@@ -39,6 +39,13 @@ config LEDS_88PM860X
This option enables support for on-chip LED drivers found on Marvell
Semiconductor 88PM8606 PMIC.
+config LEDS_AAT1290
+ tristate "LED support for the AAT1290"
+ depends on LEDS_CLASS_FLASH
+ depends on OF
+ help
+ This option enables support for the LEDs on the AAT1290.
+
config LEDS_LM3530
tristate "LCD Backlight driver for LM3530"
depends on LEDS_CLASS
@@ -7,6 +7,7 @@ obj-$(CONFIG_LEDS_TRIGGERS) += led-triggers.o
# LED Platform Drivers
obj-$(CONFIG_LEDS_88PM860X) += leds-88pm860x.o
+obj-$(CONFIG_LEDS_AAT1290) += leds-aat1290.o
obj-$(CONFIG_LEDS_BD2802) += leds-bd2802.o
obj-$(CONFIG_LEDS_LOCOMO) += leds-locomo.o
obj-$(CONFIG_LEDS_LM3530) += leds-lm3530.o
new file mode 100644
@@ -0,0 +1,398 @@
+/*
+ * LED Flash class driver for the AAT1290
+ * 1.5A Step-Up Current Regulator for Flash LEDs
+ *
+ * Copyright (C) 2015, Samsung Electronics Co., Ltd.
+ * Author: Jacek Anaszewski <j.anaszewski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/led-class-flash.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+
+#define AAT1290_MOVIE_MODE_CURRENT_ADDR 17
+#define AAT1290_MAX_MM_CURR_PERCENT_0 16
+#define AAT1290_MAX_MM_CURR_PERCENT_100 1
+
+#define AAT1290_FLASH_SAFETY_TIMER_ADDR 18
+
+#define AAT1290_MOVIE_MODE_CONFIG_ADDR 19
+#define AAT1290_MOVIE_MODE_OFF 1
+#define AAT1290_MOVIE_MODE_ON 3
+
+#define AAT1290_MM_CURRENT_RATIO_ADDR 20
+#define AAT1290_MM_TO_FL_1_92 1
+#define AAT1290_MM_TO_FL_3_7 2
+#define AAT1290_MM_TO_FL_5_5 3
+#define AAT1290_MM_TO_FL_7_3 4
+#define AAT1290_MM_TO_FL_9 5
+#define AAT1290_MM_TO_FL_10_7 6
+#define AAT1290_MM_TO_FL_12_4 7
+#define AAT1290_MM_TO_FL_14 8
+#define AAT1290_MM_TO_FL_15_9 9
+#define AAT1290_MM_TO_FL_17_5 10
+#define AAT1290_MM_TO_FL_19_1 11
+#define AAT1290_MM_TO_FL_20_8 12
+#define AAT1290_MM_TO_FL_22_4 13
+#define AAT1290_MM_TO_FL_24 14
+#define AAT1290_MM_TO_FL_25_6 15
+#define AAT1290_MM_TO_FL_OFF 16
+
+#define AAT1290_LATCH_TIME_MIN_US 500
+#define AAT1290_LATCH_TIME_MAX_US 1000
+#define AAT1290_EN_SET_TICK_TIME_US 1
+#define AAT1290_FLEN_OFF_DELAY_TIME_US 10
+#define AAT1290_FLASH_TM_NUM_LEVELS 16
+
+struct aat1290_led_settings {
+ struct led_flash_setting torch_brightness;
+ struct led_flash_setting flash_brightness;
+ struct led_flash_setting flash_timeout;
+};
+
+struct aat1290_led {
+ struct platform_device *pdev;
+ struct mutex lock;
+
+ struct led_classdev_flash fled_cdev;
+
+ int flen_gpio;
+ int en_set_gpio;
+
+ u32 max_flash_tm;
+ bool movie_mode;
+
+ char *label;
+ unsigned int torch_brightness;
+ unsigned int flash_timeout;
+ struct work_struct work_brightness_set;
+};
+
+static struct aat1290_led *fled_cdev_to_led(
+ struct led_classdev_flash *fled_cdev)
+{
+ return container_of(fled_cdev, struct aat1290_led, fled_cdev);
+}
+
+static void aat1290_as2cwire_write(struct aat1290_led *led, int addr, int value)
+{
+ int i;
+
+ gpio_set_value(led->flen_gpio, 0);
+ gpio_set_value(led->en_set_gpio, 0);
+
+ udelay(AAT1290_FLEN_OFF_DELAY_TIME_US);
+
+ /* write address */
+ for (i = 0; i < addr; ++i) {
+ udelay(AAT1290_EN_SET_TICK_TIME_US);
+ gpio_set_value(led->en_set_gpio, 0);
+ udelay(AAT1290_EN_SET_TICK_TIME_US);
+ gpio_set_value(led->en_set_gpio, 1);
+ }
+
+ usleep_range(AAT1290_LATCH_TIME_MIN_US, AAT1290_LATCH_TIME_MAX_US);
+
+ /* write data */
+ for (i = 0; i < value; ++i) {
+ udelay(AAT1290_EN_SET_TICK_TIME_US);
+ gpio_set_value(led->en_set_gpio, 0);
+ udelay(AAT1290_EN_SET_TICK_TIME_US);
+ gpio_set_value(led->en_set_gpio, 1);
+ }
+
+ usleep_range(AAT1290_LATCH_TIME_MIN_US, AAT1290_LATCH_TIME_MAX_US);
+}
+
+static void aat1290_set_flash_safety_timer(struct aat1290_led *led,
+ unsigned int micro_sec)
+{
+ struct led_classdev_flash *fled_cdev = &led->fled_cdev;
