From patchwork Sat Jan 4 10:55:48 2014 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Mauro Carvalho Chehab X-Patchwork-Id: 3434021 Return-Path: X-Original-To: patchwork-linux-media@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork1.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.19.201]) by patchwork1.web.kernel.org (Postfix) with ESMTP id B5DE89F2E9 for ; Sat, 4 Jan 2014 17:26:21 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id 9E96220158 for ; Sat, 4 Jan 2014 17:26:20 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 840E020145 for ; Sat, 4 Jan 2014 17:26:19 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754823AbaADR0Q (ORCPT ); Sat, 4 Jan 2014 12:26:16 -0500 Received: from bombadil.infradead.org ([198.137.202.9]:44200 "EHLO bombadil.infradead.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754596AbaADR0O (ORCPT ); Sat, 4 Jan 2014 12:26:14 -0500 Received: from [177.143.150.208] (helo=smtp.w2.samsung.com) by bombadil.infradead.org with esmtpsa (Exim 4.80.1 #2 (Red Hat Linux)) id 1VzUzD-0008VZ-VY; Sat, 04 Jan 2014 17:26:12 +0000 Received: from mchehab by smtp.w2.samsung.com with local (Exim 4.80.1) (envelope-from ) id 1VzOtV-0003kt-O6; Sat, 04 Jan 2014 08:55:53 -0200 From: Mauro Carvalho Chehab Cc: Mauro Carvalho Chehab , Linux Media Mailing List , Mauro Carvalho Chehab Subject: [PATCH v4 19/22] [media] em28xx: cleanup I2C debug messages Date: Sat, 4 Jan 2014 08:55:48 -0200 Message-Id: <1388832951-11195-20-git-send-email-m.chehab@samsung.com> X-Mailer: git-send-email 1.8.3.1 In-Reply-To: <1388832951-11195-1-git-send-email-m.chehab@samsung.com> References: <1388832951-11195-1-git-send-email-m.chehab@samsung.com> To: unlisted-recipients:; (no To-header on input) Sender: linux-media-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org X-Spam-Status: No, score=-7.3 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_HI, RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=ham version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP The I2C output messages is too polluted. Clean it a little bit, by: - use the proper core support for memory dumps; - hide most stuff under the i2c_debug umbrella; - add the missing KERN_CONT where needed; - use 2 levels or verbosity. Only the second one will show the I2C transfer data. Signed-off-by: Mauro Carvalho Chehab Reviewed-by: Frank Schäfer --- drivers/media/usb/em28xx/em28xx-i2c.c | 94 +++++++++++++++++++---------------- 1 file changed, 50 insertions(+), 44 deletions(-) diff --git a/drivers/media/usb/em28xx/em28xx-i2c.c b/drivers/media/usb/em28xx/em28xx-i2c.c index c3ba8ace5c94..e030e0b7d645 100644 --- a/drivers/media/usb/em28xx/em28xx-i2c.c +++ b/drivers/media/usb/em28xx/em28xx-i2c.c @@ -41,7 +41,7 @@ MODULE_PARM_DESC(i2c_scan, "scan i2c bus at insmod time"); static unsigned int i2c_debug; module_param(i2c_debug, int, 0644); -MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]"); +MODULE_PARM_DESC(i2c_debug, "i2c debug message level (1: normal debug, 2: show I2C transfers)"); /* * em2800_i2c_send_bytes() @@ -80,7 +80,9 @@ static int em2800_i2c_send_bytes(struct em28xx *dev, u8 addr, u8 *buf, u16 