xxcam_reg_in(base, CAMDMA_CCR(ch))
-		 & CAMDMA_CCR_ENABLE)) {
-		if (ch == dmach) {
-			/* The previous transfer has ended and this one
-			 * hasn't started, so we must not have chained
-			 * to the previous one in time.  We'll have to
-			 * start it now.
-			 */
-			omap24xxcam_dmahw_transfer_start(base, dmach);
-			break;
-		} else
-			ch = (ch + 1) % NUM_CAMDMA_CHANNELS;
-	}
-}
-
-/* Abort all chained DMA transfers. After all transfers have been
- * aborted and the DMA controller is idle, the completion routines for
- * any aborted transfers will be called in sequence. The DMA
- * controller may not be idle after this routine completes, because
- * the completion routines might start new transfers.
- */
-static void omap24xxcam_dmahw_abort_ch(void __iomem *base, int dmach)
-{
-	/* mask all interrupts from this channel */
-	omap24xxcam_reg_out(base, CAMDMA_CICR(dmach), 0);
-	/* unlink this channel */
-	omap24xxcam_reg_merge(base, CAMDMA_CLNK_CTRL(dmach), 0,
-			      CAMDMA_CLNK_CTRL_ENABLE_LNK);
-	/* disable this channel */
-	omap24xxcam_reg_merge(base, CAMDMA_CCR(dmach), 0, CAMDMA_CCR_ENABLE);
-}
-
-static void omap24xxcam_dmahw_init(void __iomem *base)
-{
-	omap24xxcam_reg_out(base, CAMDMA_OCP_SYSCONFIG,
-			    CAMDMA_OCP_SYSCONFIG_MIDLEMODE_FSTANDBY
-			    | CAMDMA_OCP_SYSCONFIG_SIDLEMODE_FIDLE
-			    | CAMDMA_OCP_SYSCONFIG_AUTOIDLE);
-
-	omap24xxcam_reg_merge(base, CAMDMA_GCR, 0x10,
-			      CAMDMA_GCR_MAX_CHANNEL_FIFO_DEPTH);
-
-	omap24xxcam_reg_out(base, CAMDMA_IRQENABLE_L0, 0xf);
-}
-
-/*
- *
- * Individual DMA channel handling.
- *
- */
-
-/* Start a DMA transfer from the camera to memory.
- * Returns zero if the transfer was successfully started, or non-zero if all
- * DMA channels are already in use or starting is currently inhibited.
- */
-static int omap24xxcam_dma_start(struct omap24xxcam_dma *dma, dma_addr_t start,
-				 u32 len, dma_callback_t callback, void *arg)
-{
-	unsigned long flags;
-	int dmach;
-
-	spin_lock_irqsave(&dma->lock, flags);
-
-	if (!dma->free_dmach || atomic_read(&dma->dma_stop)) {
-		spin_unlock_irqrestore(&dma->lock, flags);
-		return -EBUSY;
-	}
-
-	dmach = dma->next_dmach;
-
-	dma->ch_state[dmach].callback = callback;
-	dma->ch_state[dmach].arg = arg;
-
-	omap24xxcam_dmahw_transfer_setup(dma->base, dmach, start, len);
-
-	/* We're ready to start the DMA transfer. */
-
-	if (dma->free_dmach < NUM_CAMDMA_CHANNELS) {
-		/* A transfer is already in progress, so try to chain to it. */
-		omap24xxcam_dmahw_transfer_chain(dma->base, dmach,
-						 dma->free_dmach);
-	} else {
-		/* No transfer is in progress, so we'll just start this one
-		 * now.
-		 */
-		omap24xxcam_dmahw_transfer_start(dma->base, dmach);
-	}
-
-	dma->next_dmach = (dma->next_dmach + 1) % NUM_CAMDMA_CHANNELS;
-	dma->free_dmach--;
-
-	spin_unlock_irqrestore(&dma->lock, flags);
-
-	return 0;
-}
-
-/* Abort all chained DMA transfers. After all transfers have been
- * aborted and the DMA controller is idle, the completion routines for
- * any aborted transfers will be called in sequence. The DMA
- * controller may not be idle after this routine completes, because
- * the completion routines might start new transfers.
- */
-static void omap24xxcam_dma_abort(struct omap24xxcam_dma *dma, u32 csr)
-{
-	unsigned long flags;
-	int dmach, i, free_dmach;
-	dma_callback_t callback;
-	void *arg;
-
-	spin_lock_irqsave(&dma->lock, flags);
-
-	/* stop any DMA transfers in progress */
-	dmach = (dma->next_dmach + dma->free_dmach) % NUM_CAMDMA_CHANNELS;
-	for (i = 0; i < NUM_CAMDMA_CHANNELS; i++) {
-		omap24xxcam_dmahw_abort_ch(dma->base, dmach);
-		dmach = (dmach + 1) % NUM_CAMDMA_CHANNELS;
-	}
-
-	/* We have to be careful here because the callback routine
-	 * might start a new DMA transfer, and we only want to abort
-	 * transfers that were started before this routine was called.
-	 */
-	free_dmach = dma->free_dmach;
-	while ((dma->free_dmach < NUM_CAMDMA_CHANNELS) &&
-	       (free_dmach < NUM_CAMDMA_CHANNELS)) {
-		dmach = (dma->next_dmach + dma->free_dmach)
-			% NUM_CAMDMA_CHANNELS;
-		callback = dma->ch_state[dmach].callback;
-		arg = dma->ch_state[dmach].arg;
-		dma->free_dmach++;
-		free_dmach++;
-		if (callback) {
-			/* leave interrupts disabled during callback */
-			spin_unlock(&dma->lock);
-			(*callback) (dma, csr, arg);
-			spin_lock(&dma->lock);
-		}
-	}
-
-	spin_unlock_irqrestore(&dma->lock, flags);
-}
-
-/* Abort all chained DMA transfers. After all transfers have been
- * aborted and the DMA controller is idle, the completion routines for
- * any aborted transfers will be called in sequence. If the completion
- * routines attempt to start a new DMA transfer it will fail, so the
- * DMA controller will be idle after this routine completes.
- */
-static void omap24xxcam_dma_stop(struct omap24xxcam_dma *dma, u32 csr)
-{
-	atomic_inc(&dma->dma_stop);
-	omap24xxcam_dma_abort(dma, csr);
-	atomic_dec(&dma->dma_stop);
-}
-
-/* Camera DMA interrupt service routine. */
-void omap24xxcam_dma_isr(struct omap24xxcam_dma *dma)
-{
-	int dmach;
-	dma_callback_t callback;
-	void *arg;
-	u32 csr;
-	const u32 csr_error = CAMDMA_CSR_MISALIGNED_ERR
-		| CAMDMA_CSR_SUPERVISOR_ERR | CAMDMA_CSR_SECURE_ERR
-		| CAMDMA_CSR_TRANS_ERR | CAMDMA_CSR_DROP;
-
-	spin_lock(&dma->lock);
-
-	if (dma->free_dmach == NUM_CAMDMA_CHANNELS) {
-		/* A camera DMA interrupt occurred while all channels
-		 * are idle, so we'll acknowledge the interrupt in the
-		 * IRQSTATUS register and exit.
-		 */
-		omap24xxcam_dmahw_ack_all(dma->base);
-		spin_unlock(&dma->lock);
-		return;
-	}
-
-	while (dma->free_dmach < NUM_CAMDMA_CHANNELS) {
-		dmach = (dma->next_dmach + dma->free_dmach)
-			% NUM_CAMDMA_CHANNELS;
-		if (omap24xxcam_dmahw_running(dma->base, dmach)) {
-			/* This buffer hasn't finished yet, so we're done. */
-			break;
-		}
-		csr = omap24xxcam_dmahw_ack_ch(dma->base, dmach);
-		if (csr & csr_error) {
-			/* A DMA error occurred, so stop all DMA
-			 * transfers in progress.
-			 */
-			spin_unlock(&dma->lock);
-			omap24xxcam_dma_stop(dma, csr);
-			return;
-		} else {
-			callback = dma->ch_state[dmach].callback;
-			arg = dma->ch_state[dmach].arg;
-			dma->free_dmach++;
-			if (callback) {
-				spin_unlock(&dma->lock);
-				(*callback) (dma, csr, arg);
-				spin_lock(&dma->lock);
-			}
-		}
-	}
-
-	spin_unlock(&dma->lock);
-
-	omap24xxcam_sgdma_process(
-		container_of(dma, struct omap24xxcam_sgdma, dma));
-}
-
-void omap24xxcam_dma_hwinit(struct omap24xxcam_dma *dma)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&dma->lock, flags);
-
-	omap24xxcam_dmahw_init(dma->base);
-
-	spin_unlock_irqrestore(&dma->lock, flags);
-}
-
-static void omap24xxcam_dma_init(struct omap24xxcam_dma *dma,
-				 void __iomem *base)
-{
-	int ch;
-
-	/* group all channels on DMA IRQ0 and unmask irq */
-	spin_lock_init(&dma->lock);
-	dma->base = base;
-	dma->free_dmach = NUM_CAMDMA_CHANNELS;
-	dma->next_dmach = 0;
-	for (ch = 0; ch < NUM_CAMDMA_CHANNELS; ch++) {
-		dma->ch_state[ch].callback = NULL;
-		dma->ch_state[ch].arg = NULL;
-	}
-}
-
-/*
- *
- * Scatter-gather DMA.
- *
- * High-level DMA construct for transferring whole picture frames to
- * memory that is discontinuous.
- *
- */
-
-/* DMA completion routine for the scatter-gather DMA fragments. */
-static void omap24xxcam_sgdma_callback(struct omap24xxcam_dma *dma, u32 csr,
-				       void *arg)
-{
-	struct omap24xxcam_sgdma *sgdma =
-		container_of(dma, struct omap24xxcam_sgdma, dma);
-	int sgslot = (int)arg;
-	struct sgdma_state *sg_state;
-	const u32 csr_error = CAMDMA_CSR_MISALIGNED_ERR
-		| CAMDMA_CSR_SUPERVISOR_ERR | CAMDMA_CSR_SECURE_ERR
-		| CAMDMA_CSR_TRANS_ERR | CAMDMA_CSR_DROP;
-
-	spin_lock(&sgdma->lock);
-
-	/* We got an interrupt, we can remove the timer */
-	del_timer(&sgdma->reset_timer);
-
-	sg_state = sgdma->sg_state + sgslot;
-	if (!sg_state->queued_sglist) {
-		spin_unlock(&sgdma->lock);
-		printk(KERN_ERR "%s: sgdma completed when none queued!\n",
-		       __func__);
-		return;
-	}
-
-	sg_state->csr |= csr;
-	if (!--sg_state->queued_sglist) {
-		/* Queue for this sglist is empty, so check to see if we're
-		 * done.
-		 */
-		if ((sg_state->next_sglist == sg_state->sglen)
-		    || (sg_state->csr & csr_error)) {
-			sgdma_callback_t callback = sg_state->callback;
-			void *arg = sg_state->arg;
-			u32 sg_csr = sg_state->csr;
-			/* All done with this sglist */
-			sgdma->free_sgdma++;
-			if (callback) {
-				spin_unlock(&sgdma->lock);
-				(*callback) (sgdma, sg_csr, arg);
-				return;
-			}
-		}
-	}
-
-	spin_unlock(&sgdma->lock);
-}
-
-/* Start queued scatter-gather DMA transfers. */
-void omap24xxcam_sgdma_process(struct omap24xxcam_sgdma *sgdma)
-{
-	unsigned long flags;
-	int queued_sgdma, sgslot;
-	struct sgdma_state *sg_state;
-	const u32 csr_error = CAMDMA_CSR_MISALIGNED_ERR
-		| CAMDMA_CSR_SUPERVISOR_ERR | CAMDMA_CSR_SECURE_ERR
-		| CAMDMA_CSR_TRANS_ERR | CAMDMA_CSR_DROP;
-
-	spin_lock_irqsave(&sgdma->lock, flags);
-
-	queued_sgdma = NUM_SG_DMA - sgdma->free_sgdma;
-	sgslot = (sgdma->next_sgdma + sgdma->free_sgdma) % NUM_SG_DMA;
-	while (queued_sgdma > 0) {
-		sg_state = sgdma->sg_state + sgslot;
-		while ((sg_state->next_sglist < sg_state->sglen) &&
-		       !(sg_state->csr & csr_error)) {
-			const struct scatterlist *sglist;
-			unsigned int len;
-
-			sglist = sg_state->sglist + sg_state->next_sglist;
-			/* try to start the next DMA transfer */
-			if (sg_state->next_sglist + 1 == sg_state->sglen) {
-				/*
-				 *  On the last sg, we handle the case where
-				 *  cam->img.pix.sizeimage % PAGE_ALIGN != 0
-				 */
-				len = sg_state->len - sg_state->bytes_read;
-			} else {
-				len = sg_dma_len(sglist);
-			}
-
-			if (omap24xxcam_dma_start(&sgdma->dma,
-						  sg_dma_address(sglist),
-						  len,
-						  omap24xxcam_sgdma_callback,
-						  (void *)sgslot)) {
-				/* DMA start failed */
-				spin_unlock_irqrestore(&sgdma->lock, flags);
-				return;
-			} else {
-				unsigned long expires;
-				/* DMA start was successful */
-				sg_state->next_sglist++;
-				sg_state->bytes_read += len;
-				sg_state->queued_sglist++;
-
-				/* We start the reset timer */
-				expires = jiffies + HZ;
-				mod_timer(&sgdma->reset_timer, expires);
-			}
-		}
-		queued_sgdma--;
-		sgslot = (sgslot + 1) % NUM_SG_DMA;
-	}
-
-	spin_unlock_irqrestore(&sgdma->lock, flags);
-}
-
-/*
- * Queue a scatter-gather DMA transfer from the camera to memory.
- * Returns zero if the transfer was successfully queued, or non-zero
- * if all of the scatter-gather slots are already in use.
