@@ -363,215 +363,6 @@ static irqreturn_t iss_isr(int irq, void *_iss)
}
/* -----------------------------------------------------------------------------
- * Pipeline power management
- *
- * Entities must be powered up when part of a pipeline that contains at least
- * one open video device node.
- *
- * To achieve this use the entity use_count field to track the number of users.
- * For entities corresponding to video device nodes the use_count field stores
- * the users count of the node. For entities corresponding to subdevs the
- * use_count field stores the total number of users of all video device nodes
- * in the pipeline.
- *
- * The omap4iss_pipeline_pm_use() function must be called in the open() and
- * close() handlers of video device nodes. It increments or decrements the use
- * count of all subdev entities in the pipeline.
- *
- * To react to link management on powered pipelines, the link setup notification
- * callback updates the use count of all entities in the source and sink sides
- * of the link.
- */
-
-/*
- * iss_pipeline_pm_use_count - Count the number of users of a pipeline
- * @entity: The entity
- *
- * Return the total number of users of all video device nodes in the pipeline.
- */
-static int iss_pipeline_pm_use_count(struct media_entity *entity,
- struct media_entity_graph *graph)
-{
- int use = 0;
-
- media_entity_graph_walk_start(graph, entity);
-
- while ((entity = media_entity_graph_walk_next(graph))) {
- if (is_media_entity_v4l2_io(entity))
- use += entity->use_count;
- }
-
- return use;
-}
-
-/*
- * iss_pipeline_pm_power_one - Apply power change to an entity
- * @entity: The entity
- * @change: Use count change
- *
- * Change the entity use count by @change. If the entity is a subdev update its
- * power state by calling the core::s_power operation when the use count goes
- * from 0 to != 0 or from != 0 to 0.
- *
- * Return 0 on success or a negative error code on failure.
- */
-static int iss_pipeline_pm_power_one(struct media_entity *entity, int change)
-{
- struct v4l2_subdev *subdev;
-
- subdev = is_media_entity_v4l2_subdev(entity)
- ? media_entity_to_v4l2_subdev(entity) : NULL;
-
- if (entity->use_count == 0 && change > 0 && subdev) {
- int ret;
-
- ret = v4l2_subdev_call(subdev, core, s_power, 1);
- if (ret < 0 && ret != -ENOIOCTLCMD)
- return ret;
- }
-
- entity->use_count += change;
- WARN_ON(entity->use_count < 0);
-
- if (entity->use_count == 0 && change < 0 && subdev)
- v4l2_subdev_call(subdev, core, s_power, 0);
-
- return 0;
-}
-
-/*
- * iss_pipeline_pm_power - Apply power change to all entities in a pipeline
- * @entity: The entity
- * @change: Use count change
- *
- * Walk the pipeline to update the use count and the power state of all non-node
- * entities.
- *
- * Return 0 on success or a negative error code on failure.
- */
-static int iss_pipeline_pm_power(struct media_entity *entity, int change,
- struct media_entity_graph *graph)
-{
- struct media_entity *first = entity;
- int ret = 0;
-
- if (!change)
- return 0;
-
- media_entity_graph_walk_start(graph, entity);
-
- while (!ret && (entity = media_entity_graph_walk_next(graph)))
- if (is_media_entity_v4l2_subdev(entity))
- ret = iss_pipeline_pm_power_one(entity, change);
-
- if (!ret)
- return 0;
-
- media_entity_graph_walk_start(graph, first);
-
- while ((first = media_entity_graph_walk_next(graph)) &&
- first != entity)
- if (is_media_entity_v4l2_subdev(first))
- iss_pipeline_pm_power_one(first, -change);
-
- return ret;
-}
-
-/*
- * omap4iss_pipeline_pm_use - Update the use count of an entity
- * @entity: The entity
- * @use: Use (1) or stop using (0) the entity
- *
- * Update the use count of all entities in the pipeline and power entities on or
- * off accordingly.
- *
- * Return 0 on success or a negative error code on failure. Powering entities
- * off is assumed to never fail. No failure can occur when the use parameter is
- * set to 0.
- */
-int omap4iss_pipeline_pm_use(struct media_entity *entity, int use,
- struct media_entity_graph *graph)
-{
- int change = use ? 1 : -1;
- int ret;
-
- mutex_lock(&entity->graph_obj.mdev->graph_mutex);
-
- /* Apply use count to node. */
- entity->use_count += change;
- WARN_ON(entity->use_count < 0);
-
- /* Apply power change to connected non-nodes. */
- ret = iss_pipeline_pm_power(entity, change, graph);
- if (ret < 0)
- entity->use_count -= change;
-
- mutex_unlock(&entity->graph_obj.mdev->graph_mutex);
-
- return ret;
-}
-
-/*
- * iss_pipeline_link_notify - Link management notification callback
- * @link: The link
- * @flags: New link flags that will be applied
- *
- * React to link management on powered pipelines by updating the use count of
- * all entities in the source and sink sides of the link. Entities are powered
- * on or off accordingly.
- *
- * Return 0 on success or a negative error code on failure. Powering entities
- * off is assumed to never fail. This function will not fail for disconnection
- * events.