len) if (ret == 0x80 + len - 1) return len; if (ret == 0x94 + len - 1) { - em28xx_warn("R05 returned 0x%02x: I2C timeout", ret); + if (i2c_debug) + em28xx_warn("R05 returned 0x%02x: I2C timeout", + ret); return -EREMOTEIO; } if (ret < 0) { @@ -90,7 +92,8 @@ static int em2800_i2c_send_bytes(struct em28xx *dev, u8 addr, u8 *buf, u16 len) } msleep(5); } - em28xx_warn("write to i2c device at 0x%x timed out\n", addr); + if (i2c_debug) + em28xx_warn("write to i2c device at 0x%x timed out\n", addr); return -EREMOTEIO; } @@ -124,7 +127,9 @@ static int em2800_i2c_recv_bytes(struct em28xx *dev, u8 addr, u8 *buf, u16 len) if (ret == 0x84 + len - 1) break; if (ret == 0x94 + len - 1) { - em28xx_warn("R05 returned 0x%02x: I2C timeout", ret); + if (i2c_debug) + em28xx_warn("R05 returned 0x%02x: I2C timeout", + ret); return -EREMOTEIO; } if (ret < 0) { @@ -134,8 +139,11 @@ static int em2800_i2c_recv_bytes(struct em28xx *dev, u8 addr, u8 *buf, u16 len) } msleep(5); } - if (ret != 0x84 + len - 1) - em28xx_warn("read from i2c device at 0x%x timed out\n", addr); + if (ret != 0x84 + len - 1) { + if (i2c_debug) + em28xx_warn("read from i2c device at 0x%x timed out\n", + addr); + } /* get the received message */ ret = dev->em28xx_read_reg_req_len(dev, 0x00, 4-len, buf2, len); @@ -218,7 +226,8 @@ static int em28xx_i2c_send_bytes(struct em28xx *dev, u16 addr, u8 *buf, */ } - em28xx_warn("write to i2c device at 0x%x timed out\n", addr); + if (i2c_debug) + em28xx_warn("write to i2c device at 0x%x timed out\n", addr); return -EREMOTEIO; } @@ -263,7 +272,9 @@ static int em28xx_i2c_recv_bytes(struct em28xx *dev, u16 addr, u8 *buf, u16 len) return ret; } if (ret == 0x10) { - em28xx_warn("I2C transfer timeout on read from addr 0x%02x", addr); + if (i2c_debug) + em28xx_warn("I2C transfer timeout on writing to addr 0x%02x", + addr); return -EREMOTEIO; } @@ -324,7 +335,9 @@ static int em25xx_bus_B_send_bytes(struct em28xx *dev, u16 addr, u8 *buf, if (!ret) return len; else if (ret > 0) { - em28xx_warn("Bus B R08 returned 0x%02x: I2C timeout", ret); + if (i2c_debug) + em28xx_warn("Bus B R08 returned 0x%02x: I2C timeout", + ret); return -EREMOTEIO; } @@ -375,7 +388,9 @@ static int em25xx_bus_B_recv_bytes(struct em28xx *dev, u16 addr, u8 *buf, if (!ret) return len; else if (ret > 0) { - em28xx_warn("Bus B R08 returned 0x%02x: I2C timeout", ret); + if (i2c_debug) + em28xx_warn("Bus B R08 returned 0x%02x: I2C timeout", + ret); return -EREMOTEIO; } @@ -418,10 +433,6 @@ static inline int i2c_check_for_device(struct em28xx_i2c_bus *i2c_bus, u16 addr) rc = em2800_i2c_check_for_device(dev, addr); else if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM25XX_BUS_B) rc = em25xx_bus_B_check_for_device(dev, addr); - if (rc < 0) { - if (i2c_debug) - printk(" no device\n"); - } return rc; } @@ -430,7 +441,7 @@ static inline int i2c_recv_bytes(struct em28xx_i2c_bus *i2c_bus, { struct em28xx *dev = i2c_bus->dev; u16 addr = msg.addr << 1; - int byte, rc = -EOPNOTSUPP; + int rc = -EOPNOTSUPP; if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM28XX) rc = em28xx_i2c_recv_bytes(dev, addr, msg.buf, msg.len); @@ -438,10 +449,6 @@ static