@@ -1,8 +1,12 @@
config VIDEO_EM28XX
- tristate "Empia EM28xx USB video capture support"
+ tristate "Empia EM28xx USB devices support"
depends on VIDEO_DEV && I2C
select VIDEO_TUNER
select VIDEO_TVEEPROM
+
+config VIDEO_EM28XX_V4L2
+ tristate "Empia EM28xx analog TV, video capture and/or webcam support"
+ depends on VIDEO_EM28XX && I2C
select VIDEOBUF2_VMALLOC
select VIDEO_SAA711X if MEDIA_SUBDRV_AUTOSELECT
select VIDEO_TVP5150 if MEDIA_SUBDRV_AUTOSELECT
@@ -1,10 +1,11 @@
-em28xx-y += em28xx-video.o em28xx-i2c.o em28xx-cards.o
-em28xx-y += em28xx-core.o em28xx-vbi.o em28xx-camera.o
+em28xx-y += em28xx-core.o em28xx-i2c.o em28xx-cards.o em28xx-camera.o
+em28xx-v4l-objs := em28xx-video.o em28xx-vbi.o
em28xx-alsa-objs := em28xx-audio.o
em28xx-rc-objs := em28xx-input.o
obj-$(CONFIG_VIDEO_EM28XX) += em28xx.o
+obj-$(CONFIG_VIDEO_EM28XX_V4L2) += em28xx-v4l.o
obj-$(CONFIG_VIDEO_EM28XX_ALSA) += em28xx-alsa.o
obj-$(CONFIG_VIDEO_EM28XX_DVB) += em28xx-dvb.o
obj-$(CONFIG_VIDEO_EM28XX_RC) += em28xx-rc.o
@@ -454,3 +454,4 @@ int em28xx_init_camera(struct em28xx *dev)
return ret;
}
+EXPORT_SYMBOL_GPL(em28xx_init_camera);
@@ -2159,6 +2159,8 @@ struct em28xx_board em28xx_boards[] = {
.ir_codes = RC_MAP_PINNACLE_PCTV_HD,
},
};
+EXPORT_SYMBOL_GPL(em28xx_boards);
+
const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
/* table of devices that work with this driver */
@@ -2827,10 +2829,6 @@ static void em28xx_card_setup(struct em28xx *dev)
"tuner", dev->tuner_addr, NULL);
}
}
-
- em28xx_tuner_setup(dev);
-
- em28xx_init_camera(dev);
}
@@ -2848,11 +2846,12 @@ static void request_module_async(struct work_struct *work)
em28xx_init_extension(dev);
#if defined(CONFIG_MODULES) && defined(MODULE)
+ if (dev->has_video)
+ request_module("em28xx-v4l");
if (dev->has_audio_class)
request_module("snd-usb-audio");
else if (dev->has_alsa_audio)
request_module("em28xx-alsa");
-
if (dev->board.has_dvb)
request_module("em28xx-dvb");
if (dev->board.buttons ||
@@ -2881,18 +2880,12 @@ void em28xx_release_resources(struct em28xx *dev)
{
/*FIXME: I2C IR should be disconnected */
- em28xx_release_analog_resources(dev);
-
if (dev->def_i2c_bus)
em28xx_i2c_unregister(dev, 1);
em28xx_i2c_unregister(dev, 0);
if (dev->clk)
v4l2_clk_unregister_fixed(dev->clk);
- v4l2_ctrl_handler_free(&dev->ctrl_handler);
-
- v4l2_device_unregister(&dev->v4l2_dev);
-
usb_put_dev(dev->udev);
/* Mark device as unused */
@@ -3277,6 +3270,7 @@ static int em28xx_usb_probe(struct usb_interface *interface,
dev->alt = -1;
dev->is_audio_only = has_audio && !(has_video || has_dvb);
dev->has_alsa_audio = has_audio;
+ dev->has_video = has_video;
dev->audio_ifnum = ifnum;
/* Checks if audio is provided by some interface */
@@ -3316,10 +3310,9 @@ static int em28xx_usb_probe(struct usb_interface *interface,
/* allocate device struct */
mutex_init(&dev->lock);
- mutex_lock(&dev->lock);
retval = em28xx_init_dev(dev, udev, interface, nr);
if (retval) {
- goto unlock_and_free;
+ goto err_free;
}
if (usb_xfer_mode < 0) {
@@ -3362,7 +3355,7 @@ static int em28xx_usb_probe(struct usb_interface *interface,
if (retval) {
printk(DRIVER_NAME
": Failed to pre-allocate USB transfer buffers for DVB.\n");
- goto unlock_and_free;
+ goto err_free;
}
}
@@ -3371,13 +3364,9 @@ static int em28xx_usb_probe(struct usb_interface *interface,
/* Should be the last thing to do, to avoid newer udev's to