- */
-int omap24xxcam_sgdma_queue(struct omap24xxcam_sgdma *sgdma,
-			    const struct scatterlist *sglist, int sglen,
-			    int len, sgdma_callback_t callback, void *arg)
-{
-	unsigned long flags;
-	struct sgdma_state *sg_state;
-
-	if ((sglen < 0) || ((sglen > 0) && !sglist))
-		return -EINVAL;
-
-	spin_lock_irqsave(&sgdma->lock, flags);
-
-	if (!sgdma->free_sgdma) {
-		spin_unlock_irqrestore(&sgdma->lock, flags);
-		return -EBUSY;
-	}
-
-	sg_state = sgdma->sg_state + sgdma->next_sgdma;
-
-	sg_state->sglist = sglist;
-	sg_state->sglen = sglen;
-	sg_state->next_sglist = 0;
-	sg_state->bytes_read = 0;
-	sg_state->len = len;
-	sg_state->queued_sglist = 0;
-	sg_state->csr = 0;
-	sg_state->callback = callback;
-	sg_state->arg = arg;
-
-	sgdma->next_sgdma = (sgdma->next_sgdma + 1) % NUM_SG_DMA;
-	sgdma->free_sgdma--;
-
-	spin_unlock_irqrestore(&sgdma->lock, flags);
-
-	omap24xxcam_sgdma_process(sgdma);
-
-	return 0;
-}
-
-/* Sync scatter-gather DMA by aborting any DMA transfers currently in progress.
- * Any queued scatter-gather DMA transactions that have not yet been started
- * will remain queued.  The DMA controller will be idle after this routine
- * completes.  When the scatter-gather queue is restarted, the next
- * scatter-gather DMA transfer will begin at the start of a new transaction.
- */
-void omap24xxcam_sgdma_sync(struct omap24xxcam_sgdma *sgdma)
-{
-	unsigned long flags;
-	int sgslot;
-	struct sgdma_state *sg_state;
-	u32 csr = CAMDMA_CSR_TRANS_ERR;
-
-	/* stop any DMA transfers in progress */
-	omap24xxcam_dma_stop(&sgdma->dma, csr);
-
-	spin_lock_irqsave(&sgdma->lock, flags);
-
-	if (sgdma->free_sgdma < NUM_SG_DMA) {
-		sgslot = (sgdma->next_sgdma + sgdma->free_sgdma) % NUM_SG_DMA;
-		sg_state = sgdma->sg_state + sgslot;
-		if (sg_state->next_sglist != 0) {
-			/* This DMA transfer was in progress, so abort it. */
-			sgdma_callback_t callback = sg_state->callback;
-			void *arg = sg_state->arg;
-			sgdma->free_sgdma++;
-			if (callback) {
-				/* leave interrupts masked */
-				spin_unlock(&sgdma->lock);
-				(*callback) (sgdma, csr, arg);
-				spin_lock(&sgdma->lock);
-			}
-		}
-	}
-
-	spin_unlock_irqrestore(&sgdma->lock, flags);
-}
-
-void omap24xxcam_sgdma_init(struct omap24xxcam_sgdma *sgdma,
-			    void __iomem *base,
-			    void (*reset_callback)(unsigned long data),
-			    unsigned long reset_callback_data)
-{
-	int sg;
-
-	spin_lock_init(&sgdma->lock);
-	sgdma->free_sgdma = NUM_SG_DMA;
-	sgdma->next_sgdma = 0;
-	for (sg = 0; sg < NUM_SG_DMA; sg++) {
-		sgdma->sg_state[sg].sglen = 0;
-		sgdma->sg_state[sg].next_sglist = 0;
-		sgdma->sg_state[sg].bytes_read = 0;
-		sgdma->sg_state[sg].queued_sglist = 0;
-		sgdma->sg_state[sg].csr = 0;
-		sgdma->sg_state[sg].callback = NULL;
-		sgdma->sg_state[sg].arg = NULL;
-	}
-
-	omap24xxcam_dma_init(&sgdma->dma, base);
-	setup_timer(&sgdma->reset_timer, reset_callback, reset_callback_data);
-}
diff --git a/drivers/media/platform/omap24xxcam.c b/drivers/media/platform/omap24xxcam.c
deleted file mode 100644
index 70f45c3..0000000
--- a/drivers/media/platform/omap24xxcam.c
+++ /dev/null
@@ -1,1881 +0,0 @@
-/*
- * drivers/media/platform/omap24xxcam.c
- *
- * OMAP 2 camera block driver.
- *
- * Copyright (C) 2004 MontaVista Software, Inc.
- * Copyright (C) 2004 Texas Instruments.
- * Copyright (C) 2007-2008 Nokia Corporation.
- *
- * Contact: Sakari Ailus <sakari.ailus@nokia.com>
- *
- * Based on code from Andy Lowe <source@mvista.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/videodev2.h>
-#include <linux/pci.h>		/* needed for videobufs */
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/sched.h>
-#include <linux/module.h>
-
-#include <media/v4l2-common.h>
-#include <media/v4l2-ioctl.h>
-
-#include "omap24xxcam.h"
-
-#define OMAP24XXCAM_VERSION "0.0.1"
-
-#define RESET_TIMEOUT_NS 10000
-
-static void omap24xxcam_reset(struct omap24xxcam_device *cam);
-static int omap24xxcam_sensor_if_enable(struct omap24xxcam_device *cam);
-static void omap24xxcam_device_unregister(struct v4l2_int_device *s);
-static int omap24xxcam_remove(struct platform_device *pdev);
-
-/* module parameters */
-static int video_nr = -1;	/* video device minor (-1 ==> auto assign) */
-/*
- * Maximum amount of memory to use for capture buffers.
- * Default is 4800KB, enough to double-buffer SXGA.
- */
-static int capture_mem = 1280 * 960 * 2 * 2;
-
-static struct v4l2_int_device omap24xxcam;
-
-/*
- *
- * Clocks.
- *
- */
-
-static void omap24xxcam_clock_put(struct omap24xxcam_device *cam)
-{
-	if (cam->ick != NULL && !IS_ERR(cam->ick))
-		clk_put(cam->ick);
-	if (cam->fck != NULL && !IS_ERR(cam->fck))
-		clk_put(cam->fck);
-
-	cam->ick = cam->fck = NULL;
-}
-
-static int omap24xxcam_clock_get(struct omap24xxcam_device *cam)
-{
-	int rval = 0;
-
-	cam->fck = clk_get(cam->dev, "fck");
-	if (IS_ERR(cam->fck)) {
-		dev_err(cam->dev, "can't get camera fck");
-		rval = PTR_ERR(cam->fck);
-		omap24xxcam_clock_put(cam);
-		return rval;
-	}
-
-	cam->ick = clk_get(cam->dev, "ick");
-	if (IS_ERR(cam->ick)) {
-		dev_err(cam->dev, "can't get camera ick");
-		rval = PTR_ERR(cam->ick);
-		omap24xxcam_clock_put(cam);
-	}
-
-	return rval;
-}
-
-static void omap24xxcam_clock_on(struct omap24xxcam_device *cam)
-{
-	clk_enable(cam->fck);
-	clk_enable(cam->ick);
-}
-
-static void omap24xxcam_clock_off(struct omap24xxcam_device *cam)
-{
-	clk_disable(cam->fck);
-	clk_disable(cam->ick);
-}
-
-/*
- *
- * Camera core
- *
- */
-
-/*
- * Set xclk.
- *
- * To disable xclk, use value zero.
- */
-static void omap24xxcam_core_xclk_set(const struct omap24xxcam_device *cam,
-				      u32 xclk)
-{
-	if (xclk) {
-		u32 divisor = CAM_MCLK / xclk;
-
-		if (divisor == 1)
-			omap24xxcam_reg_out(cam->mmio_base + CC_REG_OFFSET,
-					    CC_CTRL_XCLK,
-					    CC_CTRL_XCLK_DIV_BYPASS);
-		else
-			omap24xxcam_reg_out(cam->mmio_base + CC_REG_OFFSET,
-					    CC_CTRL_XCLK, divisor);
-	} else
-		omap24xxcam_reg_out(cam->mmio_base + CC_REG_OFFSET,
-				    CC_CTRL_XCLK, CC_CTRL_XCLK_DIV_STABLE_LOW);
-}
-
-static void omap24xxcam_core_hwinit(const struct omap24xxcam_device *cam)
-{
-	/*
-	 * Setting the camera core AUTOIDLE bit causes problems with frame
-	 * synchronization, so we will clear the AUTOIDLE bit instead.
-	 */
-	omap24xxcam_reg_out(cam->mmio_base + CC_REG_OFFSET, CC_SYSCONFIG,
-			    CC_SYSCONFIG_AUTOIDLE);
-
-	/* program the camera interface DMA packet size */
-	omap24xxcam_reg_out(cam->mmio_base + CC_REG_OFFSET, CC_CTRL_DMA,
-			    CC_CTRL_DMA_EN | (DMA_THRESHOLD / 4 - 1));
-
-	/* enable camera core error interrupts */
-	omap24xxcam_reg_out(cam->mmio_base + CC_REG_OFFSET, CC_IRQENABLE,
-			    CC_IRQENABLE_FW_ERR_IRQ
-			    | CC_IRQENABLE_FSC_ERR_IRQ
-			    | CC_IRQENABLE_SSC_ERR_IRQ
-			    | CC_IRQENABLE_FIFO_OF_IRQ);
-}
-
-/*
- * Enable the camera core.
- *
- * Data transfer to the camera DMA starts from next starting frame.
- */
-static void omap24xxcam_core_enable(const struct omap24xxcam_device *cam)
-{
-
-	omap24xxcam_reg_out(cam->mmio_base + CC_REG_OFFSET, CC_CTRL,
-			    cam->cc_ctrl);
-}
-
-/*
- * Disable camera core.
- *
- * The data transfer will be stopped immediately (CC_CTRL_CC_RST). The
- * core internal state machines will be reset. Use
- * CC_CTRL_CC_FRAME_TRIG instead if you want to transfer the current
- * frame completely.
- */
-static void omap24xxcam_core_disable(const struct omap24xxcam_device *cam)
-{
-	omap24xxcam_reg_out(cam->mmio_base + CC_REG_OFFSET, CC_CTRL,
-			    CC_CTRL_CC_RST);
-}
-
-/* Interrupt service routine for camera core interrupts. */
-static void omap24xxcam_core_isr(struct omap24xxcam_device *cam)
-{
-	u32 cc_irqstatus;
-	const u32 cc_irqstatus_err =
-		CC_IRQSTATUS_FW_ERR_IRQ
-		| CC_IRQSTATUS_FSC_ERR_IRQ
-		| CC_IRQSTATUS_SSC_ERR_IRQ
-		| CC_IRQSTATUS_FIFO_UF_IRQ
-		| CC_IRQSTATUS_FIFO_OF_IRQ;
-
-	cc_irqstatus = omap24xxcam_reg_in(cam->mmio_base + CC_REG_OFFSET,
-					  CC_IRQSTATUS);
-	omap24xxcam_reg_out(cam->mmio_base + CC_REG_OFFSET, CC_IRQSTATUS,
-			    cc_irqstatus);
-
-	if (cc_irqstatus & cc_irqstatus_err
-	    && !atomic_read(&cam->in_reset)) {
-		dev_dbg(cam->dev, "resetting camera, cc_irqstatus 0x%x\n",
-			cc_irqstatus);
-		omap24xxcam_reset(cam);
-	}
-}
-
-/*
- *
- * videobuf_buffer handling.
- *
- * Memory for mmapped videobuf_buffers is not allocated
- * conventionally, but by several kmalloc allocations and then
- * creating the scatterlist on our own. User-space buffers are handled
- * normally.
- *
- */
-
-/*
- * Free the memory-mapped buffer memory allocated for a
- * videobuf_buffer and the associated scatterlist.
- */
-static void omap24xxcam_vbq_free_mmap_buffer(struct videobuf_buffer *vb)
-{
-	struct videobuf_dmabuf *dma = videobuf_to_dma(vb);
-	size_t alloc_size;
-	struct page *page;
-	int i;
-
-	if (dma->sglist == NULL)
-		return;
-
-	i = dma->sglen;
-	while (i) {
-		i--;
-		alloc_size = sg_dma_len(&dma->sglist[i]);
-		page = sg_page(&dma->sglist[i]);
-		do {
-			ClearPageReserved(page++);
-		} while (alloc_size -= PAGE_SIZE);
-		__free_pages(sg_page(&dma->sglist[i]),
-			     get_order(sg_dma_len(&dma->sglist[i])));
-	}
-
-	kfree(dma->sglist);
-	dma->sglist = NULL;
-}
-
-/* Release all memory related to the videobuf_queue. */
-static void omap24xxcam_vbq_free_mmap_buffers(struct videobuf_queue *vbq)
-{
-	int i;
-
-	mutex_lock(&vbq->vb_lock);
-
-	for (i = 0; i < VIDEO_MAX_FRAME; i++) {
-		if (NULL == vbq->bufs[i])
-			continue;
-		if (V4L2_MEMORY_MMAP != vbq->bufs[i]->memory)
-			continue;
-		vbq->ops->buf_release(vbq, vbq->bufs[i]);
-		omap24xxcam_vbq_free_mmap_buffer(vbq->bufs[i]);
-		kfree(vbq->bufs[i]);
-		vbq->bufs[i] = NULL;
-	}
-
-	mutex_unlock(&vbq->vb_lock);
-
-	videobuf_mmap_free(vbq);
-}
-
-/*
- * Allocate physically as contiguous as possible buffer for video
- * frame and allocate and build DMA scatter-gather list for it.
