@@ -75,13 +75,6 @@ struct xc5000_priv {
#define XC_RF_MODE_AIR 0
#define XC_RF_MODE_CABLE 1
-/* Result codes */
-#define XC_RESULT_SUCCESS 0
-#define XC_RESULT_RESET_FAILURE 1
-#define XC_RESULT_I2C_WRITE_FAILURE 2
-#define XC_RESULT_I2C_READ_FAILURE 3
-#define XC_RESULT_OUT_OF_RANGE 5
-
/* Product id */
#define XC_PRODUCT_ID_FW_NOT_LOADED 0x2000
#define XC_PRODUCT_ID_FW_LOADED 0x1388
@@ -258,9 +251,9 @@ static int xc_send_i2c_data(struct xc5000_priv *priv, u8 *buf, int len)
if (i2c_transfer(priv->i2c_props.adap, &msg, 1) != 1) {
printk(KERN_ERR "xc5000: I2C write failed (len=%i)\n", len);
- return XC_RESULT_I2C_WRITE_FAILURE;
+ return -EREMOTEIO;
}
- return XC_RESULT_SUCCESS;
+ return 0;
}
#if 0
@@ -297,7 +290,7 @@ static int xc5000_readreg(struct xc5000_priv *priv, u16 reg, u16 *val)
}
*val = (bval[0] << 8) | bval[1];
- return XC_RESULT_SUCCESS;
+ return 0;
}
static void xc_wait(int wait_ms)
@@ -320,13 +313,13 @@ static int xc5000_TunerReset(struct dvb_frontend *fe)
XC5000_TUNER_RESET, 0);
if (ret) {
printk(KERN_ERR "xc5000: reset failed\n");
- return XC_RESULT_RESET_FAILURE;
+ return ret;
}
} else {
printk(KERN_ERR "xc5000: no tuner reset callback function, fatal\n");
- return XC_RESULT_RESET_FAILURE;
+ return -EINVAL;
}
- return XC_RESULT_SUCCESS;
+ return 0;
}
static int xc_write_reg(struct xc5000_priv *priv, u16 regAddr, u16 i2cData)
@@ -340,11 +333,11 @@ static int xc_write_reg(struct xc5000_priv *priv, u16 regAddr, u16 i2cData)
buf[2] = (i2cData >> 8) & 0xFF;
buf[3] = i2cData & 0xFF;
result = xc_send_i2c_data(priv, buf, 4);
- if (result == XC_RESULT_SUCCESS) {
+ if (result == 0) {
/* wait for busy flag to clear */
- while ((WatchDogTimer > 0) && (result == XC_RESULT_SUCCESS)) {
+ while ((WatchDogTimer > 0) && (result == 0)) {
result = xc5000_readreg(priv, XREG_BUSY, (u16 *)buf);
- if (result == XC_RESULT_SUCCESS) {
+ if (result == 0) {
if ((buf[0] == 0) && (buf[1] == 0)) {
/* busy flag cleared */
break;
@@ -356,7 +349,7 @@ static int xc_write_reg(struct xc5000_priv *priv, u16 regAddr, u16 i2cData)
}
}
if (WatchDogTimer <= 0)
- result = XC_RESULT_I2C_WRITE_FAILURE;
+ result = -EREMOTEIO;
return result;
}
@@ -377,7 +370,7 @@ static int xc_load_i2c_sequence(struct dvb_frontend *fe, const u8 *i2c_sequence)
/* RESET command */
result = xc5000_TunerReset(fe);
index += 2;
- if (result != XC_RESULT_SUCCESS)
+ if (result != 0)
return result;
} else if (len & 0x8000) {
/* WAIT command */
@@ -404,7 +397,7 @@ static int xc_load_i2c_sequence(struct dvb_frontend *fe, const u8 *i2c_sequence)
result = xc_send_i2c_data(priv, buf,
nbytes_to_send);
- if (result != XC_RESULT_SUCCESS)
+ if (result != 0)
return result;
pos += nbytes_to_send - 2;
@@ -412,7 +405,7 @@ static int xc_load_i2c_sequence(struct dvb_frontend *fe, const u8 *i2c_sequence)
index += len;
}
}
- return XC_RESULT_SUCCESS;
+ return 0;
}
static int xc_initialize(struct xc5000_priv *priv)
