| Message ID | 1370533542-4432-1-git-send-email-gennarone@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
diff --git a/drivers/media/tuners/r820t.c b/drivers/media/tuners/r820t.c index 4835021..b817110 100644 --- a/drivers/media/tuners/r820t.c +++ b/drivers/media/tuners/r820t.c @@ -1857,9 +1857,9 @@ static int r820t_imr(struct r820t_priv *priv, unsigned imr_mem, bool im_flag) int reg18, reg19, reg1f; if (priv->cfg->xtal > 24000000) - ring_ref = priv->cfg->xtal / 2; + ring_ref = priv->cfg->xtal / 2000; else - ring_ref = priv->cfg->xtal; + ring_ref = priv->cfg->xtal / 1000; n_ring = 15; for (n = 0; n < 16; n++) {
The r820t_imr() calibration function of the Rafael Micro R820T tuner generates this error at every tune attempt: r820t 0-001a: No valid PLL values for 2252021 kHz! The function was inspired by the original Realtek driver for rtl2832 devices with the r820t tuner; anyway, in the original code the XTAL frequency of the tuner was expressed in KHz, while in the kernel driver it is expressed in Hz; so the calibration failed because of an out-of-range initial value. The final result of the computation is then passed to the r820t_set_mux() and r820t_set_pll() functions, but the conversion from KHz to Hz is already correctly implemented. Signed-off-by: Gianluca Gennari <gennarone@gmail.com> --- drivers/media/tuners/r820t.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)