- */
-static int iss_pipeline_link_notify(struct media_link *link, u32 flags,
- unsigned int notification)
-{
- struct media_entity_graph *graph =
- &container_of(link->graph_obj.mdev, struct iss_device,
- media_dev)->pm_count_graph;
- struct media_entity *source = link->source->entity;
- struct media_entity *sink = link->sink->entity;
- int source_use;
- int sink_use;
- int ret;
-
- if (notification == MEDIA_DEV_NOTIFY_PRE_LINK_CH) {
- ret = media_entity_graph_walk_init(graph,
- link->graph_obj.mdev);
- if (ret)
- return ret;
- }
-
- source_use = iss_pipeline_pm_use_count(source, graph);
- sink_use = iss_pipeline_pm_use_count(sink, graph);
-
- if (notification == MEDIA_DEV_NOTIFY_POST_LINK_CH &&
- !(flags & MEDIA_LNK_FL_ENABLED)) {
- /* Powering off entities is assumed to never fail. */
- iss_pipeline_pm_power(source, -sink_use, graph);
- iss_pipeline_pm_power(sink, -source_use, graph);
- return 0;
- }
-
- if (notification == MEDIA_DEV_NOTIFY_PRE_LINK_CH &&
- (flags & MEDIA_LNK_FL_ENABLED)) {
- ret = iss_pipeline_pm_power(source, sink_use, graph);
- if (ret < 0)
- return ret;
-
- ret = iss_pipeline_pm_power(sink, source_use, graph);
- if (ret < 0)
- iss_pipeline_pm_power(source, -sink_use, graph);
- }
-
- if (notification == MEDIA_DEV_NOTIFY_POST_LINK_CH)
- media_entity_graph_walk_cleanup(graph);
-
- return ret;
-}
-
-/* -----------------------------------------------------------------------------
* Pipeline stream management
*/
@@ -1197,7 +988,7 @@ static int iss_register_entities(struct iss_device *iss)
strlcpy(iss->media_dev.model, "TI OMAP4 ISS",
sizeof(iss->media_dev.model));
iss->media_dev.hw_revision = iss->revision;
- iss->media_dev.link_notify = iss_pipeline_link_notify;
+ iss->media_dev.link_notify = v4l2_pipeline_link_notify;
ret = media_device_register(&iss->media_dev);
if (ret < 0) {
dev_err(iss->dev, "Media device registration failed (%d)\n",
@@ -87,7 +87,6 @@ struct iss_reg {
struct iss_device {
struct v4l2_device v4l2_dev;
struct media_device media_dev;
- struct media_entity_graph pm_count_graph;
struct device *dev;
u32 revision;
@@ -152,9 +151,6 @@ void omap4iss_isp_subclk_enable(struct iss_device *iss,
void omap4iss_isp_subclk_disable(struct iss_device *iss,
enum iss_isp_subclk_resource res);
-int omap4iss_pipeline_pm_use(struct media_entity *entity, int use,
- struct media_entity_graph *graph);
-
int omap4iss_register_entities(struct platform_device *pdev,
struct v4l2_device *v4l2_dev);
void omap4iss_unregister_entities(struct platform_device *pdev);
@@ -1009,13 +1009,7 @@ static int iss_video_open(struct file *file)
goto done;
}
- ret = media_entity_graph_walk_init(&handle->graph,
- &video->iss->media_dev);
- if (ret)
- goto done;
-
- ret = omap4iss_pipeline_pm_use(&video->video.entity, 1,
- &handle->graph);
+ ret = v4l2_pipeline_pm_use(&video->video.entity, 1);
if (ret < 0) {
omap4iss_put(video->iss);
goto done;
@@ -1054,7 +1048,6 @@ static int iss_video_open(struct file *file)
done:
if (ret < 0) {
v4l2_fh_del(&handle->vfh);
- media_entity_graph_walk_cleanup(&handle->graph);
kfree(handle);
}
@@ -1070,13 +1063,11 @@ static int iss_video_release(struct file *file)
/* Disable streaming and free the buffers queue resources. */
iss_video_streamoff(file, vfh, video->type);
- omap4iss_pipeline_pm_use(&video->video.entity, 0, &handle->graph);
+ v4l2_pipeline_pm_use(&video->video.entity, 0);
/* Release the videobuf2 queue */
vb2_queue_release(&handle->queue);
- /* Release the file handle. */
- media_entity_graph_walk_cleanup(&handle->graph);
v4l2_fh_del(vfh);
kfree(handle);
file->private_data = NULL;
@@ -183,7 +183,6 @@ struct iss_video_fh {
struct vb2_queue queue;
struct v4l2_format format;
struct v4l2_fract timeperframe;
- struct media_entity_graph graph;
};
#define to_iss_video_fh(fh) container_of(fh, struct iss_video_fh, vfh)
Power on devices represented by entities in the graph through the pipeline state using V4L2 graph PM operations instead of what was in the omap3isp driver. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- drivers/staging/media/omap4iss/iss.c | 211 +---------------------------- drivers/staging/media/omap4iss/iss.h | 4 - drivers/staging/media/omap4iss/iss_video.c | 13 +- drivers/staging/media/omap4iss/iss_video.h | 1 - 4 files changed, 3 insertions(+), 226 deletions(-)