@@ -437,7 +430,7 @@ static int xc_SetTVStandard(struct xc5000_priv *priv,
}
ret = xc_write_reg(priv, XREG_VIDEO_MODE, VideoMode);
- if (ret == XC_RESULT_SUCCESS)
+ if (ret == 0)
ret = xc_write_reg(priv, XREG_AUDIO_MODE, AudioMode);
return ret;
@@ -467,7 +460,7 @@ static int xc_set_RF_frequency(struct xc5000_priv *priv, u32 freq_hz)
if ((freq_hz > xc5000_tuner_ops.info.frequency_max) ||
(freq_hz < xc5000_tuner_ops.info.frequency_min))
- return XC_RESULT_OUT_OF_RANGE;
+ return -EINVAL;
freq_code = (u16)(freq_hz / 15625);
@@ -500,7 +493,7 @@ static int xc_get_frequency_error(struct xc5000_priv *priv, u32 *freq_error_hz)
u32 tmp;
result = xc5000_readreg(priv, XREG_FREQ_ERROR, ®Data);
- if (result != XC_RESULT_SUCCESS)
+ if (result != 0)
return result;
tmp = (u32)regData;
@@ -521,7 +514,7 @@ static int xc_get_version(struct xc5000_priv *priv,
int result;
result = xc5000_readreg(priv, XREG_VERSION, &data);
- if (result != XC_RESULT_SUCCESS)
+ if (result != 0)
return result;
(*hw_majorversion) = (data >> 12) & 0x0F;
@@ -543,7 +536,7 @@ static int xc_get_hsync_freq(struct xc5000_priv *priv, u32 *hsync_freq_hz)
int result;
result = xc5000_readreg(priv, XREG_HSYNC_FREQ, ®Data);
- if (result != XC_RESULT_SUCCESS)
+ if (result != 0)
return result;
(*hsync_freq_hz) = ((regData & 0x0fff) * 763)/100;
@@ -593,7 +586,7 @@ static int xc_tune_channel(struct xc5000_priv *priv, u32 freq_hz, int mode)
dprintk(1, "%s(%u)\n", __func__, freq_hz);
- if (xc_set_RF_frequency(priv, freq_hz) != XC_RESULT_SUCCESS)
+ if (xc_set_RF_frequency(priv, freq_hz) != 0)
return 0;
if (mode == XC_TUNE_ANALOG) {
@@ -607,7 +600,7 @@ static int xc_tune_channel(struct xc5000_priv *priv, u32 freq_hz, int mode)
static int xc_set_xtal(struct dvb_frontend *fe)
{
struct xc5000_priv *priv = fe->tuner_priv;
- int ret = XC_RESULT_SUCCESS;
+ int ret = 0;
switch (priv->chip_id) {
default:
@@ -649,23 +642,22 @@ static int xc5000_fwupload(struct dvb_frontend *fe)
priv->i2c_props.adap->dev.parent);
if (ret) {
printk(KERN_ERR "xc5000: Upload failed. (file not found?)\n");
- ret = XC_RESULT_RESET_FAILURE;
goto out;
} else {
printk(KERN_DEBUG "xc5000: firmware read %Zu bytes.\n",
fw->size);
- ret = XC_RESULT_SUCCESS;
+ ret = 0;
}
if (fw->size != desired_fw->size) {
printk(KERN_ERR "xc5000: firmware incorrect size\n");
- ret = XC_RESULT_RESET_FAILURE;
+ ret = -EINVAL;
} else {
printk(KERN_INFO "xc5000: firmware uploading...\n");
ret = xc_load_i2c_sequence(fe, fw->data);
- if (XC_RESULT_SUCCESS == ret)
+ if (0 == ret)
ret = xc_set_xtal(fe);
- if (XC_RESULT_SUCCESS == ret)
+ if (0 == ret)
printk(KERN_INFO "xc5000: firmware upload complete...\n");
else
printk(KERN_ERR "xc5000: firmware upload failed...\n");
@@ -744,7 +736,7 @@ static int xc5000_set_params(struct dvb_frontend *fe)
u32 freq = fe->dtv_property_cache.frequency;
u32 delsys = fe->dtv_property_cache.delivery_system;