+ struct led_flash_setting *flash_tm = &fled_cdev->timeout;
+ int flash_tm_reg = AAT1290_FLASH_TM_NUM_LEVELS -
+ (micro_sec / flash_tm->step) + 1;
+
+ aat1290_as2cwire_write(led, AAT1290_FLASH_SAFETY_TIMER_ADDR,
+ flash_tm_reg);
+}
+
+static void aat1290_brightness_set(struct aat1290_led *led,
+ enum led_brightness brightness)
+{
+ mutex_lock(&led->lock);
+
+ if (brightness == 0) {
+ gpio_set_value(led->flen_gpio, 0);
+ gpio_set_value(led->en_set_gpio, 0);
+ goto unlock;
+ }
+
+ if (!led->movie_mode) {
+ aat1290_as2cwire_write(led, AAT1290_MM_CURRENT_RATIO_ADDR,
+ AAT1290_MM_TO_FL_1_92);
+ led->movie_mode = true;
+ }
+
+ aat1290_as2cwire_write(led, AAT1290_MOVIE_MODE_CURRENT_ADDR,
+ AAT1290_MAX_MM_CURR_PERCENT_0 - brightness);
+ aat1290_as2cwire_write(led, AAT1290_MOVIE_MODE_CONFIG_ADDR,
+ AAT1290_MOVIE_MODE_ON);
+unlock:
+ mutex_unlock(&led->lock);
+}
+
+/* LED subsystem callbacks */
+
+static void aat1290_brightness_set_work(struct work_struct *work)
+{
+ struct aat1290_led *led =
+ container_of(work, struct aat1290_led, work_brightness_set);
+
+ aat1290_brightness_set(led, led->torch_brightness);
+}
+
+static void aat1290_led_brightness_set(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
+{
+ struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev);
+ struct aat1290_led *led = fled_cdev_to_led(fled_cdev);
+
+ led->torch_brightness = brightness;
+ schedule_work(&led->work_brightness_set);
+}
+
+static int aat1290_led_brightness_set_sync(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
+{
+ struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev);
+ struct aat1290_led *led = fled_cdev_to_led(fled_cdev);
+
+ aat1290_brightness_set(led, brightness);
+
+ return 0;
+}
+
+static int aat1290_led_flash_strobe_set(struct led_classdev_flash *fled_cdev,
+ bool state)
+
+{
+ struct aat1290_led *led = fled_cdev_to_led(fled_cdev);
+ struct led_classdev *led_cdev = &fled_cdev->led_cdev;
+ struct led_flash_setting *timeout = &fled_cdev->timeout;
+
+ mutex_lock(&led->lock);
+
+ if (state == 0) {
+ gpio_set_value(led->flen_gpio, 0);
+ gpio_set_value(led->en_set_gpio, 0);
+ goto unlock;
+ }
+
+ aat1290_set_flash_safety_timer(led, timeout->val);
+
+ /*
+ * To reenter movie mode after a flash event the part
+ * must be cycled off and back on to reset the movie
+ * mode and reprogrammed via the AS2Cwire. Therefore
+ * the brightness value needs to be updated here to
+ * reflect the actual state.
+ */
+ led_cdev->brightness = 0;
+ led->movie_mode = false;
+
+ gpio_set_value(led->flen_gpio, 1);
+
+unlock:
+ mutex_unlock(&led->lock);
+
+ return 0;
+}
+
+static int aat1290_led_flash_timeout_set(struct led_classdev_flash *fled_cdev,
+ u32 timeout)
+{
+ /*
+ * Don't do anything - flash timeout is cached in the led-class-flash
+ * core and will be applied in the strobe_set op, as writing the
+ * safety timer register spuriously turns the torch mode on.
+ */
+
+ return 0;
+}
+
+static int aat1290_led_parse_dt(struct aat1290_led *led,
+ struct device *dev)
+{
+ int ret;
+
+ ret = of_property_read_string(dev->of_node, "label",
+ (const char **) &led->label);
+ if (ret < 0) {
+ dev_err(dev, "Error reading \"label\" DT property (%d)\n", ret);
+ return ret;
+ }
+
+ ret = of_property_read_u32(dev->of_node, "flash-timeout-us",
+ &led->max_flash_tm);
+ if (ret < 0)
+ dev_err(dev, "Error reading \"flash-timeout-us\" DT property (%d)\n",
+ ret);
+
+ return ret;
+}
+
+static void aat1290_init_flash_settings(struct aat1290_led *led,
+ struct aat1290_led_settings *s)
+{
+ struct led_flash_setting *setting;
+
+ /* Init flash intensity setting */
+ setting = &s->torch_brightness;
+ /*
+ * Torch current is adjustable in logarithmic fashion and thus
+ * it is not possible to define fixed step in microamperes.