open the device before fully initializing it
*/
- mutex_unlock(&dev->lock);
return 0;
-unlock_and_free:
- mutex_unlock(&dev->lock);
-
err_free:
kfree(dev->alt_max_pkt_size_isoc);
kfree(dev);
@@ -33,6 +33,18 @@
#include "em28xx.h"
+#define DRIVER_AUTHOR "Ludovico Cavedon <cavedon@sssup.it>, " \
+ "Markus Rechberger <mrechberger@gmail.com>, " \
+ "Mauro Carvalho Chehab <mchehab@infradead.org>, " \
+ "Sascha Sommer <saschasommer@freenet.de>"
+
+#define DRIVER_DESC "Empia em28xx based USB core driver"
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+MODULE_VERSION(EM28XX_VERSION);
+
/* #define ENABLE_DEBUG_ISOC_FRAMES */
static unsigned int core_debug;
new file mode 100644
@@ -0,0 +1,24 @@
+/*
+ em28xx-video.c - driver for Empia EM2800/EM2820/2840 USB
+ video capture devices
+
+ Copyright (C) 2013 Mauro Carvalho Chehab <m.chehab@samsung.com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation version 2 of the License.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+int em28xx_start_analog_streaming(struct vb2_queue *vq, unsigned int count);
+int em28xx_stop_vbi_streaming(struct vb2_queue *vq);
+extern struct vb2_ops em28xx_vbi_qops;
@@ -27,6 +27,7 @@
#include <linux/init.h>
#include "em28xx.h"
+#include "em28xx-v4l.h"
static unsigned int vbibufs = 5;
module_param(vbibufs, int, 0644);
@@ -38,6 +38,7 @@
#include <linux/slab.h>
#include "em28xx.h"
+#include "em28xx-v4l.h"
#include <media/v4l2-common.h>
#include <media/v4l2-ioctl.h>
#include <media/v4l2-event.h>
@@ -141,11 +142,13 @@ static struct em28xx_fmt format[] = {
},
};
+static int em28xx_vbi_supported(struct em28xx *dev);
+
/*
* em28xx_wake_i2c()
* configure i2c attached devices
*/
-void em28xx_wake_i2c(struct em28xx *dev)
+static void em28xx_wake_i2c(struct em28xx *dev)
{
v4l2_device_call_all(&dev->v4l2_dev, 0, core, reset, 0);
v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_routing,
@@ -153,7 +156,7 @@ void em28xx_wake_i2c(struct em28xx *dev)
v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_stream, 0);
}
-int em28xx_colorlevels_set_default(struct em28xx *dev)
+static int em28xx_colorlevels_set_default(struct em28xx *dev)
{
em28xx_write_reg(dev, EM28XX_R20_YGAIN, CONTRAST_DEFAULT);
em28xx_write_reg(dev, EM28XX_R21_YOFFSET, BRIGHTNESS_DEFAULT);
@@ -171,7 +174,7 @@ int em28xx_colorlevels_set_default(struct em28xx *dev)
return em28xx_write_reg(dev, EM28XX_R1A_BOFFSET, 0x00);
}
-int em28xx_set_outfmt(struct em28xx *dev)
+static int em28xx_set_outfmt(struct em28xx *dev)
{
int ret;
u8 fmt, vinctrl;
@@ -278,7 +281,7 @@ static int em28xx_scaler_set(struct em28xx *dev, u16 h, u16 v)
}
/* FIXME: this only function read values from dev */
-int em28xx_resolution_set(struct em28xx *dev)
+static int em28xx_resolution_set(struct em28xx *dev)
{
int width, height;
width = norm_maxw(dev);
@@ -310,7 +313,7 @@ int em28xx_resolution_set(struct em28xx *dev)
return em28xx_scaler_set(dev, dev->hscale, dev->vscale);
}
-int em28xx_vbi_supported(struct em28xx *dev)
+static int em28xx_vbi_supported(struct em28xx *dev)
{
/* Modprobe option to manually disable */
if (disable_vbi == 1)
@@ -330,7 +333,7 @@ int em28xx_vbi_supported(struct em28xx *dev)
}
/* Set USB alternate setting for analog video */
-int em28xx_set_alternate(struct em28xx *dev)
+static int em28xx_set_alternate(struct em28xx *dev)
{
int errCode;
int i;
@@ -1020,7 +1023,7 @@ static struct vb2_ops em28xx_video_qops = {