- if (xc_load_fw_and_init_tuner(fe, 0) != XC_RESULT_SUCCESS) {
+ if (xc_load_fw_and_init_tuner(fe, 0) != 0) {
dprintk(1, "Unable to load firmware and init tuner\n");
return -EINVAL;
}
@@ -821,7 +813,7 @@ static int xc5000_set_params(struct dvb_frontend *fe)
__func__, freq, priv->freq_hz);
ret = xc_SetSignalSource(priv, priv->rf_mode);
- if (ret != XC_RESULT_SUCCESS) {
+ if (ret != 0) {
printk(KERN_ERR
"xc5000: xc_SetSignalSource(%d) failed\n",
priv->rf_mode);
@@ -831,13 +823,13 @@ static int xc5000_set_params(struct dvb_frontend *fe)
ret = xc_SetTVStandard(priv,
XC5000_Standard[priv->video_standard].VideoMode,
XC5000_Standard[priv->video_standard].AudioMode, 0);
- if (ret != XC_RESULT_SUCCESS) {
+ if (ret != 0) {
printk(KERN_ERR "xc5000: xc_SetTVStandard failed\n");
return -EREMOTEIO;
}
ret = xc_set_IF_frequency(priv, priv->if_khz);
- if (ret != XC_RESULT_SUCCESS) {
+ if (ret != 0) {
printk(KERN_ERR "xc5000: xc_Set_IF_frequency(%d) failed\n",
priv->if_khz);
return -EIO;
@@ -862,15 +854,15 @@ static int xc5000_is_firmware_loaded(struct dvb_frontend *fe)
u16 id;
ret = xc5000_readreg(priv, XREG_PRODUCT_ID, &id);
- if (ret == XC_RESULT_SUCCESS) {
+ if (ret == 0) {
if (id == XC_PRODUCT_ID_FW_NOT_LOADED)
- ret = XC_RESULT_RESET_FAILURE;
+ ret = -ENOENT;
else
- ret = XC_RESULT_SUCCESS;
+ ret = 0;
}
dprintk(1, "%s() returns %s id = 0x%x\n", __func__,
- ret == XC_RESULT_SUCCESS ? "True" : "False", id);
+ ret == 0 ? "True" : "False", id);
return ret;
}
@@ -937,7 +929,7 @@ static int xc5000_set_tv_freq(struct dvb_frontend *fe,
tune_channel:
ret = xc_SetSignalSource(priv, priv->rf_mode);
- if (ret != XC_RESULT_SUCCESS) {
+ if (ret != 0) {
printk(KERN_ERR
"xc5000: xc_SetSignalSource(%d) failed\n",
priv->rf_mode);
@@ -947,7 +939,7 @@ tune_channel:
ret = xc_SetTVStandard(priv,
XC5000_Standard[priv->video_standard].VideoMode,
XC5000_Standard[priv->video_standard].AudioMode, 0);
- if (ret != XC_RESULT_SUCCESS) {
+ if (ret != 0) {
printk(KERN_ERR "xc5000: xc_SetTVStandard failed\n");
return -EREMOTEIO;
}
@@ -966,7 +958,7 @@ tune_channel:
/* PLL is unlocked, force reload of the firmware */
dprintk(1, "xc5000: PLL not locked (0x%x). Reloading...\n",
pll_lock_status);
- if (xc_load_fw_and_init_tuner(fe, 1) != XC_RESULT_SUCCESS) {
+ if (xc_load_fw_and_init_tuner(fe, 1) != 0) {
printk(KERN_ERR "xc5000: Unable to reload fw\n");
return -EREMOTEIO;
}
@@ -1011,13 +1003,13 @@ static int xc5000_set_radio_freq(struct dvb_frontend *fe,
ret = xc_SetTVStandard(priv, XC5000_Standard[radio_input].VideoMode,
XC5000_Standard[radio_input].AudioMode, radio_input);
- if (ret != XC_RESULT_SUCCESS) {
+ if (ret != 0) {
printk(KERN_ERR "xc5000: xc_SetTVStandard failed\n");
return -EREMOTEIO;
}
ret = xc_SetSignalSource(priv, priv->rf_mode);
- if (ret != XC_RESULT_SUCCESS) {
+ if (ret != 0) {
printk(KERN_ERR
"xc5000: xc_SetSignalSource(%d) failed\n",
priv->rf_mode);
@@ -1044,7 +1036,7 @@ static int xc5000_set_analog_params(struct dvb_frontend *fe,