- */
-static int omap24xxcam_vbq_alloc_mmap_buffer(struct videobuf_buffer *vb)
-{
-	unsigned int order;
-	size_t alloc_size, size = vb->bsize; /* vb->bsize is page aligned */
-	struct page *page;
-	int max_pages, err = 0, i = 0;
-	struct videobuf_dmabuf *dma = videobuf_to_dma(vb);
-
-	/*
-	 * allocate maximum size scatter-gather list. Note this is
-	 * overhead. We may not use as many entries as we allocate
-	 */
-	max_pages = vb->bsize >> PAGE_SHIFT;
-	dma->sglist = kcalloc(max_pages, sizeof(*dma->sglist), GFP_KERNEL);
-	if (dma->sglist == NULL) {
-		err = -ENOMEM;
-		goto out;
-	}
-
-	while (size) {
-		order = get_order(size);
-		/*
-		 * do not over-allocate even if we would get larger
-		 * contiguous chunk that way
-		 */
-		if ((PAGE_SIZE << order) > size)
-			order--;
-
-		/* try to allocate as many contiguous pages as possible */
-		page = alloc_pages(GFP_KERNEL, order);
-		/* if allocation fails, try to allocate smaller amount */
-		while (page == NULL) {
-			order--;
-			page = alloc_pages(GFP_KERNEL, order);
-			if (page == NULL && !order) {
-				err = -ENOMEM;
-				goto out;
-			}
-		}
-		size -= (PAGE_SIZE << order);
-
-		/* append allocated chunk of pages into scatter-gather list */
-		sg_set_page(&dma->sglist[i], page, PAGE_SIZE << order, 0);
-		dma->sglen++;
-		i++;
-
-		alloc_size = (PAGE_SIZE << order);
-
-		/* clear pages before giving them to user space */
-		memset(page_address(page), 0, alloc_size);
-
-		/* mark allocated pages reserved */
-		do {
-			SetPageReserved(page++);
-		} while (alloc_size -= PAGE_SIZE);
-	}
-	/*
-	 * REVISIT: not fully correct to assign nr_pages == sglen but
-	 * video-buf is passing nr_pages for e.g. unmap_sg calls
-	 */
-	dma->nr_pages = dma->sglen;
-	dma->direction = PCI_DMA_FROMDEVICE;
-
-	return 0;
-
-out:
-	omap24xxcam_vbq_free_mmap_buffer(vb);
-	return err;
-}
-
-static int omap24xxcam_vbq_alloc_mmap_buffers(struct videobuf_queue *vbq,
-					      unsigned int count)
-{
-	int i, err = 0;
-	struct omap24xxcam_fh *fh =
-		container_of(vbq, struct omap24xxcam_fh, vbq);
-
-	mutex_lock(&vbq->vb_lock);
-
-	for (i = 0; i < count; i++) {
-		err = omap24xxcam_vbq_alloc_mmap_buffer(vbq->bufs[i]);
-		if (err)
-			goto out;
-		dev_dbg(fh->cam->dev, "sglen is %d for buffer %d\n",
-			videobuf_to_dma(vbq->bufs[i])->sglen, i);
-	}
-
-	mutex_unlock(&vbq->vb_lock);
-
-	return 0;
-out:
-	while (i) {
-		i--;
-		omap24xxcam_vbq_free_mmap_buffer(vbq->bufs[i]);
-	}
-
-	mutex_unlock(&vbq->vb_lock);
-
-	return err;
-}
-
-/*
- * This routine is called from interrupt context when a scatter-gather DMA
- * transfer of a videobuf_buffer completes.
- */
-static void omap24xxcam_vbq_complete(struct omap24xxcam_sgdma *sgdma,
-				     u32 csr, void *arg)
-{
-	struct omap24xxcam_device *cam =
-		container_of(sgdma, struct omap24xxcam_device, sgdma);
-	struct omap24xxcam_fh *fh = cam->streaming->private_data;
-	struct videobuf_buffer *vb = (struct videobuf_buffer *)arg;
-	const u32 csr_error = CAMDMA_CSR_MISALIGNED_ERR
-		| CAMDMA_CSR_SUPERVISOR_ERR | CAMDMA_CSR_SECURE_ERR
-		| CAMDMA_CSR_TRANS_ERR | CAMDMA_CSR_DROP;
-	unsigned long flags;
-
-	spin_lock_irqsave(&cam->core_enable_disable_lock, flags);
-	if (--cam->sgdma_in_queue == 0)
-		omap24xxcam_core_disable(cam);
-	spin_unlock_irqrestore(&cam->core_enable_disable_lock, flags);
-
-	do_gettimeofday(&vb->ts);
-	vb->field_count = atomic_add_return(2, &fh->field_count);
-	if (csr & csr_error) {
-		vb->state = VIDEOBUF_ERROR;
-		if (!atomic_read(&fh->cam->in_reset)) {
-			dev_dbg(cam->dev, "resetting camera, csr 0x%x\n", csr);
-			omap24xxcam_reset(cam);
-		}
-	} else
-		vb->state = VIDEOBUF_DONE;
-	wake_up(&vb->done);
-}
-
-static void omap24xxcam_vbq_release(struct videobuf_queue *vbq,
-				    struct videobuf_buffer *vb)
-{
-	struct videobuf_dmabuf *dma = videobuf_to_dma(vb);
-
-	/* wait for buffer, especially to get out of the sgdma queue */
-	videobuf_waiton(vbq, vb, 0, 0);
-	if (vb->memory == V4L2_MEMORY_MMAP) {
-		dma_unmap_sg(vbq->dev, dma->sglist, dma->sglen,
-			     dma->direction);
-		dma->direction = DMA_NONE;
-	} else {
-		videobuf_dma_unmap(vbq->dev, videobuf_to_dma(vb));
-		videobuf_dma_free(videobuf_to_dma(vb));
-	}
-
-	vb->state = VIDEOBUF_NEEDS_INIT;
-}
-
-/*
- * Limit the number of available kernel image capture buffers based on the
- * number requested, the currently selected image size, and the maximum
- * amount of memory permitted for kernel capture buffers.
- */
-static int omap24xxcam_vbq_setup(struct videobuf_queue *vbq, unsigned int *cnt,
-				 unsigned int *size)
-{
-	struct omap24xxcam_fh *fh = vbq->priv_data;
-
-	if (*cnt <= 0)
-		*cnt = VIDEO_MAX_FRAME;	/* supply a default number of buffers */
-
-	if (*cnt > VIDEO_MAX_FRAME)
-		*cnt = VIDEO_MAX_FRAME;
-
-	*size = fh->pix.sizeimage;
-
-	/* accessing fh->cam->capture_mem is ok, it's constant */
-	if (*size * *cnt > fh->cam->capture_mem)
-		*cnt = fh->cam->capture_mem / *size;
-
-	return 0;
-}
-
-static int omap24xxcam_dma_iolock(struct videobuf_queue *vbq,
-				  struct videobuf_dmabuf *dma)
-{
-	int err = 0;
-
-	dma->direction = PCI_DMA_FROMDEVICE;
-	if (!dma_map_sg(vbq->dev, dma->sglist, dma->sglen, dma->direction)) {
-		kfree(dma->sglist);
-		dma->sglist = NULL;
-		dma->sglen = 0;
-		err = -EIO;
-	}
-
-	return err;
-}
-
-static int omap24xxcam_vbq_prepare(struct videobuf_queue *vbq,
-				   struct videobuf_buffer *vb,
-				   enum v4l2_field field)
-{
-	struct omap24xxcam_fh *fh = vbq->priv_data;
-	int err = 0;
-
-	/*
-	 * Accessing pix here is okay since it's constant while
-	 * streaming is on (and we only get called then).
-	 */
-	if (vb->baddr) {
-		/* This is a userspace buffer. */
-		if (fh->pix.sizeimage > vb->bsize) {
-			/* The buffer isn't big enough. */
-			err = -EINVAL;
-		} else
-			vb->size = fh->pix.sizeimage;
-	} else {
-		if (vb->state != VIDEOBUF_NEEDS_INIT) {
-			/*
-			 * We have a kernel bounce buffer that has
-			 * already been allocated.
-			 */
-			if (fh->pix.sizeimage > vb->size) {
-				/*
-				 * The image size has been changed to
-				 * a larger size since this buffer was
-				 * allocated, so we need to free and
-				 * reallocate it.
-				 */
-				omap24xxcam_vbq_release(vbq, vb);
-				vb->size = fh->pix.sizeimage;
-			}
-		} else {
-			/* We need to allocate a new kernel bounce buffer. */
-			vb->size = fh->pix.sizeimage;
-		}
-	}
-
-	if (err)
-		return err;
-
-	vb->width = fh->pix.width;
-	vb->height = fh->pix.height;
-	vb->field = field;
-
-	if (vb->state == VIDEOBUF_NEEDS_INIT) {
-		if (vb->memory == V4L2_MEMORY_MMAP)
-			/*
-			 * we have built the scatter-gather list by ourself so
-			 * do the scatter-gather mapping as well
-			 */
-			err = omap24xxcam_dma_iolock(vbq, videobuf_to_dma(vb));
-		else
-			err = videobuf_iolock(vbq, vb, NULL);
-	}
-
-	if (!err)
-		vb->state = VIDEOBUF_PREPARED;
-	else
-		omap24xxcam_vbq_release(vbq, vb);
-
-	return err;
-}
-
-static void omap24xxcam_vbq_queue(struct videobuf_queue *vbq,
-				  struct videobuf_buffer *vb)
-{
-	struct omap24xxcam_fh *fh = vbq->priv_data;
-	struct omap24xxcam_device *cam = fh->cam;
-	enum videobuf_state state = vb->state;
-	unsigned long flags;
-	int err;
-
-	/*
-	 * FIXME: We're marking the buffer active since we have no
-	 * pretty way of marking it active exactly when the
-	 * scatter-gather transfer starts.
-	 */
-	vb->state = VIDEOBUF_ACTIVE;
-
-	err = omap24xxcam_sgdma_queue(&fh->cam->sgdma,
-				      videobuf_to_dma(vb)->sglist,
-				      videobuf_to_dma(vb)->sglen, vb->size,
-				      omap24xxcam_vbq_complete, vb);
-
-	if (!err) {
-		spin_lock_irqsave(&cam->core_enable_disable_lock, flags);
-		if (++cam->sgdma_in_queue == 1
-		    && !atomic_read(&cam->in_reset))
-			omap24xxcam_core_enable(cam);
-		spin_unlock_irqrestore(&cam->core_enable_disable_lock, flags);
-	} else {
-		/*
-		 * Oops. We're not supposed to get any errors here.
-		 * The only way we could get an error is if we ran out
-		 * of scatter-gather DMA slots, but we are supposed to
-		 * have at least as many scatter-gather DMA slots as
-		 * video buffers so that can't happen.
-		 */
-		dev_err(cam->dev, "failed to queue a video buffer for dma!\n");
-		dev_err(cam->dev, "likely a bug in the driver!\n");
-		vb->state = state;
-	}
-}
-
-static struct videobuf_queue_ops omap24xxcam_vbq_ops = {
-	.buf_setup   = omap24xxcam_vbq_setup,
-	.buf_prepare = omap24xxcam_vbq_prepare,
-	.buf_queue   = omap24xxcam_vbq_queue,
-	.buf_release = omap24xxcam_vbq_release,
-};
-
-/*
- *
- * OMAP main camera system
- *
- */
-
-/*
- * Reset camera block to power-on state.
- */
-static void omap24xxcam_poweron_reset(struct omap24xxcam_device *cam)
-{
-	int max_loop = RESET_TIMEOUT_NS;
-
-	/* Reset whole camera subsystem */
-	omap24xxcam_reg_out(cam->mmio_base,
-			    CAM_SYSCONFIG,
-			    CAM_SYSCONFIG_SOFTRESET);
-
-	/* Wait till it's finished */
-	while (!(omap24xxcam_reg_in(cam->mmio_base, CAM_SYSSTATUS)
-		 & CAM_SYSSTATUS_RESETDONE)
-	       && --max_loop) {
-		ndelay(1);
-	}
-
-	if (!(omap24xxcam_reg_in(cam->mmio_base, CAM_SYSSTATUS)
-	      & CAM_SYSSTATUS_RESETDONE))
-		dev_err(cam->dev, "camera soft reset timeout\n");
-}
-
-/*
- * (Re)initialise the camera block.
- */
-static void omap24xxcam_hwinit(struct omap24xxcam_device *cam)
-{
-	omap24xxcam_poweron_reset(cam);
-
-	/* set the camera subsystem autoidle bit */
-	omap24xxcam_reg_out(cam->mmio_base, CAM_SYSCONFIG,
-			    CAM_SYSCONFIG_AUTOIDLE);
-
-	/* set the camera MMU autoidle bit */
-	omap24xxcam_reg_out(cam->mmio_base,
-			    CAMMMU_REG_OFFSET + CAMMMU_SYSCONFIG,
-			    CAMMMU_SYSCONFIG_AUTOIDLE);
-
-	omap24xxcam_core_hwinit(cam);
-
-	omap24xxcam_dma_hwinit(&cam->sgdma.dma);
-}
-
-/*
- * Callback for dma transfer stalling.
- */
-static void omap24xxcam_stalled_dma_reset(unsigned long data)
-{
-	struct omap24xxcam_device *cam = (struct omap24xxcam_device *)data;
-
-	if (!atomic_read(&cam->in_reset)) {
-		dev_dbg(cam->dev, "dma stalled, resetting camera\n");
-		omap24xxcam_reset(cam);
-	}
-}
-
-/*
- * Stop capture. Mark we're doing a reset, stop DMA transfers and
- * core. (No new scatter-gather transfers will be queued whilst
- * in_reset is non-zero.)
- *
- * If omap24xxcam_capture_stop is called from several places at
- * once, only the first call will have an effect. Similarly, the last
- * call omap24xxcam_streaming_cont will have effect.
- *
- * Serialisation is ensured by using cam->core_enable_disable_lock.
- */
-static void omap24xxcam_capture_stop(struct omap24xxcam_device *cam)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&cam->core_enable_disable_lock, flags);
-
-	if (atomic_inc_return(&cam->in_reset) != 1) {
-		spin_unlock_irqrestore(&cam->core_enable_disable_lock, flags);
-		return;
-	}
-
-	omap24xxcam_core_disable(cam);
-
-	spin_unlock_irqrestore(&cam->core_enable_disable_lock, flags);
-
-	omap24xxcam_sgdma_sync(&cam->sgdma);
-}
-
-/*
- * Reset and continue streaming.