inline int i2c_recv_bytes(struct em28xx_i2c_bus *i2c_bus, rc = em2800_i2c_recv_bytes(dev, addr, msg.buf, msg.len); else if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM25XX_BUS_B) rc = em25xx_bus_B_recv_bytes(dev, addr, msg.buf, msg.len); - if (i2c_debug) { - for (byte = 0; byte < msg.len; byte++) - printk(" %02x", msg.buf[byte]); - } return rc; } @@ -450,12 +457,8 @@ static inline int i2c_send_bytes(struct em28xx_i2c_bus *i2c_bus, { struct em28xx *dev = i2c_bus->dev; u16 addr = msg.addr << 1; - int byte, rc = -EOPNOTSUPP; + int rc = -EOPNOTSUPP; - if (i2c_debug) { - for (byte = 0; byte < msg.len; byte++) - printk(" %02x", msg.buf[byte]); - } if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM28XX) rc = em28xx_i2c_send_bytes(dev, addr, msg.buf, msg.len, stop); else if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM2800) @@ -500,7 +503,7 @@ static int em28xx_i2c_xfer(struct i2c_adapter *i2c_adap, } for (i = 0; i < num; i++) { addr = msgs[i].addr << 1; - if (i2c_debug) + if (i2c_debug > 1) printk(KERN_DEBUG "%s at %s: %s %s addr=%02x len=%d:", dev->name, __func__ , (msgs[i].flags & I2C_M_RD) ? "read" : "write", @@ -509,24 +512,33 @@ static int em28xx_i2c_xfer(struct i2c_adapter *i2c_adap, if (!msgs[i].len) { /* no len: check only for device presence */ rc = i2c_check_for_device(i2c_bus, addr); if (rc < 0) { + if (i2c_debug > 1) + printk(KERN_CONT " no device\n"); rt_mutex_unlock(&dev->i2c_bus_lock); return rc; } } else if (msgs[i].flags & I2C_M_RD) { /* read bytes */ rc = i2c_recv_bytes(i2c_bus, msgs[i]); + + if (i2c_debug > 1 && rc >= 0) + printk(KERN_CONT " %*ph", + msgs[i].len, msgs[i].buf); } else { + if (i2c_debug > 1) + printk(KERN_CONT " %*ph", + msgs[i].len, msgs[i].buf); + /* write bytes */ rc = i2c_send_bytes(i2c_bus, msgs[i], i == num - 1); } if (rc < 0) { - if (i2c_debug) - printk(" ERROR: %i\n", rc); + if (i2c_debug > 1) + printk(KERN_CONT " ERROR: %i\n", rc); rt_mutex_unlock(&dev->i2c_bus_lock); return rc; - } - if (i2c_debug) - printk("\n"); + } else if (i2c_debug > 1) + printk(KERN_CONT "\n"); } rt_mutex_unlock(&dev->i2c_bus_lock); @@ -609,7 +621,7 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned bus, * calculation and returned device dataset. Simplifies the code a lot, * but we might have to deal with multiple sizes in the future ! */ - int i, err; + int err; struct em28xx_eeprom *dev_config; u8 buf, *data; @@ -640,20 +652,14 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned bus, goto error; } - /* Display eeprom content */ - for (i = 0; i < len; i++) { - if (0 == (i % 16)) { - if (dev->eeprom_addrwidth_16bit) - em28xx_info("i2c eeprom %04x:", i); - else - em28xx_info("i2c eeprom %02x:", i); - } - printk(" %02x", data[i]); - if (15 == (i % 16)) - printk("\n"); + if (i2c_debug) { + /* Display eeprom content */ + print_hex_dump(KERN_INFO, "eeprom ", DUMP_PREFIX_OFFSET, + 16, 1, data, len, true); + + if (dev->eeprom_addrwidth_16bit) + em28xx_info("eeprom %06x: ... (skipped)\n", 256); } - if (dev->eeprom_addrwidth_16bit) - em28xx_info("i2c eeprom %04x: ... (skipped)\n", i); if (dev->eeprom_addrwidth_16bit && data[0] == 0x26 && data[3] == 0x00) {