@@ -24,3 +24,10 @@ config IR_IMG_HW
signals in hardware. This is more reliable, consumes less processing
power since only a single interrupt is received for each scancode,
and allows an IR scancode to be used as a wake event.
+
+config IR_IMG_NEC
+ bool "NEC protocol support"
+ depends on IR_IMG_HW
+ help
+ Say Y here to enable support for the NEC, extended NEC, and 32-bit
+ NEC protocols in the ImgTec infrared decoder block.
@@ -1,6 +1,7 @@
img-ir-y := img-ir-core.o
img-ir-$(CONFIG_IR_IMG_RAW) += img-ir-raw.o
img-ir-$(CONFIG_IR_IMG_HW) += img-ir-hw.o
+img-ir-$(CONFIG_IR_IMG_NEC) += img-ir-nec.o
img-ir-objs := $(img-ir-y)
obj-$(CONFIG_IR_IMG) += img-ir.o
@@ -20,8 +20,13 @@
/* Decoders lock (only modified to preprocess them) */
static DEFINE_SPINLOCK(img_ir_decoders_lock);
+extern struct img_ir_decoder img_ir_nec;
+
static bool img_ir_decoders_preprocessed;
static struct img_ir_decoder *img_ir_decoders[] = {
+#ifdef CONFIG_IR_IMG_NEC
+ &img_ir_nec,
+#endif
NULL
};
new file mode 100644
@@ -0,0 +1,148 @@
+/*
+ * ImgTec IR Decoder setup for NEC protocol.
+ *
+ * Copyright 2010-2014 Imagination Technologies Ltd.
+ */
+
+#include "img-ir-hw.h"
+
+/* Convert NEC data to a scancode */
+static int img_ir_nec_scancode(int len, u64 raw, int *scancode, u64 protocols)
+{
+ unsigned int addr, addr_inv, data, data_inv;
+ /* a repeat code has no data */
+ if (!len)
+ return IMG_IR_REPEATCODE;
+ if (len != 32)
+ return -EINVAL;
+ /* raw encoding: ddDDaaAA */
+ addr = (raw >> 0) & 0xff;
+ addr_inv = (raw >> 8) & 0xff;
+ data = (raw >> 16) & 0xff;
+ data_inv = (raw >> 24) & 0xff;
+ if ((data_inv ^ data) != 0xff) {
+ /* 32-bit NEC (used by Apple and TiVo remotes) */
+ /* scan encoding: aaAAddDD */
+ *scancode = addr_inv << 24 |
+ addr << 16 |
+ data_inv << 8 |
+ data;
+ } else if ((addr_inv ^ addr) != 0xff) {
+ /* Extended NEC */
+ /* scan encoding: AAaaDD */
+ *scancode = addr << 16 |
+ addr_inv << 8 |
+ data;
+ } else {
+ /* Normal NEC */
+ /* scan encoding: AADD */
+ *scancode = addr << 8 |
+ data;
+ }
+ return IMG_IR_SCANCODE;
+}
+
+/* Convert NEC scancode to NEC data filter */
+static int img_ir_nec_filter(const struct rc_scancode_filter *in,
+ struct img_ir_filter *out, u64 protocols)
+{
+ unsigned int addr, addr_inv, data, data_inv;
+ unsigned int addr_m, addr_inv_m, data_m, data_inv_m;
+
+ data = in->data & 0xff;
+ data_m = in->mask & 0xff;
+
+ if ((in->data | in->mask) & 0xff000000) {
+ /* 32-bit NEC (used by Apple and TiVo remotes) */
+ /* scan encoding: aaAAddDD */
+ addr_inv = (in->data >> 24) & 0xff;
+ addr_inv_m = (in->mask >> 24) & 0xff;
+ addr = (in->data >> 16) & 0xff;
+ addr_m = (in->mask >> 16) & 0xff;
+ data_inv = (in->data >> 8) & 0xff;
+ data_inv_m = (in->mask >> 8) & 0xff;
+ } else if ((in->data | in->mask) & 0x00ff0000) {
+ /* Extended NEC */
+ /* scan encoding AAaaDD */
+ addr = (in->data >> 16) & 0xff;
+ addr_m = (in->mask >> 16) & 0xff;