- *
- * Note: Resetting the camera FIFO via the CC_RST bit in the CC_CTRL
- * register is supposed to be sufficient to recover from a camera
- * interface error, but it doesn't seem to be enough. If we only do
- * that then subsequent image captures are out of sync by either one
- * or two times DMA_THRESHOLD bytes. Resetting and re-initializing the
- * entire camera subsystem prevents the problem with frame
- * synchronization.
- */
-static void omap24xxcam_capture_cont(struct omap24xxcam_device *cam)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&cam->core_enable_disable_lock, flags);
-
-	if (atomic_read(&cam->in_reset) != 1)
-		goto out;
-
-	omap24xxcam_hwinit(cam);
-
-	omap24xxcam_sensor_if_enable(cam);
-
-	omap24xxcam_sgdma_process(&cam->sgdma);
-
-	if (cam->sgdma_in_queue)
-		omap24xxcam_core_enable(cam);
-
-out:
-	atomic_dec(&cam->in_reset);
-	spin_unlock_irqrestore(&cam->core_enable_disable_lock, flags);
-}
-
-static ssize_t
-omap24xxcam_streaming_show(struct device *dev, struct device_attribute *attr,
-		char *buf)
-{
-	struct omap24xxcam_device *cam = dev_get_drvdata(dev);
-
-	return sprintf(buf, "%s\n", cam->streaming ?  "active" : "inactive");
-}
-static DEVICE_ATTR(streaming, S_IRUGO, omap24xxcam_streaming_show, NULL);
-
-/*
- * Stop capture and restart it. I.e. reset the camera during use.
- */
-static void omap24xxcam_reset(struct omap24xxcam_device *cam)
-{
-	omap24xxcam_capture_stop(cam);
-	omap24xxcam_capture_cont(cam);
-}
-
-/*
- * The main interrupt handler.
- */
-static irqreturn_t omap24xxcam_isr(int irq, void *arg)
-{
-	struct omap24xxcam_device *cam = (struct omap24xxcam_device *)arg;
-	u32 irqstatus;
-	unsigned int irqhandled = 0;
-
-	irqstatus = omap24xxcam_reg_in(cam->mmio_base, CAM_IRQSTATUS);
-
-	if (irqstatus &
-	    (CAM_IRQSTATUS_DMA_IRQ2 | CAM_IRQSTATUS_DMA_IRQ1
-	     | CAM_IRQSTATUS_DMA_IRQ0)) {
-		omap24xxcam_dma_isr(&cam->sgdma.dma);
-		irqhandled = 1;
-	}
-	if (irqstatus & CAM_IRQSTATUS_CC_IRQ) {
-		omap24xxcam_core_isr(cam);
-		irqhandled = 1;
-	}
-	if (irqstatus & CAM_IRQSTATUS_MMU_IRQ)
-		dev_err(cam->dev, "unhandled camera MMU interrupt!\n");
-
-	return IRQ_RETVAL(irqhandled);
-}
-
-/*
- *
- * Sensor handling.
- *
- */
-
-/*
- * Enable the external sensor interface. Try to negotiate interface
- * parameters with the sensor and start using the new ones. The calls
- * to sensor_if_enable and sensor_if_disable need not to be balanced.
- */
-static int omap24xxcam_sensor_if_enable(struct omap24xxcam_device *cam)
-{
-	int rval;
-	struct v4l2_ifparm p;
-
-	rval = vidioc_int_g_ifparm(cam->sdev, &p);
-	if (rval) {
-		dev_err(cam->dev, "vidioc_int_g_ifparm failed with %d\n", rval);
-		return rval;
-	}
-
-	cam->if_type = p.if_type;
-
-	cam->cc_ctrl = CC_CTRL_CC_EN;
-
-	switch (p.if_type) {
-	case V4L2_IF_TYPE_BT656:
-		if (p.u.bt656.frame_start_on_rising_vs)
-			cam->cc_ctrl |= CC_CTRL_NOBT_SYNCHRO;
-		if (p.u.bt656.bt_sync_correct)
-			cam->cc_ctrl |= CC_CTRL_BT_CORRECT;
-		if (p.u.bt656.swap)
-			cam->cc_ctrl |= CC_CTRL_PAR_ORDERCAM;
-		if (p.u.bt656.latch_clk_inv)
-			cam->cc_ctrl |= CC_CTRL_PAR_CLK_POL;
-		if (p.u.bt656.nobt_hs_inv)
-			cam->cc_ctrl |= CC_CTRL_NOBT_HS_POL;
-		if (p.u.bt656.nobt_vs_inv)
-			cam->cc_ctrl |= CC_CTRL_NOBT_VS_POL;
-
-		switch (p.u.bt656.mode) {
-		case V4L2_IF_TYPE_BT656_MODE_NOBT_8BIT:
-			cam->cc_ctrl |= CC_CTRL_PAR_MODE_NOBT8;
-			break;
-		case V4L2_IF_TYPE_BT656_MODE_NOBT_10BIT:
-			cam->cc_ctrl |= CC_CTRL_PAR_MODE_NOBT10;
-			break;
-		case V4L2_IF_TYPE_BT656_MODE_NOBT_12BIT:
-			cam->cc_ctrl |= CC_CTRL_PAR_MODE_NOBT12;
-			break;
-		case V4L2_IF_TYPE_BT656_MODE_BT_8BIT:
-			cam->cc_ctrl |= CC_CTRL_PAR_MODE_BT8;
-			break;
-		case V4L2_IF_TYPE_BT656_MODE_BT_10BIT:
-			cam->cc_ctrl |= CC_CTRL_PAR_MODE_BT10;
-			break;
-		default:
-			dev_err(cam->dev,
-				"bt656 interface mode %d not supported\n",
-				p.u.bt656.mode);
-			return -EINVAL;
-		}
-		/*
-		 * The clock rate that the sensor wants has changed.
-		 * We have to adjust the xclk from OMAP 2 side to
-		 * match the sensor's wish as closely as possible.
-		 */
-		if (p.u.bt656.clock_curr != cam->if_u.bt656.xclk) {
-			u32 xclk = p.u.bt656.clock_curr;
-			u32 divisor;
-
-			if (xclk == 0)
-				return -EINVAL;
-
-			if (xclk > CAM_MCLK)
-				xclk = CAM_MCLK;
-
-			divisor = CAM_MCLK / xclk;
-			if (divisor * xclk < CAM_MCLK)
-				divisor++;
-			if (CAM_MCLK / divisor < p.u.bt656.clock_min
-			    && divisor > 1)
-				divisor--;
-			if (divisor > 30)
-				divisor = 30;
-
-			xclk = CAM_MCLK / divisor;
-
-			if (xclk < p.u.bt656.clock_min
-			    || xclk > p.u.bt656.clock_max)
-				return -EINVAL;
-
-			cam->if_u.bt656.xclk = xclk;
-		}
-		omap24xxcam_core_xclk_set(cam, cam->if_u.bt656.xclk);
-		break;
-	default:
-		/* FIXME: how about other interfaces? */
-		dev_err(cam->dev, "interface type %d not supported\n",
-			p.if_type);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static void omap24xxcam_sensor_if_disable(const struct omap24xxcam_device *cam)
-{
-	switch (cam->if_type) {
-	case V4L2_IF_TYPE_BT656:
-		omap24xxcam_core_xclk_set(cam, 0);
-		break;
-	}
-}
-
-/*
- * Initialise the sensor hardware.
- */
-static int omap24xxcam_sensor_init(struct omap24xxcam_device *cam)
-{
-	int err = 0;
-	struct v4l2_int_device *sdev = cam->sdev;
-
-	omap24xxcam_clock_on(cam);
-	err = omap24xxcam_sensor_if_enable(cam);
-	if (err) {
-		dev_err(cam->dev, "sensor interface could not be enabled at "
-			"initialisation, %d\n", err);
-		cam->sdev = NULL;
-		goto out;
-	}
-
-	/* power up sensor during sensor initialization */
-	vidioc_int_s_power(sdev, 1);
-
-	err = vidioc_int_dev_init(sdev);
-	if (err) {
-		dev_err(cam->dev, "cannot initialize sensor, error %d\n", err);
-		/* Sensor init failed --- it's nonexistent to us! */
-		cam->sdev = NULL;
-		goto out;
-	}
-
-	dev_info(cam->dev, "sensor is %s\n", sdev->name);
-
-out:
-	omap24xxcam_sensor_if_disable(cam);
-	omap24xxcam_clock_off(cam);
-
-	vidioc_int_s_power(sdev, 0);
-
-	return err;
-}
-
-static void omap24xxcam_sensor_exit(struct omap24xxcam_device *cam)
-{
-	if (cam->sdev)
-		vidioc_int_dev_exit(cam->sdev);
-}
-
-static void omap24xxcam_sensor_disable(struct omap24xxcam_device *cam)
-{
-	omap24xxcam_sensor_if_disable(cam);
-	omap24xxcam_clock_off(cam);
-	vidioc_int_s_power(cam->sdev, 0);
-}
-
-/*
- * Power-up and configure camera sensor. It's ready for capturing now.
- */
-static int omap24xxcam_sensor_enable(struct omap24xxcam_device *cam)
-{
-	int rval;
-
-	omap24xxcam_clock_on(cam);
-
-	omap24xxcam_sensor_if_enable(cam);
-
-	rval = vidioc_int_s_power(cam->sdev, 1);
-	if (rval)
-		goto out;
-
-	rval = vidioc_int_init(cam->sdev);
-	if (rval)
-		goto out;
-
-	return 0;
-
-out:
-	omap24xxcam_sensor_disable(cam);
-
-	return rval;
-}
-
-static void omap24xxcam_sensor_reset_work(struct work_struct *work)
-{
-	struct omap24xxcam_device *cam =
-		container_of(work, struct omap24xxcam_device,
-			     sensor_reset_work);
-
-	if (atomic_read(&cam->reset_disable))
-		return;
-
-	omap24xxcam_capture_stop(cam);
-
-	if (vidioc_int_reset(cam->sdev) == 0) {
-		vidioc_int_init(cam->sdev);
-	} else {
-		/* Can't reset it by vidioc_int_reset. */
-		omap24xxcam_sensor_disable(cam);
-		omap24xxcam_sensor_enable(cam);
-	}
-
-	omap24xxcam_capture_cont(cam);
-}
-
-/*
- *
- * IOCTL interface.
- *
- */
-
-static int vidioc_querycap(struct file *file, void *fh,
-			   struct v4l2_capability *cap)
-{
-	struct omap24xxcam_fh *ofh = fh;
-	struct omap24xxcam_device *cam = ofh->cam;
-
-	strlcpy(cap->driver, CAM_NAME, sizeof(cap->driver));
-	strlcpy(cap->card, cam->vfd->name, sizeof(cap->card));
-	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
-
-	return 0;
-}
-
-static int vidioc_enum_fmt_vid_cap(struct file *file, void *fh,
-				   struct v4l2_fmtdesc *f)
-{
-	struct omap24xxcam_fh *ofh = fh;
-	struct omap24xxcam_device *cam = ofh->cam;
-	int rval;
-
-	rval = vidioc_int_enum_fmt_cap(cam->sdev, f);
-
-	return rval;
-}
-
-static int vidioc_g_fmt_vid_cap(struct file *file, void *fh,
-				struct v4l2_format *f)
-{
-	struct omap24xxcam_fh *ofh = fh;
-	struct omap24xxcam_device *cam = ofh->cam;
-	int rval;
-
-	mutex_lock(&cam->mutex);
-	rval = vidioc_int_g_fmt_cap(cam->sdev, f);
-	mutex_unlock(&cam->mutex);
-
-	return rval;
-}
-
-static int vidioc_s_fmt_vid_cap(struct file *file, void *fh,
-				struct v4l2_format *f)
-{
-	struct omap24xxcam_fh *ofh = fh;
-	struct omap24xxcam_device *cam = ofh->cam;
-	int rval;
-
-	mutex_lock(&cam->mutex);
-	if (cam->streaming) {
-		rval = -EBUSY;
-		goto out;
-	}
-
-	rval = vidioc_int_s_fmt_cap(cam->sdev, f);
-
-out:
-	mutex_unlock(&cam->mutex);
-
-	if (!rval) {
-		mutex_lock(&ofh->vbq.vb_lock);
-		ofh->pix = f->fmt.pix;
-		mutex_unlock(&ofh->vbq.vb_lock);
-	}
-
-	memset(f, 0, sizeof(*f));
-	vidioc_g_fmt_vid_cap(file, fh, f);
-
-	return rval;
-}
-
-static int vidioc_try_fmt_vid_cap(struct file *file, void *fh,
-				  struct v4l2_format *f)
-{
-	struct omap24xxcam_fh *ofh = fh;
-	struct omap24xxcam_device *cam = ofh->cam;
-	int rval;
-
-	mutex_lock(&cam->mutex);
-	rval = vidioc_int_try_fmt_cap(cam->sdev, f);
-	mutex_unlock(&cam->mutex);
-
-	return rval;
-}
-
-static int vidioc_reqbufs(struct file *file, void *fh,
-			  struct v4l2_requestbuffers *b)
-{
-	struct omap24xxcam_fh *ofh = fh;
-	struct omap24xxcam_device *cam = ofh->cam;
-	int rval;
-
-	mutex_lock(&cam->mutex);
-	if (cam->streaming) {
-		mutex_unlock(&cam->mutex);
-		return -EBUSY;
-	}
-
-	omap24xxcam_vbq_free_mmap_buffers(&ofh->vbq);
-	mutex_unlock(&cam->mutex);
-
-	rval = videobuf_reqbufs(&ofh->vbq, b);
-
-	/*
-	 * Either videobuf_reqbufs failed or the buffers are not
-	 * memory-mapped (which would need special attention).
