@@ -742,6 +742,7 @@ static int smiapp_get_limits_binning(struct smiapp_sensor *sensor)
static int smiapp_get_mbus_formats(struct smiapp_sensor *sensor)
{
struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+ struct smiapp_pll *pll = &sensor->pll;
unsigned int type, n;
unsigned int i, pixel_order;
int rval;
@@ -816,6 +817,45 @@ static int smiapp_get_mbus_formats(struct smiapp_sensor *sensor)
}
}
+ /* Figure out which BPP values can be used with which formats. */
+ pll->binning_horizontal = 1;
+ pll->binning_vertical = 1;
+ pll->scale_m = sensor->scale_m;
+
+ for (i = 0; i < ARRAY_SIZE(smiapp_csi_data_formats); i++) {
+ const struct smiapp_csi_data_format *f =
+ &smiapp_csi_data_formats[i];
+ unsigned int j;
+
+ BUG_ON(f->compressed < SMIAPP_COMPRESSED_BASE);
+ BUG_ON(f->compressed > SMIAPP_COMPRESSED_MAX);
+
+ if (!(sensor->default_mbus_frame_fmts & (1 << i)))
+ continue;
+
+ /* Did we already gather information for this BPP? */
+ if (sensor->valid_link_freqs[f->compressed
+ - SMIAPP_COMPRESSED_BASE])
+ continue;
+
+ pll->bits_per_pixel = f->compressed;
+
+ for (j = 0; j < sensor->platform_data->op_sys_clock[j]; j++) {
+ pll->link_freq = sensor->platform_data->op_sys_clock[j];
+
+ rval = smiapp_pll_try(sensor, pll);
+ dev_info(&client->dev, "link freq %u Hz, bpp %u %s\n",
+ pll->link_freq, pll->bits_per_pixel,
+ rval ? "not ok" : "ok");
+ if (rval)
+ continue;
+
+ set_bit(j, &sensor->valid_link_freqs[
+ f->compressed
+ - SMIAPP_COMPRESSED_BASE]);
+ }
+ }
+
if (!sensor->csi_format) {
dev_err(&client->dev, "no supported mbus code found\n");
return -EINVAL;
@@ -2479,12 +2519,6 @@ static int smiapp_registered(struct v4l2_subdev *subdev)
goto out_power_off;
}
- rval = smiapp_get_mbus_formats(sensor);
- if (rval) {
- rval = -ENODEV;
- goto out_power_off;
- }
-
if (sensor->limits[SMIAPP_LIMIT_BINNING_CAPABILITY]) {
u32 val;
@@ -2566,6 +2600,22 @@ static int smiapp_registered(struct v4l2_subdev *subdev)
sensor->scale_m = sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN];
+ /* prepare PLL configuration input values */
+ pll->bus_type = SMIAPP_PLL_BUS_TYPE_CSI2;
+ pll->csi2.lanes = sensor->platform_data->lanes;
+ pll->ext_clk_freq_hz = sensor->platform_data->ext_clk;
+ pll->flags = smiapp_call_quirk(sensor, pll_flags);
+ pll->scale_n = sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN];
+ /* Profile 0 sensors have no separate OP clock branch. */
+ if (sensor->minfo.smiapp_profile == SMIAPP_PROFILE_0)
+ pll->flags |= SMIAPP_PLL_FLAG_NO_OP_CLOCKS;
+
+ rval = smiapp_get_mbus_formats(sensor);
+ if (rval) {
+ rval = -ENODEV;
+ goto out_cleanup;
+ }
+
for (i = 0; i < SMIAPP_SUBDEVS; i++) {
struct {
struct smiapp_subdev *ssd;
@@ -2663,17 +2713,6 @@ static int smiapp_registered(struct v4l2_subdev *subdev)
if (rval < 0)
goto out_nvm_release;
- /* prepare PLL configuration input values */
- pll->bus_type = SMIAPP_PLL_BUS_TYPE_CSI2;
- pll->csi2.lanes = sensor->platform_data->lanes;
- pll->ext_clk_freq_hz = sensor->platform_data->ext_clk;
- pll->flags = smiapp_call_quirk(sensor, pll_flags);
-
- /* Profile 0 sensors have no separate OP clock branch. */
- if (sensor->minfo.smiapp_profile == SMIAPP_PROFILE_0)
- pll->flags |= SMIAPP_PLL_FLAG_NO_OP_CLOCKS;
- pll->scale_n = sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN];
-
mutex_lock(&sensor->mutex);
rval = smiapp_update_mode(sensor);
mutex_unlock(&sensor->mutex);
@@ -156,6 +156,11 @@ struct smiapp_csi_data_format {
#define SMIAPP_PAD_SRC 1
#define SMIAPP_PADS 2
+#define SMIAPP_COMPRESSED_BASE 8
+#define SMIAPP_COMPRESSED_MAX 12
+#define SMIAPP_NR_OF_COMPRESSED (SMIAPP_COMPRESSED_MAX - \
+ SMIAPP_COMPRESSED_BASE + 1)
+
struct smiapp_binning_subtype {
u8 horizontal:4;
u8 vertical:4;
@@ -232,6 +237,9 @@ struct smiapp_sensor {
struct smiapp_pll pll;
+ /* Is a default format supported for a given BPP? */
+ unsigned long valid_link_freqs[SMIAPP_NR_OF_COMPRESSED];
+
/* Pixel array controls */
struct v4l2_ctrl *analog_gain;
struct v4l2_ctrl *exposure;
Not all link rates are possible with all BPP values. Also rearrange other initialisation a little. Obtaining possible PLL configurations earlier requires that. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> --- drivers/media/i2c/smiapp/smiapp-core.c | 73 ++++++++++++++++++++++++-------- drivers/media/i2c/smiapp/smiapp.h | 8 ++++ 2 files changed, 64 insertions(+), 17 deletions(-)