+ * Instead led brightness levels are used to make possible
+ * setting all the supported levels from V4L2 Flash sub-device.
+ */
+ setting->min = 1;
+ setting->max = AAT1290_MAX_MM_CURR_PERCENT_0 -
+ AAT1290_MAX_MM_CURR_PERCENT_100;
+ setting->step = 1;
+ setting->val = setting->max;
+
+ /* Init flash timeout setting */
+ setting = &s->flash_timeout;
+ setting->min = led->max_flash_tm / AAT1290_FLASH_TM_NUM_LEVELS;
+ setting->max = setting->min * AAT1290_FLASH_TM_NUM_LEVELS;
+ setting->step = setting->min;
+ setting->val = setting->max;
+}
+
+static const struct led_flash_ops flash_ops = {
+ .strobe_set = aat1290_led_flash_strobe_set,
+ .timeout_set = aat1290_led_flash_timeout_set,
+};
+
+static int aat1290_led_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *dev_node = pdev->dev.of_node;
+ struct aat1290_led *led;
+ struct led_classdev *led_cdev;
+ struct led_classdev_flash *fled_cdev;
+ struct aat1290_led_settings settings;
+ int flen_gpio, enset_gpio, ret;
+
+ led = devm_kzalloc(dev, sizeof(*led), GFP_KERNEL);
+ if (!led)
+ return -ENOMEM;
+
+ led->pdev = pdev;
+ platform_set_drvdata(pdev, led);
+
+ if (!dev_node)
+ return -ENXIO;
+
+ flen_gpio = of_get_gpio(dev_node, 0);
+ if (gpio_is_valid(flen_gpio)) {
+ ret = devm_gpio_request_one(dev, flen_gpio, GPIOF_DIR_OUT,
+ "aat1290_flen");
+ if (ret < 0) {
+ dev_err(dev,
+ "failed to request GPIO %d, error %d\n",
+ flen_gpio, ret);
+ return ret;
+ }
+ }
+ led->flen_gpio = flen_gpio;
+
+ enset_gpio = of_get_gpio(dev_node, 1);
+ if (gpio_is_valid(enset_gpio)) {
+ ret = devm_gpio_request_one(dev, enset_gpio, GPIOF_DIR_OUT,
+ "aat1290_en_set");
+ if (ret < 0) {
+ dev_err(dev,
+ "failed to request GPIO %d, error %d\n",
+ enset_gpio, ret);
+ return ret;
+ }
+ }
+ led->en_set_gpio = enset_gpio;
+
+ ret = aat1290_led_parse_dt(led, &pdev->dev);
+ if (ret < 0)
+ return ret;
+
+ fled_cdev = &led->fled_cdev;
+
+ /* Init flash settings */
+ aat1290_init_flash_settings(led, &settings);
+
+ fled_cdev->timeout = settings.flash_timeout;
+
+ /* Init led class */
+ led_cdev = &fled_cdev->led_cdev;
+ led_cdev->name = led->label;
+ led_cdev->brightness_set = aat1290_led_brightness_set;
+ led_cdev->brightness_set_sync = aat1290_led_brightness_set_sync;
+ led_cdev->max_brightness = settings.torch_brightness.max;
+ led_cdev->flags |= LED_DEV_CAP_FLASH;
+
+ INIT_WORK(&led->work_brightness_set, aat1290_brightness_set_work);
+
+ fled_cdev->ops = &flash_ops;
+
+ /* Register in the LED subsystem. */
+ ret = led_classdev_flash_register(&pdev->dev, fled_cdev);
+ if (ret < 0)
+ return ret;
+
+ mutex_init(&led->lock);
+
+ return 0;
+}
+
+static int aat1290_led_remove(struct platform_device *pdev)
+{
+ struct aat1290_led *led = platform_get_drvdata(pdev);
+
+ led_classdev_flash_unregister(&led->fled_cdev);
+ cancel_work_sync(&led->work_brightness_set);
+
+ mutex_destroy(&led->lock);
+
+ return 0;
+}
+
+static struct of_device_id aat1290_led_dt_match[] = {
+ {.compatible = "skyworks,aat1290"},
+ {},
+};
+
+static struct platform_driver aat1290_led_driver = {
+ .probe = aat1290_led_probe,
+ .remove = aat1290_led_remove,
+ .driver = {
+ .name = "aat1290-led",
+ .owner = THIS_MODULE,
+ .of_match_table = aat1290_led_dt_match,
+ },
+};
+
+module_platform_driver(aat1290_led_driver);
+
+MODULE_AUTHOR("Jacek Anaszewski <j.anaszewski@samsung.com>");
+MODULE_DESCRIPTION("Skyworks Current Regulator for Flash LEDs");
+MODULE_LICENSE("GPL v2");