-	 */
-	if (rval < 0 || b->memory != V4L2_MEMORY_MMAP)
-		goto out;
-
-	rval = omap24xxcam_vbq_alloc_mmap_buffers(&ofh->vbq, rval);
-	if (rval)
-		omap24xxcam_vbq_free_mmap_buffers(&ofh->vbq);
-
-out:
-	return rval;
-}
-
-static int vidioc_querybuf(struct file *file, void *fh,
-			   struct v4l2_buffer *b)
-{
-	struct omap24xxcam_fh *ofh = fh;
-
-	return videobuf_querybuf(&ofh->vbq, b);
-}
-
-static int vidioc_qbuf(struct file *file, void *fh, struct v4l2_buffer *b)
-{
-	struct omap24xxcam_fh *ofh = fh;
-
-	return videobuf_qbuf(&ofh->vbq, b);
-}
-
-static int vidioc_dqbuf(struct file *file, void *fh, struct v4l2_buffer *b)
-{
-	struct omap24xxcam_fh *ofh = fh;
-	struct omap24xxcam_device *cam = ofh->cam;
-	struct videobuf_buffer *vb;
-	int rval;
-
-videobuf_dqbuf_again:
-	rval = videobuf_dqbuf(&ofh->vbq, b, file->f_flags & O_NONBLOCK);
-	if (rval)
-		goto out;
-
-	vb = ofh->vbq.bufs[b->index];
-
-	mutex_lock(&cam->mutex);
-	/* _needs_reset returns -EIO if reset is required. */
-	rval = vidioc_int_g_needs_reset(cam->sdev, (void *)vb->baddr);
-	mutex_unlock(&cam->mutex);
-	if (rval == -EIO)
-		schedule_work(&cam->sensor_reset_work);
-	else
-		rval = 0;
-
-out:
-	/*
-	 * This is a hack. We don't want to show -EIO to the user
-	 * space. Requeue the buffer and try again if we're not doing
-	 * this in non-blocking mode.
-	 */
-	if (rval == -EIO) {
-		videobuf_qbuf(&ofh->vbq, b);
-		if (!(file->f_flags & O_NONBLOCK))
-			goto videobuf_dqbuf_again;
-		/*
-		 * We don't have a videobuf_buffer now --- maybe next
-		 * time...
-		 */
-		rval = -EAGAIN;
-	}
-
-	return rval;
-}
-
-static int vidioc_streamon(struct file *file, void *fh, enum v4l2_buf_type i)
-{
-	struct omap24xxcam_fh *ofh = fh;
-	struct omap24xxcam_device *cam = ofh->cam;
-	int rval;
-
-	mutex_lock(&cam->mutex);
-	if (cam->streaming) {
-		rval = -EBUSY;
-		goto out;
-	}
-
-	rval = omap24xxcam_sensor_if_enable(cam);
-	if (rval) {
-		dev_dbg(cam->dev, "vidioc_int_g_ifparm failed\n");
-		goto out;
-	}
-
-	rval = videobuf_streamon(&ofh->vbq);
-	if (!rval) {
-		cam->streaming = file;
-		sysfs_notify(&cam->dev->kobj, NULL, "streaming");
-	}
-
-out:
-	mutex_unlock(&cam->mutex);
-
-	return rval;
-}
-
-static int vidioc_streamoff(struct file *file, void *fh, enum v4l2_buf_type i)
-{
-	struct omap24xxcam_fh *ofh = fh;
-	struct omap24xxcam_device *cam = ofh->cam;
-	struct videobuf_queue *q = &ofh->vbq;
-	int rval;
-
-	atomic_inc(&cam->reset_disable);
-
-	flush_work(&cam->sensor_reset_work);
-
-	rval = videobuf_streamoff(q);
-	if (!rval) {
-		mutex_lock(&cam->mutex);
-		cam->streaming = NULL;
-		mutex_unlock(&cam->mutex);
-		sysfs_notify(&cam->dev->kobj, NULL, "streaming");
-	}
-
-	atomic_dec(&cam->reset_disable);
-
-	return rval;
-}
-
-static int vidioc_enum_input(struct file *file, void *fh,
-			     struct v4l2_input *inp)
-{
-	if (inp->index > 0)
-		return -EINVAL;
-
-	strlcpy(inp->name, "camera", sizeof(inp->name));
-	inp->type = V4L2_INPUT_TYPE_CAMERA;
-
-	return 0;
-}
-
-static int vidioc_g_input(struct file *file, void *fh, unsigned int *i)
-{
-	*i = 0;
-
-	return 0;
-}
-
-static int vidioc_s_input(struct file *file, void *fh, unsigned int i)
-{
-	if (i > 0)
-		return -EINVAL;
-
-	return 0;
-}
-
-static int vidioc_queryctrl(struct file *file, void *fh,
-			    struct v4l2_queryctrl *a)
-{
-	struct omap24xxcam_fh *ofh = fh;
-	struct omap24xxcam_device *cam = ofh->cam;
-	int rval;
-
-	rval = vidioc_int_queryctrl(cam->sdev, a);
-
-	return rval;
-}
-
-static int vidioc_g_ctrl(struct file *file, void *fh,
-			 struct v4l2_control *a)
-{
-	struct omap24xxcam_fh *ofh = fh;
-	struct omap24xxcam_device *cam = ofh->cam;
-	int rval;
-
-	mutex_lock(&cam->mutex);
-	rval = vidioc_int_g_ctrl(cam->sdev, a);
-	mutex_unlock(&cam->mutex);
-
-	return rval;
-}
-
-static int vidioc_s_ctrl(struct file *file, void *fh,
-			 struct v4l2_control *a)
-{
-	struct omap24xxcam_fh *ofh = fh;
-	struct omap24xxcam_device *cam = ofh->cam;
-	int rval;
-
-	mutex_lock(&cam->mutex);
-	rval = vidioc_int_s_ctrl(cam->sdev, a);
-	mutex_unlock(&cam->mutex);
-
-	return rval;
-}
-
-static int vidioc_g_parm(struct file *file, void *fh,
-			 struct v4l2_streamparm *a) {
-	struct omap24xxcam_fh *ofh = fh;
-	struct omap24xxcam_device *cam = ofh->cam;
-	int rval;
-
-	mutex_lock(&cam->mutex);
-	rval = vidioc_int_g_parm(cam->sdev, a);
-	mutex_unlock(&cam->mutex);
-
-	return rval;
-}
-
-static int vidioc_s_parm(struct file *file, void *fh,
-			 struct v4l2_streamparm *a)
-{
-	struct omap24xxcam_fh *ofh = fh;
-	struct omap24xxcam_device *cam = ofh->cam;
-	struct v4l2_streamparm old_streamparm;
-	int rval;
-
-	mutex_lock(&cam->mutex);
-	if (cam->streaming) {
-		rval = -EBUSY;
-		goto out;
-	}
-
-	old_streamparm.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	rval = vidioc_int_g_parm(cam->sdev, &old_streamparm);
-	if (rval)
-		goto out;
-
-	rval = vidioc_int_s_parm(cam->sdev, a);
-	if (rval)
-		goto out;
-
-	rval = omap24xxcam_sensor_if_enable(cam);
-	/*
-	 * Revert to old streaming parameters if enabling sensor
-	 * interface with the new ones failed.
-	 */
-	if (rval)
-		vidioc_int_s_parm(cam->sdev, &old_streamparm);
-
-out:
-	mutex_unlock(&cam->mutex);
-
-	return rval;
-}
-
-/*
- *
- * File operations.
- *
- */
-
-static unsigned int omap24xxcam_poll(struct file *file,
-				     struct poll_table_struct *wait)
-{
-	struct omap24xxcam_fh *fh = file->private_data;
-	struct omap24xxcam_device *cam = fh->cam;
-	struct videobuf_buffer *vb;
-
-	mutex_lock(&cam->mutex);
-	if (cam->streaming != file) {
-		mutex_unlock(&cam->mutex);
-		return POLLERR;
-	}
-	mutex_unlock(&cam->mutex);
-
-	mutex_lock(&fh->vbq.vb_lock);
-	if (list_empty(&fh->vbq.stream)) {
-		mutex_unlock(&fh->vbq.vb_lock);
-		return POLLERR;
-	}
-	vb = list_entry(fh->vbq.stream.next, struct videobuf_buffer, stream);
-	mutex_unlock(&fh->vbq.vb_lock);
-
-	poll_wait(file, &vb->done, wait);
-
-	if (vb->state == VIDEOBUF_DONE || vb->state == VIDEOBUF_ERROR)
-		return POLLIN | POLLRDNORM;
-
-	return 0;
-}
-
-static int omap24xxcam_mmap_buffers(struct file *file,
-				    struct vm_area_struct *vma)
-{
-	struct omap24xxcam_fh *fh = file->private_data;
-	struct omap24xxcam_device *cam = fh->cam;
-	struct videobuf_queue *vbq = &fh->vbq;
-	unsigned int first, last, size, i, j;
-	int err = 0;
-
-	mutex_lock(&cam->mutex);
-	if (cam->streaming) {
-		mutex_unlock(&cam->mutex);
-		return -EBUSY;
-	}
-	mutex_unlock(&cam->mutex);
-	mutex_lock(&vbq->vb_lock);
-
-	/* look for first buffer to map */
-	for (first = 0; first < VIDEO_MAX_FRAME; first++) {
-		if (NULL == vbq->bufs[first])
-			continue;
-		if (V4L2_MEMORY_MMAP != vbq->bufs[first]->memory)
-			continue;
-		if (vbq->bufs[first]->boff == (vma->vm_pgoff << PAGE_SHIFT))
-			break;
-	}
-
-	/* look for last buffer to map */
-	for (size = 0, last = first; last < VIDEO_MAX_FRAME; last++) {
-		if (NULL == vbq->bufs[last])
-			continue;
-		if (V4L2_MEMORY_MMAP != vbq->bufs[last]->memory)
-			continue;
-		size += vbq->bufs[last]->bsize;
-		if (size == (vma->vm_end - vma->vm_start))
-			break;
-	}
-
-	size = 0;
-	for (i = first; i <= last && i < VIDEO_MAX_FRAME; i++) {
-		struct videobuf_dmabuf *dma = videobuf_to_dma(vbq->bufs[i]);
-
-		for (j = 0; j < dma->sglen; j++) {
-			err = remap_pfn_range(
-				vma, vma->vm_start + size,
-				page_to_pfn(sg_page(&dma->sglist[j])),
-				sg_dma_len(&dma->sglist[j]), vma->vm_page_prot);
-			if (err)
-				goto out;
-			size += sg_dma_len(&dma->sglist[j]);
-		}
-	}
-
-out:
-	mutex_unlock(&vbq->vb_lock);
-
-	return err;
-}
-
-static int omap24xxcam_mmap(struct file *file, struct vm_area_struct *vma)
-{
-	struct omap24xxcam_fh *fh = file->private_data;
-	int rval;
-
-	/* let the video-buf mapper check arguments and set-up structures */
-	rval = videobuf_mmap_mapper(&fh->vbq, vma);
-	if (rval)
-		return rval;
-
-	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
-
-	/* do mapping to our allocated buffers */
-	rval = omap24xxcam_mmap_buffers(file, vma);
-	/*
-	 * In case of error, free vma->vm_private_data allocated by
-	 * videobuf_mmap_mapper.
-	 */
-	if (rval)
-		kfree(vma->vm_private_data);
-
-	return rval;
-}
-
-static int omap24xxcam_open(struct file *file)
-{
-	struct omap24xxcam_device *cam = omap24xxcam.priv;
-	struct omap24xxcam_fh *fh;
-	struct v4l2_format format;
-
-	if (!cam || !cam->vfd)
-		return -ENODEV;
-
-	fh = kzalloc(sizeof(*fh), GFP_KERNEL);
-	if (fh == NULL)
-		return -ENOMEM;
-
-	mutex_lock(&cam->mutex);
-	if (cam->sdev == NULL || !try_module_get(cam->sdev->module)) {
-		mutex_unlock(&cam->mutex);
-		goto out_try_module_get;
-	}
-
-	if (atomic_inc_return(&cam->users) == 1) {
-		omap24xxcam_hwinit(cam);
-		if (omap24xxcam_sensor_enable(cam)) {
-			mutex_unlock(&cam->mutex);
-			goto out_omap24xxcam_sensor_enable;
-		}
-	}
-	mutex_unlock(&cam->mutex);
-
-	fh->cam = cam;
-	mutex_lock(&cam->mutex);
-	vidioc_int_g_fmt_cap(cam->sdev, &format);
-	mutex_unlock(&cam->mutex);
-	/* FIXME: how about fh->pix when there are more users? */
-	fh->pix = format.fmt.pix;
-
-	file->private_data = fh;
-
-	spin_lock_init(&fh->vbq_lock);
-
-	videobuf_queue_sg_init(&fh->vbq, &omap24xxcam_vbq_ops, NULL,
-				&fh->vbq_lock, V4L2_BUF_TYPE_VIDEO_CAPTURE,
-				V4L2_FIELD_NONE,
-				sizeof(struct videobuf_buffer), fh, NULL);
-
-	return 0;
-
-out_omap24xxcam_sensor_enable:
-	omap24xxcam_poweron_reset(cam);
-	module_put(cam->sdev->module);
-
-out_try_module_get:
-	kfree(fh);
-
-	return -ENODEV;
-}
-
-static int omap24xxcam_release(struct file *file)
-{
-	struct omap24xxcam_fh *fh = file->private_data;
-	struct omap24xxcam_device *cam = fh->cam;
-
-	atomic_inc(&cam->reset_disable);
-
-	flush_work(&cam->sensor_reset_work);
-
-	/* stop streaming capture */
-	videobuf_streamoff(&fh->vbq);
-
-	mutex_lock(&cam->mutex);
-	if (cam->streaming == file) {
-		cam->streaming = NULL;
-		mutex_unlock(&cam->mutex);
-		sysfs_notify(&cam->dev->kobj, NULL, "streaming");
-	} else {
-		mutex_unlock(&cam->mutex);
-	}
-
-	atomic_dec(&cam->reset_disable);
-
-	omap24xxcam_vbq_free_mmap_buffers(&fh->vbq);
-
-	/*
-	 * Make sure the reset work we might have scheduled is not
-	 * pending! It may be run *only* if we have users. (And it may
-	 * not be scheduled anymore since streaming is already
-	 * disabled.)