.wait_finish = vb2_ops_wait_finish,
};
-int em28xx_vb2_setup(struct em28xx *dev)
+static int em28xx_vb2_setup(struct em28xx *dev)
{
int rc;
struct vb2_queue *q;
@@ -1088,7 +1091,7 @@ static void video_mux(struct em28xx *dev, int index)
em28xx_audio_analog_set(dev);
}
-void em28xx_ctrl_notify(struct v4l2_ctrl *ctrl, void *priv)
+static void em28xx_ctrl_notify(struct v4l2_ctrl *ctrl, void *priv)
{
struct em28xx *dev = priv;
@@ -1625,7 +1628,7 @@ static int vidioc_g_register(struct file *file, void *priv,
reg->val = ret;
} else {
__le16 val = 0;
- ret = em28xx_read_reg_req_len(dev, USB_REQ_GET_STATUS,
+ ret = dev->em28xx_read_reg_req_len(dev, USB_REQ_GET_STATUS,
reg->reg, (char *)&val, 2);
if (ret < 0)
return ret;
@@ -1872,11 +1875,11 @@ static int em28xx_v4l2_open(struct file *filp)
}
/*
- * em28xx_realease_resources()
+ * em28xx_v4l2_fini()
* unregisters the v4l2,i2c and usb devices
* called when the device gets disconected or at module unload
*/
-void em28xx_release_analog_resources(struct em28xx *dev)
+static int em28xx_v4l2_fini(struct em28xx *dev)
{
/*FIXME: I2C IR should be disconnected */
@@ -1906,6 +1909,8 @@ void em28xx_release_analog_resources(struct em28xx *dev)
video_device_release(dev->vdev);
dev->vdev = NULL;
}
+
+ return 0;
}
/*
@@ -1924,16 +1929,18 @@ static int em28xx_v4l2_close(struct file *filp)
vb2_fop_release(filp);
mutex_lock(&dev->lock);
+ if (dev->disconnected) {
+ v4l2_ctrl_handler_free(&dev->ctrl_handler);
+ v4l2_device_unregister(&dev->v4l2_dev);
+
+ kfree(dev->alt_max_pkt_size_isoc);
+ dev->users = 0;
+ goto exit;
+ }
+
if (dev->users == 1) {
/* the device is already disconnect,
free the remaining resources */
- if (dev->disconnected) {
- em28xx_release_resources(dev);
- kfree(dev->alt_max_pkt_size_isoc);
- mutex_unlock(&dev->lock);
- kfree(dev);
- return 0;
- }
/* Save some power by putting tuner to sleep */
v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_power, 0);
@@ -1952,6 +1959,7 @@ static int em28xx_v4l2_close(struct file *filp)
}
dev->users--;
+exit:
mutex_unlock(&dev->lock);
return 0;
}
@@ -2047,8 +2055,6 @@ static struct video_device em28xx_radio_template = {
/******************************** usb interface ******************************/
-
-
static struct video_device *em28xx_vdev_init(struct em28xx *dev,
const struct video_device *template,
const char *type_name)
@@ -2122,7 +2128,7 @@ static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
}
}
-void em28xx_tuner_setup(struct em28xx *dev)
+static void em28xx_tuner_setup(struct em28xx *dev)
{
struct tuner_setup tun_setup;
struct v4l2_frequency f;
@@ -2181,7 +2187,7 @@ void em28xx_tuner_setup(struct em28xx *dev)
v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f);
}
-int em28xx_register_analog_devices(struct em28xx *dev)
+static int em28xx_v4l2_init(struct em28xx *dev)
{
u8 val;
int ret;
@@ -2214,6 +2220,10 @@ int em28xx_register_analog_devices(struct em28xx *dev)
dev->vinctl = EM28XX_VINCTRL_INTERLACED |
EM28XX_VINCTRL_CCIR656_ENABLE;
+ /* Initialize tuner and camera */
+ em28xx_tuner_setup(dev);
+ em28xx_init_camera(dev);
+
/* Configure audio */
ret = em28xx_audio_setup(dev);
if (ret < 0) {
@@ -2424,7 +2434,28 @@ int em28xx_register_analog_devices(struct em28xx *dev)
/* initialize videobuf2 stuff */
em28xx_vb2_setup(dev);
- return 0;
err:
+ mutex_unlock(&dev->lock);