+ addr_inv = (in->data >> 8) & 0xff;
+ addr_inv_m = (in->mask >> 8) & 0xff;
+ data_inv = data ^ 0xff;
+ data_inv_m = data_m;
+ } else {
+ /* Normal NEC */
+ /* scan encoding: AADD */
+ addr = (in->data >> 8) & 0xff;
+ addr_m = (in->mask >> 8) & 0xff;
+ addr_inv = addr ^ 0xff;
+ addr_inv_m = addr_m;
+ data_inv = data ^ 0xff;
+ data_inv_m = data_m;
+ }
+
+ /* raw encoding: ddDDaaAA */
+ out->data = data_inv << 24 |
+ data << 16 |
+ addr_inv << 8 |
+ addr;
+ out->mask = data_inv_m << 24 |
+ data_m << 16 |
+ addr_inv_m << 8 |
+ addr_m;
+ return 0;
+}
+
+/*
+ * NEC decoder
+ * See also http://www.sbprojects.com/knowledge/ir/nec.php
+ * http://wiki.altium.com/display/ADOH/NEC+Infrared+Transmission+Protocol
+ */
+struct img_ir_decoder img_ir_nec = {
+ .type = RC_BIT_NEC,
+ .control = {
+ .decoden = 1,
+ .code_type = IMG_IR_CODETYPE_PULSEDIST,
+ },
+ /* main timings */
+ .unit = 562500, /* 562.5 us */
+ .timings = {
+ /* leader symbol */
+ .ldr = {
+ .pulse = { 16 /* 9ms */ },
+ .space = { 8 /* 4.5ms */ },
+ },
+ /* 0 symbol */
+ .s00 = {
+ .pulse = { 1 /* 562.5 us */ },
+ .space = { 1 /* 562.5 us */ },
+ },
+ /* 1 symbol */
+ .s01 = {
+ .pulse = { 1 /* 562.5 us */ },
+ .space = { 3 /* 1687.5 us */ },
+ },
+ /* free time */
+ .ft = {
+ .minlen = 32,
+ .maxlen = 32,
+ .ft_min = 10, /* 5.625 ms */
+ },
+ },
+ /* repeat codes */
+ .repeat = 108, /* 108 ms */
+ .rtimings = {
+ /* leader symbol */
+ .ldr = {
+ .space = { 4 /* 2.25 ms */ },
+ },
+ /* free time */
+ .ft = {
+ .minlen = 0, /* repeat code has no data */
+ .maxlen = 0,
+ },
+ },
+ /* scancode logic */
+ .scancode = img_ir_nec_scancode,
+ .filter = img_ir_nec_filter,
+};
Add an img-ir module for decoding the NEC and extended NEC infrared protocols. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: linux-media@vger.kernel.org --- v2: - Update scancode and filter callbacks to handle 32-bit NEC as used by Apple and TiVo remotes (the new 32-bit NEC scancode format is used, with the correct bit orientation). - Update to new scancode interface so that 32-bit NEC scancodes can be returned reliably. - Update to new filtering interface (generic struct rc_scancode_filter). - Make it possible to set the filter to extended NEC even when the high bits of the scancode value aren't set, by taking the mask into account too. My TV remote happens to use extended NEC with address 0x7f00, which unfortunately maps to scancodes 0x007f** which looks like normal NEC and couldn't previously be filtered. - Remove modularity and dynamic registration/unregistration, adding NEC directly to the list of decoders in img-ir-hw.c. --- drivers/media/rc/img-ir/Kconfig | 7 ++ drivers/media/rc/img-ir/Makefile | 1 + drivers/media/rc/img-ir/img-ir-hw.c | 5 ++ drivers/media/rc/img-ir/img-ir-nec.c | 148 +++++++++++++++++++++++++++++++++++ 4 files changed, 161 insertions(+) create mode 100644 drivers/media/rc/img-ir/img-ir-nec.c