-	 */
-	flush_work(&cam->sensor_reset_work);
-
-	mutex_lock(&cam->mutex);
-	if (atomic_dec_return(&cam->users) == 0) {
-		omap24xxcam_sensor_disable(cam);
-		omap24xxcam_poweron_reset(cam);
-	}
-	mutex_unlock(&cam->mutex);
-
-	file->private_data = NULL;
-
-	module_put(cam->sdev->module);
-	kfree(fh);
-
-	return 0;
-}
-
-static struct v4l2_file_operations omap24xxcam_fops = {
-	.ioctl	 = video_ioctl2,
-	.poll	 = omap24xxcam_poll,
-	.mmap	 = omap24xxcam_mmap,
-	.open	 = omap24xxcam_open,
-	.release = omap24xxcam_release,
-};
-
-/*
- *
- * Power management.
- *
- */
-
-#ifdef CONFIG_PM
-static int omap24xxcam_suspend(struct platform_device *pdev, pm_message_t state)
-{
-	struct omap24xxcam_device *cam = platform_get_drvdata(pdev);
-
-	if (atomic_read(&cam->users) == 0)
-		return 0;
-
-	if (!atomic_read(&cam->reset_disable))
-		omap24xxcam_capture_stop(cam);
-
-	omap24xxcam_sensor_disable(cam);
-	omap24xxcam_poweron_reset(cam);
-
-	return 0;
-}
-
-static int omap24xxcam_resume(struct platform_device *pdev)
-{
-	struct omap24xxcam_device *cam = platform_get_drvdata(pdev);
-
-	if (atomic_read(&cam->users) == 0)
-		return 0;
-
-	omap24xxcam_hwinit(cam);
-	omap24xxcam_sensor_enable(cam);
-
-	if (!atomic_read(&cam->reset_disable))
-		omap24xxcam_capture_cont(cam);
-
-	return 0;
-}
-#endif /* CONFIG_PM */
-
-static const struct v4l2_ioctl_ops omap24xxcam_ioctl_fops = {
-	.vidioc_querycap	= vidioc_querycap,
-	.vidioc_enum_fmt_vid_cap	= vidioc_enum_fmt_vid_cap,
-	.vidioc_g_fmt_vid_cap	= vidioc_g_fmt_vid_cap,
-	.vidioc_s_fmt_vid_cap	= vidioc_s_fmt_vid_cap,
-	.vidioc_try_fmt_vid_cap	= vidioc_try_fmt_vid_cap,
-	.vidioc_reqbufs		= vidioc_reqbufs,
-	.vidioc_querybuf	= vidioc_querybuf,
-	.vidioc_qbuf		= vidioc_qbuf,
-	.vidioc_dqbuf		= vidioc_dqbuf,
-	.vidioc_streamon	= vidioc_streamon,
-	.vidioc_streamoff	= vidioc_streamoff,
-	.vidioc_enum_input	= vidioc_enum_input,
-	.vidioc_g_input		= vidioc_g_input,
-	.vidioc_s_input		= vidioc_s_input,
-	.vidioc_queryctrl	= vidioc_queryctrl,
-	.vidioc_g_ctrl		= vidioc_g_ctrl,
-	.vidioc_s_ctrl		= vidioc_s_ctrl,
-	.vidioc_g_parm		= vidioc_g_parm,
-	.vidioc_s_parm		= vidioc_s_parm,
-};
-
-/*
- *
- * Camera device (i.e. /dev/video).
- *
- */
-
-static int omap24xxcam_device_register(struct v4l2_int_device *s)
-{
-	struct omap24xxcam_device *cam = s->u.slave->master->priv;
-	struct video_device *vfd;
-	int rval;
-
-	/* We already have a slave. */
-	if (cam->sdev)
-		return -EBUSY;
-
-	cam->sdev = s;
-
-	if (device_create_file(cam->dev, &dev_attr_streaming) != 0) {
-		dev_err(cam->dev, "could not register sysfs entry\n");
-		rval = -EBUSY;
-		goto err;
-	}
-
-	/* initialize the video_device struct */
-	vfd = cam->vfd = video_device_alloc();
-	if (!vfd) {
-		dev_err(cam->dev, "could not allocate video device struct\n");
-		rval = -ENOMEM;
-		goto err;
-	}
-	vfd->release = video_device_release;
-
-	vfd->parent = cam->dev;
-
-	strlcpy(vfd->name, CAM_NAME, sizeof(vfd->name));
-	vfd->fops		 = &omap24xxcam_fops;
-	vfd->ioctl_ops		 = &omap24xxcam_ioctl_fops;
-
-	omap24xxcam_hwinit(cam);
-
-	rval = omap24xxcam_sensor_init(cam);
-	if (rval)
-		goto err;
-
-	if (video_register_device(vfd, VFL_TYPE_GRABBER, video_nr) < 0) {
-		dev_err(cam->dev, "could not register V4L device\n");
-		rval = -EBUSY;
-		goto err;
-	}
-
-	omap24xxcam_poweron_reset(cam);
-
-	dev_info(cam->dev, "registered device %s\n",
-		 video_device_node_name(vfd));
-
-	return 0;
-
-err:
-	omap24xxcam_device_unregister(s);
-
-	return rval;
-}
-
-static void omap24xxcam_device_unregister(struct v4l2_int_device *s)
-{
-	struct omap24xxcam_device *cam = s->u.slave->master->priv;
-
-	omap24xxcam_sensor_exit(cam);
-
-	if (cam->vfd) {
-		if (!video_is_registered(cam->vfd)) {
-			/*
-			 * The device was never registered, so release the
-			 * video_device struct directly.
-			 */
-			video_device_release(cam->vfd);
-		} else {
-			/*
-			 * The unregister function will release the
-			 * video_device struct as well as
-			 * unregistering it.
-			 */
-			video_unregister_device(cam->vfd);
-		}
-		cam->vfd = NULL;
-	}
-
-	device_remove_file(cam->dev, &dev_attr_streaming);
-
-	cam->sdev = NULL;
-}
-
-static struct v4l2_int_master omap24xxcam_master = {
-	.attach = omap24xxcam_device_register,
-	.detach = omap24xxcam_device_unregister,
-};
-
-static struct v4l2_int_device omap24xxcam = {
-	.module	= THIS_MODULE,
-	.name	= CAM_NAME,
-	.type	= v4l2_int_type_master,
-	.u	= {
-		.master = &omap24xxcam_master
-	},
-};
-
-/*
- *
- * Driver initialisation and deinitialisation.
- *
- */
-
-static int __devinit omap24xxcam_probe(struct platform_device *pdev)
-{
-	struct omap24xxcam_device *cam;
-	struct resource *mem;
-	int irq;
-
-	cam = kzalloc(sizeof(*cam), GFP_KERNEL);
-	if (!cam) {
-		dev_err(&pdev->dev, "could not allocate memory\n");
-		goto err;
-	}
-
-	platform_set_drvdata(pdev, cam);
-
-	cam->dev = &pdev->dev;
-
-	/*
-	 * Impose a lower limit on the amount of memory allocated for
-	 * capture. We require at least enough memory to double-buffer
-	 * QVGA (300KB).
-	 */
-	if (capture_mem < 320 * 240 * 2 * 2)
-		capture_mem = 320 * 240 * 2 * 2;
-	cam->capture_mem = capture_mem;
-
-	/* request the mem region for the camera registers */
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!mem) {
-		dev_err(cam->dev, "no mem resource?\n");
-		goto err;
-	}
-	if (!request_mem_region(mem->start, resource_size(mem), pdev->name)) {
-		dev_err(cam->dev,
-			"cannot reserve camera register I/O region\n");
-		goto err;
-	}
-	cam->mmio_base_phys = mem->start;
-	cam->mmio_size = resource_size(mem);
-
-	/* map the region */
-	cam->mmio_base = ioremap_nocache(cam->mmio_base_phys, cam->mmio_size);
-	if (!cam->mmio_base) {
-		dev_err(cam->dev, "cannot map camera register I/O region\n");
-		goto err;
-	}
-
-	irq = platform_get_irq(pdev, 0);
-	if (irq <= 0) {
-		dev_err(cam->dev, "no irq for camera?\n");
-		goto err;
-	}
-
-	/* install the interrupt service routine */
-	if (request_irq(irq, omap24xxcam_isr, 0, CAM_NAME, cam)) {
-		dev_err(cam->dev,
-			"could not install interrupt service routine\n");
-		goto err;
-	}
-	cam->irq = irq;
-
-	if (omap24xxcam_clock_get(cam))
-		goto err;
-
-	INIT_WORK(&cam->sensor_reset_work, omap24xxcam_sensor_reset_work);
-
-	mutex_init(&cam->mutex);
-	spin_lock_init(&cam->core_enable_disable_lock);
-
-	omap24xxcam_sgdma_init(&cam->sgdma,
-			       cam->mmio_base + CAMDMA_REG_OFFSET,
-			       omap24xxcam_stalled_dma_reset,
-			       (unsigned long)cam);
-
-	omap24xxcam.priv = cam;
-
-	if (v4l2_int_device_register(&omap24xxcam))
-		goto err;
-
-	return 0;
-
-err:
-	omap24xxcam_remove(pdev);
-	return -ENODEV;
-}
-
-static int omap24xxcam_remove(struct platform_device *pdev)
-{
-	struct omap24xxcam_device *cam = platform_get_drvdata(pdev);
-
-	if (!cam)
-		return 0;
-
-	if (omap24xxcam.priv != NULL)
-		v4l2_int_device_unregister(&omap24xxcam);
-	omap24xxcam.priv = NULL;
-
-	omap24xxcam_clock_put(cam);
-
-	if (cam->irq) {
-		free_irq(cam->irq, cam);
-		cam->irq = 0;
-	}
-
-	if (cam->mmio_base) {
-		iounmap((void *)cam->mmio_base);
-		cam->mmio_base = 0;
-	}
-
-	if (cam->mmio_base_phys) {
-		release_mem_region(cam->mmio_base_phys, cam->mmio_size);
-		cam->mmio_base_phys = 0;
-	}
-
-	kfree(cam);
-
-	return 0;
-}
-
-static struct platform_driver omap24xxcam_driver = {
-	.probe	 = omap24xxcam_probe,
-	.remove	 = omap24xxcam_remove,
-#ifdef CONFIG_PM
-	.suspend = omap24xxcam_suspend,
-	.resume	 = omap24xxcam_resume,
-#endif
-	.driver	 = {
-		.name = CAM_NAME,
-		.owner = THIS_MODULE,
-	},
-};
-
-module_platform_driver(omap24xxcam_driver);
-
-MODULE_AUTHOR("Sakari Ailus <sakari.ailus@nokia.com>");
-MODULE_DESCRIPTION("OMAP24xx Video for Linux camera driver");
-MODULE_LICENSE("GPL");
-MODULE_VERSION(OMAP24XXCAM_VERSION);
-module_param(video_nr, int, 0);
-MODULE_PARM_DESC(video_nr,
-		 "Minor number for video device (-1 ==> auto assign)");
-module_param(capture_mem, int, 0);
-MODULE_PARM_DESC(capture_mem, "Maximum amount of memory for capture "
-		 "buffers (default 4800kiB)");
diff --git a/drivers/media/platform/omap24xxcam.h b/drivers/media/platform/omap24xxcam.h
deleted file mode 100644
index c439595..0000000
--- a/drivers/media/platform/omap24xxcam.h
+++ /dev/null
@@ -1,593 +0,0 @@
-/*
- * drivers/media/platform/omap24xxcam.h
- *
- * Copyright (C) 2004 MontaVista Software, Inc.
- * Copyright (C) 2004 Texas Instruments.
- * Copyright (C) 2007 Nokia Corporation.
- *
- * Contact: Sakari Ailus <sakari.ailus@nokia.com>
- *
- * Based on code from Andy Lowe <source@mvista.com>.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#ifndef OMAP24XXCAM_H
-#define OMAP24XXCAM_H
-
-#include <media/videobuf-dma-sg.h>
-#include <media/v4l2-int-device.h>
-
-/*
- *
- * General driver related definitions.
- *
- */
-
-#define CAM_NAME				"omap24xxcam"
-
-#define CAM_MCLK				96000000
-
-/* number of bytes transferred per DMA request */
-#define DMA_THRESHOLD				32
-
-/*
- * NUM_CAMDMA_CHANNELS is the number of logical channels provided by
- * the camera DMA controller.
- */
-#define NUM_CAMDMA_CHANNELS			4
-
-/*
- * NUM_SG_DMA is the number of scatter-gather DMA transfers that can
- * be queued. (We don't have any overlay sglists now.)
- */
-#define NUM_SG_DMA				(VIDEO_MAX_FRAME)
-
-/*
- *
- * Register definitions.