if (priv->i2c_props.adap == NULL)
return -EINVAL;
- if (xc_load_fw_and_init_tuner(fe, 0) != XC_RESULT_SUCCESS) {
+ if (xc_load_fw_and_init_tuner(fe, 0) != 0) {
dprintk(1, "Unable to load firmware and init tuner\n");
return -EINVAL;
}
@@ -1105,23 +1097,23 @@ static int xc5000_get_status(struct dvb_frontend *fe, u32 *status)
static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe, int force)
{
struct xc5000_priv *priv = fe->tuner_priv;
- int ret = XC_RESULT_SUCCESS;
+ int ret = 0;
u16 pll_lock_status;
u16 fw_ck;
- if (force || xc5000_is_firmware_loaded(fe) != XC_RESULT_SUCCESS) {
+ if (force || xc5000_is_firmware_loaded(fe) != 0) {
fw_retry:
ret = xc5000_fwupload(fe);
- if (ret != XC_RESULT_SUCCESS)
+ if (ret != 0)
return ret;
msleep(20);
if (priv->fw_checksum_supported) {
if (xc5000_readreg(priv, XREG_FW_CHECKSUM, &fw_ck)
- != XC_RESULT_SUCCESS) {
+ != 0) {
dprintk(1, "%s() FW checksum reading failed.\n",
__func__);
goto fw_retry;
@@ -1137,7 +1129,7 @@ fw_retry:
/* Start the tuner self-calibration process */
ret |= xc_initialize(priv);
- if (ret != XC_RESULT_SUCCESS)
+ if (ret != 0)
goto fw_retry;
/* Wait for calibration to complete.
@@ -1148,7 +1140,7 @@ fw_retry:
xc_wait(100);
if (priv->init_status_supported) {
- if (xc5000_readreg(priv, XREG_INIT_STATUS, &fw_ck) != XC_RESULT_SUCCESS) {
+ if (xc5000_readreg(priv, XREG_INIT_STATUS, &fw_ck) != 0) {
dprintk(1, "%s() FW failed reading init status.\n",
__func__);
goto fw_retry;
@@ -1191,13 +1183,13 @@ static int xc5000_sleep(struct dvb_frontend *fe)
was removed in newer versions of the firmware. The "supported"
way to sleep the tuner is to pull the reset pin low for 10ms */
ret = xc5000_TunerReset(fe);
- if (ret != XC_RESULT_SUCCESS) {
+ if (ret != 0) {
printk(KERN_ERR
"xc5000: %s() unable to shutdown tuner\n",
__func__);
return -EREMOTEIO;
} else
- return XC_RESULT_SUCCESS;
+ return 0;
}
static int xc5000_init(struct dvb_frontend *fe)
@@ -1205,7 +1197,7 @@ static int xc5000_init(struct dvb_frontend *fe)
struct xc5000_priv *priv = fe->tuner_priv;
dprintk(1, "%s()\n", __func__);
- if (xc_load_fw_and_init_tuner(fe, 0) != XC_RESULT_SUCCESS) {
+ if (xc_load_fw_and_init_tuner(fe, 0) != 0) {
printk(KERN_ERR "xc5000: Unable to initialise tuner\n");
return -EREMOTEIO;
}
@@ -1327,7 +1319,7 @@ struct dvb_frontend *xc5000_attach(struct dvb_frontend *fe,
/* Check if firmware has been loaded. It is possible that another
instance of the driver has loaded the firmware.
*/
- if (xc5000_readreg(priv, XREG_PRODUCT_ID, &id) != XC_RESULT_SUCCESS)
+ if (xc5000_readreg(priv, XREG_PRODUCT_ID, &id) != 0)
goto fail;
switch (id) {
Errors should also be negative and should follow the Kernel standards. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> --- drivers/media/tuners/xc5000.c | 104 +++++++++++++++++++----------------------- 1 file changed, 48 insertions(+), 56 deletions(-)