+ return ret;
+}
+
+static struct em28xx_ops v4l2_ops = {
+ .id = EM28XX_V4L2,
+ .name = "Em28xx v4l2 Extension",
+ .init = em28xx_v4l2_init,
+ .fini = em28xx_v4l2_fini,
+};
+
+static int __init em28xx_dvb_register(void)
+{
+ return em28xx_register_extension(&v4l2_ops);
}
+
+static void __exit em28xx_dvb_unregister(void)
+{
+ em28xx_unregister_extension(&v4l2_ops);
+}
+
+module_init(em28xx_dvb_register);
+module_exit(em28xx_dvb_unregister);
@@ -26,7 +26,7 @@
#ifndef _EM28XX_H
#define _EM28XX_H
-#define EM28XX_VERSION "0.2.0"
+#define EM28XX_VERSION "0.2.1"
#include <linux/workqueue.h>
#include <linux/i2c.h>
@@ -474,6 +474,7 @@ struct em28xx_eeprom {
#define EM28XX_AUDIO 0x10
#define EM28XX_DVB 0x20
#define EM28XX_RC 0x30
+#define EM28XX_V4L2 0x40
/* em28xx resource types (used for res_get/res_lock etc */
#define EM28XX_RESOURCE_VIDEO 0x01
@@ -527,6 +528,7 @@ struct em28xx {
unsigned int is_em25xx:1; /* em25xx/em276x/7x/8x family bridge */
unsigned char disconnected:1; /* device has been diconnected */
+ unsigned int has_video:1;
unsigned int has_audio_class:1;
unsigned int has_alsa_audio:1;
unsigned int is_audio_only:1;
@@ -723,14 +725,9 @@ int em28xx_write_ac97(struct em28xx *dev, u8 reg, u16 val);
int em28xx_audio_analog_set(struct em28xx *dev);
int em28xx_audio_setup(struct em28xx *dev);
-int em28xx_colorlevels_set_default(struct em28xx *dev);
const struct em28xx_led *em28xx_find_led(struct em28xx *dev,
enum em28xx_led_role role);
int em28xx_capture_start(struct em28xx *dev, int start);
-int em28xx_vbi_supported(struct em28xx *dev);
-int em28xx_set_outfmt(struct em28xx *dev);
-int em28xx_resolution_set(struct em28xx *dev);
-int em28xx_set_alternate(struct em28xx *dev);
int em28xx_alloc_urbs(struct em28xx *dev, enum em28xx_mode mode, int xfer_bulk,
int num_bufs, int max_pkt_size, int packet_multiplier);
int em28xx_init_usb_xfer(struct em28xx *dev, enum em28xx_mode mode,
@@ -742,31 +739,17 @@ void em28xx_uninit_usb_xfer(struct em28xx *dev, enum em28xx_mode mode);
void em28xx_stop_urbs(struct em28xx *dev);
int em28xx_set_mode(struct em28xx *dev, enum em28xx_mode set_mode);
int em28xx_gpio_set(struct em28xx *dev, struct em28xx_reg_seq *gpio);
-void em28xx_wake_i2c(struct em28xx *dev);
int em28xx_register_extension(struct em28xx_ops *dev);
void em28xx_unregister_extension(struct em28xx_ops *dev);
void em28xx_init_extension(struct em28xx *dev);
void em28xx_close_extension(struct em28xx *dev);
-/* Provided by em28xx-video.c */
-void em28xx_tuner_setup(struct em28xx *dev);
-int em28xx_vb2_setup(struct em28xx *dev);
-int em28xx_register_analog_devices(struct em28xx *dev);
-void em28xx_release_analog_resources(struct em28xx *dev);
-void em28xx_ctrl_notify(struct v4l2_ctrl *ctrl, void *priv);
-int em28xx_start_analog_streaming(struct vb2_queue *vq, unsigned int count);
-int em28xx_stop_vbi_streaming(struct vb2_queue *vq);
-extern const struct v4l2_ctrl_ops em28xx_ctrl_ops;
-
/* Provided by em28xx-cards.c */
extern struct em28xx_board em28xx_boards[];
extern struct usb_device_id em28xx_id_table[];
int em28xx_tuner_callback(void *ptr, int component, int command, int arg);
void em28xx_release_resources(struct em28xx *dev);
-/* Provided by em28xx-vbi.c */
-extern struct vb2_ops em28xx_vbi_qops;
-
/* Provided by em28xx-camera.c */
int em28xx_detect_sensor(struct em28xx *dev);
int em28xx_init_camera(struct em28xx *dev);