- *
- */
-
-/* subsystem register block offsets */
-#define CC_REG_OFFSET				0x00000400
-#define CAMDMA_REG_OFFSET			0x00000800
-#define CAMMMU_REG_OFFSET			0x00000C00
-
-/* define camera subsystem register offsets */
-#define CAM_REVISION				0x000
-#define CAM_SYSCONFIG				0x010
-#define CAM_SYSSTATUS				0x014
-#define CAM_IRQSTATUS				0x018
-#define CAM_GPO					0x040
-#define CAM_GPI					0x050
-
-/* define camera core register offsets */
-#define CC_REVISION				0x000
-#define CC_SYSCONFIG				0x010
-#define CC_SYSSTATUS				0x014
-#define CC_IRQSTATUS				0x018
-#define CC_IRQENABLE				0x01C
-#define CC_CTRL					0x040
-#define CC_CTRL_DMA				0x044
-#define CC_CTRL_XCLK				0x048
-#define CC_FIFODATA				0x04C
-#define CC_TEST					0x050
-#define CC_GENPAR				0x054
-#define CC_CCPFSCR				0x058
-#define CC_CCPFECR				0x05C
-#define CC_CCPLSCR				0x060
-#define CC_CCPLECR				0x064
-#define CC_CCPDFR				0x068
-
-/* define camera dma register offsets */
-#define CAMDMA_REVISION				0x000
-#define CAMDMA_IRQSTATUS_L0			0x008
-#define CAMDMA_IRQSTATUS_L1			0x00C
-#define CAMDMA_IRQSTATUS_L2			0x010
-#define CAMDMA_IRQSTATUS_L3			0x014
-#define CAMDMA_IRQENABLE_L0			0x018
-#define CAMDMA_IRQENABLE_L1			0x01C
-#define CAMDMA_IRQENABLE_L2			0x020
-#define CAMDMA_IRQENABLE_L3			0x024
-#define CAMDMA_SYSSTATUS			0x028
-#define CAMDMA_OCP_SYSCONFIG			0x02C
-#define CAMDMA_CAPS_0				0x064
-#define CAMDMA_CAPS_2				0x06C
-#define CAMDMA_CAPS_3				0x070
-#define CAMDMA_CAPS_4				0x074
-#define CAMDMA_GCR				0x078
-#define CAMDMA_CCR(n)				(0x080 + (n)*0x60)
-#define CAMDMA_CLNK_CTRL(n)			(0x084 + (n)*0x60)
-#define CAMDMA_CICR(n)				(0x088 + (n)*0x60)
-#define CAMDMA_CSR(n)				(0x08C + (n)*0x60)
-#define CAMDMA_CSDP(n)				(0x090 + (n)*0x60)
-#define CAMDMA_CEN(n)				(0x094 + (n)*0x60)
-#define CAMDMA_CFN(n)				(0x098 + (n)*0x60)
-#define CAMDMA_CSSA(n)				(0x09C + (n)*0x60)
-#define CAMDMA_CDSA(n)				(0x0A0 + (n)*0x60)
-#define CAMDMA_CSEI(n)				(0x0A4 + (n)*0x60)
-#define CAMDMA_CSFI(n)				(0x0A8 + (n)*0x60)
-#define CAMDMA_CDEI(n)				(0x0AC + (n)*0x60)
-#define CAMDMA_CDFI(n)				(0x0B0 + (n)*0x60)
-#define CAMDMA_CSAC(n)				(0x0B4 + (n)*0x60)
-#define CAMDMA_CDAC(n)				(0x0B8 + (n)*0x60)
-#define CAMDMA_CCEN(n)				(0x0BC + (n)*0x60)
-#define CAMDMA_CCFN(n)				(0x0C0 + (n)*0x60)
-#define CAMDMA_COLOR(n)				(0x0C4 + (n)*0x60)
-
-/* define camera mmu register offsets */
-#define CAMMMU_REVISION				0x000
-#define CAMMMU_SYSCONFIG			0x010
-#define CAMMMU_SYSSTATUS			0x014
-#define CAMMMU_IRQSTATUS			0x018
-#define CAMMMU_IRQENABLE			0x01C
-#define CAMMMU_WALKING_ST			0x040
-#define CAMMMU_CNTL				0x044
-#define CAMMMU_FAULT_AD				0x048
-#define CAMMMU_TTB				0x04C
-#define CAMMMU_LOCK				0x050
-#define CAMMMU_LD_TLB				0x054
-#define CAMMMU_CAM				0x058
-#define CAMMMU_RAM				0x05C
-#define CAMMMU_GFLUSH				0x060
-#define CAMMMU_FLUSH_ENTRY			0x064
-#define CAMMMU_READ_CAM				0x068
-#define CAMMMU_READ_RAM				0x06C
-#define CAMMMU_EMU_FAULT_AD			0x070
-
-/* Define bit fields within selected registers */
-#define CAM_REVISION_MAJOR			(15 << 4)
-#define CAM_REVISION_MAJOR_SHIFT		4
-#define CAM_REVISION_MINOR			(15 << 0)
-#define CAM_REVISION_MINOR_SHIFT		0
-
-#define CAM_SYSCONFIG_SOFTRESET			(1 <<  1)
-#define CAM_SYSCONFIG_AUTOIDLE			(1 <<  0)
-
-#define CAM_SYSSTATUS_RESETDONE			(1 <<  0)
-
-#define CAM_IRQSTATUS_CC_IRQ			(1 <<  4)
-#define CAM_IRQSTATUS_MMU_IRQ			(1 <<  3)
-#define CAM_IRQSTATUS_DMA_IRQ2			(1 <<  2)
-#define CAM_IRQSTATUS_DMA_IRQ1			(1 <<  1)
-#define CAM_IRQSTATUS_DMA_IRQ0			(1 <<  0)
-
-#define CAM_GPO_CAM_S_P_EN			(1 <<  1)
-#define CAM_GPO_CAM_CCP_MODE			(1 <<  0)
-
-#define CAM_GPI_CC_DMA_REQ1			(1 << 24)
-#define CAP_GPI_CC_DMA_REQ0			(1 << 23)
-#define CAP_GPI_CAM_MSTANDBY			(1 << 21)
-#define CAP_GPI_CAM_WAIT			(1 << 20)
-#define CAP_GPI_CAM_S_DATA			(1 << 17)
-#define CAP_GPI_CAM_S_CLK			(1 << 16)
-#define CAP_GPI_CAM_P_DATA			(0xFFF << 3)
-#define CAP_GPI_CAM_P_DATA_SHIFT		3
-#define CAP_GPI_CAM_P_VS			(1 <<  2)
-#define CAP_GPI_CAM_P_HS			(1 <<  1)
-#define CAP_GPI_CAM_P_CLK			(1 <<  0)
-
-#define CC_REVISION_MAJOR			(15 << 4)
-#define CC_REVISION_MAJOR_SHIFT			4
-#define CC_REVISION_MINOR			(15 << 0)
-#define CC_REVISION_MINOR_SHIFT			0
-
-#define CC_SYSCONFIG_SIDLEMODE			(3 <<  3)
-#define CC_SYSCONFIG_SIDLEMODE_FIDLE		(0 <<  3)
-#define CC_SYSCONFIG_SIDLEMODE_NIDLE		(1 <<  3)
-#define CC_SYSCONFIG_SOFTRESET			(1 <<  1)
-#define CC_SYSCONFIG_AUTOIDLE			(1 <<  0)
-
-#define CC_SYSSTATUS_RESETDONE			(1 <<  0)
-
-#define CC_IRQSTATUS_FS_IRQ			(1 << 19)
-#define CC_IRQSTATUS_LE_IRQ			(1 << 18)
-#define CC_IRQSTATUS_LS_IRQ			(1 << 17)
-#define CC_IRQSTATUS_FE_IRQ			(1 << 16)
-#define CC_IRQSTATUS_FW_ERR_IRQ			(1 << 10)
-#define CC_IRQSTATUS_FSC_ERR_IRQ		(1 <<  9)
-#define CC_IRQSTATUS_SSC_ERR_IRQ		(1 <<  8)
-#define CC_IRQSTATUS_FIFO_NOEMPTY_IRQ		(1 <<  4)
-#define CC_IRQSTATUS_FIFO_FULL_IRQ		(1 <<  3)
-#define CC_IRQSTATUS_FIFO_THR_IRQ		(1 <<  2)
-#define CC_IRQSTATUS_FIFO_OF_IRQ		(1 <<  1)
-#define CC_IRQSTATUS_FIFO_UF_IRQ		(1 <<  0)
-
-#define CC_IRQENABLE_FS_IRQ			(1 << 19)
-#define CC_IRQENABLE_LE_IRQ			(1 << 18)
-#define CC_IRQENABLE_LS_IRQ			(1 << 17)
-#define CC_IRQENABLE_FE_IRQ			(1 << 16)
-#define CC_IRQENABLE_FW_ERR_IRQ			(1 << 10)
-#define CC_IRQENABLE_FSC_ERR_IRQ		(1 <<  9)
-#define CC_IRQENABLE_SSC_ERR_IRQ		(1 <<  8)
-#define CC_IRQENABLE_FIFO_NOEMPTY_IRQ		(1 <<  4)
-#define CC_IRQENABLE_FIFO_FULL_IRQ		(1 <<  3)
-#define CC_IRQENABLE_FIFO_THR_IRQ		(1 <<  2)
-#define CC_IRQENABLE_FIFO_OF_IRQ		(1 <<  1)
-#define CC_IRQENABLE_FIFO_UF_IRQ		(1 <<  0)
-
-#define CC_CTRL_CC_ONE_SHOT			(1 << 20)
-#define CC_CTRL_CC_IF_SYNCHRO			(1 << 19)
-#define CC_CTRL_CC_RST				(1 << 18)
-#define CC_CTRL_CC_FRAME_TRIG			(1 << 17)
-#define CC_CTRL_CC_EN				(1 << 16)
-#define CC_CTRL_NOBT_SYNCHRO			(1 << 13)
-#define CC_CTRL_BT_CORRECT			(1 << 12)
-#define CC_CTRL_PAR_ORDERCAM			(1 << 11)
-#define CC_CTRL_PAR_CLK_POL			(1 << 10)
-#define CC_CTRL_NOBT_HS_POL			(1 <<  9)
-#define CC_CTRL_NOBT_VS_POL			(1 <<  8)
-#define CC_CTRL_PAR_MODE			(7 <<  1)
-#define CC_CTRL_PAR_MODE_SHIFT			1
-#define CC_CTRL_PAR_MODE_NOBT8			(0 <<  1)
-#define CC_CTRL_PAR_MODE_NOBT10			(1 <<  1)
-#define CC_CTRL_PAR_MODE_NOBT12			(2 <<  1)
-#define CC_CTRL_PAR_MODE_BT8			(4 <<  1)
-#define CC_CTRL_PAR_MODE_BT10			(5 <<  1)
-#define CC_CTRL_PAR_MODE_FIFOTEST		(7 <<  1)
-#define CC_CTRL_CCP_MODE			(1 <<  0)
-
-#define CC_CTRL_DMA_EN				(1 <<  8)
-#define CC_CTRL_DMA_FIFO_THRESHOLD		(0x7F << 0)
-#define CC_CTRL_DMA_FIFO_THRESHOLD_SHIFT	0
-
-#define CC_CTRL_XCLK_DIV			(0x1F << 0)
-#define CC_CTRL_XCLK_DIV_SHIFT			0
-#define CC_CTRL_XCLK_DIV_STABLE_LOW		(0 <<  0)
-#define CC_CTRL_XCLK_DIV_STABLE_HIGH		(1 <<  0)
-#define CC_CTRL_XCLK_DIV_BYPASS			(31 << 0)
-
-#define CC_TEST_FIFO_RD_POINTER			(0xFF << 24)
-#define CC_TEST_FIFO_RD_POINTER_SHIFT		24
-#define CC_TEST_FIFO_WR_POINTER			(0xFF << 16)
-#define CC_TEST_FIFO_WR_POINTER_SHIFT		16
-#define CC_TEST_FIFO_LEVEL			(0xFF <<  8)
-#define CC_TEST_FIFO_LEVEL_SHIFT		8
-#define CC_TEST_FIFO_LEVEL_PEAK			(0xFF <<  0)
-#define CC_TEST_FIFO_LEVEL_PEAK_SHIFT		0
-
-#define CC_GENPAR_FIFO_DEPTH			(7 <<  0)
-#define CC_GENPAR_FIFO_DEPTH_SHIFT		0
-
-#define CC_CCPDFR_ALPHA				(0xFF <<  8)
-#define CC_CCPDFR_ALPHA_SHIFT			8
-#define CC_CCPDFR_DATAFORMAT			(15 <<  0)
-#define CC_CCPDFR_DATAFORMAT_SHIFT		0
-#define CC_CCPDFR_DATAFORMAT_YUV422BE		(0 <<  0)
-#define CC_CCPDFR_DATAFORMAT_YUV422		(1 <<  0)
-#define CC_CCPDFR_DATAFORMAT_YUV420		(2 <<  0)
-#define CC_CCPDFR_DATAFORMAT_RGB444		(4 <<  0)
-#define CC_CCPDFR_DATAFORMAT_RGB565		(5 <<  0)
-#define CC_CCPDFR_DATAFORMAT_RGB888NDE		(6 <<  0)
-#define CC_CCPDFR_DATAFORMAT_RGB888		(7 <<  0)
-#define CC_CCPDFR_DATAFORMAT_RAW8NDE		(8 <<  0)
-#define CC_CCPDFR_DATAFORMAT_RAW8		(9 <<  0)
-#define CC_CCPDFR_DATAFORMAT_RAW10NDE		(10 <<  0)
-#define CC_CCPDFR_DATAFORMAT_RAW10		(11 <<  0)
-#define CC_CCPDFR_DATAFORMAT_RAW12NDE		(12 <<  0)
-#define CC_CCPDFR_DATAFORMAT_RAW12		(13 <<  0)
-#define CC_CCPDFR_DATAFORMAT_JPEG8		(15 <<  0)
-
-#define CAMDMA_REVISION_MAJOR			(15 << 4)
-#define CAMDMA_REVISION_MAJOR_SHIFT		4
-#define CAMDMA_REVISION_MINOR			(15 << 0)
-#define CAMDMA_REVISION_MINOR_SHIFT		0
-
-#define CAMDMA_OCP_SYSCONFIG_MIDLEMODE		(3 << 12)
-#define CAMDMA_OCP_SYSCONFIG_MIDLEMODE_FSTANDBY	(0 << 12)
-#define CAMDMA_OCP_SYSCONFIG_MIDLEMODE_NSTANDBY	(1 << 12)
-#define CAMDMA_OCP_SYSCONFIG_MIDLEMODE_SSTANDBY	(2 << 12)
-#define CAMDMA_OCP_SYSCONFIG_FUNC_CLOCK		(1 <<  9)
-#define CAMDMA_OCP_SYSCONFIG_OCP_CLOCK		(1 <<  8)
-#define CAMDMA_OCP_SYSCONFIG_EMUFREE		(1 <<  5)
-#define CAMDMA_OCP_SYSCONFIG_SIDLEMODE		(3 <<  3)
-#define CAMDMA_OCP_SYSCONFIG_SIDLEMODE_FIDLE	(0 <<  3)
-#define CAMDMA_OCP_SYSCONFIG_SIDLEMODE_NIDLE	(1 <<  3)
-#define CAMDMA_OCP_SYSCONFIG_SIDLEMODE_SIDLE	(2 <<  3)
-#define CAMDMA_OCP_SYSCONFIG_SOFTRESET		(1 <<  1)
-#define CAMDMA_OCP_SYSCONFIG_AUTOIDLE		(1 <<  0)
-
-#define CAMDMA_SYSSTATUS_RESETDONE		(1 <<  0)
-
-#define CAMDMA_GCR_ARBITRATION_RATE		(0xFF << 16)
-#define CAMDMA_GCR_ARBITRATION_RATE_SHIFT	16
-#define CAMDMA_GCR_MAX_CHANNEL_FIFO_DEPTH	(0xFF << 0)
-#define CAMDMA_GCR_MAX_CHANNEL_FIFO_DEPTH_SHIFT	0
-
-#define CAMDMA_CCR_SEL_SRC_DST_SYNC		(1 << 24)
-#define CAMDMA_CCR_PREFETCH			(1 << 23)
-#define CAMDMA_CCR_SUPERVISOR			(1 << 22)
-#define CAMDMA_CCR_SECURE			(1 << 21)
-#define CAMDMA_CCR_BS				(1 << 18)
-#define CAMDMA_CCR_TRANSPARENT_COPY_ENABLE	(1 << 17)
-#define CAMDMA_CCR_CONSTANT_FILL_ENABLE		(1 << 16)
-#define CAMDMA_CCR_DST_AMODE			(3 << 14)
-#define CAMDMA_CCR_DST_AMODE_CONST_ADDR		(0 << 14)
-#define CAMDMA_CCR_DST_AMODE_POST_INC		(1 << 14)
-#define CAMDMA_CCR_DST_AMODE_SGL_IDX		(2 << 14)
-#define CAMDMA_CCR_DST_AMODE_DBL_IDX		(3 << 14)
-#define CAMDMA_CCR_SRC_AMODE			(3 << 12)
-#define CAMDMA_CCR_SRC_AMODE_CONST_ADDR		(0 << 12)
-#define CAMDMA_CCR_SRC_AMODE_POST_INC		(1 << 12)
-#define CAMDMA_CCR_SRC_AMODE_SGL_IDX		(2 << 12)
-#define CAMDMA_CCR_SRC_AMODE_DBL_IDX		(3 << 12)
-#define CAMDMA_CCR_WR_ACTIVE			(1 << 10)
-#define CAMDMA_CCR_RD_ACTIVE			(1 <<  9)
-#define CAMDMA_CCR_SUSPEND_SENSITIVE		(1 <<  8)
-#define CAMDMA_CCR_ENABLE			(1 <<  7)
-#define CAMDMA_CCR_PRIO				(1 <<  6)
-#define CAMDMA_CCR_FS				(1 <<  5)
-#define CAMDMA_CCR_SYNCHRO			((3 << 19) | (31 << 0))
-#define CAMDMA_CCR_SYNCHRO_CAMERA		0x01
-
-#define CAMDMA_CLNK_CTRL_ENABLE_LNK		(1 << 15)
-#define CAMDMA_CLNK_CTRL_NEXTLCH_ID		(0x1F << 0)
-#define CAMDMA_CLNK_CTRL_NEXTLCH_ID_SHIFT	0
-
-#define CAMDMA_CICR_MISALIGNED_ERR_IE		(1 << 11)
-#define CAMDMA_CICR_SUPERVISOR_ERR_IE		(1 << 10)
-#define CAMDMA_CICR_SECURE_ERR_IE		(1 <<  9)
-#define CAMDMA_CICR_TRANS_ERR_IE		(1 <<  8)
-#define CAMDMA_CICR_PACKET_IE			(1 <<  7)
-#define CAMDMA_CICR_BLOCK_IE			(1 <<  5)
-#define CAMDMA_CICR_LAST_IE			(1 <<  4)
-#define CAMDMA_CICR_FRAME_IE			(1 <<  3)
-#define CAMDMA_CICR_HALF_IE			(1 <<  2)
-#define CAMDMA_CICR_DROP_IE			(1 <<  1)
-
-#define CAMDMA_CSR_MISALIGNED_ERR		(1 << 11)
-#define CAMDMA_CSR_SUPERVISOR_ERR		(1 << 10)
-#define CAMDMA_CSR_SECURE_ERR			(1 <<  9)
-#define CAMDMA_CSR_TRANS_ERR			(1 <<  8)
-#define CAMDMA_CSR_PACKET			(1 <<  7)
-#define CAMDMA_CSR_SYNC				(1 <<  6)
-#define CAMDMA_CSR_BLOCK			(1 <<  5)
-#define CAMDMA_CSR_LAST				(1 <<  4)
-#define CAMDMA_CSR_FRAME			(1 <<  3)
-#define CAMDMA_CSR_HALF				(1 <<  2)
-#define CAMDMA_CSR_DROP				(1 <<  1)
-
-#define CAMDMA_CSDP_SRC_ENDIANNESS		(1 << 21)
-#define CAMDMA_CSDP_SRC_ENDIANNESS_LOCK		(1 << 20)
-#define CAMDMA_CSDP_DST_ENDIANNESS		(1 << 19)
-#define CAMDMA_CSDP_DST_ENDIANNESS_LOCK		(1 << 18)
-#define CAMDMA_CSDP_WRITE_MODE			(3 << 16)
-#define CAMDMA_CSDP_WRITE_MODE_WRNP		(0 << 16)
-#define CAMDMA_CSDP_WRITE_MODE_POSTED		(1 << 16)
-#define CAMDMA_CSDP_WRITE_MODE_POSTED_LAST_WRNP	(2 << 16)
-#define CAMDMA_CSDP_DST_BURST_EN		(3 << 14)
-#define CAMDMA_CSDP_DST_BURST_EN_1		(0 << 14)
-#define CAMDMA_CSDP_DST_BURST_EN_16		(1 << 14)
-#define CAMDMA_CSDP_DST_BURST_EN_32		(2 << 14)
-#define CAMDMA_CSDP_DST_BURST_EN_64		(3 << 14)
-#define CAMDMA_CSDP_DST_PACKED			(1 << 13)
-#define CAMDMA_CSDP_WR_ADD_TRSLT		(15 << 9)
-#define CAMDMA_CSDP_WR_ADD_TRSLT_ENABLE_MREQADD	(3 <<  9)
-#define CAMDMA_CSDP_SRC_BURST_EN		(3 <<  7)
-#define CAMDMA_CSDP_SRC_BURST_EN_1		(0 <<  7)
-#define CAMDMA_CSDP_SRC_BURST_EN_16		(1 <<  7)
-#define CAMDMA_CSDP_SRC_BURST_EN_32		(2 <<  7)
-#define CAMDMA_CSDP_SRC_BURST_EN_64		(3 <<  7)
-#define CAMDMA_CSDP_SRC_PACKED			(1 <<  6)
-#define CAMDMA_CSDP_RD_ADD_TRSLT		(15 << 2)
-#define CAMDMA_CSDP_RD_ADD_TRSLT_ENABLE_MREQADD	(3 <<  2)
-#define CAMDMA_CSDP_DATA_TYPE			(3 <<  0)
-#define CAMDMA_CSDP_DATA_TYPE_8BITS		(0 <<  0)
-#define CAMDMA_CSDP_DATA_TYPE_16BITS		(1 <<  0)
-#define CAMDMA_CSDP_DATA_TYPE_32BITS		(2 <<  0)
-
-#define CAMMMU_SYSCONFIG_AUTOIDLE		(1 <<  0)
-
-/*
- *
- * Declarations.
- *
- */
-
-/* forward declarations */
-struct omap24xxcam_sgdma;
-struct omap24xxcam_dma;
-
-typedef void (*sgdma_callback_t)(struct omap24xxcam_sgdma *cam,
-				 u32 status, void *arg);
-typedef void (*dma_callback_t)(struct omap24xxcam_dma *cam,
-			       u32 status, void *arg);
-
-struct channel_state {
-	dma_callback_t callback;
-	void *arg;
-};
-
-/* sgdma state for each of the possible videobuf_buffers + 2 overlays */
-struct sgdma_state {
-	const struct scatterlist *sglist;
-	int sglen;		 /* number of sglist entries */
-	int next_sglist;	 /* index of next sglist entry to process */
-	unsigned int bytes_read; /* number of bytes read */
-	unsigned int len;        /* total length of sglist (excluding
-				  * bytes due to page alignment) */
-	int queued_sglist;	 /* number of sglist entries queued for DMA */
-	u32 csr;		 /* DMA return code */
-	sgdma_callback_t callback;
-	void *arg;
-};
-
-/* physical DMA channel management */
-struct omap24xxcam_dma {
-	spinlock_t lock;	/* Lock for the whole structure. */
-
-	void __iomem *base;	/* base address for dma controller */
-
-	/* While dma_stop!=0, an attempt to start a new DMA transfer will
-	 * fail.
-	 */
-	atomic_t dma_stop;
-	int free_dmach;		/* number of dma channels free */
-	int next_dmach;		/* index of next dma channel to use */
-	struct channel_state ch_state[NUM_CAMDMA_CHANNELS];
-};
-
-/* scatter-gather DMA (scatterlist stuff) management */
-struct omap24xxcam_sgdma {
-	struct omap24xxcam_dma dma;
-
-	spinlock_t lock;	/* Lock for the fields below. */
-	int free_sgdma;		/* number of free sg dma slots */
-	int next_sgdma;		/* index of next sg dma slot to use */
-	struct sgdma_state sg_state[NUM_SG_DMA];
-
-	/* Reset timer data */
-	struct timer_list reset_timer;
-};
-
-/* per-device data structure */
-struct omap24xxcam_device {
-	/*** mutex  ***/
-	/*
-	 * mutex serialises access to this structure. Also camera
-	 * opening and releasing is synchronised by this.
-	 */
-	struct mutex mutex;
-
-	/*** general driver state information ***/
-	atomic_t users;
-	/*
-	 * Lock to serialise core enabling and disabling and access to
-	 * sgdma_in_queue.
-	 */
-	spinlock_t core_enable_disable_lock;
-	/*
-	 * Number or sgdma requests in scatter-gather queue, protected
-	 * by the lock above.
-	 */
-	int sgdma_in_queue;
-	/*
-	 * Sensor interface parameters: interface type, CC_CTRL
-	 * register value and interface specific data.
-	 */
-	int if_type;
-	union {
-		struct parallel {
-			u32 xclk;
-		} bt656;
-	} if_u;
-	u32 cc_ctrl;
-
-	/*** subsystem structures ***/
-	struct omap24xxcam_sgdma sgdma;
-
-	/*** hardware resources ***/
-	unsigned int irq;
-	void __iomem *mmio_base;
-	unsigned long mmio_base_phys;
-	unsigned long mmio_size;
-
-	/*** interfaces and device ***/
-	struct v4l2_int_device *sdev;
-	struct device *dev;
-	struct video_device *vfd;
-
-	/*** camera and sensor reset related stuff ***/
-	struct work_struct sensor_reset_work;
-	/*
-	 * We're in the middle of a reset. Don't enable core if this
-	 * is non-zero! This exists to help decisionmaking in a case
-	 * where videobuf_qbuf is called while we are in the middle of
-	 * a reset.
-	 */
-	atomic_t in_reset;
-	/*
-	 * Non-zero if we don't want any resets for now. Used to
-	 * prevent reset work to run when we're about to stop
-	 * streaming.
-	 */
-	atomic_t reset_disable;
-
-	/*** video device parameters ***/
-	int capture_mem;
-
-	/*** camera module clocks ***/
-	struct clk *fck;
-	struct clk *ick;
-
-	/*** capture data ***/
-	/* file handle, if streaming is on */
-	struct file *streaming;
-};
-
-/* Per-file handle data. */
-struct omap24xxcam_fh {
-	spinlock_t vbq_lock; /* spinlock for the videobuf queue */
-	struct videobuf_queue vbq;
-	struct v4l2_pix_format pix; /* serialise pix by vbq->lock */
-	atomic_t field_count; /* field counter for videobuf_buffer */
-	/* accessing cam here doesn't need serialisation: it's constant */
-	struct omap24xxcam_device *cam;
-};
-
-/*
- *
- * Register I/O functions.
- *
- */
-
-static inline u32 omap24xxcam_reg_in(u32 __iomem *base, u32 offset)
-{
-	return readl(base + offset);
-}
-
-static inline u32 omap24xxcam_reg_out(u32 __iomem *base, u32 offset,
-					  u32 val)
-{
-	writel(val, base + offset);
-	return val;
-}
-
-static inline u32 omap24xxcam_reg_merge(u32 __iomem *base, u32 offset,
-					    u32 val, u32 mask)
-{
-	u32 __iomem *addr = base + offset;
-	u32 new_val = (readl(addr) & ~mask) | (val & mask);
-
-	writel(new_val, addr);
-	return new_val;
-}
-
-/*
- *
- * Function prototypes.
- *
- */
-
-/* dma prototypes */
-
-void omap24xxcam_dma_hwinit(struct omap24xxcam_dma *dma);
-void omap24xxcam_dma_isr(struct omap24xxcam_dma *dma);
-
-/* sgdma prototypes */
-
-void omap24xxcam_sgdma_process(struct omap24xxcam_sgdma *sgdma);
-int omap24xxcam_sgdma_queue(struct omap24xxcam_sgdma *sgdma,
-			    const struct scatterlist *sglist, int sglen,
-			    int len, sgdma_callback_t callback, void *arg);
-void omap24xxcam_sgdma_sync(struct omap24xxcam_sgdma *sgdma);
-void omap24xxcam_sgdma_init(struct omap24xxcam_sgdma *sgdma,
-			    void __iomem *base,
-			    void (*reset_callback)(unsigned long data),
-			    unsigned long reset_callback_data);
-void omap24xxcam_sgdma_exit(struct omap24xxcam_sgdma *sgdma);
-
-#endif
